drivers/regulator/hi6421v600-regulator.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Device driver for regulators in Hisi IC
   4 //
   5 // Copyright (c) 2013 Linaro Ltd.
   6 // Copyright (c) 2011 HiSilicon Ltd.
   7 // Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
   8 //
   9 // Guodong Xu <guodong.xu@linaro.org>
  10
  11 #include <linux/delay.h>
  12 #include <linux/mfd/hi6421-spmi-pmic.h>
  13 #include <linux/module.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/regmap.h>
  16 #include <linux/regulator/driver.h>
  17 #include <linux/spmi.h>
  18
  19 struct hi6421_spmi_reg_priv {
  20         /* Serialize regulator enable logic */
  21         struct mutex enable_mutex;
  22 };
  23
  24 struct hi6421_spmi_reg_info {
  25         struct regulator_desc   desc;
  26         u8                      eco_mode_mask;
  27         u32                     eco_uA;
  28 };
  29
  30 static const unsigned int range_1v5_to_2v0[] = {
  31         1500000, 1550000, 1600000, 1650000,
  32         1700000, 1725000, 1750000, 1775000,
  33         1800000, 1825000, 1850000, 1875000,
  34         1900000, 1925000, 1950000, 2000000
  35 };
  36
  37 static const unsigned int range_1v725_to_1v9[] = {
  38         1725000, 1750000, 1775000, 1800000,
  39         1825000, 1850000, 1875000, 1900000
  40 };
  41
  42 static const unsigned int range_1v75_to_3v3[] = {
  43         1750000, 1800000, 1825000, 2800000,
  44         2850000, 2950000, 3000000, 3300000
  45 };
  46
  47 static const unsigned int range_1v8_to_3v0[] = {
  48         1800000, 1850000, 2400000, 2600000,
  49         2700000, 2850000, 2950000, 3000000
  50 };
  51
  52 static const unsigned int range_2v5_to_3v3[] = {
  53         2500000, 2600000, 2700000, 2800000,
  54         3000000, 3100000, 3200000, 3300000
  55 };
  56
  57 static const unsigned int range_2v6_to_3v3[] = {
  58         2600000, 2700000, 2800000, 2900000,
  59         3000000, 3100000, 3200000, 3300000
  60 };
  61
  62 /**
  63  * HI6421V600_LDO() - specify a LDO power line
  64  * @_id: LDO id name string
  65  * @vtable: voltage table
  66  * @ereg: enable register
  67  * @emask: enable mask
  68  * @vreg: voltage select register
  69  * @odelay: off/on delay time in uS
  70  * @etime: enable time in uS
  71  * @ecomask: eco mode mask
  72  * @ecoamp: eco mode load uppler limit in uA
  73  */
  74 #define HI6421V600_LDO(_id, vtable, ereg, emask, vreg,                         \
  75                        odelay, etime, ecomask, ecoamp)                         \
  76         [hi6421v600_##_id] = {                                                 \
  77                 .desc = {                                                      \
  78                         .name           = #_id,                                \
  79                         .of_match        = of_match_ptr(#_id),                 \
  80                         .regulators_node = of_match_ptr("regulators"),         \
  81                         .ops            = &hi6421_spmi_ldo_rops,               \
  82                         .type           = REGULATOR_VOLTAGE,                   \
  83                         .id             = hi6421v600_##_id,                    \
  84                         .owner          = THIS_MODULE,                         \
  85                         .volt_table     = vtable,                              \
  86                         .n_voltages     = ARRAY_SIZE(vtable),                  \
  87                         .vsel_mask      = ARRAY_SIZE(vtable) - 1,              \
  88                         .vsel_reg       = vreg,                                \
  89                         .enable_reg     = ereg,                                \
  90                         .enable_mask    = emask,                               \
  91                         .enable_time    = etime,                               \
  92                         .ramp_delay     = etime,                               \
  93                         .off_on_delay   = odelay,                              \
  94                 },                                                             \
  95                 .eco_mode_mask          = ecomask,                             \
  96                 .eco_uA                 = ecoamp,                              \
  97         }
  98
  99 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 100 {
 101         struct hi6421_spmi_reg_priv *priv = rdev_get_drvdata(rdev);
 102         int ret;
 103
 104         /* cannot enable more than one regulator at one time */
 105         mutex_lock(&priv->enable_mutex);
 106
 107         ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 108                                  rdev->desc->enable_mask,
 109                                  rdev->desc->enable_mask);
 110
 111         /* Avoid powering up multiple devices at the same time */
 112         usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
 113
 114         mutex_unlock(&priv->enable_mutex);
 115
 116         return ret;
 117 }
 118
 119 static unsigned int hi6421_spmi_regulator_get_mode(struct regulator_dev *rdev)
 120 {
 121         struct hi6421_spmi_reg_info *sreg;
 122         unsigned int reg_val;
 123
 124         sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
 125         regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 126
 127         if (reg_val & sreg->eco_mode_mask)
 128                 return REGULATOR_MODE_IDLE;
 129
 130         return REGULATOR_MODE_NORMAL;
 131 }
 132
 133 static int hi6421_spmi_regulator_set_mode(struct regulator_dev *rdev,
 134                                           unsigned int mode)
 135 {
 136         struct hi6421_spmi_reg_info *sreg;
 137         unsigned int val;
 138
 139         sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
 140         switch (mode) {
 141         case REGULATOR_MODE_NORMAL:
 142                 val = 0;
 143                 break;
 144         case REGULATOR_MODE_IDLE:
 145                 if (!sreg->eco_mode_mask)
 146                         return -EINVAL;
 147
 148                 val = sreg->eco_mode_mask;
 149                 break;
 150         default:
 151                 return -EINVAL;
 152         }
 153
 154         return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 155                                   sreg->eco_mode_mask, val);
 156 }
 157
 158 static unsigned int
 159 hi6421_spmi_regulator_get_optimum_mode(struct regulator_dev *rdev,
 160                                        int input_uV, int output_uV,
 161                                        int load_uA)
 162 {
 163         struct hi6421_spmi_reg_info *sreg;
 164
 165         sreg = container_of(rdev->desc, struct hi6421_spmi_reg_info, desc);
 166
 167         if (!sreg->eco_uA || ((unsigned int)load_uA > sreg->eco_uA))
 168                 return REGULATOR_MODE_NORMAL;
 169
 170         return REGULATOR_MODE_IDLE;
 171 }
 172
 173 static const struct regulator_ops hi6421_spmi_ldo_rops = {
 174         .is_enabled = regulator_is_enabled_regmap,
 175         .enable = hi6421_spmi_regulator_enable,
 176         .disable = regulator_disable_regmap,
 177         .list_voltage = regulator_list_voltage_table,
 178         .map_voltage = regulator_map_voltage_ascend,
 179         .get_voltage_sel = regulator_get_voltage_sel_regmap,
 180         .set_voltage_sel = regulator_set_voltage_sel_regmap,
 181         .get_mode = hi6421_spmi_regulator_get_mode,
 182         .set_mode = hi6421_spmi_regulator_set_mode,
 183         .get_optimum_mode = hi6421_spmi_regulator_get_optimum_mode,
 184 };
 185
 186 /* HI6421v600 regulators with known registers */
 187 enum hi6421_spmi_regulator_id {
 188         hi6421v600_ldo3,
 189         hi6421v600_ldo4,
 190         hi6421v600_ldo9,
 191         hi6421v600_ldo15,
 192         hi6421v600_ldo16,
 193         hi6421v600_ldo17,
 194         hi6421v600_ldo33,
 195         hi6421v600_ldo34,
 196 };
 197
 198 static struct hi6421_spmi_reg_info regulator_info[] = {
 199         HI6421V600_LDO(ldo3, range_1v5_to_2v0,
 200                        0x16, 0x01, 0x51,
 201                        20000, 120,
 202                        0, 0),
 203         HI6421V600_LDO(ldo4, range_1v725_to_1v9,
 204                        0x17, 0x01, 0x52,
 205                        20000, 120,
 206                        0x10, 10000),
 207         HI6421V600_LDO(ldo9, range_1v75_to_3v3,
 208                        0x1c, 0x01, 0x57,
 209                        20000, 360,
 210                        0x10, 10000),
 211         HI6421V600_LDO(ldo15, range_1v8_to_3v0,
 212                        0x21, 0x01, 0x5c,
 213                        20000, 360,
 214                        0x10, 10000),
 215         HI6421V600_LDO(ldo16, range_1v8_to_3v0,
 216                        0x22, 0x01, 0x5d,
 217                        20000, 360,
 218                        0x10, 10000),
 219         HI6421V600_LDO(ldo17, range_2v5_to_3v3,
 220                        0x23, 0x01, 0x5e,
 221                        20000, 120,
 222                        0x10, 10000),
 223         HI6421V600_LDO(ldo33, range_2v5_to_3v3,
 224                        0x32, 0x01, 0x6d,
 225                        20000, 120,
 226                        0, 0),
 227         HI6421V600_LDO(ldo34, range_2v6_to_3v3,
 228                        0x33, 0x01, 0x6e,
 229                        20000, 120,
 230                        0, 0),
 231 };
 232
 233 static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 234 {
 235         struct device *pmic_dev = pdev->dev.parent;
 236         struct regulator_config config = { };
 237         struct hi6421_spmi_reg_priv *priv;
 238         struct hi6421_spmi_reg_info *info;
 239         struct device *dev = &pdev->dev;
 240         struct hi6421_spmi_pmic *pmic;
 241         struct regulator_dev *rdev;
 242         int i;
 243
 244         /*
 245          * This driver is meant to be called by hi6421-spmi-core,
 246          * which should first set drvdata. If this doesn't happen, hit
 247          * a warn on and return.
 248          */
 249         pmic = dev_get_drvdata(pmic_dev);
 250         if (WARN_ON(!pmic))
 251                 return -ENODEV;
 252
 253         priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 254         if (!priv)
 255                 return -ENOMEM;
 256
 257         mutex_init(&priv->enable_mutex);
 258
 259         for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
 260                 info = &regulator_info[i];
 261
 262                 config.dev = pdev->dev.parent;
 263                 config.driver_data = priv;
 264                 config.regmap = pmic->regmap;
 265
 266                 rdev = devm_regulator_register(dev, &info->desc, &config);
 267                 if (IS_ERR(rdev)) {
 268                         dev_err(dev, "failed to register %s\n",
 269                                 info->desc.name);
 270                         return PTR_ERR(rdev);
 271                 }
 272         }
 273
 274         return 0;
 275 }
 276
 277 static const struct platform_device_id hi6421_spmi_regulator_table[] = {
 278         { .name = "hi6421v600-regulator" },
 279         {},
 280 };
 281 MODULE_DEVICE_TABLE(platform, hi6421_spmi_regulator_table);
 282
 283 static struct platform_driver hi6421_spmi_regulator_driver = {
 284         .id_table = hi6421_spmi_regulator_table,
 285         .driver = {
 286                 .name = "hi6421v600-regulator",
 287         },
 288         .probe  = hi6421_spmi_regulator_probe,
 289 };
 290 module_platform_driver(hi6421_spmi_regulator_driver);
 291
 292 MODULE_DESCRIPTION("Hi6421v600 SPMI regulator driver");
 293 MODULE_LICENSE("GPL v2");
 294