drivers/net/dsa/sja1105/sja1105_spi.c

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /* Copyright (c) 2016-2018, NXP Semiconductors
   3  * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH
   4  * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com>
   5  */
   6 #include <linux/spi/spi.h>
   7 #include <linux/packing.h>
   8 #include "sja1105.h"
   9
  10 struct sja1105_chunk {
  11         u8      *buf;
  12         size_t  len;
  13         u64     reg_addr;
  14 };
  15
  16 static void
  17 sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg)
  18 {
  19         const int size = SJA1105_SIZE_SPI_MSG_HEADER;
  20
  21         memset(buf, 0, size);
  22
  23         sja1105_pack(buf, &msg->access,     31, 31, size);
  24         sja1105_pack(buf, &msg->read_count, 30, 25, size);
  25         sja1105_pack(buf, &msg->address,    24,  4, size);
  26 }
  27
  28 /* If @rw is:
  29  * - SPI_WRITE: creates and sends an SPI write message at absolute
  30  *              address reg_addr, taking @len bytes from *buf
  31  * - SPI_READ:  creates and sends an SPI read message from absolute
  32  *              address reg_addr, writing @len bytes into *buf
  33  */
  34 static int sja1105_xfer(const struct sja1105_private *priv,
  35                         sja1105_spi_rw_mode_t rw, u64 reg_addr, u8 *buf,
  36                         size_t len, struct ptp_system_timestamp *ptp_sts)
  37 {
  38         u8 hdr_buf[SJA1105_SIZE_SPI_MSG_HEADER] = {0};
  39         struct spi_device *spi = priv->spidev;
  40         struct spi_transfer xfers[2] = {0};
  41         struct spi_transfer *chunk_xfer;
  42         struct spi_transfer *hdr_xfer;
  43         struct sja1105_chunk chunk;
  44         int num_chunks;
  45         int rc, i = 0;
  46
  47         num_chunks = DIV_ROUND_UP(len, priv->max_xfer_len);
  48
  49         chunk.reg_addr = reg_addr;
  50         chunk.buf = buf;
  51         chunk.len = min_t(size_t, len, priv->max_xfer_len);
  52
  53         hdr_xfer = &xfers[0];
  54         chunk_xfer = &xfers[1];
  55
  56         for (i = 0; i < num_chunks; i++) {
  57                 struct spi_transfer *ptp_sts_xfer;
  58                 struct sja1105_spi_message msg;
  59
  60                 /* Populate the transfer's header buffer */
  61                 msg.address = chunk.reg_addr;
  62                 msg.access = rw;
  63                 if (rw == SPI_READ)
  64                         msg.read_count = chunk.len / 4;
  65                 else
  66                         /* Ignored */
  67                         msg.read_count = 0;
  68                 sja1105_spi_message_pack(hdr_buf, &msg);
  69                 hdr_xfer->tx_buf = hdr_buf;
  70                 hdr_xfer->len = SJA1105_SIZE_SPI_MSG_HEADER;
  71
  72                 /* Populate the transfer's data buffer */
  73                 if (rw == SPI_READ)
  74                         chunk_xfer->rx_buf = chunk.buf;
  75                 else
  76                         chunk_xfer->tx_buf = chunk.buf;
  77                 chunk_xfer->len = chunk.len;
  78
  79                 /* Request timestamping for the transfer. Instead of letting
  80                  * callers specify which byte they want to timestamp, we can
  81                  * make certain assumptions:
  82                  * - A read operation will request a software timestamp when
  83                  *   what's being read is the PTP time. That is snapshotted by
  84                  *   the switch hardware at the end of the command portion
  85                  *   (hdr_xfer).
  86                  * - A write operation will request a software timestamp on
  87                  *   actions that modify the PTP time. Taking clock stepping as
  88                  *   an example, the switch writes the PTP time at the end of
  89                  *   the data portion (chunk_xfer).
  90                  */
  91                 if (rw == SPI_READ)
  92                         ptp_sts_xfer = hdr_xfer;
  93                 else
  94                         ptp_sts_xfer = chunk_xfer;
  95                 ptp_sts_xfer->ptp_sts_word_pre = ptp_sts_xfer->len - 1;
  96                 ptp_sts_xfer->ptp_sts_word_post = ptp_sts_xfer->len - 1;
  97                 ptp_sts_xfer->ptp_sts = ptp_sts;
  98
  99                 /* Calculate next chunk */
 100                 chunk.buf += chunk.len;
 101                 chunk.reg_addr += chunk.len / 4;
 102                 chunk.len = min_t(size_t, (ptrdiff_t)(buf + len - chunk.buf),
 103                                   priv->max_xfer_len);
 104
 105                 rc = spi_sync_transfer(spi, xfers, 2);
 106                 if (rc < 0) {
 107                         dev_err(&spi->dev, "SPI transfer failed: %d\n", rc);
 108                         return rc;
 109                 }
 110         }
 111
 112         return 0;
 113 }
 114
 115 int sja1105_xfer_buf(const struct sja1105_private *priv,
 116                      sja1105_spi_rw_mode_t rw, u64 reg_addr,
 117                      u8 *buf, size_t len)
 118 {
 119         return sja1105_xfer(priv, rw, reg_addr, buf, len, NULL);
 120 }
 121
 122 /* If @rw is:
 123  * - SPI_WRITE: creates and sends an SPI write message at absolute
 124  *              address reg_addr
 125  * - SPI_READ:  creates and sends an SPI read message from absolute
 126  *              address reg_addr
 127  *
 128  * The u64 *value is unpacked, meaning that it's stored in the native
 129  * CPU endianness and directly usable by software running on the core.
 130  */
 131 int sja1105_xfer_u64(const struct sja1105_private *priv,
 132                      sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value,
 133                      struct ptp_system_timestamp *ptp_sts)
 134 {
 135         u8 packed_buf[8];
 136         int rc;
 137
 138         if (rw == SPI_WRITE)
 139                 sja1105_pack(packed_buf, value, 63, 0, 8);
 140
 141         rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 8, ptp_sts);
 142
 143         if (rw == SPI_READ)
 144                 sja1105_unpack(packed_buf, value, 63, 0, 8);
 145
 146         return rc;
 147 }
 148
 149 /* Same as above, but transfers only a 4 byte word */
 150 int sja1105_xfer_u32(const struct sja1105_private *priv,
 151                      sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value,
 152                      struct ptp_system_timestamp *ptp_sts)
 153 {
 154         u8 packed_buf[4];
 155         u64 tmp;
 156         int rc;
 157
 158         if (rw == SPI_WRITE) {
 159                 /* The packing API only supports u64 as CPU word size,
 160                  * so we need to convert.
 161                  */
 162                 tmp = *value;
 163                 sja1105_pack(packed_buf, &tmp, 31, 0, 4);
 164         }
 165
 166         rc = sja1105_xfer(priv, rw, reg_addr, packed_buf, 4, ptp_sts);
 167
 168         if (rw == SPI_READ) {
 169                 sja1105_unpack(packed_buf, &tmp, 31, 0, 4);
 170                 *value = tmp;
 171         }
 172
 173         return rc;
 174 }
 175
 176 static int sja1105et_reset_cmd(struct dsa_switch *ds)
 177 {
 178         struct sja1105_private *priv = ds->priv;
 179         const struct sja1105_regs *regs = priv->info->regs;
 180         u32 cold_reset = BIT(3);
 181
 182         /* Cold reset */
 183         return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
 184 }
 185
 186 static int sja1105pqrs_reset_cmd(struct dsa_switch *ds)
 187 {
 188         struct sja1105_private *priv = ds->priv;
 189         const struct sja1105_regs *regs = priv->info->regs;
 190         u32 cold_reset = BIT(2);
 191
 192         /* Cold reset */
 193         return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &cold_reset, NULL);
 194 }
 195
 196 static int sja1110_reset_cmd(struct dsa_switch *ds)
 197 {
 198         struct sja1105_private *priv = ds->priv;
 199         const struct sja1105_regs *regs = priv->info->regs;
 200         u32 switch_reset = BIT(20);
 201
 202         /* Switch core reset */
 203         return sja1105_xfer_u32(priv, SPI_WRITE, regs->rgu, &switch_reset, NULL);
 204 }
 205
 206 int sja1105_inhibit_tx(const struct sja1105_private *priv,
 207                        unsigned long port_bitmap, bool tx_inhibited)
 208 {
 209         const struct sja1105_regs *regs = priv->info->regs;
 210         u32 inhibit_cmd;
 211         int rc;
 212
 213         rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control,
 214                               &inhibit_cmd, NULL);
 215         if (rc < 0)
 216                 return rc;
 217
 218         if (tx_inhibited)
 219                 inhibit_cmd |= port_bitmap;
 220         else
 221                 inhibit_cmd &= ~port_bitmap;
 222
 223         return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control,
 224                                 &inhibit_cmd, NULL);
 225 }
 226
 227 struct sja1105_status {
 228         u64 configs;
 229         u64 crcchkl;
 230         u64 ids;
 231         u64 crcchkg;
 232 };
 233
 234 /* This is not reading the entire General Status area, which is also
 235  * divergent between E/T and P/Q/R/S, but only the relevant bits for
 236  * ensuring that the static config upload procedure was successful.
 237  */
 238 static void sja1105_status_unpack(void *buf, struct sja1105_status *status)
 239 {
 240         /* So that addition translates to 4 bytes */
 241         u32 *p = buf;
 242
 243         /* device_id is missing from the buffer, but we don't
 244          * want to diverge from the manual definition of the
 245          * register addresses, so we'll back off one step with
 246          * the register pointer, and never access p[0].
 247          */
 248         p--;
 249         sja1105_unpack(p + 0x1, &status->configs,   31, 31, 4);
 250         sja1105_unpack(p + 0x1, &status->crcchkl,   30, 30, 4);
 251         sja1105_unpack(p + 0x1, &status->ids,       29, 29, 4);
 252         sja1105_unpack(p + 0x1, &status->crcchkg,   28, 28, 4);
 253 }
 254
 255 static int sja1105_status_get(struct sja1105_private *priv,
 256                               struct sja1105_status *status)
 257 {
 258         const struct sja1105_regs *regs = priv->info->regs;
 259         u8 packed_buf[4];
 260         int rc;
 261
 262         rc = sja1105_xfer_buf(priv, SPI_READ, regs->status, packed_buf, 4);
 263         if (rc < 0)
 264                 return rc;
 265
 266         sja1105_status_unpack(packed_buf, status);
 267
 268         return 0;
 269 }
 270
 271 /* Not const because unpacking priv->static_config into buffers and preparing
 272  * for upload requires the recalculation of table CRCs and updating the
 273  * structures with these.
 274  */
 275 int static_config_buf_prepare_for_upload(struct sja1105_private *priv,
 276                                          void *config_buf, int buf_len)
 277 {
 278         struct sja1105_static_config *config = &priv->static_config;
 279         struct sja1105_table_header final_header;
 280         sja1105_config_valid_t valid;
 281         char *final_header_ptr;
 282         int crc_len;
 283
 284         valid = sja1105_static_config_check_valid(config,
 285                                                   priv->info->max_frame_mem);
 286         if (valid != SJA1105_CONFIG_OK) {
 287                 dev_err(&priv->spidev->dev,
 288                         sja1105_static_config_error_msg[valid]);
 289                 return -EINVAL;
 290         }
 291
 292         /* Write Device ID and config tables to config_buf */
 293         sja1105_static_config_pack(config_buf, config);
 294         /* Recalculate CRC of the last header (right now 0xDEADBEEF).
 295          * Don't include the CRC field itself.
 296          */
 297         crc_len = buf_len - 4;
 298         /* Read the whole table header */
 299         final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER;
 300         sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK);
 301         /* Modify */
 302         final_header.crc = sja1105_crc32(config_buf, crc_len);
 303         /* Rewrite */
 304         sja1105_table_header_packing(final_header_ptr, &final_header, PACK);
 305
 306         return 0;
 307 }
 308
 309 #define RETRIES 10
 310
 311 int sja1105_static_config_upload(struct sja1105_private *priv)
 312 {
 313         struct sja1105_static_config *config = &priv->static_config;
 314         const struct sja1105_regs *regs = priv->info->regs;
 315         struct device *dev = &priv->spidev->dev;
 316         struct dsa_switch *ds = priv->ds;
 317         struct sja1105_status status;
 318         int rc, retries = RETRIES;
 319         u8 *config_buf;
 320         int buf_len;
 321
 322         buf_len = sja1105_static_config_get_length(config);
 323         config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL);
 324         if (!config_buf)
 325                 return -ENOMEM;
 326
 327         rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len);
 328         if (rc < 0) {
 329                 dev_err(dev, "Invalid config, cannot upload\n");
 330                 rc = -EINVAL;
 331                 goto out;
 332         }
 333         /* Prevent PHY jabbering during switch reset by inhibiting
 334          * Tx on all ports and waiting for current packet to drain.
 335          * Otherwise, the PHY will see an unterminated Ethernet packet.
 336          */
 337         rc = sja1105_inhibit_tx(priv, GENMASK_ULL(ds->num_ports - 1, 0), true);
 338         if (rc < 0) {
 339                 dev_err(dev, "Failed to inhibit Tx on ports\n");
 340                 rc = -ENXIO;
 341                 goto out;
 342         }
 343         /* Wait for an eventual egress packet to finish transmission
 344          * (reach IFG). It is guaranteed that a second one will not
 345          * follow, and that switch cold reset is thus safe
 346          */
 347         usleep_range(500, 1000);
 348         do {
 349                 /* Put the SJA1105 in programming mode */
 350                 rc = priv->info->reset_cmd(priv->ds);
 351                 if (rc < 0) {
 352                         dev_err(dev, "Failed to reset switch, retrying...\n");
 353                         continue;
 354                 }
 355                 /* Wait for the switch to come out of reset */
 356                 usleep_range(1000, 5000);
 357                 /* Upload the static config to the device */
 358                 rc = sja1105_xfer_buf(priv, SPI_WRITE, regs->config,
 359                                       config_buf, buf_len);
 360                 if (rc < 0) {
 361                         dev_err(dev, "Failed to upload config, retrying...\n");
 362                         continue;
 363                 }
 364                 /* Check that SJA1105 responded well to the config upload */
 365                 rc = sja1105_status_get(priv, &status);
 366                 if (rc < 0)
 367                         continue;
 368
 369                 if (status.ids == 1) {
 370                         dev_err(dev, "Mismatch between hardware and static config "
 371                                 "device id. Wrote 0x%llx, wants 0x%llx\n",
 372                                 config->device_id, priv->info->device_id);
 373                         continue;
 374                 }
 375                 if (status.crcchkl == 1) {
 376                         dev_err(dev, "Switch reported invalid local CRC on "
 377                                 "the uploaded config, retrying...\n");
 378                         continue;
 379                 }
 380                 if (status.crcchkg == 1) {
 381                         dev_err(dev, "Switch reported invalid global CRC on "
 382                                 "the uploaded config, retrying...\n");
 383                         continue;
 384                 }
 385                 if (status.configs == 0) {
 386                         dev_err(dev, "Switch reported that configuration is "
 387                                 "invalid, retrying...\n");
 388                         continue;
 389                 }
 390                 /* Success! */
 391                 break;
 392         } while (--retries);
 393
 394         if (!retries) {
 395                 rc = -EIO;
 396                 dev_err(dev, "Failed to upload config to device, giving up\n");
 397                 goto out;
 398         } else if (retries != RETRIES) {
 399                 dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries);
 400         }
 401
 402 out:
 403         kfree(config_buf);
 404         return rc;
 405 }
 406
 407 static struct sja1105_regs sja1105et_regs = {
 408         .device_id = 0x0,
 409         .prod_id = 0x100BC3,
 410         .status = 0x1,
 411         .port_control = 0x11,
 412         .vl_status = 0x10000,
 413         .config = 0x020000,
 414         .rgu = 0x100440,
 415         /* UM10944.pdf, Table 86, ACU Register overview */
 416         .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
 417         .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
 418         .rmii_pll1 = 0x10000A,
 419         .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
 420         .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
 421         .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
 422         .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
 423         /* UM10944.pdf, Table 78, CGU Register overview */
 424         .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F},
 425         .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030},
 426         .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
 427         .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035},
 428         .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032},
 429         .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031},
 430         .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034},
 431         .ptpegr_ts = {0xC0, 0xC2, 0xC4, 0xC6, 0xC8},
 432         .ptpschtm = 0x12, /* Spans 0x12 to 0x13 */
 433         .ptppinst = 0x14,
 434         .ptppindur = 0x16,
 435         .ptp_control = 0x17,
 436         .ptpclkval = 0x18, /* Spans 0x18 to 0x19 */
 437         .ptpclkrate = 0x1A,
 438         .ptpclkcorp = 0x1D,
 439         .mdio_100base_tx = SJA1105_RSV_ADDR,
 440         .mdio_100base_t1 = SJA1105_RSV_ADDR,
 441 };
 442
 443 static struct sja1105_regs sja1105pqrs_regs = {
 444         .device_id = 0x0,
 445         .prod_id = 0x100BC3,
 446         .status = 0x1,
 447         .port_control = 0x12,
 448         .vl_status = 0x10000,
 449         .config = 0x020000,
 450         .rgu = 0x100440,
 451         /* UM10944.pdf, Table 86, ACU Register overview */
 452         .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808},
 453         .pad_mii_rx = {0x100801, 0x100803, 0x100805, 0x100807, 0x100809},
 454         .pad_mii_id = {0x100810, 0x100811, 0x100812, 0x100813, 0x100814},
 455         .rmii_pll1 = 0x10000A,
 456         .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F},
 457         .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208},
 458         .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440},
 459         .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640},
 460         .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460},
 461         /* UM11040.pdf, Table 114 */
 462         .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B},
 463         .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C},
 464         .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
 465         .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030},
 466         .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E},
 467         .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D},
 468         .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F},
 469         .ptpegr_ts = {0xC0, 0xC4, 0xC8, 0xCC, 0xD0},
 470         .ptpschtm = 0x13, /* Spans 0x13 to 0x14 */
 471         .ptppinst = 0x15,
 472         .ptppindur = 0x17,
 473         .ptp_control = 0x18,
 474         .ptpclkval = 0x19,
 475         .ptpclkrate = 0x1B,
 476         .ptpclkcorp = 0x1E,
 477         .ptpsyncts = 0x1F,
 478         .mdio_100base_tx = SJA1105_RSV_ADDR,
 479         .mdio_100base_t1 = SJA1105_RSV_ADDR,
 480 };
 481
 482 static struct sja1105_regs sja1110_regs = {
 483         .device_id = SJA1110_SPI_ADDR(0x0),
 484         .prod_id = SJA1110_ACU_ADDR(0xf00),
 485         .status = SJA1110_SPI_ADDR(0x4),
 486         .port_control = SJA1110_SPI_ADDR(0x50), /* actually INHIB_TX */
 487         .vl_status = 0x10000,
 488         .config = 0x020000,
 489         .rgu = SJA1110_RGU_ADDR(0x100), /* Reset Control Register 0 */
 490         /* Ports 2 and 3 are capable of xMII, but there isn't anything to
 491          * configure in the CGU/ACU for them.
 492          */
 493         .pad_mii_tx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 494                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 495                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 496                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 497                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 498                        SJA1105_RSV_ADDR},
 499         .pad_mii_rx = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 500                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 501                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 502                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 503                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 504                        SJA1105_RSV_ADDR},
 505         .pad_mii_id = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 506                        SJA1110_ACU_ADDR(0x18), SJA1110_ACU_ADDR(0x28),
 507                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 508                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 509                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 510                        SJA1105_RSV_ADDR},
 511         .rmii_pll1 = SJA1105_RSV_ADDR,
 512         .cgu_idiv = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 513                      SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 514                      SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 515                      SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 516         .stats[MAC] = {0x200, 0x202, 0x204, 0x206, 0x208, 0x20a,
 517                        0x20c, 0x20e, 0x210, 0x212, 0x214},
 518         .stats[HL1] = {0x400, 0x410, 0x420, 0x430, 0x440, 0x450,
 519                        0x460, 0x470, 0x480, 0x490, 0x4a0},
 520         .stats[HL2] = {0x600, 0x610, 0x620, 0x630, 0x640, 0x650,
 521                        0x660, 0x670, 0x680, 0x690, 0x6a0},
 522         .stats[ETHER] = {0x1400, 0x1418, 0x1430, 0x1448, 0x1460, 0x1478,
 523                          0x1490, 0x14a8, 0x14c0, 0x14d8, 0x14f0},
 524         .mii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 525                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 526                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 527                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 528         .mii_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 529                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 530                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 531                        SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 532         .mii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 533                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 534                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 535                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 536         .mii_ext_rx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 537                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 538                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 539                            SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 540         .rgmii_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 541                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 542                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 543                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 544         .rmii_ref_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 545                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 546                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 547                          SJA1105_RSV_ADDR, SJA1105_RSV_ADDR},
 548         .rmii_ext_tx_clk = {SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 549                             SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 550                             SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 551                             SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 552                             SJA1105_RSV_ADDR, SJA1105_RSV_ADDR,
 553                             SJA1105_RSV_ADDR},
 554         .ptpschtm = SJA1110_SPI_ADDR(0x54),
 555         .ptppinst = SJA1110_SPI_ADDR(0x5c),
 556         .ptppindur = SJA1110_SPI_ADDR(0x64),
 557         .ptp_control = SJA1110_SPI_ADDR(0x68),
 558         .ptpclkval = SJA1110_SPI_ADDR(0x6c),
 559         .ptpclkrate = SJA1110_SPI_ADDR(0x74),
 560         .ptpclkcorp = SJA1110_SPI_ADDR(0x80),
 561         .ptpsyncts = SJA1110_SPI_ADDR(0x84),
 562         .mdio_100base_tx = 0x1c2400,
 563         .mdio_100base_t1 = 0x1c1000,
 564 };
 565
 566 const struct sja1105_info sja1105e_info = {
 567         .device_id              = SJA1105E_DEVICE_ID,
 568         .part_no                = SJA1105ET_PART_NO,
 569         .static_ops             = sja1105e_table_ops,
 570         .dyn_ops                = sja1105et_dyn_ops,
 571         .qinq_tpid              = ETH_P_8021Q,
 572         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 573         .can_limit_mcast_flood  = false,
 574         .ptp_ts_bits            = 24,
 575         .ptpegr_ts_bytes        = 4,
 576         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 577         .num_ports              = SJA1105_NUM_PORTS,
 578         .num_cbs_shapers        = SJA1105ET_MAX_CBS_COUNT,
 579         .reset_cmd              = sja1105et_reset_cmd,
 580         .fdb_add_cmd            = sja1105et_fdb_add,
 581         .fdb_del_cmd            = sja1105et_fdb_del,
 582         .ptp_cmd_packing        = sja1105et_ptp_cmd_packing,
 583         .rxtstamp               = sja1105_rxtstamp,
 584         .clocking_setup         = sja1105_clocking_setup,
 585         .regs                   = &sja1105et_regs,
 586         .port_speed             = {
 587                 [SJA1105_SPEED_AUTO] = 0,
 588                 [SJA1105_SPEED_10MBPS] = 3,
 589                 [SJA1105_SPEED_100MBPS] = 2,
 590                 [SJA1105_SPEED_1000MBPS] = 1,
 591                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 592         },
 593         .supports_mii           = {true, true, true, true, true},
 594         .supports_rmii          = {true, true, true, true, true},
 595         .supports_rgmii         = {true, true, true, true, true},
 596         .name                   = "SJA1105E",
 597 };
 598
 599 const struct sja1105_info sja1105t_info = {
 600         .device_id              = SJA1105T_DEVICE_ID,
 601         .part_no                = SJA1105ET_PART_NO,
 602         .static_ops             = sja1105t_table_ops,
 603         .dyn_ops                = sja1105et_dyn_ops,
 604         .qinq_tpid              = ETH_P_8021Q,
 605         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 606         .can_limit_mcast_flood  = false,
 607         .ptp_ts_bits            = 24,
 608         .ptpegr_ts_bytes        = 4,
 609         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 610         .num_ports              = SJA1105_NUM_PORTS,
 611         .num_cbs_shapers        = SJA1105ET_MAX_CBS_COUNT,
 612         .reset_cmd              = sja1105et_reset_cmd,
 613         .fdb_add_cmd            = sja1105et_fdb_add,
 614         .fdb_del_cmd            = sja1105et_fdb_del,
 615         .ptp_cmd_packing        = sja1105et_ptp_cmd_packing,
 616         .rxtstamp               = sja1105_rxtstamp,
 617         .clocking_setup         = sja1105_clocking_setup,
 618         .regs                   = &sja1105et_regs,
 619         .port_speed             = {
 620                 [SJA1105_SPEED_AUTO] = 0,
 621                 [SJA1105_SPEED_10MBPS] = 3,
 622                 [SJA1105_SPEED_100MBPS] = 2,
 623                 [SJA1105_SPEED_1000MBPS] = 1,
 624                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 625         },
 626         .supports_mii           = {true, true, true, true, true},
 627         .supports_rmii          = {true, true, true, true, true},
 628         .supports_rgmii         = {true, true, true, true, true},
 629         .name                   = "SJA1105T",
 630 };
 631
 632 const struct sja1105_info sja1105p_info = {
 633         .device_id              = SJA1105PR_DEVICE_ID,
 634         .part_no                = SJA1105P_PART_NO,
 635         .static_ops             = sja1105p_table_ops,
 636         .dyn_ops                = sja1105pqrs_dyn_ops,
 637         .qinq_tpid              = ETH_P_8021AD,
 638         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 639         .can_limit_mcast_flood  = true,
 640         .ptp_ts_bits            = 32,
 641         .ptpegr_ts_bytes        = 8,
 642         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 643         .num_ports              = SJA1105_NUM_PORTS,
 644         .num_cbs_shapers        = SJA1105PQRS_MAX_CBS_COUNT,
 645         .setup_rgmii_delay      = sja1105pqrs_setup_rgmii_delay,
 646         .reset_cmd              = sja1105pqrs_reset_cmd,
 647         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 648         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 649         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 650         .rxtstamp               = sja1105_rxtstamp,
 651         .clocking_setup         = sja1105_clocking_setup,
 652         .regs                   = &sja1105pqrs_regs,
 653         .port_speed             = {
 654                 [SJA1105_SPEED_AUTO] = 0,
 655                 [SJA1105_SPEED_10MBPS] = 3,
 656                 [SJA1105_SPEED_100MBPS] = 2,
 657                 [SJA1105_SPEED_1000MBPS] = 1,
 658                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 659         },
 660         .supports_mii           = {true, true, true, true, true},
 661         .supports_rmii          = {true, true, true, true, true},
 662         .supports_rgmii         = {true, true, true, true, true},
 663         .name                   = "SJA1105P",
 664 };
 665
 666 const struct sja1105_info sja1105q_info = {
 667         .device_id              = SJA1105QS_DEVICE_ID,
 668         .part_no                = SJA1105Q_PART_NO,
 669         .static_ops             = sja1105q_table_ops,
 670         .dyn_ops                = sja1105pqrs_dyn_ops,
 671         .qinq_tpid              = ETH_P_8021AD,
 672         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 673         .can_limit_mcast_flood  = true,
 674         .ptp_ts_bits            = 32,
 675         .ptpegr_ts_bytes        = 8,
 676         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 677         .num_ports              = SJA1105_NUM_PORTS,
 678         .num_cbs_shapers        = SJA1105PQRS_MAX_CBS_COUNT,
 679         .setup_rgmii_delay      = sja1105pqrs_setup_rgmii_delay,
 680         .reset_cmd              = sja1105pqrs_reset_cmd,
 681         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 682         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 683         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 684         .rxtstamp               = sja1105_rxtstamp,
 685         .clocking_setup         = sja1105_clocking_setup,
 686         .regs                   = &sja1105pqrs_regs,
 687         .port_speed             = {
 688                 [SJA1105_SPEED_AUTO] = 0,
 689                 [SJA1105_SPEED_10MBPS] = 3,
 690                 [SJA1105_SPEED_100MBPS] = 2,
 691                 [SJA1105_SPEED_1000MBPS] = 1,
 692                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 693         },
 694         .supports_mii           = {true, true, true, true, true},
 695         .supports_rmii          = {true, true, true, true, true},
 696         .supports_rgmii         = {true, true, true, true, true},
 697         .name                   = "SJA1105Q",
 698 };
 699
 700 const struct sja1105_info sja1105r_info = {
 701         .device_id              = SJA1105PR_DEVICE_ID,
 702         .part_no                = SJA1105R_PART_NO,
 703         .static_ops             = sja1105r_table_ops,
 704         .dyn_ops                = sja1105pqrs_dyn_ops,
 705         .qinq_tpid              = ETH_P_8021AD,
 706         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 707         .can_limit_mcast_flood  = true,
 708         .ptp_ts_bits            = 32,
 709         .ptpegr_ts_bytes        = 8,
 710         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 711         .num_ports              = SJA1105_NUM_PORTS,
 712         .num_cbs_shapers        = SJA1105PQRS_MAX_CBS_COUNT,
 713         .setup_rgmii_delay      = sja1105pqrs_setup_rgmii_delay,
 714         .reset_cmd              = sja1105pqrs_reset_cmd,
 715         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 716         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 717         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 718         .rxtstamp               = sja1105_rxtstamp,
 719         .clocking_setup         = sja1105_clocking_setup,
 720         .pcs_mdio_read          = sja1105_pcs_mdio_read,
 721         .pcs_mdio_write         = sja1105_pcs_mdio_write,
 722         .regs                   = &sja1105pqrs_regs,
 723         .port_speed             = {
 724                 [SJA1105_SPEED_AUTO] = 0,
 725                 [SJA1105_SPEED_10MBPS] = 3,
 726                 [SJA1105_SPEED_100MBPS] = 2,
 727                 [SJA1105_SPEED_1000MBPS] = 1,
 728                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 729         },
 730         .supports_mii           = {true, true, true, true, true},
 731         .supports_rmii          = {true, true, true, true, true},
 732         .supports_rgmii         = {true, true, true, true, true},
 733         .supports_sgmii         = {false, false, false, false, true},
 734         .name                   = "SJA1105R",
 735 };
 736
 737 const struct sja1105_info sja1105s_info = {
 738         .device_id              = SJA1105QS_DEVICE_ID,
 739         .part_no                = SJA1105S_PART_NO,
 740         .static_ops             = sja1105s_table_ops,
 741         .dyn_ops                = sja1105pqrs_dyn_ops,
 742         .regs                   = &sja1105pqrs_regs,
 743         .qinq_tpid              = ETH_P_8021AD,
 744         .tag_proto              = DSA_TAG_PROTO_SJA1105,
 745         .can_limit_mcast_flood  = true,
 746         .ptp_ts_bits            = 32,
 747         .ptpegr_ts_bytes        = 8,
 748         .max_frame_mem          = SJA1105_MAX_FRAME_MEMORY,
 749         .num_ports              = SJA1105_NUM_PORTS,
 750         .num_cbs_shapers        = SJA1105PQRS_MAX_CBS_COUNT,
 751         .setup_rgmii_delay      = sja1105pqrs_setup_rgmii_delay,
 752         .reset_cmd              = sja1105pqrs_reset_cmd,
 753         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 754         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 755         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 756         .rxtstamp               = sja1105_rxtstamp,
 757         .clocking_setup         = sja1105_clocking_setup,
 758         .pcs_mdio_read          = sja1105_pcs_mdio_read,
 759         .pcs_mdio_write         = sja1105_pcs_mdio_write,
 760         .port_speed             = {
 761                 [SJA1105_SPEED_AUTO] = 0,
 762                 [SJA1105_SPEED_10MBPS] = 3,
 763                 [SJA1105_SPEED_100MBPS] = 2,
 764                 [SJA1105_SPEED_1000MBPS] = 1,
 765                 [SJA1105_SPEED_2500MBPS] = 0, /* Not supported */
 766         },
 767         .supports_mii           = {true, true, true, true, true},
 768         .supports_rmii          = {true, true, true, true, true},
 769         .supports_rgmii         = {true, true, true, true, true},
 770         .supports_sgmii         = {false, false, false, false, true},
 771         .name                   = "SJA1105S",
 772 };
 773
 774 const struct sja1105_info sja1110a_info = {
 775         .device_id              = SJA1110_DEVICE_ID,
 776         .part_no                = SJA1110A_PART_NO,
 777         .static_ops             = sja1110_table_ops,
 778         .dyn_ops                = sja1110_dyn_ops,
 779         .regs                   = &sja1110_regs,
 780         .qinq_tpid              = ETH_P_8021AD,
 781         .tag_proto              = DSA_TAG_PROTO_SJA1110,
 782         .can_limit_mcast_flood  = true,
 783         .multiple_cascade_ports = true,
 784         .ptp_ts_bits            = 32,
 785         .ptpegr_ts_bytes        = 8,
 786         .max_frame_mem          = SJA1110_MAX_FRAME_MEMORY,
 787         .num_ports              = SJA1110_NUM_PORTS,
 788         .num_cbs_shapers        = SJA1110_MAX_CBS_COUNT,
 789         .setup_rgmii_delay      = sja1110_setup_rgmii_delay,
 790         .reset_cmd              = sja1110_reset_cmd,
 791         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 792         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 793         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 794         .rxtstamp               = sja1110_rxtstamp,
 795         .txtstamp               = sja1110_txtstamp,
 796         .clocking_setup         = sja1110_clocking_setup,
 797         .port_speed             = {
 798                 [SJA1105_SPEED_AUTO] = 0,
 799                 [SJA1105_SPEED_10MBPS] = 4,
 800                 [SJA1105_SPEED_100MBPS] = 3,
 801                 [SJA1105_SPEED_1000MBPS] = 2,
 802                 [SJA1105_SPEED_2500MBPS] = 1,
 803         },
 804         .supports_mii           = {true, true, true, true, false,
 805                                    true, true, true, true, true, true},
 806         .supports_rmii          = {false, false, true, true, false,
 807                                    false, false, false, false, false, false},
 808         .supports_rgmii         = {false, false, true, true, false,
 809                                    false, false, false, false, false, false},
 810         .supports_sgmii         = {false, true, true, true, true,
 811                                    false, false, false, false, false, false},
 812         .supports_2500basex     = {false, false, false, true, true,
 813                                    false, false, false, false, false, false},
 814         .internal_phy           = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
 815                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 816                                    SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
 817                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 818                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 819                                    SJA1105_PHY_BASE_T1},
 820         .name                   = "SJA1110A",
 821 };
 822
 823 const struct sja1105_info sja1110b_info = {
 824         .device_id              = SJA1110_DEVICE_ID,
 825         .part_no                = SJA1110B_PART_NO,
 826         .static_ops             = sja1110_table_ops,
 827         .dyn_ops                = sja1110_dyn_ops,
 828         .regs                   = &sja1110_regs,
 829         .qinq_tpid              = ETH_P_8021AD,
 830         .tag_proto              = DSA_TAG_PROTO_SJA1110,
 831         .can_limit_mcast_flood  = true,
 832         .multiple_cascade_ports = true,
 833         .ptp_ts_bits            = 32,
 834         .ptpegr_ts_bytes        = 8,
 835         .max_frame_mem          = SJA1110_MAX_FRAME_MEMORY,
 836         .num_ports              = SJA1110_NUM_PORTS,
 837         .num_cbs_shapers        = SJA1110_MAX_CBS_COUNT,
 838         .setup_rgmii_delay      = sja1110_setup_rgmii_delay,
 839         .reset_cmd              = sja1110_reset_cmd,
 840         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 841         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 842         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 843         .rxtstamp               = sja1110_rxtstamp,
 844         .txtstamp               = sja1110_txtstamp,
 845         .clocking_setup         = sja1110_clocking_setup,
 846         .port_speed             = {
 847                 [SJA1105_SPEED_AUTO] = 0,
 848                 [SJA1105_SPEED_10MBPS] = 4,
 849                 [SJA1105_SPEED_100MBPS] = 3,
 850                 [SJA1105_SPEED_1000MBPS] = 2,
 851                 [SJA1105_SPEED_2500MBPS] = 1,
 852         },
 853         .supports_mii           = {true, true, true, true, false,
 854                                    true, true, true, true, true, false},
 855         .supports_rmii          = {false, false, true, true, false,
 856                                    false, false, false, false, false, false},
 857         .supports_rgmii         = {false, false, true, true, false,
 858                                    false, false, false, false, false, false},
 859         .supports_sgmii         = {false, false, false, true, true,
 860                                    false, false, false, false, false, false},
 861         .supports_2500basex     = {false, false, false, true, true,
 862                                    false, false, false, false, false, false},
 863         .internal_phy           = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
 864                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 865                                    SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
 866                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 867                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 868                                    SJA1105_NO_PHY},
 869         .name                   = "SJA1110B",
 870 };
 871
 872 const struct sja1105_info sja1110c_info = {
 873         .device_id              = SJA1110_DEVICE_ID,
 874         .part_no                = SJA1110C_PART_NO,
 875         .static_ops             = sja1110_table_ops,
 876         .dyn_ops                = sja1110_dyn_ops,
 877         .regs                   = &sja1110_regs,
 878         .qinq_tpid              = ETH_P_8021AD,
 879         .tag_proto              = DSA_TAG_PROTO_SJA1110,
 880         .can_limit_mcast_flood  = true,
 881         .multiple_cascade_ports = true,
 882         .ptp_ts_bits            = 32,
 883         .ptpegr_ts_bytes        = 8,
 884         .max_frame_mem          = SJA1110_MAX_FRAME_MEMORY,
 885         .num_ports              = SJA1110_NUM_PORTS,
 886         .num_cbs_shapers        = SJA1110_MAX_CBS_COUNT,
 887         .setup_rgmii_delay      = sja1110_setup_rgmii_delay,
 888         .reset_cmd              = sja1110_reset_cmd,
 889         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 890         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 891         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 892         .rxtstamp               = sja1110_rxtstamp,
 893         .txtstamp               = sja1110_txtstamp,
 894         .clocking_setup         = sja1110_clocking_setup,
 895         .port_speed             = {
 896                 [SJA1105_SPEED_AUTO] = 0,
 897                 [SJA1105_SPEED_10MBPS] = 4,
 898                 [SJA1105_SPEED_100MBPS] = 3,
 899                 [SJA1105_SPEED_1000MBPS] = 2,
 900                 [SJA1105_SPEED_2500MBPS] = 1,
 901         },
 902         .supports_mii           = {true, true, true, true, false,
 903                                    true, true, true, false, false, false},
 904         .supports_rmii          = {false, false, true, true, false,
 905                                    false, false, false, false, false, false},
 906         .supports_rgmii         = {false, false, true, true, false,
 907                                    false, false, false, false, false, false},
 908         .supports_sgmii         = {false, false, false, false, true,
 909                                    false, false, false, false, false, false},
 910         .supports_2500basex     = {false, false, false, false, true,
 911                                    false, false, false, false, false, false},
 912         .internal_phy           = {SJA1105_NO_PHY, SJA1105_PHY_BASE_TX,
 913                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 914                                    SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
 915                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 916                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 917                                    SJA1105_NO_PHY},
 918         .name                   = "SJA1110C",
 919 };
 920
 921 const struct sja1105_info sja1110d_info = {
 922         .device_id              = SJA1110_DEVICE_ID,
 923         .part_no                = SJA1110D_PART_NO,
 924         .static_ops             = sja1110_table_ops,
 925         .dyn_ops                = sja1110_dyn_ops,
 926         .regs                   = &sja1110_regs,
 927         .qinq_tpid              = ETH_P_8021AD,
 928         .tag_proto              = DSA_TAG_PROTO_SJA1110,
 929         .can_limit_mcast_flood  = true,
 930         .multiple_cascade_ports = true,
 931         .ptp_ts_bits            = 32,
 932         .ptpegr_ts_bytes        = 8,
 933         .max_frame_mem          = SJA1110_MAX_FRAME_MEMORY,
 934         .num_ports              = SJA1110_NUM_PORTS,
 935         .num_cbs_shapers        = SJA1110_MAX_CBS_COUNT,
 936         .setup_rgmii_delay      = sja1110_setup_rgmii_delay,
 937         .reset_cmd              = sja1110_reset_cmd,
 938         .fdb_add_cmd            = sja1105pqrs_fdb_add,
 939         .fdb_del_cmd            = sja1105pqrs_fdb_del,
 940         .ptp_cmd_packing        = sja1105pqrs_ptp_cmd_packing,
 941         .rxtstamp               = sja1110_rxtstamp,
 942         .txtstamp               = sja1110_txtstamp,
 943         .clocking_setup         = sja1110_clocking_setup,
 944         .port_speed             = {
 945                 [SJA1105_SPEED_AUTO] = 0,
 946                 [SJA1105_SPEED_10MBPS] = 4,
 947                 [SJA1105_SPEED_100MBPS] = 3,
 948                 [SJA1105_SPEED_1000MBPS] = 2,
 949                 [SJA1105_SPEED_2500MBPS] = 1,
 950         },
 951         .supports_mii           = {true, false, true, false, false,
 952                                    true, true, true, false, false, false},
 953         .supports_rmii          = {false, false, true, false, false,
 954                                    false, false, false, false, false, false},
 955         .supports_rgmii         = {false, false, true, false, false,
 956                                    false, false, false, false, false, false},
 957         .supports_sgmii         = {false, true, true, true, true,
 958                                    false, false, false, false, false, false},
 959         .internal_phy           = {SJA1105_NO_PHY, SJA1105_NO_PHY,
 960                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 961                                    SJA1105_NO_PHY, SJA1105_PHY_BASE_T1,
 962                                    SJA1105_PHY_BASE_T1, SJA1105_PHY_BASE_T1,
 963                                    SJA1105_NO_PHY, SJA1105_NO_PHY,
 964                                    SJA1105_NO_PHY},
 965         .name                   = "SJA1110D",
 966 };