drivers/power/supply/ab8500_fg.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) ST-Ericsson AB 2012
   4  *
   5  * Main and Back-up battery management driver.
   6  *
   7  * Note: Backup battery management is required in case of Li-Ion battery and not
   8  * for capacitive battery. HREF boards have capacitive battery and hence backup
   9  * battery management is not used and the supported code is available in this
  10  * driver.
  11  *
  12  * Author:
  13  *      Johan Palsson <johan.palsson@stericsson.com>
  14  *      Karl Komierowski <karl.komierowski@stericsson.com>
  15  *      Arun R Murthy <arun.murthy@stericsson.com>
  16  */
  17
  18 #include <linux/init.h>
  19 #include <linux/module.h>
  20 #include <linux/component.h>
  21 #include <linux/device.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/power_supply.h>
  25 #include <linux/kobject.h>
  26 #include <linux/slab.h>
  27 #include <linux/delay.h>
  28 #include <linux/time.h>
  29 #include <linux/time64.h>
  30 #include <linux/of.h>
  31 #include <linux/completion.h>
  32 #include <linux/mfd/core.h>
  33 #include <linux/mfd/abx500.h>
  34 #include <linux/mfd/abx500/ab8500.h>
  35 #include <linux/iio/consumer.h>
  36 #include <linux/kernel.h>
  37
  38 #include "ab8500-bm.h"
  39
  40 #define MILLI_TO_MICRO                  1000
  41 #define FG_LSB_IN_MA                    1627
  42 #define QLSB_NANO_AMP_HOURS_X10         1071
  43 #define INS_CURR_TIMEOUT                (3 * HZ)
  44
  45 #define SEC_TO_SAMPLE(S)                (S * 4)
  46
  47 #define NBR_AVG_SAMPLES                 20
  48
  49 #define LOW_BAT_CHECK_INTERVAL          (HZ / 16) /* 62.5 ms */
  50
  51 #define VALID_CAPACITY_SEC              (45 * 60) /* 45 minutes */
  52 #define BATT_OK_MIN                     2360 /* mV */
  53 #define BATT_OK_INCREMENT               50 /* mV */
  54 #define BATT_OK_MAX_NR_INCREMENTS       0xE
  55
  56 /* FG constants */
  57 #define BATT_OVV                        0x01
  58
  59 #define interpolate(x, x1, y1, x2, y2) \
  60         ((y1) + ((((y2) - (y1)) * ((x) - (x1))) / ((x2) - (x1))));
  61
  62 /**
  63  * struct ab8500_fg_interrupts - ab8500 fg interrupts
  64  * @name:       name of the interrupt
  65  * @isr         function pointer to the isr
  66  */
  67 struct ab8500_fg_interrupts {
  68         char *name;
  69         irqreturn_t (*isr)(int irq, void *data);
  70 };
  71
  72 enum ab8500_fg_discharge_state {
  73         AB8500_FG_DISCHARGE_INIT,
  74         AB8500_FG_DISCHARGE_INITMEASURING,
  75         AB8500_FG_DISCHARGE_INIT_RECOVERY,
  76         AB8500_FG_DISCHARGE_RECOVERY,
  77         AB8500_FG_DISCHARGE_READOUT_INIT,
  78         AB8500_FG_DISCHARGE_READOUT,
  79         AB8500_FG_DISCHARGE_WAKEUP,
  80 };
  81
  82 static char *discharge_state[] = {
  83         "DISCHARGE_INIT",
  84         "DISCHARGE_INITMEASURING",
  85         "DISCHARGE_INIT_RECOVERY",
  86         "DISCHARGE_RECOVERY",
  87         "DISCHARGE_READOUT_INIT",
  88         "DISCHARGE_READOUT",
  89         "DISCHARGE_WAKEUP",
  90 };
  91
  92 enum ab8500_fg_charge_state {
  93         AB8500_FG_CHARGE_INIT,
  94         AB8500_FG_CHARGE_READOUT,
  95 };
  96
  97 static char *charge_state[] = {
  98         "CHARGE_INIT",
  99         "CHARGE_READOUT",
 100 };
 101
 102 enum ab8500_fg_calibration_state {
 103         AB8500_FG_CALIB_INIT,
 104         AB8500_FG_CALIB_WAIT,
 105         AB8500_FG_CALIB_END,
 106 };
 107
 108 struct ab8500_fg_avg_cap {
 109         int avg;
 110         int samples[NBR_AVG_SAMPLES];
 111         time64_t time_stamps[NBR_AVG_SAMPLES];
 112         int pos;
 113         int nbr_samples;
 114         int sum;
 115 };
 116
 117 struct ab8500_fg_cap_scaling {
 118         bool enable;
 119         int cap_to_scale[2];
 120         int disable_cap_level;
 121         int scaled_cap;
 122 };
 123
 124 struct ab8500_fg_battery_capacity {
 125         int max_mah_design;
 126         int max_mah;
 127         int mah;
 128         int permille;
 129         int level;
 130         int prev_mah;
 131         int prev_percent;
 132         int prev_level;
 133         int user_mah;
 134         struct ab8500_fg_cap_scaling cap_scale;
 135 };
 136
 137 struct ab8500_fg_flags {
 138         bool fg_enabled;
 139         bool conv_done;
 140         bool charging;
 141         bool fully_charged;
 142         bool force_full;
 143         bool low_bat_delay;
 144         bool low_bat;
 145         bool bat_ovv;
 146         bool batt_unknown;
 147         bool calibrate;
 148         bool user_cap;
 149         bool batt_id_received;
 150 };
 151
 152 struct inst_curr_result_list {
 153         struct list_head list;
 154         int *result;
 155 };
 156
 157 /**
 158  * struct ab8500_fg - ab8500 FG device information
 159  * @dev:                Pointer to the structure device
 160  * @node:               a list of AB8500 FGs, hence prepared for reentrance
 161  * @irq                 holds the CCEOC interrupt number
 162  * @vbat:               Battery voltage in mV
 163  * @vbat_nom:           Nominal battery voltage in mV
 164  * @inst_curr:          Instantenous battery current in mA
 165  * @avg_curr:           Average battery current in mA
 166  * @bat_temp            battery temperature
 167  * @fg_samples:         Number of samples used in the FG accumulation
 168  * @accu_charge:        Accumulated charge from the last conversion
 169  * @recovery_cnt:       Counter for recovery mode
 170  * @high_curr_cnt:      Counter for high current mode
 171  * @init_cnt:           Counter for init mode
 172  * @low_bat_cnt         Counter for number of consecutive low battery measures
 173  * @nbr_cceoc_irq_cnt   Counter for number of CCEOC irqs received since enabled
 174  * @recovery_needed:    Indicate if recovery is needed
 175  * @high_curr_mode:     Indicate if we're in high current mode
 176  * @init_capacity:      Indicate if initial capacity measuring should be done
 177  * @turn_off_fg:        True if fg was off before current measurement
 178  * @calib_state         State during offset calibration
 179  * @discharge_state:    Current discharge state
 180  * @charge_state:       Current charge state
 181  * @ab8500_fg_started   Completion struct used for the instant current start
 182  * @ab8500_fg_complete  Completion struct used for the instant current reading
 183  * @flags:              Structure for information about events triggered
 184  * @bat_cap:            Structure for battery capacity specific parameters
 185  * @avg_cap:            Average capacity filter
 186  * @parent:             Pointer to the struct ab8500
 187  * @main_bat_v:         ADC channel for the main battery voltage
 188  * @bm:                 Platform specific battery management information
 189  * @fg_psy:             Structure that holds the FG specific battery properties
 190  * @fg_wq:              Work queue for running the FG algorithm
 191  * @fg_periodic_work:   Work to run the FG algorithm periodically
 192  * @fg_low_bat_work:    Work to check low bat condition
 193  * @fg_reinit_work      Work used to reset and reinitialise the FG algorithm
 194  * @fg_work:            Work to run the FG algorithm instantly
 195  * @fg_acc_cur_work:    Work to read the FG accumulator
 196  * @fg_check_hw_failure_work:   Work for checking HW state
 197  * @cc_lock:            Mutex for locking the CC
 198  * @fg_kobject:         Structure of type kobject
 199  */
 200 struct ab8500_fg {
 201         struct device *dev;
 202         struct list_head node;
 203         int irq;
 204         int vbat;
 205         int vbat_nom;
 206         int inst_curr;
 207         int avg_curr;
 208         int bat_temp;
 209         int fg_samples;
 210         int accu_charge;
 211         int recovery_cnt;
 212         int high_curr_cnt;
 213         int init_cnt;
 214         int low_bat_cnt;
 215         int nbr_cceoc_irq_cnt;
 216         bool recovery_needed;
 217         bool high_curr_mode;
 218         bool init_capacity;
 219         bool turn_off_fg;
 220         enum ab8500_fg_calibration_state calib_state;
 221         enum ab8500_fg_discharge_state discharge_state;
 222         enum ab8500_fg_charge_state charge_state;
 223         struct completion ab8500_fg_started;
 224         struct completion ab8500_fg_complete;
 225         struct ab8500_fg_flags flags;
 226         struct ab8500_fg_battery_capacity bat_cap;
 227         struct ab8500_fg_avg_cap avg_cap;
 228         struct ab8500 *parent;
 229         struct iio_channel *main_bat_v;
 230         struct abx500_bm_data *bm;
 231         struct power_supply *fg_psy;
 232         struct workqueue_struct *fg_wq;
 233         struct delayed_work fg_periodic_work;
 234         struct delayed_work fg_low_bat_work;
 235         struct delayed_work fg_reinit_work;
 236         struct work_struct fg_work;
 237         struct work_struct fg_acc_cur_work;
 238         struct delayed_work fg_check_hw_failure_work;
 239         struct mutex cc_lock;
 240         struct kobject fg_kobject;
 241 };
 242 static LIST_HEAD(ab8500_fg_list);
 243
 244 /**
 245  * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge
 246  * (i.e. the first fuel gauge in the instance list)
 247  */
 248 struct ab8500_fg *ab8500_fg_get(void)
 249 {
 250         return list_first_entry_or_null(&ab8500_fg_list, struct ab8500_fg,
 251                                         node);
 252 }
 253
 254 /* Main battery properties */
 255 static enum power_supply_property ab8500_fg_props[] = {
 256         POWER_SUPPLY_PROP_VOLTAGE_NOW,
 257         POWER_SUPPLY_PROP_CURRENT_NOW,
 258         POWER_SUPPLY_PROP_CURRENT_AVG,
 259         POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 260         POWER_SUPPLY_PROP_ENERGY_FULL,
 261         POWER_SUPPLY_PROP_ENERGY_NOW,
 262         POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
 263         POWER_SUPPLY_PROP_CHARGE_FULL,
 264         POWER_SUPPLY_PROP_CHARGE_NOW,
 265         POWER_SUPPLY_PROP_CAPACITY,
 266         POWER_SUPPLY_PROP_CAPACITY_LEVEL,
 267 };
 268
 269 /*
 270  * This array maps the raw hex value to lowbat voltage used by the AB8500
 271  * Values taken from the UM0836
 272  */
 273 static int ab8500_fg_lowbat_voltage_map[] = {
 274         2300 ,
 275         2325 ,
 276         2350 ,
 277         2375 ,
 278         2400 ,
 279         2425 ,
 280         2450 ,
 281         2475 ,
 282         2500 ,
 283         2525 ,
 284         2550 ,
 285         2575 ,
 286         2600 ,
 287         2625 ,
 288         2650 ,
 289         2675 ,
 290         2700 ,
 291         2725 ,
 292         2750 ,
 293         2775 ,
 294         2800 ,
 295         2825 ,
 296         2850 ,
 297         2875 ,
 298         2900 ,
 299         2925 ,
 300         2950 ,
 301         2975 ,
 302         3000 ,
 303         3025 ,
 304         3050 ,
 305         3075 ,
 306         3100 ,
 307         3125 ,
 308         3150 ,
 309         3175 ,
 310         3200 ,
 311         3225 ,
 312         3250 ,
 313         3275 ,
 314         3300 ,
 315         3325 ,
 316         3350 ,
 317         3375 ,
 318         3400 ,
 319         3425 ,
 320         3450 ,
 321         3475 ,
 322         3500 ,
 323         3525 ,
 324         3550 ,
 325         3575 ,
 326         3600 ,
 327         3625 ,
 328         3650 ,
 329         3675 ,
 330         3700 ,
 331         3725 ,
 332         3750 ,
 333         3775 ,
 334         3800 ,
 335         3825 ,
 336         3850 ,
 337         3850 ,
 338 };
 339
 340 static u8 ab8500_volt_to_regval(int voltage)
 341 {
 342         int i;
 343
 344         if (voltage < ab8500_fg_lowbat_voltage_map[0])
 345                 return 0;
 346
 347         for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) {
 348                 if (voltage < ab8500_fg_lowbat_voltage_map[i])
 349                         return (u8) i - 1;
 350         }
 351
 352         /* If not captured above, return index of last element */
 353         return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1;
 354 }
 355
 356 /**
 357  * ab8500_fg_is_low_curr() - Low or high current mode
 358  * @di:         pointer to the ab8500_fg structure
 359  * @curr:       the current to base or our decision on
 360  *
 361  * Low current mode if the current consumption is below a certain threshold
 362  */
 363 static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
 364 {
 365         /*
 366          * We want to know if we're in low current mode
 367          */
 368         if (curr > -di->bm->fg_params->high_curr_threshold)
 369                 return true;
 370         else
 371                 return false;
 372 }
 373
 374 /**
 375  * ab8500_fg_add_cap_sample() - Add capacity to average filter
 376  * @di:         pointer to the ab8500_fg structure
 377  * @sample:     the capacity in mAh to add to the filter
 378  *
 379  * A capacity is added to the filter and a new mean capacity is calculated and
 380  * returned
 381  */
 382 static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 383 {
 384         time64_t now = ktime_get_boottime_seconds();
 385         struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 386
 387         do {
 388                 avg->sum += sample - avg->samples[avg->pos];
 389                 avg->samples[avg->pos] = sample;
 390                 avg->time_stamps[avg->pos] = now;
 391                 avg->pos++;
 392
 393                 if (avg->pos == NBR_AVG_SAMPLES)
 394                         avg->pos = 0;
 395
 396                 if (avg->nbr_samples < NBR_AVG_SAMPLES)
 397                         avg->nbr_samples++;
 398
 399                 /*
 400                  * Check the time stamp for each sample. If too old,
 401                  * replace with latest sample
 402                  */
 403         } while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
 404
 405         avg->avg = avg->sum / avg->nbr_samples;
 406
 407         return avg->avg;
 408 }
 409
 410 /**
 411  * ab8500_fg_clear_cap_samples() - Clear average filter
 412  * @di:         pointer to the ab8500_fg structure
 413  *
 414  * The capacity filter is is reset to zero.
 415  */
 416 static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
 417 {
 418         int i;
 419         struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 420
 421         avg->pos = 0;
 422         avg->nbr_samples = 0;
 423         avg->sum = 0;
 424         avg->avg = 0;
 425
 426         for (i = 0; i < NBR_AVG_SAMPLES; i++) {
 427                 avg->samples[i] = 0;
 428                 avg->time_stamps[i] = 0;
 429         }
 430 }
 431
 432 /**
 433  * ab8500_fg_fill_cap_sample() - Fill average filter
 434  * @di:         pointer to the ab8500_fg structure
 435  * @sample:     the capacity in mAh to fill the filter with
 436  *
 437  * The capacity filter is filled with a capacity in mAh
 438  */
 439 static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
 440 {
 441         int i;
 442         time64_t now;
 443         struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 444
 445         now = ktime_get_boottime_seconds();
 446
 447         for (i = 0; i < NBR_AVG_SAMPLES; i++) {
 448                 avg->samples[i] = sample;
 449                 avg->time_stamps[i] = now;
 450         }
 451
 452         avg->pos = 0;
 453         avg->nbr_samples = NBR_AVG_SAMPLES;
 454         avg->sum = sample * NBR_AVG_SAMPLES;
 455         avg->avg = sample;
 456 }
 457
 458 /**
 459  * ab8500_fg_coulomb_counter() - enable coulomb counter
 460  * @di:         pointer to the ab8500_fg structure
 461  * @enable:     enable/disable
 462  *
 463  * Enable/Disable coulomb counter.
 464  * On failure returns negative value.
 465  */
 466 static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
 467 {
 468         int ret = 0;
 469         mutex_lock(&di->cc_lock);
 470         if (enable) {
 471                 /* To be able to reprogram the number of samples, we have to
 472                  * first stop the CC and then enable it again */
 473                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 474                         AB8500_RTC_CC_CONF_REG, 0x00);
 475                 if (ret)
 476                         goto cc_err;
 477
 478                 /* Program the samples */
 479                 ret = abx500_set_register_interruptible(di->dev,
 480                         AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
 481                         di->fg_samples);
 482                 if (ret)
 483                         goto cc_err;
 484
 485                 /* Start the CC */
 486                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 487                         AB8500_RTC_CC_CONF_REG,
 488                         (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
 489                 if (ret)
 490                         goto cc_err;
 491
 492                 di->flags.fg_enabled = true;
 493         } else {
 494                 /* Clear any pending read requests */
 495                 ret = abx500_mask_and_set_register_interruptible(di->dev,
 496                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
 497                         (RESET_ACCU | READ_REQ), 0);
 498                 if (ret)
 499                         goto cc_err;
 500
 501                 ret = abx500_set_register_interruptible(di->dev,
 502                         AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0);
 503                 if (ret)
 504                         goto cc_err;
 505
 506                 /* Stop the CC */
 507                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 508                         AB8500_RTC_CC_CONF_REG, 0);
 509                 if (ret)
 510                         goto cc_err;
 511
 512                 di->flags.fg_enabled = false;
 513
 514         }
 515         dev_dbg(di->dev, " CC enabled: %d Samples: %d\n",
 516                 enable, di->fg_samples);
 517
 518         mutex_unlock(&di->cc_lock);
 519
 520         return ret;
 521 cc_err:
 522         dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__);
 523         mutex_unlock(&di->cc_lock);
 524         return ret;
 525 }
 526
 527 /**
 528  * ab8500_fg_inst_curr_start() - start battery instantaneous current
 529  * @di:         pointer to the ab8500_fg structure
 530  *
 531  * Returns 0 or error code
 532  * Note: This is part "one" and has to be called before
 533  * ab8500_fg_inst_curr_finalize()
 534  */
 535 int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
 536 {
 537         u8 reg_val;
 538         int ret;
 539
 540         mutex_lock(&di->cc_lock);
 541
 542         di->nbr_cceoc_irq_cnt = 0;
 543         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
 544                 AB8500_RTC_CC_CONF_REG, &reg_val);
 545         if (ret < 0)
 546                 goto fail;
 547
 548         if (!(reg_val & CC_PWR_UP_ENA)) {
 549                 dev_dbg(di->dev, "%s Enable FG\n", __func__);
 550                 di->turn_off_fg = true;
 551
 552                 /* Program the samples */
 553                 ret = abx500_set_register_interruptible(di->dev,
 554                         AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
 555                         SEC_TO_SAMPLE(10));
 556                 if (ret)
 557                         goto fail;
 558
 559                 /* Start the CC */
 560                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 561                         AB8500_RTC_CC_CONF_REG,
 562                         (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
 563                 if (ret)
 564                         goto fail;
 565         } else {
 566                 di->turn_off_fg = false;
 567         }
 568
 569         /* Return and WFI */
 570         reinit_completion(&di->ab8500_fg_started);
 571         reinit_completion(&di->ab8500_fg_complete);
 572         enable_irq(di->irq);
 573
 574         /* Note: cc_lock is still locked */
 575         return 0;
 576 fail:
 577         mutex_unlock(&di->cc_lock);
 578         return ret;
 579 }
 580
 581 /**
 582  * ab8500_fg_inst_curr_started() - check if fg conversion has started
 583  * @di:         pointer to the ab8500_fg structure
 584  *
 585  * Returns 1 if conversion started, 0 if still waiting
 586  */
 587 int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
 588 {
 589         return completion_done(&di->ab8500_fg_started);
 590 }
 591
 592 /**
 593  * ab8500_fg_inst_curr_done() - check if fg conversion is done
 594  * @di:         pointer to the ab8500_fg structure
 595  *
 596  * Returns 1 if conversion done, 0 if still waiting
 597  */
 598 int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
 599 {
 600         return completion_done(&di->ab8500_fg_complete);
 601 }
 602
 603 /**
 604  * ab8500_fg_inst_curr_finalize() - battery instantaneous current
 605  * @di:         pointer to the ab8500_fg structure
 606  * @res:        battery instantenous current(on success)
 607  *
 608  * Returns 0 or an error code
 609  * Note: This is part "two" and has to be called at earliest 250 ms
 610  * after ab8500_fg_inst_curr_start()
 611  */
 612 int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
 613 {
 614         u8 low, high;
 615         int val;
 616         int ret;
 617         unsigned long timeout;
 618
 619         if (!completion_done(&di->ab8500_fg_complete)) {
 620                 timeout = wait_for_completion_timeout(
 621                         &di->ab8500_fg_complete,
 622                         INS_CURR_TIMEOUT);
 623                 dev_dbg(di->dev, "Finalize time: %d ms\n",
 624                         jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
 625                 if (!timeout) {
 626                         ret = -ETIME;
 627                         disable_irq(di->irq);
 628                         di->nbr_cceoc_irq_cnt = 0;
 629                         dev_err(di->dev, "completion timed out [%d]\n",
 630                                 __LINE__);
 631                         goto fail;
 632                 }
 633         }
 634
 635         disable_irq(di->irq);
 636         di->nbr_cceoc_irq_cnt = 0;
 637
 638         ret = abx500_mask_and_set_register_interruptible(di->dev,
 639                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
 640                         READ_REQ, READ_REQ);
 641
 642         /* 100uS between read request and read is needed */
 643         usleep_range(100, 100);
 644
 645         /* Read CC Sample conversion value Low and high */
 646         ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 647                 AB8500_GASG_CC_SMPL_CNVL_REG,  &low);
 648         if (ret < 0)
 649                 goto fail;
 650
 651         ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 652                 AB8500_GASG_CC_SMPL_CNVH_REG,  &high);
 653         if (ret < 0)
 654                 goto fail;
 655
 656         /*
 657          * negative value for Discharging
 658          * convert 2's complement into decimal
 659          */
 660         if (high & 0x10)
 661                 val = (low | (high << 8) | 0xFFFFE000);
 662         else
 663                 val = (low | (high << 8));
 664
 665         /*
 666          * Convert to unit value in mA
 667          * Full scale input voltage is
 668          * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA
 669          * Given a 250ms conversion cycle time the LSB corresponds
 670          * to 107.1 nAh. Convert to current by dividing by the conversion
 671          * time in hours (250ms = 1 / (3600 * 4)h)
 672          * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
 673          */
 674         val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
 675                 (1000 * di->bm->fg_res);
 676
 677         if (di->turn_off_fg) {
 678                 dev_dbg(di->dev, "%s Disable FG\n", __func__);
 679
 680                 /* Clear any pending read requests */
 681                 ret = abx500_set_register_interruptible(di->dev,
 682                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
 683                 if (ret)
 684                         goto fail;
 685
 686                 /* Stop the CC */
 687                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
 688                         AB8500_RTC_CC_CONF_REG, 0);
 689                 if (ret)
 690                         goto fail;
 691         }
 692         mutex_unlock(&di->cc_lock);
 693         (*res) = val;
 694
 695         return 0;
 696 fail:
 697         mutex_unlock(&di->cc_lock);
 698         return ret;
 699 }
 700
 701 /**
 702  * ab8500_fg_inst_curr_blocking() - battery instantaneous current
 703  * @di:         pointer to the ab8500_fg structure
 704  * @res:        battery instantenous current(on success)
 705  *
 706  * Returns 0 else error code
 707  */
 708 int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
 709 {
 710         int ret;
 711         unsigned long timeout;
 712         int res = 0;
 713
 714         ret = ab8500_fg_inst_curr_start(di);
 715         if (ret) {
 716                 dev_err(di->dev, "Failed to initialize fg_inst\n");
 717                 return 0;
 718         }
 719
 720         /* Wait for CC to actually start */
 721         if (!completion_done(&di->ab8500_fg_started)) {
 722                 timeout = wait_for_completion_timeout(
 723                         &di->ab8500_fg_started,
 724                         INS_CURR_TIMEOUT);
 725                 dev_dbg(di->dev, "Start time: %d ms\n",
 726                         jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
 727                 if (!timeout) {
 728                         ret = -ETIME;
 729                         dev_err(di->dev, "completion timed out [%d]\n",
 730                                 __LINE__);
 731                         goto fail;
 732                 }
 733         }
 734
 735         ret = ab8500_fg_inst_curr_finalize(di, &res);
 736         if (ret) {
 737                 dev_err(di->dev, "Failed to finalize fg_inst\n");
 738                 return 0;
 739         }
 740
 741         dev_dbg(di->dev, "%s instant current: %d", __func__, res);
 742         return res;
 743 fail:
 744         disable_irq(di->irq);
 745         mutex_unlock(&di->cc_lock);
 746         return ret;
 747 }
 748
 749 /**
 750  * ab8500_fg_acc_cur_work() - average battery current
 751  * @work:       pointer to the work_struct structure
 752  *
 753  * Updated the average battery current obtained from the
 754  * coulomb counter.
 755  */
 756 static void ab8500_fg_acc_cur_work(struct work_struct *work)
 757 {
 758         int val;
 759         int ret;
 760         u8 low, med, high;
 761
 762         struct ab8500_fg *di = container_of(work,
 763                 struct ab8500_fg, fg_acc_cur_work);
 764
 765         mutex_lock(&di->cc_lock);
 766         ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 767                 AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ);
 768         if (ret)
 769                 goto exit;
 770
 771         ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 772                 AB8500_GASG_CC_NCOV_ACCU_LOW,  &low);
 773         if (ret < 0)
 774                 goto exit;
 775
 776         ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 777                 AB8500_GASG_CC_NCOV_ACCU_MED,  &med);
 778         if (ret < 0)
 779                 goto exit;
 780
 781         ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
 782                 AB8500_GASG_CC_NCOV_ACCU_HIGH, &high);
 783         if (ret < 0)
 784                 goto exit;
 785
 786         /* Check for sign bit in case of negative value, 2's complement */
 787         if (high & 0x10)
 788                 val = (low | (med << 8) | (high << 16) | 0xFFE00000);
 789         else
 790                 val = (low | (med << 8) | (high << 16));
 791
 792         /*
 793          * Convert to uAh
 794          * Given a 250ms conversion cycle time the LSB corresponds
 795          * to 112.9 nAh.
 796          * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
 797          */
 798         di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
 799                 (100 * di->bm->fg_res);
 800
 801         /*
 802          * Convert to unit value in mA
 803          * by dividing by the conversion
 804          * time in hours (= samples / (3600 * 4)h)
 805          * and multiply with 1000
 806          */
 807         di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
 808                 (1000 * di->bm->fg_res * (di->fg_samples / 4));
 809
 810         di->flags.conv_done = true;
 811
 812         mutex_unlock(&di->cc_lock);
 813
 814         queue_work(di->fg_wq, &di->fg_work);
 815
 816         dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
 817                                 di->bm->fg_res, di->fg_samples, val, di->accu_charge);
 818         return;
 819 exit:
 820         dev_err(di->dev,
 821                 "Failed to read or write gas gauge registers\n");
 822         mutex_unlock(&di->cc_lock);
 823         queue_work(di->fg_wq, &di->fg_work);
 824 }
 825
 826 /**
 827  * ab8500_fg_bat_voltage() - get battery voltage
 828  * @di:         pointer to the ab8500_fg structure
 829  *
 830  * Returns battery voltage(on success) else error code
 831  */
 832 static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
 833 {
 834         int vbat, ret;
 835         static int prev;
 836
 837         ret = iio_read_channel_processed(di->main_bat_v, &vbat);
 838         if (ret < 0) {
 839                 dev_err(di->dev,
 840                         "%s ADC conversion failed, using previous value\n",
 841                         __func__);
 842                 return prev;
 843         }
 844
 845         prev = vbat;
 846         return vbat;
 847 }
 848
 849 /**
 850  * ab8500_fg_volt_to_capacity() - Voltage based capacity
 851  * @di:         pointer to the ab8500_fg structure
 852  * @voltage:    The voltage to convert to a capacity
 853  *
 854  * Returns battery capacity in per mille based on voltage
 855  */
 856 static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
 857 {
 858         int i, tbl_size;
 859         const struct abx500_v_to_cap *tbl;
 860         int cap = 0;
 861
 862         tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl;
 863         tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
 864
 865         for (i = 0; i < tbl_size; ++i) {
 866                 if (voltage > tbl[i].voltage)
 867                         break;
 868         }
 869
 870         if ((i > 0) && (i < tbl_size)) {
 871                 cap = interpolate(voltage,
 872                         tbl[i].voltage,
 873                         tbl[i].capacity * 10,
 874                         tbl[i-1].voltage,
 875                         tbl[i-1].capacity * 10);
 876         } else if (i == 0) {
 877                 cap = 1000;
 878         } else {
 879                 cap = 0;
 880         }
 881
 882         dev_dbg(di->dev, "%s Vbat: %d, Cap: %d per mille",
 883                 __func__, voltage, cap);
 884
 885         return cap;
 886 }
 887
 888 /**
 889  * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity
 890  * @di:         pointer to the ab8500_fg structure
 891  *
 892  * Returns battery capacity based on battery voltage that is not compensated
 893  * for the voltage drop due to the load
 894  */
 895 static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
 896 {
 897         di->vbat = ab8500_fg_bat_voltage(di);
 898         return ab8500_fg_volt_to_capacity(di, di->vbat);
 899 }
 900
 901 /**
 902  * ab8500_fg_battery_resistance() - Returns the battery inner resistance
 903  * @di:         pointer to the ab8500_fg structure
 904  *
 905  * Returns battery inner resistance added with the fuel gauge resistor value
 906  * to get the total resistance in the whole link from gnd to bat+ node.
 907  */
 908 static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
 909 {
 910         int i, tbl_size;
 911         const struct batres_vs_temp *tbl;
 912         int resist = 0;
 913
 914         tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
 915         tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
 916
 917         for (i = 0; i < tbl_size; ++i) {
 918                 if (di->bat_temp / 10 > tbl[i].temp)
 919                         break;
 920         }
 921
 922         if ((i > 0) && (i < tbl_size)) {
 923                 resist = interpolate(di->bat_temp / 10,
 924                         tbl[i].temp,
 925                         tbl[i].resist,
 926                         tbl[i-1].temp,
 927                         tbl[i-1].resist);
 928         } else if (i == 0) {
 929                 resist = tbl[0].resist;
 930         } else {
 931                 resist = tbl[tbl_size - 1].resist;
 932         }
 933
 934         dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
 935             " fg resistance %d, total: %d (mOhm)\n",
 936                 __func__, di->bat_temp, resist, di->bm->fg_res / 10,
 937                 (di->bm->fg_res / 10) + resist);
 938
 939         /* fg_res variable is in 0.1mOhm */
 940         resist += di->bm->fg_res / 10;
 941
 942         return resist;
 943 }
 944
 945 /**
 946  * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity
 947  * @di:         pointer to the ab8500_fg structure
 948  *
 949  * Returns battery capacity based on battery voltage that is load compensated
 950  * for the voltage drop
 951  */
 952 static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
 953 {
 954         int vbat_comp, res;
 955         int i = 0;
 956         int vbat = 0;
 957
 958         ab8500_fg_inst_curr_start(di);
 959
 960         do {
 961                 vbat += ab8500_fg_bat_voltage(di);
 962                 i++;
 963                 usleep_range(5000, 6000);
 964         } while (!ab8500_fg_inst_curr_done(di));
 965
 966         ab8500_fg_inst_curr_finalize(di, &di->inst_curr);
 967
 968         di->vbat = vbat / i;
 969         res = ab8500_fg_battery_resistance(di);
 970
 971         /* Use Ohms law to get the load compensated voltage */
 972         vbat_comp = di->vbat - (di->inst_curr * res) / 1000;
 973
 974         dev_dbg(di->dev, "%s Measured Vbat: %dmV,Compensated Vbat %dmV, "
 975                 "R: %dmOhm, Current: %dmA Vbat Samples: %d\n",
 976                 __func__, di->vbat, vbat_comp, res, di->inst_curr, i);
 977
 978         return ab8500_fg_volt_to_capacity(di, vbat_comp);
 979 }
 980
 981 /**
 982  * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille
 983  * @di:         pointer to the ab8500_fg structure
 984  * @cap_mah:    capacity in mAh
 985  *
 986  * Converts capacity in mAh to capacity in permille
 987  */
 988 static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah)
 989 {
 990         return (cap_mah * 1000) / di->bat_cap.max_mah_design;
 991 }
 992
 993 /**
 994  * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh
 995  * @di:         pointer to the ab8500_fg structure
 996  * @cap_pm:     capacity in permille
 997  *
 998  * Converts capacity in permille to capacity in mAh
 999  */
1000 static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm)
1001 {
1002         return cap_pm * di->bat_cap.max_mah_design / 1000;
1003 }
1004
1005 /**
1006  * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh
1007  * @di:         pointer to the ab8500_fg structure
1008  * @cap_mah:    capacity in mAh
1009  *
1010  * Converts capacity in mAh to capacity in uWh
1011  */
1012 static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah)
1013 {
1014         u64 div_res;
1015         u32 div_rem;
1016
1017         div_res = ((u64) cap_mah) * ((u64) di->vbat_nom);
1018         div_rem = do_div(div_res, 1000);
1019
1020         /* Make sure to round upwards if necessary */
1021         if (div_rem >= 1000 / 2)
1022                 div_res++;
1023
1024         return (int) div_res;
1025 }
1026
1027 /**
1028  * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging
1029  * @di:         pointer to the ab8500_fg structure
1030  *
1031  * Return the capacity in mAh based on previous calculated capcity and the FG
1032  * accumulator register value. The filter is filled with this capacity
1033  */
1034 static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di)
1035 {
1036         dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
1037                 __func__,
1038                 di->bat_cap.mah,
1039                 di->accu_charge);
1040
1041         /* Capacity should not be less than 0 */
1042         if (di->bat_cap.mah + di->accu_charge > 0)
1043                 di->bat_cap.mah += di->accu_charge;
1044         else
1045                 di->bat_cap.mah = 0;
1046         /*
1047          * We force capacity to 100% once when the algorithm
1048          * reports that it's full.
1049          */
1050         if (di->bat_cap.mah >= di->bat_cap.max_mah_design ||
1051                 di->flags.force_full) {
1052                 di->bat_cap.mah = di->bat_cap.max_mah_design;
1053         }
1054
1055         ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
1056         di->bat_cap.permille =
1057                 ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
1058
1059         /* We need to update battery voltage and inst current when charging */
1060         di->vbat = ab8500_fg_bat_voltage(di);
1061         di->inst_curr = ab8500_fg_inst_curr_blocking(di);
1062
1063         return di->bat_cap.mah;
1064 }
1065
1066 /**
1067  * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage
1068  * @di:         pointer to the ab8500_fg structure
1069  * @comp:       if voltage should be load compensated before capacity calc
1070  *
1071  * Return the capacity in mAh based on the battery voltage. The voltage can
1072  * either be load compensated or not. This value is added to the filter and a
1073  * new mean value is calculated and returned.
1074  */
1075 static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di, bool comp)
1076 {
1077         int permille, mah;
1078
1079         if (comp)
1080                 permille = ab8500_fg_load_comp_volt_to_capacity(di);
1081         else
1082                 permille = ab8500_fg_uncomp_volt_to_capacity(di);
1083
1084         mah = ab8500_fg_convert_permille_to_mah(di, permille);
1085
1086         di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah);
1087         di->bat_cap.permille =
1088                 ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
1089
1090         return di->bat_cap.mah;
1091 }
1092
1093 /**
1094  * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG
1095  * @di:         pointer to the ab8500_fg structure
1096  *
1097  * Return the capacity in mAh based on previous calculated capcity and the FG
1098  * accumulator register value. This value is added to the filter and a
1099  * new mean value is calculated and returned.
1100  */
1101 static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di)
1102 {
1103         int permille_volt, permille;
1104
1105         dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
1106                 __func__,
1107                 di->bat_cap.mah,
1108                 di->accu_charge);
1109
1110         /* Capacity should not be less than 0 */
1111         if (di->bat_cap.mah + di->accu_charge > 0)
1112                 di->bat_cap.mah += di->accu_charge;
1113         else
1114                 di->bat_cap.mah = 0;
1115
1116         if (di->bat_cap.mah >= di->bat_cap.max_mah_design)
1117                 di->bat_cap.mah = di->bat_cap.max_mah_design;
1118
1119         /*
1120          * Check against voltage based capacity. It can not be lower
1121          * than what the uncompensated voltage says
1122          */
1123         permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
1124         permille_volt = ab8500_fg_uncomp_volt_to_capacity(di);
1125
1126         if (permille < permille_volt) {
1127                 di->bat_cap.permille = permille_volt;
1128                 di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di,
1129                         di->bat_cap.permille);
1130
1131                 dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n",
1132                         __func__,
1133                         permille,
1134                         permille_volt);
1135
1136                 ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
1137         } else {
1138                 ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
1139                 di->bat_cap.permille =
1140                         ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
1141         }
1142
1143         return di->bat_cap.mah;
1144 }
1145
1146 /**
1147  * ab8500_fg_capacity_level() - Get the battery capacity level
1148  * @di:         pointer to the ab8500_fg structure
1149  *
1150  * Get the battery capacity level based on the capacity in percent
1151  */
1152 static int ab8500_fg_capacity_level(struct ab8500_fg *di)
1153 {
1154         int ret, percent;
1155
1156         percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
1157
1158         if (percent <= di->bm->cap_levels->critical ||
1159                 di->flags.low_bat)
1160                 ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
1161         else if (percent <= di->bm->cap_levels->low)
1162                 ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
1163         else if (percent <= di->bm->cap_levels->normal)
1164                 ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
1165         else if (percent <= di->bm->cap_levels->high)
1166                 ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
1167         else
1168                 ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
1169
1170         return ret;
1171 }
1172
1173 /**
1174  * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
1175  * @di:         pointer to the ab8500_fg structure
1176  *
1177  * Calculates the capacity to be shown to upper layers. Scales the capacity
1178  * to have 100% as a reference from the actual capacity upon removal of charger
1179  * when charging is in maintenance mode.
1180  */
1181 static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
1182 {
1183         struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
1184         int capacity = di->bat_cap.prev_percent;
1185
1186         if (!cs->enable)
1187                 return capacity;
1188
1189         /*
1190          * As long as we are in fully charge mode scale the capacity
1191          * to show 100%.
1192          */
1193         if (di->flags.fully_charged) {
1194                 cs->cap_to_scale[0] = 100;
1195                 cs->cap_to_scale[1] =
1196                         max(capacity, di->bm->fg_params->maint_thres);
1197                 dev_dbg(di->dev, "Scale cap with %d/%d\n",
1198                          cs->cap_to_scale[0], cs->cap_to_scale[1]);
1199         }
1200
1201         /* Calculates the scaled capacity. */
1202         if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
1203                                         && (cs->cap_to_scale[1] > 0))
1204                 capacity = min(100,
1205                                  DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
1206                                                  cs->cap_to_scale[0],
1207                                                  cs->cap_to_scale[1]));
1208
1209         if (di->flags.charging) {
1210                 if (capacity < cs->disable_cap_level) {
1211                         cs->disable_cap_level = capacity;
1212                         dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
1213                                 cs->disable_cap_level);
1214                 } else if (!di->flags.fully_charged) {
1215                         if (di->bat_cap.prev_percent >=
1216                             cs->disable_cap_level) {
1217                                 dev_dbg(di->dev, "Disabling scaled capacity\n");
1218                                 cs->enable = false;
1219                                 capacity = di->bat_cap.prev_percent;
1220                         } else {
1221                                 dev_dbg(di->dev,
1222                                         "Waiting in cap to level %d%%\n",
1223                                         cs->disable_cap_level);
1224                                 capacity = cs->disable_cap_level;
1225                         }
1226                 }
1227         }
1228
1229         return capacity;
1230 }
1231
1232 /**
1233  * ab8500_fg_update_cap_scalers() - Capacity scaling
1234  * @di:         pointer to the ab8500_fg structure
1235  *
1236  * To be called when state change from charge<->discharge to update
1237  * the capacity scalers.
1238  */
1239 static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
1240 {
1241         struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
1242
1243         if (!cs->enable)
1244                 return;
1245         if (di->flags.charging) {
1246                 di->bat_cap.cap_scale.disable_cap_level =
1247                         di->bat_cap.cap_scale.scaled_cap;
1248                 dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
1249                                 di->bat_cap.cap_scale.disable_cap_level);
1250         } else {
1251                 if (cs->scaled_cap != 100) {
1252                         cs->cap_to_scale[0] = cs->scaled_cap;
1253                         cs->cap_to_scale[1] = di->bat_cap.prev_percent;
1254                 } else {
1255                         cs->cap_to_scale[0] = 100;
1256                         cs->cap_to_scale[1] =
1257                                 max(di->bat_cap.prev_percent,
1258                                     di->bm->fg_params->maint_thres);
1259                 }
1260
1261                 dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
1262                                 cs->cap_to_scale[0], cs->cap_to_scale[1]);
1263         }
1264 }
1265
1266 /**
1267  * ab8500_fg_check_capacity_limits() - Check if capacity has changed
1268  * @di:         pointer to the ab8500_fg structure
1269  * @init:       capacity is allowed to go up in init mode
1270  *
1271  * Check if capacity or capacity limit has changed and notify the system
1272  * about it using the power_supply framework
1273  */
1274 static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
1275 {
1276         bool changed = false;
1277         int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
1278
1279         di->bat_cap.level = ab8500_fg_capacity_level(di);
1280
1281         if (di->bat_cap.level != di->bat_cap.prev_level) {
1282                 /*
1283                  * We do not allow reported capacity level to go up
1284                  * unless we're charging or if we're in init
1285                  */
1286                 if (!(!di->flags.charging && di->bat_cap.level >
1287                         di->bat_cap.prev_level) || init) {
1288                         dev_dbg(di->dev, "level changed from %d to %d\n",
1289                                 di->bat_cap.prev_level,
1290                                 di->bat_cap.level);
1291                         di->bat_cap.prev_level = di->bat_cap.level;
1292                         changed = true;
1293                 } else {
1294                         dev_dbg(di->dev, "level not allowed to go up "
1295                                 "since no charger is connected: %d to %d\n",
1296                                 di->bat_cap.prev_level,
1297                                 di->bat_cap.level);
1298                 }
1299         }
1300
1301         /*
1302          * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate
1303          * shutdown
1304          */
1305         if (di->flags.low_bat) {
1306                 dev_dbg(di->dev, "Battery low, set capacity to 0\n");
1307                 di->bat_cap.prev_percent = 0;
1308                 di->bat_cap.permille = 0;
1309                 percent = 0;
1310                 di->bat_cap.prev_mah = 0;
1311                 di->bat_cap.mah = 0;
1312                 changed = true;
1313         } else if (di->flags.fully_charged) {
1314                 /*
1315                  * We report 100% if algorithm reported fully charged
1316                  * and show 100% during maintenance charging (scaling).
1317                  */
1318                 if (di->flags.force_full) {
1319                         di->bat_cap.prev_percent = percent;
1320                         di->bat_cap.prev_mah = di->bat_cap.mah;
1321
1322                         changed = true;
1323
1324                         if (!di->bat_cap.cap_scale.enable &&
1325                                                 di->bm->capacity_scaling) {
1326                                 di->bat_cap.cap_scale.enable = true;
1327                                 di->bat_cap.cap_scale.cap_to_scale[0] = 100;
1328                                 di->bat_cap.cap_scale.cap_to_scale[1] =
1329                                                 di->bat_cap.prev_percent;
1330                                 di->bat_cap.cap_scale.disable_cap_level = 100;
1331                         }
1332                 } else if (di->bat_cap.prev_percent != percent) {
1333                         dev_dbg(di->dev,
1334                                 "battery reported full "
1335                                 "but capacity dropping: %d\n",
1336                                 percent);
1337                         di->bat_cap.prev_percent = percent;
1338                         di->bat_cap.prev_mah = di->bat_cap.mah;
1339
1340                         changed = true;
1341                 }
1342         } else if (di->bat_cap.prev_percent != percent) {
1343                 if (percent == 0) {
1344                         /*
1345                          * We will not report 0% unless we've got
1346                          * the LOW_BAT IRQ, no matter what the FG
1347                          * algorithm says.
1348                          */
1349                         di->bat_cap.prev_percent = 1;
1350                         percent = 1;
1351
1352                         changed = true;
1353                 } else if (!(!di->flags.charging &&
1354                         percent > di->bat_cap.prev_percent) || init) {
1355                         /*
1356                          * We do not allow reported capacity to go up
1357                          * unless we're charging or if we're in init
1358                          */
1359                         dev_dbg(di->dev,
1360                                 "capacity changed from %d to %d (%d)\n",
1361                                 di->bat_cap.prev_percent,
1362                                 percent,
1363                                 di->bat_cap.permille);
1364                         di->bat_cap.prev_percent = percent;
1365                         di->bat_cap.prev_mah = di->bat_cap.mah;
1366
1367                         changed = true;
1368                 } else {
1369                         dev_dbg(di->dev, "capacity not allowed to go up since "
1370                                 "no charger is connected: %d to %d (%d)\n",
1371                                 di->bat_cap.prev_percent,
1372                                 percent,
1373                                 di->bat_cap.permille);
1374                 }
1375         }
1376
1377         if (changed) {
1378                 if (di->bm->capacity_scaling) {
1379                         di->bat_cap.cap_scale.scaled_cap =
1380                                 ab8500_fg_calculate_scaled_capacity(di);
1381
1382                         dev_info(di->dev, "capacity=%d (%d)\n",
1383                                 di->bat_cap.prev_percent,
1384                                 di->bat_cap.cap_scale.scaled_cap);
1385                 }
1386                 power_supply_changed(di->fg_psy);
1387                 if (di->flags.fully_charged && di->flags.force_full) {
1388                         dev_dbg(di->dev, "Battery full, notifying.\n");
1389                         di->flags.force_full = false;
1390                         sysfs_notify(&di->fg_kobject, NULL, "charge_full");
1391                 }
1392                 sysfs_notify(&di->fg_kobject, NULL, "charge_now");
1393         }
1394 }
1395
1396 static void ab8500_fg_charge_state_to(struct ab8500_fg *di,
1397         enum ab8500_fg_charge_state new_state)
1398 {
1399         dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n",
1400                 di->charge_state,
1401                 charge_state[di->charge_state],
1402                 new_state,
1403                 charge_state[new_state]);
1404
1405         di->charge_state = new_state;
1406 }
1407
1408 static void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
1409         enum ab8500_fg_discharge_state new_state)
1410 {
1411         dev_dbg(di->dev, "Discharge state from %d [%s] to %d [%s]\n",
1412                 di->discharge_state,
1413                 discharge_state[di->discharge_state],
1414                 new_state,
1415                 discharge_state[new_state]);
1416
1417         di->discharge_state = new_state;
1418 }
1419
1420 /**
1421  * ab8500_fg_algorithm_charging() - FG algorithm for when charging
1422  * @di:         pointer to the ab8500_fg structure
1423  *
1424  * Battery capacity calculation state machine for when we're charging
1425  */
1426 static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
1427 {
1428         /*
1429          * If we change to discharge mode
1430          * we should start with recovery
1431          */
1432         if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY)
1433                 ab8500_fg_discharge_state_to(di,
1434                         AB8500_FG_DISCHARGE_INIT_RECOVERY);
1435
1436         switch (di->charge_state) {
1437         case AB8500_FG_CHARGE_INIT:
1438                 di->fg_samples = SEC_TO_SAMPLE(
1439                         di->bm->fg_params->accu_charging);
1440
1441                 ab8500_fg_coulomb_counter(di, true);
1442                 ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
1443
1444                 break;
1445
1446         case AB8500_FG_CHARGE_READOUT:
1447                 /*
1448                  * Read the FG and calculate the new capacity
1449                  */
1450                 mutex_lock(&di->cc_lock);
1451                 if (!di->flags.conv_done && !di->flags.force_full) {
1452                         /* Wasn't the CC IRQ that got us here */
1453                         mutex_unlock(&di->cc_lock);
1454                         dev_dbg(di->dev, "%s CC conv not done\n",
1455                                 __func__);
1456
1457                         break;
1458                 }
1459                 di->flags.conv_done = false;
1460                 mutex_unlock(&di->cc_lock);
1461
1462                 ab8500_fg_calc_cap_charging(di);
1463
1464                 break;
1465
1466         default:
1467                 break;
1468         }
1469
1470         /* Check capacity limits */
1471         ab8500_fg_check_capacity_limits(di, false);
1472 }
1473
1474 static void force_capacity(struct ab8500_fg *di)
1475 {
1476         int cap;
1477
1478         ab8500_fg_clear_cap_samples(di);
1479         cap = di->bat_cap.user_mah;
1480         if (cap > di->bat_cap.max_mah_design) {
1481                 dev_dbg(di->dev, "Remaining cap %d can't be bigger than total"
1482                         " %d\n", cap, di->bat_cap.max_mah_design);
1483                 cap = di->bat_cap.max_mah_design;
1484         }
1485         ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah);
1486         di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap);
1487         di->bat_cap.mah = cap;
1488         ab8500_fg_check_capacity_limits(di, true);
1489 }
1490
1491 static bool check_sysfs_capacity(struct ab8500_fg *di)
1492 {
1493         int cap, lower, upper;
1494         int cap_permille;
1495
1496         cap = di->bat_cap.user_mah;
1497
1498         cap_permille = ab8500_fg_convert_mah_to_permille(di,
1499                 di->bat_cap.user_mah);
1500
1501         lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
1502         upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
1503
1504         if (lower < 0)
1505                 lower = 0;
1506         /* 1000 is permille, -> 100 percent */
1507         if (upper > 1000)
1508                 upper = 1000;
1509
1510         dev_dbg(di->dev, "Capacity limits:"
1511                 " (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n",
1512                 lower, cap_permille, upper, cap, di->bat_cap.mah);
1513
1514         /* If within limits, use the saved capacity and exit estimation...*/
1515         if (cap_permille > lower && cap_permille < upper) {
1516                 dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap);
1517                 force_capacity(di);
1518                 return true;
1519         }
1520         dev_dbg(di->dev, "Capacity from user out of limits, ignoring");
1521         return false;
1522 }
1523
1524 /**
1525  * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging
1526  * @di:         pointer to the ab8500_fg structure
1527  *
1528  * Battery capacity calculation state machine for when we're discharging
1529  */
1530 static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
1531 {
1532         int sleep_time;
1533
1534         /* If we change to charge mode we should start with init */
1535         if (di->charge_state != AB8500_FG_CHARGE_INIT)
1536                 ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
1537
1538         switch (di->discharge_state) {
1539         case AB8500_FG_DISCHARGE_INIT:
1540                 /* We use the FG IRQ to work on */
1541                 di->init_cnt = 0;
1542                 di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
1543                 ab8500_fg_coulomb_counter(di, true);
1544                 ab8500_fg_discharge_state_to(di,
1545                         AB8500_FG_DISCHARGE_INITMEASURING);
1546
1547                 fallthrough;
1548         case AB8500_FG_DISCHARGE_INITMEASURING:
1549                 /*
1550                  * Discard a number of samples during startup.
1551                  * After that, use compensated voltage for a few
1552                  * samples to get an initial capacity.
1553                  * Then go to READOUT
1554                  */
1555                 sleep_time = di->bm->fg_params->init_timer;
1556
1557                 /* Discard the first [x] seconds */
1558                 if (di->init_cnt > di->bm->fg_params->init_discard_time) {
1559                         ab8500_fg_calc_cap_discharge_voltage(di, true);
1560
1561                         ab8500_fg_check_capacity_limits(di, true);
1562                 }
1563
1564                 di->init_cnt += sleep_time;
1565                 if (di->init_cnt > di->bm->fg_params->init_total_time)
1566                         ab8500_fg_discharge_state_to(di,
1567                                 AB8500_FG_DISCHARGE_READOUT_INIT);
1568
1569                 break;
1570
1571         case AB8500_FG_DISCHARGE_INIT_RECOVERY:
1572                 di->recovery_cnt = 0;
1573                 di->recovery_needed = true;
1574                 ab8500_fg_discharge_state_to(di,
1575                         AB8500_FG_DISCHARGE_RECOVERY);
1576
1577                 fallthrough;
1578
1579         case AB8500_FG_DISCHARGE_RECOVERY:
1580                 sleep_time = di->bm->fg_params->recovery_sleep_timer;
1581
1582                 /*
1583                  * We should check the power consumption
1584                  * If low, go to READOUT (after x min) or
1585                  * RECOVERY_SLEEP if time left.
1586                  * If high, go to READOUT
1587                  */
1588                 di->inst_curr = ab8500_fg_inst_curr_blocking(di);
1589
1590                 if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
1591                         if (di->recovery_cnt >
1592                                 di->bm->fg_params->recovery_total_time) {
1593                                 di->fg_samples = SEC_TO_SAMPLE(
1594                                         di->bm->fg_params->accu_high_curr);
1595                                 ab8500_fg_coulomb_counter(di, true);
1596                                 ab8500_fg_discharge_state_to(di,
1597                                         AB8500_FG_DISCHARGE_READOUT);
1598                                 di->recovery_needed = false;
1599                         } else {
1600                                 queue_delayed_work(di->fg_wq,
1601                                         &di->fg_periodic_work,
1602                                         sleep_time * HZ);
1603                         }
1604                         di->recovery_cnt += sleep_time;
1605                 } else {
1606                         di->fg_samples = SEC_TO_SAMPLE(
1607                                 di->bm->fg_params->accu_high_curr);
1608                         ab8500_fg_coulomb_counter(di, true);
1609                         ab8500_fg_discharge_state_to(di,
1610                                 AB8500_FG_DISCHARGE_READOUT);
1611                 }
1612                 break;
1613
1614         case AB8500_FG_DISCHARGE_READOUT_INIT:
1615                 di->fg_samples = SEC_TO_SAMPLE(
1616                         di->bm->fg_params->accu_high_curr);
1617                 ab8500_fg_coulomb_counter(di, true);
1618                 ab8500_fg_discharge_state_to(di,
1619                                 AB8500_FG_DISCHARGE_READOUT);
1620                 break;
1621
1622         case AB8500_FG_DISCHARGE_READOUT:
1623                 di->inst_curr = ab8500_fg_inst_curr_blocking(di);
1624
1625                 if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
1626                         /* Detect mode change */
1627                         if (di->high_curr_mode) {
1628                                 di->high_curr_mode = false;
1629                                 di->high_curr_cnt = 0;
1630                         }
1631
1632                         if (di->recovery_needed) {
1633                                 ab8500_fg_discharge_state_to(di,
1634                                         AB8500_FG_DISCHARGE_INIT_RECOVERY);
1635
1636                                 queue_delayed_work(di->fg_wq,
1637                                         &di->fg_periodic_work, 0);
1638
1639                                 break;
1640                         }
1641
1642                         ab8500_fg_calc_cap_discharge_voltage(di, true);
1643                 } else {
1644                         mutex_lock(&di->cc_lock);
1645                         if (!di->flags.conv_done) {
1646                                 /* Wasn't the CC IRQ that got us here */
1647                                 mutex_unlock(&di->cc_lock);
1648                                 dev_dbg(di->dev, "%s CC conv not done\n",
1649                                         __func__);
1650
1651                                 break;
1652                         }
1653                         di->flags.conv_done = false;
1654                         mutex_unlock(&di->cc_lock);
1655
1656                         /* Detect mode change */
1657                         if (!di->high_curr_mode) {
1658                                 di->high_curr_mode = true;
1659                                 di->high_curr_cnt = 0;
1660                         }
1661
1662                         di->high_curr_cnt +=
1663                                 di->bm->fg_params->accu_high_curr;
1664                         if (di->high_curr_cnt >
1665                                 di->bm->fg_params->high_curr_time)
1666                                 di->recovery_needed = true;
1667
1668                         ab8500_fg_calc_cap_discharge_fg(di);
1669                 }
1670
1671                 ab8500_fg_check_capacity_limits(di, false);
1672
1673                 break;
1674
1675         case AB8500_FG_DISCHARGE_WAKEUP:
1676                 ab8500_fg_calc_cap_discharge_voltage(di, true);
1677
1678                 di->fg_samples = SEC_TO_SAMPLE(
1679                         di->bm->fg_params->accu_high_curr);
1680                 ab8500_fg_coulomb_counter(di, true);
1681                 ab8500_fg_discharge_state_to(di,
1682                                 AB8500_FG_DISCHARGE_READOUT);
1683
1684                 ab8500_fg_check_capacity_limits(di, false);
1685
1686                 break;
1687
1688         default:
1689                 break;
1690         }
1691 }
1692
1693 /**
1694  * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration
1695  * @di:         pointer to the ab8500_fg structure
1696  *
1697  */
1698 static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di)
1699 {
1700         int ret;
1701
1702         switch (di->calib_state) {
1703         case AB8500_FG_CALIB_INIT:
1704                 dev_dbg(di->dev, "Calibration ongoing...\n");
1705
1706                 ret = abx500_mask_and_set_register_interruptible(di->dev,
1707                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
1708                         CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8);
1709                 if (ret < 0)
1710                         goto err;
1711
1712                 ret = abx500_mask_and_set_register_interruptible(di->dev,
1713                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
1714                         CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA);
1715                 if (ret < 0)
1716                         goto err;
1717                 di->calib_state = AB8500_FG_CALIB_WAIT;
1718                 break;
1719         case AB8500_FG_CALIB_END:
1720                 ret = abx500_mask_and_set_register_interruptible(di->dev,
1721                         AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
1722                         CC_MUXOFFSET, CC_MUXOFFSET);
1723                 if (ret < 0)
1724                         goto err;
1725                 di->flags.calibrate = false;
1726                 dev_dbg(di->dev, "Calibration done...\n");
1727                 queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
1728                 break;
1729         case AB8500_FG_CALIB_WAIT:
1730                 dev_dbg(di->dev, "Calibration WFI\n");
1731         default:
1732                 break;
1733         }
1734         return;
1735 err:
1736         /* Something went wrong, don't calibrate then */
1737         dev_err(di->dev, "failed to calibrate the CC\n");
1738         di->flags.calibrate = false;
1739         di->calib_state = AB8500_FG_CALIB_INIT;
1740         queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
1741 }
1742
1743 /**
1744  * ab8500_fg_algorithm() - Entry point for the FG algorithm
1745  * @di:         pointer to the ab8500_fg structure
1746  *
1747  * Entry point for the battery capacity calculation state machine
1748  */
1749 static void ab8500_fg_algorithm(struct ab8500_fg *di)
1750 {
1751         if (di->flags.calibrate)
1752                 ab8500_fg_algorithm_calibrate(di);
1753         else {
1754                 if (di->flags.charging)
1755                         ab8500_fg_algorithm_charging(di);
1756                 else
1757                         ab8500_fg_algorithm_discharging(di);
1758         }
1759
1760         dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
1761                 "%d %d %d %d %d %d %d\n",
1762                 di->bat_cap.max_mah_design,
1763                 di->bat_cap.max_mah,
1764                 di->bat_cap.mah,
1765                 di->bat_cap.permille,
1766                 di->bat_cap.level,
1767                 di->bat_cap.prev_mah,
1768                 di->bat_cap.prev_percent,
1769                 di->bat_cap.prev_level,
1770                 di->vbat,
1771                 di->inst_curr,
1772                 di->avg_curr,
1773                 di->accu_charge,
1774                 di->flags.charging,
1775                 di->charge_state,
1776                 di->discharge_state,
1777                 di->high_curr_mode,
1778                 di->recovery_needed);
1779 }
1780
1781 /**
1782  * ab8500_fg_periodic_work() - Run the FG state machine periodically
1783  * @work:       pointer to the work_struct structure
1784  *
1785  * Work queue function for periodic work
1786  */
1787 static void ab8500_fg_periodic_work(struct work_struct *work)
1788 {
1789         struct ab8500_fg *di = container_of(work, struct ab8500_fg,
1790                 fg_periodic_work.work);
1791
1792         if (di->init_capacity) {
1793                 /* Get an initial capacity calculation */
1794                 ab8500_fg_calc_cap_discharge_voltage(di, true);
1795                 ab8500_fg_check_capacity_limits(di, true);
1796                 di->init_capacity = false;
1797
1798                 queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
1799         } else if (di->flags.user_cap) {
1800                 if (check_sysfs_capacity(di)) {
1801                         ab8500_fg_check_capacity_limits(di, true);
1802                         if (di->flags.charging)
1803                                 ab8500_fg_charge_state_to(di,
1804                                         AB8500_FG_CHARGE_INIT);
1805                         else
1806                                 ab8500_fg_discharge_state_to(di,
1807                                         AB8500_FG_DISCHARGE_READOUT_INIT);
1808                 }
1809                 di->flags.user_cap = false;
1810                 queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
1811         } else
1812                 ab8500_fg_algorithm(di);
1813
1814 }
1815
1816 /**
1817  * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition
1818  * @work:       pointer to the work_struct structure
1819  *
1820  * Work queue function for checking the OVV_BAT condition
1821  */
1822 static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
1823 {
1824         int ret;
1825         u8 reg_value;
1826
1827         struct ab8500_fg *di = container_of(work, struct ab8500_fg,
1828                 fg_check_hw_failure_work.work);
1829
1830         /*
1831          * If we have had a battery over-voltage situation,
1832          * check ovv-bit to see if it should be reset.
1833          */
1834         ret = abx500_get_register_interruptible(di->dev,
1835                 AB8500_CHARGER, AB8500_CH_STAT_REG,
1836                 &reg_value);
1837         if (ret < 0) {
1838                 dev_err(di->dev, "%s ab8500 read failed\n", __func__);
1839                 return;
1840         }
1841         if ((reg_value & BATT_OVV) == BATT_OVV) {
1842                 if (!di->flags.bat_ovv) {
1843                         dev_dbg(di->dev, "Battery OVV\n");
1844                         di->flags.bat_ovv = true;
1845                         power_supply_changed(di->fg_psy);
1846                 }
1847                 /* Not yet recovered from ovv, reschedule this test */
1848                 queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
1849                                    HZ);
1850                 } else {
1851                         dev_dbg(di->dev, "Battery recovered from OVV\n");
1852                         di->flags.bat_ovv = false;
1853                         power_supply_changed(di->fg_psy);
1854         }
1855 }
1856
1857 /**
1858  * ab8500_fg_low_bat_work() - Check LOW_BAT condition
1859  * @work:       pointer to the work_struct structure
1860  *
1861  * Work queue function for checking the LOW_BAT condition
1862  */
1863 static void ab8500_fg_low_bat_work(struct work_struct *work)
1864 {
1865         int vbat;
1866
1867         struct ab8500_fg *di = container_of(work, struct ab8500_fg,
1868                 fg_low_bat_work.work);
1869
1870         vbat = ab8500_fg_bat_voltage(di);
1871
1872         /* Check if LOW_BAT still fulfilled */
1873         if (vbat < di->bm->fg_params->lowbat_threshold) {
1874                 /* Is it time to shut down? */
1875                 if (di->low_bat_cnt < 1) {
1876                         di->flags.low_bat = true;
1877                         dev_warn(di->dev, "Shut down pending...\n");
1878                 } else {
1879                         /*
1880                         * Else we need to re-schedule this check to be able to detect
1881                         * if the voltage increases again during charging or
1882                         * due to decreasing load.
1883                         */
1884                         di->low_bat_cnt--;
1885                         dev_warn(di->dev, "Battery voltage still LOW\n");
1886                         queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
1887                                 round_jiffies(LOW_BAT_CHECK_INTERVAL));
1888                 }
1889         } else {
1890                 di->flags.low_bat_delay = false;
1891                 di->low_bat_cnt = 10;
1892                 dev_warn(di->dev, "Battery voltage OK again\n");
1893         }
1894
1895         /* This is needed to dispatch LOW_BAT */
1896         ab8500_fg_check_capacity_limits(di, false);
1897 }
1898
1899 /**
1900  * ab8500_fg_battok_calc - calculate the bit pattern corresponding
1901  * to the target voltage.
1902  * @di:       pointer to the ab8500_fg structure
1903  * @target:   target voltage
1904  *
1905  * Returns bit pattern closest to the target voltage
1906  * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS)
1907  */
1908
1909 static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target)
1910 {
1911         if (target > BATT_OK_MIN +
1912                 (BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS))
1913                 return BATT_OK_MAX_NR_INCREMENTS;
1914         if (target < BATT_OK_MIN)
1915                 return 0;
1916         return (target - BATT_OK_MIN) / BATT_OK_INCREMENT;
1917 }
1918
1919 /**
1920  * ab8500_fg_battok_init_hw_register - init battok levels
1921  * @di:       pointer to the ab8500_fg structure
1922  *
1923  */
1924
1925 static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
1926 {
1927         int selected;
1928         int sel0;
1929         int sel1;
1930         int cbp_sel0;
1931         int cbp_sel1;
1932         int ret;
1933         int new_val;
1934
1935         sel0 = di->bm->fg_params->battok_falling_th_sel0;
1936         sel1 = di->bm->fg_params->battok_raising_th_sel1;
1937
1938         cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
1939         cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
1940
1941         selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT;
1942
1943         if (selected != sel0)
1944                 dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
1945                         sel0, selected, cbp_sel0);
1946
1947         selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT;
1948
1949         if (selected != sel1)
1950                 dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
1951                         sel1, selected, cbp_sel1);
1952
1953         new_val = cbp_sel0 | (cbp_sel1 << 4);
1954
1955         dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1);
1956         ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK,
1957                 AB8500_BATT_OK_REG, new_val);
1958         return ret;
1959 }
1960
1961 /**
1962  * ab8500_fg_instant_work() - Run the FG state machine instantly
1963  * @work:       pointer to the work_struct structure
1964  *
1965  * Work queue function for instant work
1966  */
1967 static void ab8500_fg_instant_work(struct work_struct *work)
1968 {
1969         struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work);
1970
1971         ab8500_fg_algorithm(di);
1972 }
1973
1974 /**
1975  * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
1976  * @irq:       interrupt number
1977  * @_di:       pointer to the ab8500_fg structure
1978  *
1979  * Returns IRQ status(IRQ_HANDLED)
1980  */
1981 static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
1982 {
1983         struct ab8500_fg *di = _di;
1984         if (!di->nbr_cceoc_irq_cnt) {
1985                 di->nbr_cceoc_irq_cnt++;
1986                 complete(&di->ab8500_fg_started);
1987         } else {
1988                 di->nbr_cceoc_irq_cnt = 0;
1989                 complete(&di->ab8500_fg_complete);
1990         }
1991         return IRQ_HANDLED;
1992 }
1993
1994 /**
1995  * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
1996  * @irq:       interrupt number
1997  * @_di:       pointer to the ab8500_fg structure
1998  *
1999  * Returns IRQ status(IRQ_HANDLED)
2000  */
2001 static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di)
2002 {
2003         struct ab8500_fg *di = _di;
2004         di->calib_state = AB8500_FG_CALIB_END;
2005         queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
2006         return IRQ_HANDLED;
2007 }
2008
2009 /**
2010  * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
2011  * @irq:       interrupt number
2012  * @_di:       pointer to the ab8500_fg structure
2013  *
2014  * Returns IRQ status(IRQ_HANDLED)
2015  */
2016 static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di)
2017 {
2018         struct ab8500_fg *di = _di;
2019
2020         queue_work(di->fg_wq, &di->fg_acc_cur_work);
2021
2022         return IRQ_HANDLED;
2023 }
2024
2025 /**
2026  * ab8500_fg_batt_ovv_handler() - Battery OVV occured
2027  * @irq:       interrupt number
2028  * @_di:       pointer to the ab8500_fg structure
2029  *
2030  * Returns IRQ status(IRQ_HANDLED)
2031  */
2032 static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di)
2033 {
2034         struct ab8500_fg *di = _di;
2035
2036         dev_dbg(di->dev, "Battery OVV\n");
2037
2038         /* Schedule a new HW failure check */
2039         queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
2040
2041         return IRQ_HANDLED;
2042 }
2043
2044 /**
2045  * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold
2046  * @irq:       interrupt number
2047  * @_di:       pointer to the ab8500_fg structure
2048  *
2049  * Returns IRQ status(IRQ_HANDLED)
2050  */
2051 static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di)
2052 {
2053         struct ab8500_fg *di = _di;
2054
2055         /* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
2056         if (!di->flags.low_bat_delay) {
2057                 dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
2058                 di->flags.low_bat_delay = true;
2059                 /*
2060                  * Start a timer to check LOW_BAT again after some time
2061                  * This is done to avoid shutdown on single voltage dips
2062                  */
2063                 queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
2064                         round_jiffies(LOW_BAT_CHECK_INTERVAL));
2065         }
2066         return IRQ_HANDLED;
2067 }
2068
2069 /**
2070  * ab8500_fg_get_property() - get the fg properties
2071  * @psy:        pointer to the power_supply structure
2072  * @psp:        pointer to the power_supply_property structure
2073  * @val:        pointer to the power_supply_propval union
2074  *
2075  * This function gets called when an application tries to get the
2076  * fg properties by reading the sysfs files.
2077  * voltage_now:         battery voltage
2078  * current_now:         battery instant current
2079  * current_avg:         battery average current
2080  * charge_full_design:  capacity where battery is considered full
2081  * charge_now:          battery capacity in nAh
2082  * capacity:            capacity in percent
2083  * capacity_level:      capacity level
2084  *
2085  * Returns error code in case of failure else 0 on success
2086  */
2087 static int ab8500_fg_get_property(struct power_supply *psy,
2088         enum power_supply_property psp,
2089         union power_supply_propval *val)
2090 {
2091         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2092
2093         /*
2094          * If battery is identified as unknown and charging of unknown
2095          * batteries is disabled, we always report 100% capacity and
2096          * capacity level UNKNOWN, since we can't calculate
2097          * remaining capacity
2098          */
2099
2100         switch (psp) {
2101         case POWER_SUPPLY_PROP_VOLTAGE_NOW:
2102                 if (di->flags.bat_ovv)
2103                         val->intval = BATT_OVV_VALUE * 1000;
2104                 else
2105                         val->intval = di->vbat * 1000;
2106                 break;
2107         case POWER_SUPPLY_PROP_CURRENT_NOW:
2108                 val->intval = di->inst_curr * 1000;
2109                 break;
2110         case POWER_SUPPLY_PROP_CURRENT_AVG:
2111                 val->intval = di->avg_curr * 1000;
2112                 break;
2113         case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
2114                 val->intval = ab8500_fg_convert_mah_to_uwh(di,
2115                                 di->bat_cap.max_mah_design);
2116                 break;
2117         case POWER_SUPPLY_PROP_ENERGY_FULL:
2118                 val->intval = ab8500_fg_convert_mah_to_uwh(di,
2119                                 di->bat_cap.max_mah);
2120                 break;
2121         case POWER_SUPPLY_PROP_ENERGY_NOW:
2122                 if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
2123                                 di->flags.batt_id_received)
2124                         val->intval = ab8500_fg_convert_mah_to_uwh(di,
2125                                         di->bat_cap.max_mah);
2126                 else
2127                         val->intval = ab8500_fg_convert_mah_to_uwh(di,
2128                                         di->bat_cap.prev_mah);
2129                 break;
2130         case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
2131                 val->intval = di->bat_cap.max_mah_design;
2132                 break;
2133         case POWER_SUPPLY_PROP_CHARGE_FULL:
2134                 val->intval = di->bat_cap.max_mah;
2135                 break;
2136         case POWER_SUPPLY_PROP_CHARGE_NOW:
2137                 if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
2138                                 di->flags.batt_id_received)
2139                         val->intval = di->bat_cap.max_mah;
2140                 else
2141                         val->intval = di->bat_cap.prev_mah;
2142                 break;
2143         case POWER_SUPPLY_PROP_CAPACITY:
2144                 if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
2145                                 di->flags.batt_id_received)
2146                         val->intval = 100;
2147                 else
2148                         val->intval = di->bat_cap.prev_percent;
2149                 break;
2150         case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
2151                 if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
2152                                 di->flags.batt_id_received)
2153                         val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
2154                 else
2155                         val->intval = di->bat_cap.prev_level;
2156                 break;
2157         default:
2158                 return -EINVAL;
2159         }
2160         return 0;
2161 }
2162
2163 static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
2164 {
2165         struct power_supply *psy;
2166         struct power_supply *ext = dev_get_drvdata(dev);
2167         const char **supplicants = (const char **)ext->supplied_to;
2168         struct ab8500_fg *di;
2169         union power_supply_propval ret;
2170         int j;
2171
2172         psy = (struct power_supply *)data;
2173         di = power_supply_get_drvdata(psy);
2174
2175         /*
2176          * For all psy where the name of your driver
2177          * appears in any supplied_to
2178          */
2179         j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
2180         if (j < 0)
2181                 return 0;
2182
2183         /* Go through all properties for the psy */
2184         for (j = 0; j < ext->desc->num_properties; j++) {
2185                 enum power_supply_property prop;
2186                 prop = ext->desc->properties[j];
2187
2188                 if (power_supply_get_property(ext, prop, &ret))
2189                         continue;
2190
2191                 switch (prop) {
2192                 case POWER_SUPPLY_PROP_STATUS:
2193                         switch (ext->desc->type) {
2194                         case POWER_SUPPLY_TYPE_BATTERY:
2195                                 switch (ret.intval) {
2196                                 case POWER_SUPPLY_STATUS_UNKNOWN:
2197                                 case POWER_SUPPLY_STATUS_DISCHARGING:
2198                                 case POWER_SUPPLY_STATUS_NOT_CHARGING:
2199                                         if (!di->flags.charging)
2200                                                 break;
2201                                         di->flags.charging = false;
2202                                         di->flags.fully_charged = false;
2203                                         if (di->bm->capacity_scaling)
2204                                                 ab8500_fg_update_cap_scalers(di);
2205                                         queue_work(di->fg_wq, &di->fg_work);
2206                                         break;
2207                                 case POWER_SUPPLY_STATUS_FULL:
2208                                         if (di->flags.fully_charged)
2209                                                 break;
2210                                         di->flags.fully_charged = true;
2211                                         di->flags.force_full = true;
2212                                         /* Save current capacity as maximum */
2213                                         di->bat_cap.max_mah = di->bat_cap.mah;
2214                                         queue_work(di->fg_wq, &di->fg_work);
2215                                         break;
2216                                 case POWER_SUPPLY_STATUS_CHARGING:
2217                                         if (di->flags.charging &&
2218                                                 !di->flags.fully_charged)
2219                                                 break;
2220                                         di->flags.charging = true;
2221                                         di->flags.fully_charged = false;
2222                                         if (di->bm->capacity_scaling)
2223                                                 ab8500_fg_update_cap_scalers(di);
2224                                         queue_work(di->fg_wq, &di->fg_work);
2225                                         break;
2226                                 }
2227                         default:
2228                                 break;
2229                         }
2230                         break;
2231                 case POWER_SUPPLY_PROP_TECHNOLOGY:
2232                         switch (ext->desc->type) {
2233                         case POWER_SUPPLY_TYPE_BATTERY:
2234                                 if (!di->flags.batt_id_received &&
2235                                     di->bm->batt_id != BATTERY_UNKNOWN) {
2236                                         const struct abx500_battery_type *b;
2237
2238                                         b = &(di->bm->bat_type[di->bm->batt_id]);
2239
2240                                         di->flags.batt_id_received = true;
2241
2242                                         di->bat_cap.max_mah_design =
2243                                                 MILLI_TO_MICRO *
2244                                                 b->charge_full_design;
2245
2246                                         di->bat_cap.max_mah =
2247                                                 di->bat_cap.max_mah_design;
2248
2249                                         di->vbat_nom = b->nominal_voltage;
2250                                 }
2251
2252                                 if (ret.intval)
2253                                         di->flags.batt_unknown = false;
2254                                 else
2255                                         di->flags.batt_unknown = true;
2256                                 break;
2257                         default:
2258                                 break;
2259                         }
2260                         break;
2261                 case POWER_SUPPLY_PROP_TEMP:
2262                         switch (ext->desc->type) {
2263                         case POWER_SUPPLY_TYPE_BATTERY:
2264                                 if (di->flags.batt_id_received)
2265                                         di->bat_temp = ret.intval;
2266                                 break;
2267                         default:
2268                                 break;
2269                         }
2270                         break;
2271                 default:
2272                         break;
2273                 }
2274         }
2275         return 0;
2276 }
2277
2278 /**
2279  * ab8500_fg_init_hw_registers() - Set up FG related registers
2280  * @di:         pointer to the ab8500_fg structure
2281  *
2282  * Set up battery OVV, low battery voltage registers
2283  */
2284 static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
2285 {
2286         int ret;
2287
2288         /* Set VBAT OVV threshold */
2289         ret = abx500_mask_and_set_register_interruptible(di->dev,
2290                 AB8500_CHARGER,
2291                 AB8500_BATT_OVV,
2292                 BATT_OVV_TH_4P75,
2293                 BATT_OVV_TH_4P75);
2294         if (ret) {
2295                 dev_err(di->dev, "failed to set BATT_OVV\n");
2296                 goto out;
2297         }
2298
2299         /* Enable VBAT OVV detection */
2300         ret = abx500_mask_and_set_register_interruptible(di->dev,
2301                 AB8500_CHARGER,
2302                 AB8500_BATT_OVV,
2303                 BATT_OVV_ENA,
2304                 BATT_OVV_ENA);
2305         if (ret) {
2306                 dev_err(di->dev, "failed to enable BATT_OVV\n");
2307                 goto out;
2308         }
2309
2310         /* Low Battery Voltage */
2311         ret = abx500_set_register_interruptible(di->dev,
2312                 AB8500_SYS_CTRL2_BLOCK,
2313                 AB8500_LOW_BAT_REG,
2314                 ab8500_volt_to_regval(
2315                         di->bm->fg_params->lowbat_threshold) << 1 |
2316                 LOW_BAT_ENABLE);
2317         if (ret) {
2318                 dev_err(di->dev, "%s write failed\n", __func__);
2319                 goto out;
2320         }
2321
2322         /* Battery OK threshold */
2323         ret = ab8500_fg_battok_init_hw_register(di);
2324         if (ret) {
2325                 dev_err(di->dev, "BattOk init write failed.\n");
2326                 goto out;
2327         }
2328
2329         if (is_ab8505(di->parent)) {
2330                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2331                         AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
2332
2333                 if (ret) {
2334                         dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
2335                         goto out;
2336                 }
2337
2338                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2339                         AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
2340
2341                 if (ret) {
2342                         dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
2343                         goto out;
2344                 }
2345
2346                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2347                         AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
2348
2349                 if (ret) {
2350                         dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
2351                         goto out;
2352                 }
2353
2354                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2355                         AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
2356
2357                 if (ret) {
2358                         dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
2359                         goto out;
2360                 }
2361
2362                 ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2363                         AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
2364
2365                 if (ret) {
2366                         dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
2367                         goto out;
2368                 }
2369         }
2370 out:
2371         return ret;
2372 }
2373
2374 /**
2375  * ab8500_fg_external_power_changed() - callback for power supply changes
2376  * @psy:       pointer to the structure power_supply
2377  *
2378  * This function is the entry point of the pointer external_power_changed
2379  * of the structure power_supply.
2380  * This function gets executed when there is a change in any external power
2381  * supply that this driver needs to be notified of.
2382  */
2383 static void ab8500_fg_external_power_changed(struct power_supply *psy)
2384 {
2385         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2386
2387         class_for_each_device(power_supply_class, NULL,
2388                 di->fg_psy, ab8500_fg_get_ext_psy_data);
2389 }
2390
2391 /**
2392  * ab8500_fg_reinit_work() - work to reset the FG algorithm
2393  * @work:       pointer to the work_struct structure
2394  *
2395  * Used to reset the current battery capacity to be able to
2396  * retrigger a new voltage base capacity calculation. For
2397  * test and verification purpose.
2398  */
2399 static void ab8500_fg_reinit_work(struct work_struct *work)
2400 {
2401         struct ab8500_fg *di = container_of(work, struct ab8500_fg,
2402                 fg_reinit_work.work);
2403
2404         if (!di->flags.calibrate) {
2405                 dev_dbg(di->dev, "Resetting FG state machine to init.\n");
2406                 ab8500_fg_clear_cap_samples(di);
2407                 ab8500_fg_calc_cap_discharge_voltage(di, true);
2408                 ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
2409                 ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
2410                 queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
2411
2412         } else {
2413                 dev_err(di->dev, "Residual offset calibration ongoing "
2414                         "retrying..\n");
2415                 /* Wait one second until next try*/
2416                 queue_delayed_work(di->fg_wq, &di->fg_reinit_work,
2417                         round_jiffies(1));
2418         }
2419 }
2420
2421 /* Exposure to the sysfs interface */
2422
2423 struct ab8500_fg_sysfs_entry {
2424         struct attribute attr;
2425         ssize_t (*show)(struct ab8500_fg *, char *);
2426         ssize_t (*store)(struct ab8500_fg *, const char *, size_t);
2427 };
2428
2429 static ssize_t charge_full_show(struct ab8500_fg *di, char *buf)
2430 {
2431         return sprintf(buf, "%d\n", di->bat_cap.max_mah);
2432 }
2433
2434 static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
2435                                  size_t count)
2436 {
2437         unsigned long charge_full;
2438         int ret;
2439
2440         ret = kstrtoul(buf, 10, &charge_full);
2441         if (ret)
2442                 return ret;
2443
2444         di->bat_cap.max_mah = (int) charge_full;
2445         return count;
2446 }
2447
2448 static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
2449 {
2450         return sprintf(buf, "%d\n", di->bat_cap.prev_mah);
2451 }
2452
2453 static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
2454                                  size_t count)
2455 {
2456         unsigned long charge_now;
2457         int ret;
2458
2459         ret = kstrtoul(buf, 10, &charge_now);
2460         if (ret)
2461                 return ret;
2462
2463         di->bat_cap.user_mah = (int) charge_now;
2464         di->flags.user_cap = true;
2465         queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
2466         return count;
2467 }
2468
2469 static struct ab8500_fg_sysfs_entry charge_full_attr =
2470         __ATTR(charge_full, 0644, charge_full_show, charge_full_store);
2471
2472 static struct ab8500_fg_sysfs_entry charge_now_attr =
2473         __ATTR(charge_now, 0644, charge_now_show, charge_now_store);
2474
2475 static ssize_t
2476 ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf)
2477 {
2478         struct ab8500_fg_sysfs_entry *entry;
2479         struct ab8500_fg *di;
2480
2481         entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
2482         di = container_of(kobj, struct ab8500_fg, fg_kobject);
2483
2484         if (!entry->show)
2485                 return -EIO;
2486
2487         return entry->show(di, buf);
2488 }
2489 static ssize_t
2490 ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf,
2491                 size_t count)
2492 {
2493         struct ab8500_fg_sysfs_entry *entry;
2494         struct ab8500_fg *di;
2495
2496         entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
2497         di = container_of(kobj, struct ab8500_fg, fg_kobject);
2498
2499         if (!entry->store)
2500                 return -EIO;
2501
2502         return entry->store(di, buf, count);
2503 }
2504
2505 static const struct sysfs_ops ab8500_fg_sysfs_ops = {
2506         .show = ab8500_fg_show,
2507         .store = ab8500_fg_store,
2508 };
2509
2510 static struct attribute *ab8500_fg_attrs[] = {
2511         &charge_full_attr.attr,
2512         &charge_now_attr.attr,
2513         NULL,
2514 };
2515
2516 static struct kobj_type ab8500_fg_ktype = {
2517         .sysfs_ops = &ab8500_fg_sysfs_ops,
2518         .default_attrs = ab8500_fg_attrs,
2519 };
2520
2521 /**
2522  * ab8500_fg_sysfs_exit() - de-init of sysfs entry
2523  * @di:                pointer to the struct ab8500_chargalg
2524  *
2525  * This function removes the entry in sysfs.
2526  */
2527 static void ab8500_fg_sysfs_exit(struct ab8500_fg *di)
2528 {
2529         kobject_del(&di->fg_kobject);
2530 }
2531
2532 /**
2533  * ab8500_fg_sysfs_init() - init of sysfs entry
2534  * @di:                pointer to the struct ab8500_chargalg
2535  *
2536  * This function adds an entry in sysfs.
2537  * Returns error code in case of failure else 0(on success)
2538  */
2539 static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
2540 {
2541         int ret = 0;
2542
2543         ret = kobject_init_and_add(&di->fg_kobject,
2544                 &ab8500_fg_ktype,
2545                 NULL, "battery");
2546         if (ret < 0)
2547                 dev_err(di->dev, "failed to create sysfs entry\n");
2548
2549         return ret;
2550 }
2551
2552 static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
2553                              struct device_attribute *attr,
2554                              char *buf)
2555 {
2556         int ret;
2557         u8 reg_value;
2558         struct power_supply *psy = dev_get_drvdata(dev);
2559         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2560
2561         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2562                 AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
2563
2564         if (ret < 0) {
2565                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
2566                 goto fail;
2567         }
2568
2569         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
2570
2571 fail:
2572         return ret;
2573 }
2574
2575 static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
2576                                   struct device_attribute *attr,
2577                                   const char *buf, size_t count)
2578 {
2579         int ret;
2580         int reg_value;
2581         struct power_supply *psy = dev_get_drvdata(dev);
2582         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2583
2584         if (kstrtoint(buf, 10, &reg_value))
2585                 goto fail;
2586
2587         if (reg_value > 0x7F) {
2588                 dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
2589                 goto fail;
2590         }
2591
2592         ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2593                 AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
2594
2595         if (ret < 0)
2596                 dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
2597
2598 fail:
2599         return count;
2600 }
2601
2602 static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
2603                              struct device_attribute *attr,
2604                              char *buf)
2605 {
2606         int ret;
2607         u8 reg_value;
2608         struct power_supply *psy = dev_get_drvdata(dev);
2609         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2610
2611         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2612                 AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
2613
2614         if (ret < 0) {
2615                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
2616                 goto fail;
2617         }
2618
2619         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
2620
2621 fail:
2622         return ret;
2623
2624 }
2625
2626 static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
2627                                   struct device_attribute *attr,
2628                                   const char *buf, size_t count)
2629 {
2630         int ret;
2631         int reg_value;
2632         struct power_supply *psy = dev_get_drvdata(dev);
2633         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2634
2635         if (kstrtoint(buf, 10, &reg_value))
2636                 goto fail;
2637
2638         if (reg_value > 0x7F) {
2639                 dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
2640                 goto fail;
2641         }
2642
2643         ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2644                 AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
2645
2646         if (ret < 0)
2647                 dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
2648
2649 fail:
2650         return count;
2651 }
2652
2653 static ssize_t ab8505_powercut_restart_read(struct device *dev,
2654                              struct device_attribute *attr,
2655                              char *buf)
2656 {
2657         int ret;
2658         u8 reg_value;
2659         struct power_supply *psy = dev_get_drvdata(dev);
2660         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2661
2662         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2663                 AB8505_RTC_PCUT_RESTART_REG, &reg_value);
2664
2665         if (ret < 0) {
2666                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
2667                 goto fail;
2668         }
2669
2670         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
2671
2672 fail:
2673         return ret;
2674 }
2675
2676 static ssize_t ab8505_powercut_restart_write(struct device *dev,
2677                                              struct device_attribute *attr,
2678                                              const char *buf, size_t count)
2679 {
2680         int ret;
2681         int reg_value;
2682         struct power_supply *psy = dev_get_drvdata(dev);
2683         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2684
2685         if (kstrtoint(buf, 10, &reg_value))
2686                 goto fail;
2687
2688         if (reg_value > 0xF) {
2689                 dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
2690                 goto fail;
2691         }
2692
2693         ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2694                                                 AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
2695
2696         if (ret < 0)
2697                 dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
2698
2699 fail:
2700         return count;
2701
2702 }
2703
2704 static ssize_t ab8505_powercut_timer_read(struct device *dev,
2705                                           struct device_attribute *attr,
2706                                           char *buf)
2707 {
2708         int ret;
2709         u8 reg_value;
2710         struct power_supply *psy = dev_get_drvdata(dev);
2711         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2712
2713         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2714                                                 AB8505_RTC_PCUT_TIME_REG, &reg_value);
2715
2716         if (ret < 0) {
2717                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
2718                 goto fail;
2719         }
2720
2721         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
2722
2723 fail:
2724         return ret;
2725 }
2726
2727 static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
2728                                                     struct device_attribute *attr,
2729                                                     char *buf)
2730 {
2731         int ret;
2732         u8 reg_value;
2733         struct power_supply *psy = dev_get_drvdata(dev);
2734         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2735
2736         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2737                                                 AB8505_RTC_PCUT_RESTART_REG, &reg_value);
2738
2739         if (ret < 0) {
2740                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
2741                 goto fail;
2742         }
2743
2744         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
2745
2746 fail:
2747         return ret;
2748 }
2749
2750 static ssize_t ab8505_powercut_read(struct device *dev,
2751                                     struct device_attribute *attr,
2752                                     char *buf)
2753 {
2754         int ret;
2755         u8 reg_value;
2756         struct power_supply *psy = dev_get_drvdata(dev);
2757         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2758
2759         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2760                                                 AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
2761
2762         if (ret < 0)
2763                 goto fail;
2764
2765         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
2766
2767 fail:
2768         return ret;
2769 }
2770
2771 static ssize_t ab8505_powercut_write(struct device *dev,
2772                                      struct device_attribute *attr,
2773                                      const char *buf, size_t count)
2774 {
2775         int ret;
2776         int reg_value;
2777         struct power_supply *psy = dev_get_drvdata(dev);
2778         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2779
2780         if (kstrtoint(buf, 10, &reg_value))
2781                 goto fail;
2782
2783         if (reg_value > 0x1) {
2784                 dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
2785                 goto fail;
2786         }
2787
2788         ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2789                                                 AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
2790
2791         if (ret < 0)
2792                 dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
2793
2794 fail:
2795         return count;
2796 }
2797
2798 static ssize_t ab8505_powercut_flag_read(struct device *dev,
2799                                          struct device_attribute *attr,
2800                                          char *buf)
2801 {
2802
2803         int ret;
2804         u8 reg_value;
2805         struct power_supply *psy = dev_get_drvdata(dev);
2806         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2807
2808         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2809                                                 AB8505_RTC_PCUT_CTL_STATUS_REG,  &reg_value);
2810
2811         if (ret < 0) {
2812                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
2813                 goto fail;
2814         }
2815
2816         return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
2817
2818 fail:
2819         return ret;
2820 }
2821
2822 static ssize_t ab8505_powercut_debounce_read(struct device *dev,
2823                                              struct device_attribute *attr,
2824                                              char *buf)
2825 {
2826         int ret;
2827         u8 reg_value;
2828         struct power_supply *psy = dev_get_drvdata(dev);
2829         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2830
2831         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2832                                                 AB8505_RTC_PCUT_DEBOUNCE_REG,  &reg_value);
2833
2834         if (ret < 0) {
2835                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
2836                 goto fail;
2837         }
2838
2839         return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
2840
2841 fail:
2842         return ret;
2843 }
2844
2845 static ssize_t ab8505_powercut_debounce_write(struct device *dev,
2846                                               struct device_attribute *attr,
2847                                               const char *buf, size_t count)
2848 {
2849         int ret;
2850         int reg_value;
2851         struct power_supply *psy = dev_get_drvdata(dev);
2852         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2853
2854         if (kstrtoint(buf, 10, &reg_value))
2855                 goto fail;
2856
2857         if (reg_value > 0x7) {
2858                 dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
2859                 goto fail;
2860         }
2861
2862         ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
2863                                                 AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
2864
2865         if (ret < 0)
2866                 dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
2867
2868 fail:
2869         return count;
2870 }
2871
2872 static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
2873                                                   struct device_attribute *attr,
2874                                                   char *buf)
2875 {
2876         int ret;
2877         u8 reg_value;
2878         struct power_supply *psy = dev_get_drvdata(dev);
2879         struct ab8500_fg *di = power_supply_get_drvdata(psy);
2880
2881         ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
2882                                                 AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
2883
2884         if (ret < 0) {
2885                 dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
2886                 goto fail;
2887         }
2888
2889         return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
2890
2891 fail:
2892         return ret;
2893 }
2894
2895 static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
2896         __ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
2897                 ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
2898         __ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
2899                 ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
2900         __ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
2901                 ab8505_powercut_restart_read, ab8505_powercut_restart_write),
2902         __ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
2903         __ATTR(powercut_restart_counter, S_IRUGO,
2904                 ab8505_powercut_restart_counter_read, NULL),
2905         __ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
2906                 ab8505_powercut_read, ab8505_powercut_write),
2907         __ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
2908         __ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
2909                 ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
2910         __ATTR(powercut_enable_status, S_IRUGO,
2911                 ab8505_powercut_enable_status_read, NULL),
2912 };
2913
2914 static int ab8500_fg_sysfs_psy_create_attrs(struct ab8500_fg *di)
2915 {
2916         unsigned int i;
2917
2918         if (is_ab8505(di->parent)) {
2919                 for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
2920                         if (device_create_file(&di->fg_psy->dev,
2921                                                &ab8505_fg_sysfs_psy_attrs[i]))
2922                                 goto sysfs_psy_create_attrs_failed_ab8505;
2923         }
2924         return 0;
2925 sysfs_psy_create_attrs_failed_ab8505:
2926         dev_err(&di->fg_psy->dev, "Failed creating sysfs psy attrs for ab8505.\n");
2927         while (i--)
2928                 device_remove_file(&di->fg_psy->dev,
2929                                    &ab8505_fg_sysfs_psy_attrs[i]);
2930
2931         return -EIO;
2932 }
2933
2934 static void ab8500_fg_sysfs_psy_remove_attrs(struct ab8500_fg *di)
2935 {
2936         unsigned int i;
2937
2938         if (is_ab8505(di->parent)) {
2939                 for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
2940                         (void)device_remove_file(&di->fg_psy->dev,
2941                                                  &ab8505_fg_sysfs_psy_attrs[i]);
2942         }
2943 }
2944
2945 /* Exposure to the sysfs interface <<END>> */
2946
2947 static int __maybe_unused ab8500_fg_resume(struct device *dev)
2948 {
2949         struct ab8500_fg *di = dev_get_drvdata(dev);
2950
2951         /*
2952          * Change state if we're not charging. If we're charging we will wake
2953          * up on the FG IRQ
2954          */
2955         if (!di->flags.charging) {
2956                 ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP);
2957                 queue_work(di->fg_wq, &di->fg_work);
2958         }
2959
2960         return 0;
2961 }
2962
2963 static int __maybe_unused ab8500_fg_suspend(struct device *dev)
2964 {
2965         struct ab8500_fg *di = dev_get_drvdata(dev);
2966
2967         flush_delayed_work(&di->fg_periodic_work);
2968         flush_work(&di->fg_work);
2969         flush_work(&di->fg_acc_cur_work);
2970         flush_delayed_work(&di->fg_reinit_work);
2971         flush_delayed_work(&di->fg_low_bat_work);
2972         flush_delayed_work(&di->fg_check_hw_failure_work);
2973
2974         /*
2975          * If the FG is enabled we will disable it before going to suspend
2976          * only if we're not charging
2977          */
2978         if (di->flags.fg_enabled && !di->flags.charging)
2979                 ab8500_fg_coulomb_counter(di, false);
2980
2981         return 0;
2982 }
2983
2984 /* ab8500 fg driver interrupts and their respective isr */
2985 static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
2986         {"NCONV_ACCU", ab8500_fg_cc_convend_handler},
2987         {"BATT_OVV", ab8500_fg_batt_ovv_handler},
2988         {"LOW_BAT_F", ab8500_fg_lowbatf_handler},
2989         {"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler},
2990         {"CCEOC", ab8500_fg_cc_data_end_handler},
2991 };
2992
2993 static char *supply_interface[] = {
2994         "ab8500_chargalg",
2995         "ab8500_usb",
2996 };
2997
2998 static const struct power_supply_desc ab8500_fg_desc = {
2999         .name                   = "ab8500_fg",
3000         .type                   = POWER_SUPPLY_TYPE_BATTERY,
3001         .properties             = ab8500_fg_props,
3002         .num_properties         = ARRAY_SIZE(ab8500_fg_props),
3003         .get_property           = ab8500_fg_get_property,
3004         .external_power_changed = ab8500_fg_external_power_changed,
3005 };
3006
3007 static int ab8500_fg_bind(struct device *dev, struct device *master,
3008                           void *data)
3009 {
3010         struct ab8500_fg *di = dev_get_drvdata(dev);
3011
3012         /* Create a work queue for running the FG algorithm */
3013         di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
3014         if (di->fg_wq == NULL) {
3015                 dev_err(dev, "failed to create work queue\n");
3016                 return -ENOMEM;
3017         }
3018
3019         /* Start the coulomb counter */
3020         ab8500_fg_coulomb_counter(di, true);
3021         /* Run the FG algorithm */
3022         queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
3023
3024         return 0;
3025 }
3026
3027 static void ab8500_fg_unbind(struct device *dev, struct device *master,
3028                              void *data)
3029 {
3030         struct ab8500_fg *di = dev_get_drvdata(dev);
3031         int ret;
3032
3033         /* Disable coulomb counter */
3034         ret = ab8500_fg_coulomb_counter(di, false);
3035         if (ret)
3036                 dev_err(dev, "failed to disable coulomb counter\n");
3037
3038         destroy_workqueue(di->fg_wq);
3039         flush_scheduled_work();
3040 }
3041
3042 static const struct component_ops ab8500_fg_component_ops = {
3043         .bind = ab8500_fg_bind,
3044         .unbind = ab8500_fg_unbind,
3045 };
3046
3047 static int ab8500_fg_probe(struct platform_device *pdev)
3048 {
3049         struct device *dev = &pdev->dev;
3050         struct power_supply_config psy_cfg = {};
3051         struct ab8500_fg *di;
3052         int i, irq;
3053         int ret = 0;
3054
3055         di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
3056         if (!di)
3057                 return -ENOMEM;
3058
3059         di->bm = &ab8500_bm_data;
3060
3061         mutex_init(&di->cc_lock);
3062
3063         /* get parent data */
3064         di->dev = dev;
3065         di->parent = dev_get_drvdata(pdev->dev.parent);
3066
3067         di->main_bat_v = devm_iio_channel_get(dev, "main_bat_v");
3068         if (IS_ERR(di->main_bat_v)) {
3069                 ret = dev_err_probe(dev, PTR_ERR(di->main_bat_v),
3070                                     "failed to get main battery ADC channel\n");
3071                 return ret;
3072         }
3073
3074         psy_cfg.supplied_to = supply_interface;
3075         psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
3076         psy_cfg.drv_data = di;
3077
3078         di->bat_cap.max_mah_design = MILLI_TO_MICRO *
3079                 di->bm->bat_type[di->bm->batt_id].charge_full_design;
3080
3081         di->bat_cap.max_mah = di->bat_cap.max_mah_design;
3082
3083         di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
3084
3085         di->init_capacity = true;
3086
3087         ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
3088         ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
3089
3090         /* Init work for running the fg algorithm instantly */
3091         INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
3092
3093         /* Init work for getting the battery accumulated current */
3094         INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work);
3095
3096         /* Init work for reinitialising the fg algorithm */
3097         INIT_DEFERRABLE_WORK(&di->fg_reinit_work,
3098                 ab8500_fg_reinit_work);
3099
3100         /* Work delayed Queue to run the state machine */
3101         INIT_DEFERRABLE_WORK(&di->fg_periodic_work,
3102                 ab8500_fg_periodic_work);
3103
3104         /* Work to check low battery condition */
3105         INIT_DEFERRABLE_WORK(&di->fg_low_bat_work,
3106                 ab8500_fg_low_bat_work);
3107
3108         /* Init work for HW failure check */
3109         INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
3110                 ab8500_fg_check_hw_failure_work);
3111
3112         /* Reset battery low voltage flag */
3113         di->flags.low_bat = false;
3114
3115         /* Initialize low battery counter */
3116         di->low_bat_cnt = 10;
3117
3118         /* Initialize OVV, and other registers */
3119         ret = ab8500_fg_init_hw_registers(di);
3120         if (ret) {
3121                 dev_err(dev, "failed to initialize registers\n");
3122                 return ret;
3123         }
3124
3125         /* Consider battery unknown until we're informed otherwise */
3126         di->flags.batt_unknown = true;
3127         di->flags.batt_id_received = false;
3128
3129         /* Register FG power supply class */
3130         di->fg_psy = devm_power_supply_register(dev, &ab8500_fg_desc, &psy_cfg);
3131         if (IS_ERR(di->fg_psy)) {
3132                 dev_err(dev, "failed to register FG psy\n");
3133                 return PTR_ERR(di->fg_psy);
3134         }
3135
3136         di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
3137
3138         /*
3139          * Initialize completion used to notify completion and start
3140          * of inst current
3141          */
3142         init_completion(&di->ab8500_fg_started);
3143         init_completion(&di->ab8500_fg_complete);
3144
3145         /* Register primary interrupt handlers */
3146         for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq); i++) {
3147                 irq = platform_get_irq_byname(pdev, ab8500_fg_irq[i].name);
3148                 if (irq < 0)
3149                         return irq;
3150
3151                 ret = devm_request_threaded_irq(dev, irq, NULL,
3152                                   ab8500_fg_irq[i].isr,
3153                                   IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
3154                                   ab8500_fg_irq[i].name, di);
3155
3156                 if (ret != 0) {
3157                         dev_err(dev, "failed to request %s IRQ %d: %d\n",
3158                                 ab8500_fg_irq[i].name, irq, ret);
3159                         return ret;
3160                 }
3161                 dev_dbg(dev, "Requested %s IRQ %d: %d\n",
3162                         ab8500_fg_irq[i].name, irq, ret);
3163         }
3164
3165         di->irq = platform_get_irq_byname(pdev, "CCEOC");
3166         disable_irq(di->irq);
3167         di->nbr_cceoc_irq_cnt = 0;
3168
3169         platform_set_drvdata(pdev, di);
3170
3171         ret = ab8500_fg_sysfs_init(di);
3172         if (ret) {
3173                 dev_err(dev, "failed to create sysfs entry\n");
3174                 return ret;
3175         }
3176
3177         ret = ab8500_fg_sysfs_psy_create_attrs(di);
3178         if (ret) {
3179                 dev_err(dev, "failed to create FG psy\n");
3180                 ab8500_fg_sysfs_exit(di);
3181                 return ret;
3182         }
3183
3184         /* Calibrate the fg first time */
3185         di->flags.calibrate = true;
3186         di->calib_state = AB8500_FG_CALIB_INIT;
3187
3188         /* Use room temp as default value until we get an update from driver. */
3189         di->bat_temp = 210;
3190
3191         list_add_tail(&di->node, &ab8500_fg_list);
3192
3193         return component_add(dev, &ab8500_fg_component_ops);
3194 }
3195
3196 static int ab8500_fg_remove(struct platform_device *pdev)
3197 {
3198         int ret = 0;
3199         struct ab8500_fg *di = platform_get_drvdata(pdev);
3200
3201         component_del(&pdev->dev, &ab8500_fg_component_ops);
3202         list_del(&di->node);
3203         ab8500_fg_sysfs_exit(di);
3204         ab8500_fg_sysfs_psy_remove_attrs(di);
3205
3206         return ret;
3207 }
3208
3209 static SIMPLE_DEV_PM_OPS(ab8500_fg_pm_ops, ab8500_fg_suspend, ab8500_fg_resume);
3210
3211 static const struct of_device_id ab8500_fg_match[] = {
3212         { .compatible = "stericsson,ab8500-fg", },
3213         { },
3214 };
3215 MODULE_DEVICE_TABLE(of, ab8500_fg_match);
3216
3217 struct platform_driver ab8500_fg_driver = {
3218         .probe = ab8500_fg_probe,
3219         .remove = ab8500_fg_remove,
3220         .driver = {
3221                 .name = "ab8500-fg",
3222                 .of_match_table = ab8500_fg_match,
3223                 .pm = &ab8500_fg_pm_ops,
3224         },
3225 };
3226 MODULE_LICENSE("GPL v2");
3227 MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
3228 MODULE_ALIAS("platform:ab8500-fg");
3229 MODULE_DESCRIPTION("AB8500 Fuel Gauge driver");