clk: uniphier: Fix fixed-rate initialization
[linux-2.6-microblaze.git] / drivers / net / ethernet / 8390 / etherh.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  linux/drivers/acorn/net/etherh.c
4  *
5  *  Copyright (C) 2000-2002 Russell King
6  *
7  * NS8390 I-cubed EtherH and ANT EtherM specific driver
8  * Thanks to I-Cubed for information on their cards.
9  * EtherM conversion (C) 1999 Chris Kemp and Tim Watterton
10  * EtherM integration (C) 2000 Aleph One Ltd (Tak-Shing Chan)
11  * EtherM integration re-engineered by Russell King.
12  *
13  * Changelog:
14  *  08-12-1996  RMK     1.00    Created
15  *              RMK     1.03    Added support for EtherLan500 cards
16  *  23-11-1997  RMK     1.04    Added media autodetection
17  *  16-04-1998  RMK     1.05    Improved media autodetection
18  *  10-02-2000  RMK     1.06    Updated for 2.3.43
19  *  13-05-2000  RMK     1.07    Updated for 2.3.99-pre8
20  *  12-10-1999  CK/TEW          EtherM driver first release
21  *  21-12-2000  TTC             EtherH/EtherM integration
22  *  25-12-2000  RMK     1.08    Clean integration of EtherM into this driver.
23  *  03-01-2002  RMK     1.09    Always enable IRQs if we're in the nic slot.
24  */
25
26 #include <linux/module.h>
27 #include <linux/kernel.h>
28 #include <linux/types.h>
29 #include <linux/fcntl.h>
30 #include <linux/interrupt.h>
31 #include <linux/ioport.h>
32 #include <linux/in.h>
33 #include <linux/string.h>
34 #include <linux/errno.h>
35 #include <linux/netdevice.h>
36 #include <linux/etherdevice.h>
37 #include <linux/ethtool.h>
38 #include <linux/skbuff.h>
39 #include <linux/delay.h>
40 #include <linux/device.h>
41 #include <linux/init.h>
42 #include <linux/bitops.h>
43 #include <linux/jiffies.h>
44
45 #include <asm/ecard.h>
46 #include <asm/io.h>
47 #include <asm/system_info.h>
48
49 #define EI_SHIFT(x)     (ei_local->reg_offset[x])
50
51 #define ei_inb(_p)       readb((void __iomem *)_p)
52 #define ei_outb(_v,_p)   writeb(_v,(void __iomem *)_p)
53 #define ei_inb_p(_p)     readb((void __iomem *)_p)
54 #define ei_outb_p(_v,_p) writeb(_v,(void __iomem *)_p)
55
56 #define DRV_NAME        "etherh"
57 #define DRV_VERSION     "1.11"
58
59 static char version[] =
60         "EtherH/EtherM Driver (c) 2002-2004 Russell King " DRV_VERSION "\n";
61
62 #include "lib8390.c"
63
64 struct etherh_priv {
65         void __iomem    *ioc_fast;
66         void __iomem    *memc;
67         void __iomem    *dma_base;
68         unsigned int    id;
69         void __iomem    *ctrl_port;
70         unsigned char   ctrl;
71         u32             supported;
72 };
73
74 struct etherh_data {
75         unsigned long   ns8390_offset;
76         unsigned long   dataport_offset;
77         unsigned long   ctrlport_offset;
78         int             ctrl_ioc;
79         const char      name[16];
80         u32             supported;
81         unsigned char   tx_start_page;
82         unsigned char   stop_page;
83 };
84
85 MODULE_AUTHOR("Russell King");
86 MODULE_DESCRIPTION("EtherH/EtherM driver");
87 MODULE_LICENSE("GPL");
88
89 #define ETHERH500_DATAPORT      0x800   /* MEMC */
90 #define ETHERH500_NS8390        0x000   /* MEMC */
91 #define ETHERH500_CTRLPORT      0x800   /* IOC  */
92
93 #define ETHERH600_DATAPORT      0x040   /* MEMC */
94 #define ETHERH600_NS8390        0x800   /* MEMC */
95 #define ETHERH600_CTRLPORT      0x200   /* MEMC */
96
97 #define ETHERH_CP_IE            1
98 #define ETHERH_CP_IF            2
99 #define ETHERH_CP_HEARTBEAT     2
100
101 #define ETHERH_TX_START_PAGE    1
102 #define ETHERH_STOP_PAGE        127
103
104 /*
105  * These came from CK/TEW
106  */
107 #define ETHERM_DATAPORT         0x200   /* MEMC */
108 #define ETHERM_NS8390           0x800   /* MEMC */
109 #define ETHERM_CTRLPORT         0x23c   /* MEMC */
110
111 #define ETHERM_TX_START_PAGE    64
112 #define ETHERM_STOP_PAGE        127
113
114 /* ------------------------------------------------------------------------ */
115
116 #define etherh_priv(dev) \
117  ((struct etherh_priv *)(((char *)netdev_priv(dev)) + sizeof(struct ei_device)))
118
119 static inline void etherh_set_ctrl(struct etherh_priv *eh, unsigned char mask)
120 {
121         unsigned char ctrl = eh->ctrl | mask;
122         eh->ctrl = ctrl;
123         writeb(ctrl, eh->ctrl_port);
124 }
125
126 static inline void etherh_clr_ctrl(struct etherh_priv *eh, unsigned char mask)
127 {
128         unsigned char ctrl = eh->ctrl & ~mask;
129         eh->ctrl = ctrl;
130         writeb(ctrl, eh->ctrl_port);
131 }
132
133 static inline unsigned int etherh_get_stat(struct etherh_priv *eh)
134 {
135         return readb(eh->ctrl_port);
136 }
137
138
139
140
141 static void etherh_irq_enable(ecard_t *ec, int irqnr)
142 {
143         struct etherh_priv *eh = ec->irq_data;
144
145         etherh_set_ctrl(eh, ETHERH_CP_IE);
146 }
147
148 static void etherh_irq_disable(ecard_t *ec, int irqnr)
149 {
150         struct etherh_priv *eh = ec->irq_data;
151
152         etherh_clr_ctrl(eh, ETHERH_CP_IE);
153 }
154
155 static expansioncard_ops_t etherh_ops = {
156         .irqenable      = etherh_irq_enable,
157         .irqdisable     = etherh_irq_disable,
158 };
159
160
161
162
163 static void
164 etherh_setif(struct net_device *dev)
165 {
166         struct ei_device *ei_local = netdev_priv(dev);
167         unsigned long flags;
168         void __iomem *addr;
169
170         local_irq_save(flags);
171
172         /* set the interface type */
173         switch (etherh_priv(dev)->id) {
174         case PROD_I3_ETHERLAN600:
175         case PROD_I3_ETHERLAN600A:
176                 addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
177
178                 switch (dev->if_port) {
179                 case IF_PORT_10BASE2:
180                         writeb((readb(addr) & 0xf8) | 1, addr);
181                         break;
182                 case IF_PORT_10BASET:
183                         writeb((readb(addr) & 0xf8), addr);
184                         break;
185                 }
186                 break;
187
188         case PROD_I3_ETHERLAN500:
189                 switch (dev->if_port) {
190                 case IF_PORT_10BASE2:
191                         etherh_clr_ctrl(etherh_priv(dev), ETHERH_CP_IF);
192                         break;
193
194                 case IF_PORT_10BASET:
195                         etherh_set_ctrl(etherh_priv(dev), ETHERH_CP_IF);
196                         break;
197                 }
198                 break;
199
200         default:
201                 break;
202         }
203
204         local_irq_restore(flags);
205 }
206
207 static int
208 etherh_getifstat(struct net_device *dev)
209 {
210         struct ei_device *ei_local = netdev_priv(dev);
211         void __iomem *addr;
212         int stat = 0;
213
214         switch (etherh_priv(dev)->id) {
215         case PROD_I3_ETHERLAN600:
216         case PROD_I3_ETHERLAN600A:
217                 addr = (void __iomem *)dev->base_addr + EN0_RCNTHI;
218                 switch (dev->if_port) {
219                 case IF_PORT_10BASE2:
220                         stat = 1;
221                         break;
222                 case IF_PORT_10BASET:
223                         stat = readb(addr) & 4;
224                         break;
225                 }
226                 break;
227
228         case PROD_I3_ETHERLAN500:
229                 switch (dev->if_port) {
230                 case IF_PORT_10BASE2:
231                         stat = 1;
232                         break;
233                 case IF_PORT_10BASET:
234                         stat = etherh_get_stat(etherh_priv(dev)) & ETHERH_CP_HEARTBEAT;
235                         break;
236                 }
237                 break;
238
239         default:
240                 stat = 0;
241                 break;
242         }
243
244         return stat != 0;
245 }
246
247 /*
248  * Configure the interface.  Note that we ignore the other
249  * parts of ifmap, since its mostly meaningless for this driver.
250  */
251 static int etherh_set_config(struct net_device *dev, struct ifmap *map)
252 {
253         switch (map->port) {
254         case IF_PORT_10BASE2:
255         case IF_PORT_10BASET:
256                 /*
257                  * If the user explicitly sets the interface
258                  * media type, turn off automedia detection.
259                  */
260                 dev->flags &= ~IFF_AUTOMEDIA;
261                 dev->if_port = map->port;
262                 break;
263
264         default:
265                 return -EINVAL;
266         }
267
268         etherh_setif(dev);
269
270         return 0;
271 }
272
273 /*
274  * Reset the 8390 (hard reset).  Note that we can't actually do this.
275  */
276 static void
277 etherh_reset(struct net_device *dev)
278 {
279         struct ei_device *ei_local = netdev_priv(dev);
280         void __iomem *addr = (void __iomem *)dev->base_addr;
281
282         writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr);
283
284         /*
285          * See if we need to change the interface type.
286          * Note that we use 'interface_num' as a flag
287          * to indicate that we need to change the media.
288          */
289         if (dev->flags & IFF_AUTOMEDIA && ei_local->interface_num) {
290                 ei_local->interface_num = 0;
291
292                 if (dev->if_port == IF_PORT_10BASET)
293                         dev->if_port = IF_PORT_10BASE2;
294                 else
295                         dev->if_port = IF_PORT_10BASET;
296
297                 etherh_setif(dev);
298         }
299 }
300
301 /*
302  * Write a block of data out to the 8390
303  */
304 static void
305 etherh_block_output (struct net_device *dev, int count, const unsigned char *buf, int start_page)
306 {
307         struct ei_device *ei_local = netdev_priv(dev);
308         unsigned long dma_start;
309         void __iomem *dma_base, *addr;
310
311         if (ei_local->dmaing) {
312                 netdev_err(dev, "DMAing conflict in etherh_block_input: "
313                            " DMAstat %d irqlock %d\n",
314                            ei_local->dmaing, ei_local->irqlock);
315                 return;
316         }
317
318         /*
319          * Make sure we have a round number of bytes if we're in word mode.
320          */
321         if (count & 1 && ei_local->word16)
322                 count++;
323
324         ei_local->dmaing = 1;
325
326         addr = (void __iomem *)dev->base_addr;
327         dma_base = etherh_priv(dev)->dma_base;
328
329         count = (count + 1) & ~1;
330         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
331
332         writeb (0x42, addr + EN0_RCNTLO);
333         writeb (0x00, addr + EN0_RCNTHI);
334         writeb (0x42, addr + EN0_RSARLO);
335         writeb (0x00, addr + EN0_RSARHI);
336         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
337
338         udelay (1);
339
340         writeb (ENISR_RDC, addr + EN0_ISR);
341         writeb (count, addr + EN0_RCNTLO);
342         writeb (count >> 8, addr + EN0_RCNTHI);
343         writeb (0, addr + EN0_RSARLO);
344         writeb (start_page, addr + EN0_RSARHI);
345         writeb (E8390_RWRITE | E8390_START, addr + E8390_CMD);
346
347         if (ei_local->word16)
348                 writesw (dma_base, buf, count >> 1);
349         else
350                 writesb (dma_base, buf, count);
351
352         dma_start = jiffies;
353
354         while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
355                 if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
356                         netdev_warn(dev, "timeout waiting for TX RDC\n");
357                         etherh_reset (dev);
358                         __NS8390_init (dev, 1);
359                         break;
360                 }
361
362         writeb (ENISR_RDC, addr + EN0_ISR);
363         ei_local->dmaing = 0;
364 }
365
366 /*
367  * Read a block of data from the 8390
368  */
369 static void
370 etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
371 {
372         struct ei_device *ei_local = netdev_priv(dev);
373         unsigned char *buf;
374         void __iomem *dma_base, *addr;
375
376         if (ei_local->dmaing) {
377                 netdev_err(dev, "DMAing conflict in etherh_block_input: "
378                            " DMAstat %d irqlock %d\n",
379                            ei_local->dmaing, ei_local->irqlock);
380                 return;
381         }
382
383         ei_local->dmaing = 1;
384
385         addr = (void __iomem *)dev->base_addr;
386         dma_base = etherh_priv(dev)->dma_base;
387
388         buf = skb->data;
389         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
390         writeb (count, addr + EN0_RCNTLO);
391         writeb (count >> 8, addr + EN0_RCNTHI);
392         writeb (ring_offset, addr + EN0_RSARLO);
393         writeb (ring_offset >> 8, addr + EN0_RSARHI);
394         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
395
396         if (ei_local->word16) {
397                 readsw (dma_base, buf, count >> 1);
398                 if (count & 1)
399                         buf[count - 1] = readb (dma_base);
400         } else
401                 readsb (dma_base, buf, count);
402
403         writeb (ENISR_RDC, addr + EN0_ISR);
404         ei_local->dmaing = 0;
405 }
406
407 /*
408  * Read a header from the 8390
409  */
410 static void
411 etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
412 {
413         struct ei_device *ei_local = netdev_priv(dev);
414         void __iomem *dma_base, *addr;
415
416         if (ei_local->dmaing) {
417                 netdev_err(dev, "DMAing conflict in etherh_get_header: "
418                            " DMAstat %d irqlock %d\n",
419                            ei_local->dmaing, ei_local->irqlock);
420                 return;
421         }
422
423         ei_local->dmaing = 1;
424
425         addr = (void __iomem *)dev->base_addr;
426         dma_base = etherh_priv(dev)->dma_base;
427
428         writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD);
429         writeb (sizeof (*hdr), addr + EN0_RCNTLO);
430         writeb (0, addr + EN0_RCNTHI);
431         writeb (0, addr + EN0_RSARLO);
432         writeb (ring_page, addr + EN0_RSARHI);
433         writeb (E8390_RREAD | E8390_START, addr + E8390_CMD);
434
435         if (ei_local->word16)
436                 readsw (dma_base, hdr, sizeof (*hdr) >> 1);
437         else
438                 readsb (dma_base, hdr, sizeof (*hdr));
439
440         writeb (ENISR_RDC, addr + EN0_ISR);
441         ei_local->dmaing = 0;
442 }
443
444 /*
445  * Open/initialize the board.  This is called (in the current kernel)
446  * sometime after booting when the 'ifconfig' program is run.
447  *
448  * This routine should set everything up anew at each open, even
449  * registers that "should" only need to be set once at boot, so that
450  * there is non-reboot way to recover if something goes wrong.
451  */
452 static int
453 etherh_open(struct net_device *dev)
454 {
455         struct ei_device *ei_local = netdev_priv(dev);
456
457         if (request_irq(dev->irq, __ei_interrupt, 0, dev->name, dev))
458                 return -EAGAIN;
459
460         /*
461          * Make sure that we aren't going to change the
462          * media type on the next reset - we are about to
463          * do automedia manually now.
464          */
465         ei_local->interface_num = 0;
466
467         /*
468          * If we are doing automedia detection, do it now.
469          * This is more reliable than the 8390's detection.
470          */
471         if (dev->flags & IFF_AUTOMEDIA) {
472                 dev->if_port = IF_PORT_10BASET;
473                 etherh_setif(dev);
474                 mdelay(1);
475                 if (!etherh_getifstat(dev)) {
476                         dev->if_port = IF_PORT_10BASE2;
477                         etherh_setif(dev);
478                 }
479         } else
480                 etherh_setif(dev);
481
482         etherh_reset(dev);
483         __ei_open(dev);
484
485         return 0;
486 }
487
488 /*
489  * The inverse routine to etherh_open().
490  */
491 static int
492 etherh_close(struct net_device *dev)
493 {
494         __ei_close (dev);
495         free_irq (dev->irq, dev);
496         return 0;
497 }
498
499 /*
500  * Read the ethernet address string from the on board rom.
501  * This is an ascii string...
502  */
503 static int etherh_addr(char *addr, struct expansion_card *ec)
504 {
505         struct in_chunk_dir cd;
506         char *s;
507         
508         if (!ecard_readchunk(&cd, ec, 0xf5, 0)) {
509                 printk(KERN_ERR "%s: unable to read module description string\n",
510                        dev_name(&ec->dev));
511                 goto no_addr;
512         }
513
514         s = strchr(cd.d.string, '(');
515         if (s) {
516                 int i;
517
518                 for (i = 0; i < 6; i++) {
519                         addr[i] = simple_strtoul(s + 1, &s, 0x10);
520                         if (*s != (i == 5? ')' : ':'))
521                                 break;
522                 }
523
524                 if (i == 6)
525                         return 0;
526         }
527
528         printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
529                dev_name(&ec->dev), cd.d.string);
530
531  no_addr:
532         return -ENODEV;
533 }
534
535 /*
536  * Create an ethernet address from the system serial number.
537  */
538 static int __init etherm_addr(char *addr)
539 {
540         unsigned int serial;
541
542         if (system_serial_low == 0 && system_serial_high == 0)
543                 return -ENODEV;
544
545         serial = system_serial_low | system_serial_high;
546
547         addr[0] = 0;
548         addr[1] = 0;
549         addr[2] = 0xa4;
550         addr[3] = 0x10 + (serial >> 24);
551         addr[4] = serial >> 16;
552         addr[5] = serial >> 8;
553         return 0;
554 }
555
556 static void etherh_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
557 {
558         strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
559         strlcpy(info->version, DRV_VERSION, sizeof(info->version));
560         strlcpy(info->bus_info, dev_name(dev->dev.parent),
561                 sizeof(info->bus_info));
562 }
563
564 static int etherh_get_link_ksettings(struct net_device *dev,
565                                      struct ethtool_link_ksettings *cmd)
566 {
567         ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
568                                                 etherh_priv(dev)->supported);
569         cmd->base.speed = SPEED_10;
570         cmd->base.duplex = DUPLEX_HALF;
571         cmd->base.port = dev->if_port == IF_PORT_10BASET ? PORT_TP : PORT_BNC;
572         cmd->base.autoneg = (dev->flags & IFF_AUTOMEDIA ? AUTONEG_ENABLE :
573                                                           AUTONEG_DISABLE);
574         return 0;
575 }
576
577 static int etherh_set_link_ksettings(struct net_device *dev,
578                                      const struct ethtool_link_ksettings *cmd)
579 {
580         switch (cmd->base.autoneg) {
581         case AUTONEG_ENABLE:
582                 dev->flags |= IFF_AUTOMEDIA;
583                 break;
584
585         case AUTONEG_DISABLE:
586                 switch (cmd->base.port) {
587                 case PORT_TP:
588                         dev->if_port = IF_PORT_10BASET;
589                         break;
590
591                 case PORT_BNC:
592                         dev->if_port = IF_PORT_10BASE2;
593                         break;
594
595                 default:
596                         return -EINVAL;
597                 }
598                 dev->flags &= ~IFF_AUTOMEDIA;
599                 break;
600
601         default:
602                 return -EINVAL;
603         }
604
605         etherh_setif(dev);
606
607         return 0;
608 }
609
610 static u32 etherh_get_msglevel(struct net_device *dev)
611 {
612         struct ei_device *ei_local = netdev_priv(dev);
613
614         return ei_local->msg_enable;
615 }
616
617 static void etherh_set_msglevel(struct net_device *dev, u32 v)
618 {
619         struct ei_device *ei_local = netdev_priv(dev);
620
621         ei_local->msg_enable = v;
622 }
623
624 static const struct ethtool_ops etherh_ethtool_ops = {
625         .get_drvinfo            = etherh_get_drvinfo,
626         .get_ts_info            = ethtool_op_get_ts_info,
627         .get_msglevel           = etherh_get_msglevel,
628         .set_msglevel           = etherh_set_msglevel,
629         .get_link_ksettings     = etherh_get_link_ksettings,
630         .set_link_ksettings     = etherh_set_link_ksettings,
631 };
632
633 static const struct net_device_ops etherh_netdev_ops = {
634         .ndo_open               = etherh_open,
635         .ndo_stop               = etherh_close,
636         .ndo_set_config         = etherh_set_config,
637         .ndo_start_xmit         = __ei_start_xmit,
638         .ndo_tx_timeout         = __ei_tx_timeout,
639         .ndo_get_stats          = __ei_get_stats,
640         .ndo_set_rx_mode        = __ei_set_multicast_list,
641         .ndo_validate_addr      = eth_validate_addr,
642         .ndo_set_mac_address    = eth_mac_addr,
643 #ifdef CONFIG_NET_POLL_CONTROLLER
644         .ndo_poll_controller    = __ei_poll,
645 #endif
646 };
647
648 static u32 etherh_regoffsets[16];
649 static u32 etherm_regoffsets[16];
650
651 static int
652 etherh_probe(struct expansion_card *ec, const struct ecard_id *id)
653 {
654         const struct etherh_data *data = id->data;
655         struct ei_device *ei_local;
656         struct net_device *dev;
657         struct etherh_priv *eh;
658         int ret;
659
660         ret = ecard_request_resources(ec);
661         if (ret)
662                 goto out;
663
664         dev = ____alloc_ei_netdev(sizeof(struct etherh_priv));
665         if (!dev) {
666                 ret = -ENOMEM;
667                 goto release;
668         }
669
670         SET_NETDEV_DEV(dev, &ec->dev);
671
672         dev->netdev_ops         = &etherh_netdev_ops;
673         dev->irq                = ec->irq;
674         dev->ethtool_ops        = &etherh_ethtool_ops;
675
676         if (data->supported & SUPPORTED_Autoneg)
677                 dev->flags |= IFF_AUTOMEDIA;
678         if (data->supported & SUPPORTED_TP) {
679                 dev->flags |= IFF_PORTSEL;
680                 dev->if_port = IF_PORT_10BASET;
681         } else if (data->supported & SUPPORTED_BNC) {
682                 dev->flags |= IFF_PORTSEL;
683                 dev->if_port = IF_PORT_10BASE2;
684         } else
685                 dev->if_port = IF_PORT_UNKNOWN;
686
687         eh = etherh_priv(dev);
688         eh->supported           = data->supported;
689         eh->ctrl                = 0;
690         eh->id                  = ec->cid.product;
691         eh->memc                = ecardm_iomap(ec, ECARD_RES_MEMC, 0, PAGE_SIZE);
692         if (!eh->memc) {
693                 ret = -ENOMEM;
694                 goto free;
695         }
696
697         eh->ctrl_port = eh->memc;
698         if (data->ctrl_ioc) {
699                 eh->ioc_fast = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, PAGE_SIZE);
700                 if (!eh->ioc_fast) {
701                         ret = -ENOMEM;
702                         goto free;
703                 }
704                 eh->ctrl_port = eh->ioc_fast;
705         }
706
707         dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset;
708         eh->dma_base = eh->memc + data->dataport_offset;
709         eh->ctrl_port += data->ctrlport_offset;
710
711         /*
712          * IRQ and control port handling - only for non-NIC slot cards.
713          */
714         if (ec->slot_no != 8) {
715                 ecard_setirq(ec, &etherh_ops, eh);
716         } else {
717                 /*
718                  * If we're in the NIC slot, make sure the IRQ is enabled
719                  */
720                 etherh_set_ctrl(eh, ETHERH_CP_IE);
721         }
722
723         ei_local = netdev_priv(dev);
724         spin_lock_init(&ei_local->page_lock);
725
726         if (ec->cid.product == PROD_ANT_ETHERM) {
727                 etherm_addr(dev->dev_addr);
728                 ei_local->reg_offset = etherm_regoffsets;
729         } else {
730                 etherh_addr(dev->dev_addr, ec);
731                 ei_local->reg_offset = etherh_regoffsets;
732         }
733
734         ei_local->name          = dev->name;
735         ei_local->word16        = 1;
736         ei_local->tx_start_page = data->tx_start_page;
737         ei_local->rx_start_page = ei_local->tx_start_page + TX_PAGES;
738         ei_local->stop_page     = data->stop_page;
739         ei_local->reset_8390    = etherh_reset;
740         ei_local->block_input   = etherh_block_input;
741         ei_local->block_output  = etherh_block_output;
742         ei_local->get_8390_hdr  = etherh_get_header;
743         ei_local->interface_num = 0;
744
745         etherh_reset(dev);
746         __NS8390_init(dev, 0);
747
748         ret = register_netdev(dev);
749         if (ret)
750                 goto free;
751
752         netdev_info(dev, "%s in slot %d, %pM\n",
753                     data->name, ec->slot_no, dev->dev_addr);
754
755         ecard_set_drvdata(ec, dev);
756
757         return 0;
758
759  free:
760         free_netdev(dev);
761  release:
762         ecard_release_resources(ec);
763  out:
764         return ret;
765 }
766
767 static void etherh_remove(struct expansion_card *ec)
768 {
769         struct net_device *dev = ecard_get_drvdata(ec);
770
771         ecard_set_drvdata(ec, NULL);
772
773         unregister_netdev(dev);
774
775         free_netdev(dev);
776
777         ecard_release_resources(ec);
778 }
779
780 static struct etherh_data etherm_data = {
781         .ns8390_offset          = ETHERM_NS8390,
782         .dataport_offset        = ETHERM_NS8390 + ETHERM_DATAPORT,
783         .ctrlport_offset        = ETHERM_NS8390 + ETHERM_CTRLPORT,
784         .name                   = "ANT EtherM",
785         .supported              = SUPPORTED_10baseT_Half,
786         .tx_start_page          = ETHERM_TX_START_PAGE,
787         .stop_page              = ETHERM_STOP_PAGE,
788 };
789
790 static struct etherh_data etherlan500_data = {
791         .ns8390_offset          = ETHERH500_NS8390,
792         .dataport_offset        = ETHERH500_NS8390 + ETHERH500_DATAPORT,
793         .ctrlport_offset        = ETHERH500_CTRLPORT,
794         .ctrl_ioc               = 1,
795         .name                   = "i3 EtherH 500",
796         .supported              = SUPPORTED_10baseT_Half,
797         .tx_start_page          = ETHERH_TX_START_PAGE,
798         .stop_page              = ETHERH_STOP_PAGE,
799 };
800
801 static struct etherh_data etherlan600_data = {
802         .ns8390_offset          = ETHERH600_NS8390,
803         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
804         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
805         .name                   = "i3 EtherH 600",
806         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
807         .tx_start_page          = ETHERH_TX_START_PAGE,
808         .stop_page              = ETHERH_STOP_PAGE,
809 };
810
811 static struct etherh_data etherlan600a_data = {
812         .ns8390_offset          = ETHERH600_NS8390,
813         .dataport_offset        = ETHERH600_NS8390 + ETHERH600_DATAPORT,
814         .ctrlport_offset        = ETHERH600_NS8390 + ETHERH600_CTRLPORT,
815         .name                   = "i3 EtherH 600A",
816         .supported              = SUPPORTED_10baseT_Half | SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_Autoneg,
817         .tx_start_page          = ETHERH_TX_START_PAGE,
818         .stop_page              = ETHERH_STOP_PAGE,
819 };
820
821 static const struct ecard_id etherh_ids[] = {
822         { MANU_ANT, PROD_ANT_ETHERM,      &etherm_data       },
823         { MANU_I3,  PROD_I3_ETHERLAN500,  &etherlan500_data  },
824         { MANU_I3,  PROD_I3_ETHERLAN600,  &etherlan600_data  },
825         { MANU_I3,  PROD_I3_ETHERLAN600A, &etherlan600a_data },
826         { 0xffff,   0xffff }
827 };
828
829 static struct ecard_driver etherh_driver = {
830         .probe          = etherh_probe,
831         .remove         = etherh_remove,
832         .id_table       = etherh_ids,
833         .drv = {
834                 .name   = DRV_NAME,
835         },
836 };
837
838 static int __init etherh_init(void)
839 {
840         int i;
841
842         for (i = 0; i < 16; i++) {
843                 etherh_regoffsets[i] = i << 2;
844                 etherm_regoffsets[i] = i << 5;
845         }
846
847         return ecard_register_driver(&etherh_driver);
848 }
849
850 static void __exit etherh_exit(void)
851 {
852         ecard_remove_driver(&etherh_driver);
853 }
854
855 module_init(etherh_init);
856 module_exit(etherh_exit);