Merge tag 'mtd/for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
[linux-2.6-microblaze.git] / drivers / mtd / nand / raw / nand_bbt.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Overview:
4  *   Bad block table support for the NAND driver
5  *
6  *  Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
7  *
8  * Description:
9  *
10  * When nand_scan_bbt is called, then it tries to find the bad block table
11  * depending on the options in the BBT descriptor(s). If no flash based BBT
12  * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
13  * marked good / bad blocks. This information is used to create a memory BBT.
14  * Once a new bad block is discovered then the "factory" information is updated
15  * on the device.
16  * If a flash based BBT is specified then the function first tries to find the
17  * BBT on flash. If a BBT is found then the contents are read and the memory
18  * based BBT is created. If a mirrored BBT is selected then the mirror is
19  * searched too and the versions are compared. If the mirror has a greater
20  * version number, then the mirror BBT is used to build the memory based BBT.
21  * If the tables are not versioned, then we "or" the bad block information.
22  * If one of the BBTs is out of date or does not exist it is (re)created.
23  * If no BBT exists at all then the device is scanned for factory marked
24  * good / bad blocks and the bad block tables are created.
25  *
26  * For manufacturer created BBTs like the one found on M-SYS DOC devices
27  * the BBT is searched and read but never created
28  *
29  * The auto generated bad block table is located in the last good blocks
30  * of the device. The table is mirrored, so it can be updated eventually.
31  * The table is marked in the OOB area with an ident pattern and a version
32  * number which indicates which of both tables is more up to date. If the NAND
33  * controller needs the complete OOB area for the ECC information then the
34  * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
35  * course): it moves the ident pattern and the version byte into the data area
36  * and the OOB area will remain untouched.
37  *
38  * The table uses 2 bits per block
39  * 11b:         block is good
40  * 00b:         block is factory marked bad
41  * 01b, 10b:    block is marked bad due to wear
42  *
43  * The memory bad block table uses the following scheme:
44  * 00b:         block is good
45  * 01b:         block is marked bad due to wear
46  * 10b:         block is reserved (to protect the bbt area)
47  * 11b:         block is factory marked bad
48  *
49  * Multichip devices like DOC store the bad block info per floor.
50  *
51  * Following assumptions are made:
52  * - bbts start at a page boundary, if autolocated on a block boundary
53  * - the space necessary for a bbt in FLASH does not exceed a block boundary
54  */
55
56 #include <linux/slab.h>
57 #include <linux/types.h>
58 #include <linux/mtd/mtd.h>
59 #include <linux/mtd/bbm.h>
60 #include <linux/bitops.h>
61 #include <linux/delay.h>
62 #include <linux/vmalloc.h>
63 #include <linux/export.h>
64 #include <linux/string.h>
65
66 #include "internals.h"
67
68 #define BBT_BLOCK_GOOD          0x00
69 #define BBT_BLOCK_WORN          0x01
70 #define BBT_BLOCK_RESERVED      0x02
71 #define BBT_BLOCK_FACTORY_BAD   0x03
72
73 #define BBT_ENTRY_MASK          0x03
74 #define BBT_ENTRY_SHIFT         2
75
76 static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
77 {
78         uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
79         entry >>= (block & BBT_ENTRY_MASK) * 2;
80         return entry & BBT_ENTRY_MASK;
81 }
82
83 static inline void bbt_mark_entry(struct nand_chip *chip, int block,
84                 uint8_t mark)
85 {
86         uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
87         chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
88 }
89
90 static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
91 {
92         if (memcmp(buf, td->pattern, td->len))
93                 return -1;
94         return 0;
95 }
96
97 /**
98  * check_pattern - [GENERIC] check if a pattern is in the buffer
99  * @buf: the buffer to search
100  * @len: the length of buffer to search
101  * @paglen: the pagelength
102  * @td: search pattern descriptor
103  *
104  * Check for a pattern at the given place. Used to search bad block tables and
105  * good / bad block identifiers.
106  */
107 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
108 {
109         if (td->options & NAND_BBT_NO_OOB)
110                 return check_pattern_no_oob(buf, td);
111
112         /* Compare the pattern */
113         if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
114                 return -1;
115
116         return 0;
117 }
118
119 /**
120  * check_short_pattern - [GENERIC] check if a pattern is in the buffer
121  * @buf: the buffer to search
122  * @td: search pattern descriptor
123  *
124  * Check for a pattern at the given place. Used to search bad block tables and
125  * good / bad block identifiers. Same as check_pattern, but no optional empty
126  * check.
127  */
128 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
129 {
130         /* Compare the pattern */
131         if (memcmp(buf + td->offs, td->pattern, td->len))
132                 return -1;
133         return 0;
134 }
135
136 /**
137  * add_marker_len - compute the length of the marker in data area
138  * @td: BBT descriptor used for computation
139  *
140  * The length will be 0 if the marker is located in OOB area.
141  */
142 static u32 add_marker_len(struct nand_bbt_descr *td)
143 {
144         u32 len;
145
146         if (!(td->options & NAND_BBT_NO_OOB))
147                 return 0;
148
149         len = td->len;
150         if (td->options & NAND_BBT_VERSION)
151                 len++;
152         return len;
153 }
154
155 /**
156  * read_bbt - [GENERIC] Read the bad block table starting from page
157  * @this: NAND chip object
158  * @buf: temporary buffer
159  * @page: the starting page
160  * @num: the number of bbt descriptors to read
161  * @td: the bbt describtion table
162  * @offs: block number offset in the table
163  *
164  * Read the bad block table starting from page.
165  */
166 static int read_bbt(struct nand_chip *this, uint8_t *buf, int page, int num,
167                     struct nand_bbt_descr *td, int offs)
168 {
169         struct mtd_info *mtd = nand_to_mtd(this);
170         int res, ret = 0, i, j, act = 0;
171         size_t retlen, len, totlen;
172         loff_t from;
173         int bits = td->options & NAND_BBT_NRBITS_MSK;
174         uint8_t msk = (uint8_t)((1 << bits) - 1);
175         u32 marker_len;
176         int reserved_block_code = td->reserved_block_code;
177
178         totlen = (num * bits) >> 3;
179         marker_len = add_marker_len(td);
180         from = ((loff_t)page) << this->page_shift;
181
182         while (totlen) {
183                 len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
184                 if (marker_len) {
185                         /*
186                          * In case the BBT marker is not in the OOB area it
187                          * will be just in the first page.
188                          */
189                         len -= marker_len;
190                         from += marker_len;
191                         marker_len = 0;
192                 }
193                 res = mtd_read(mtd, from, len, &retlen, buf);
194                 if (res < 0) {
195                         if (mtd_is_eccerr(res)) {
196                                 pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
197                                         from & ~mtd->writesize);
198                                 return res;
199                         } else if (mtd_is_bitflip(res)) {
200                                 pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
201                                         from & ~mtd->writesize);
202                                 ret = res;
203                         } else {
204                                 pr_info("nand_bbt: error reading BBT\n");
205                                 return res;
206                         }
207                 }
208
209                 /* Analyse data */
210                 for (i = 0; i < len; i++) {
211                         uint8_t dat = buf[i];
212                         for (j = 0; j < 8; j += bits, act++) {
213                                 uint8_t tmp = (dat >> j) & msk;
214                                 if (tmp == msk)
215                                         continue;
216                                 if (reserved_block_code && (tmp == reserved_block_code)) {
217                                         pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
218                                                  (loff_t)(offs + act) <<
219                                                  this->bbt_erase_shift);
220                                         bbt_mark_entry(this, offs + act,
221                                                         BBT_BLOCK_RESERVED);
222                                         mtd->ecc_stats.bbtblocks++;
223                                         continue;
224                                 }
225                                 /*
226                                  * Leave it for now, if it's matured we can
227                                  * move this message to pr_debug.
228                                  */
229                                 pr_info("nand_read_bbt: bad block at 0x%012llx\n",
230                                          (loff_t)(offs + act) <<
231                                          this->bbt_erase_shift);
232                                 /* Factory marked bad or worn out? */
233                                 if (tmp == 0)
234                                         bbt_mark_entry(this, offs + act,
235                                                         BBT_BLOCK_FACTORY_BAD);
236                                 else
237                                         bbt_mark_entry(this, offs + act,
238                                                         BBT_BLOCK_WORN);
239                                 mtd->ecc_stats.badblocks++;
240                         }
241                 }
242                 totlen -= len;
243                 from += len;
244         }
245         return ret;
246 }
247
248 /**
249  * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
250  * @this: NAND chip object
251  * @buf: temporary buffer
252  * @td: descriptor for the bad block table
253  * @chip: read the table for a specific chip, -1 read all chips; applies only if
254  *        NAND_BBT_PERCHIP option is set
255  *
256  * Read the bad block table for all chips starting at a given page. We assume
257  * that the bbt bits are in consecutive order.
258  */
259 static int read_abs_bbt(struct nand_chip *this, uint8_t *buf,
260                         struct nand_bbt_descr *td, int chip)
261 {
262         struct mtd_info *mtd = nand_to_mtd(this);
263         u64 targetsize = nanddev_target_size(&this->base);
264         int res = 0, i;
265
266         if (td->options & NAND_BBT_PERCHIP) {
267                 int offs = 0;
268                 for (i = 0; i < nanddev_ntargets(&this->base); i++) {
269                         if (chip == -1 || chip == i)
270                                 res = read_bbt(this, buf, td->pages[i],
271                                         targetsize >> this->bbt_erase_shift,
272                                         td, offs);
273                         if (res)
274                                 return res;
275                         offs += targetsize >> this->bbt_erase_shift;
276                 }
277         } else {
278                 res = read_bbt(this, buf, td->pages[0],
279                                 mtd->size >> this->bbt_erase_shift, td, 0);
280                 if (res)
281                         return res;
282         }
283         return 0;
284 }
285
286 /* BBT marker is in the first page, no OOB */
287 static int scan_read_data(struct nand_chip *this, uint8_t *buf, loff_t offs,
288                           struct nand_bbt_descr *td)
289 {
290         struct mtd_info *mtd = nand_to_mtd(this);
291         size_t retlen;
292         size_t len;
293
294         len = td->len;
295         if (td->options & NAND_BBT_VERSION)
296                 len++;
297
298         return mtd_read(mtd, offs, len, &retlen, buf);
299 }
300
301 /**
302  * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
303  * @this: NAND chip object
304  * @buf: temporary buffer
305  * @offs: offset at which to scan
306  * @len: length of data region to read
307  *
308  * Scan read data from data+OOB. May traverse multiple pages, interleaving
309  * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
310  * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
311  */
312 static int scan_read_oob(struct nand_chip *this, uint8_t *buf, loff_t offs,
313                          size_t len)
314 {
315         struct mtd_info *mtd = nand_to_mtd(this);
316         struct mtd_oob_ops ops;
317         int res, ret = 0;
318
319         ops.mode = MTD_OPS_PLACE_OOB;
320         ops.ooboffs = 0;
321         ops.ooblen = mtd->oobsize;
322
323         while (len > 0) {
324                 ops.datbuf = buf;
325                 ops.len = min(len, (size_t)mtd->writesize);
326                 ops.oobbuf = buf + ops.len;
327
328                 res = mtd_read_oob(mtd, offs, &ops);
329                 if (res) {
330                         if (!mtd_is_bitflip_or_eccerr(res))
331                                 return res;
332                         else if (mtd_is_eccerr(res) || !ret)
333                                 ret = res;
334                 }
335
336                 buf += mtd->oobsize + mtd->writesize;
337                 len -= mtd->writesize;
338                 offs += mtd->writesize;
339         }
340         return ret;
341 }
342
343 static int scan_read(struct nand_chip *this, uint8_t *buf, loff_t offs,
344                      size_t len, struct nand_bbt_descr *td)
345 {
346         if (td->options & NAND_BBT_NO_OOB)
347                 return scan_read_data(this, buf, offs, td);
348         else
349                 return scan_read_oob(this, buf, offs, len);
350 }
351
352 /* Scan write data with oob to flash */
353 static int scan_write_bbt(struct nand_chip *this, loff_t offs, size_t len,
354                           uint8_t *buf, uint8_t *oob)
355 {
356         struct mtd_info *mtd = nand_to_mtd(this);
357         struct mtd_oob_ops ops;
358
359         ops.mode = MTD_OPS_PLACE_OOB;
360         ops.ooboffs = 0;
361         ops.ooblen = mtd->oobsize;
362         ops.datbuf = buf;
363         ops.oobbuf = oob;
364         ops.len = len;
365
366         return mtd_write_oob(mtd, offs, &ops);
367 }
368
369 static u32 bbt_get_ver_offs(struct nand_chip *this, struct nand_bbt_descr *td)
370 {
371         struct mtd_info *mtd = nand_to_mtd(this);
372         u32 ver_offs = td->veroffs;
373
374         if (!(td->options & NAND_BBT_NO_OOB))
375                 ver_offs += mtd->writesize;
376         return ver_offs;
377 }
378
379 /**
380  * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
381  * @this: NAND chip object
382  * @buf: temporary buffer
383  * @td: descriptor for the bad block table
384  * @md: descriptor for the bad block table mirror
385  *
386  * Read the bad block table(s) for all chips starting at a given page. We
387  * assume that the bbt bits are in consecutive order.
388  */
389 static void read_abs_bbts(struct nand_chip *this, uint8_t *buf,
390                           struct nand_bbt_descr *td, struct nand_bbt_descr *md)
391 {
392         struct mtd_info *mtd = nand_to_mtd(this);
393
394         /* Read the primary version, if available */
395         if (td->options & NAND_BBT_VERSION) {
396                 scan_read(this, buf, (loff_t)td->pages[0] << this->page_shift,
397                           mtd->writesize, td);
398                 td->version[0] = buf[bbt_get_ver_offs(this, td)];
399                 pr_info("Bad block table at page %d, version 0x%02X\n",
400                          td->pages[0], td->version[0]);
401         }
402
403         /* Read the mirror version, if available */
404         if (md && (md->options & NAND_BBT_VERSION)) {
405                 scan_read(this, buf, (loff_t)md->pages[0] << this->page_shift,
406                           mtd->writesize, md);
407                 md->version[0] = buf[bbt_get_ver_offs(this, md)];
408                 pr_info("Bad block table at page %d, version 0x%02X\n",
409                          md->pages[0], md->version[0]);
410         }
411 }
412
413 /* Scan a given block partially */
414 static int scan_block_fast(struct nand_chip *this, struct nand_bbt_descr *bd,
415                            loff_t offs, uint8_t *buf)
416 {
417         struct mtd_info *mtd = nand_to_mtd(this);
418
419         struct mtd_oob_ops ops;
420         int ret, page_offset;
421
422         ops.ooblen = mtd->oobsize;
423         ops.oobbuf = buf;
424         ops.ooboffs = 0;
425         ops.datbuf = NULL;
426         ops.mode = MTD_OPS_PLACE_OOB;
427
428         page_offset = nand_bbm_get_next_page(this, 0);
429
430         while (page_offset >= 0) {
431                 /*
432                  * Read the full oob until read_oob is fixed to handle single
433                  * byte reads for 16 bit buswidth.
434                  */
435                 ret = mtd_read_oob(mtd, offs + (page_offset * mtd->writesize),
436                                    &ops);
437                 /* Ignore ECC errors when checking for BBM */
438                 if (ret && !mtd_is_bitflip_or_eccerr(ret))
439                         return ret;
440
441                 if (check_short_pattern(buf, bd))
442                         return 1;
443
444                 page_offset = nand_bbm_get_next_page(this, page_offset + 1);
445         }
446
447         return 0;
448 }
449
450 /* Check if a potential BBT block is marked as bad */
451 static int bbt_block_checkbad(struct nand_chip *this, struct nand_bbt_descr *td,
452                               loff_t offs, uint8_t *buf)
453 {
454         struct nand_bbt_descr *bd = this->badblock_pattern;
455
456         /*
457          * No need to check for a bad BBT block if the BBM area overlaps with
458          * the bad block table marker area in OOB since writing a BBM here
459          * invalidates the bad block table marker anyway.
460          */
461         if (!(td->options & NAND_BBT_NO_OOB) &&
462             td->offs >= bd->offs && td->offs < bd->offs + bd->len)
463                 return 0;
464
465         /*
466          * There is no point in checking for a bad block marker if writing
467          * such marker is not supported
468          */
469         if (this->bbt_options & NAND_BBT_NO_OOB_BBM ||
470             this->options & NAND_NO_BBM_QUIRK)
471                 return 0;
472
473         if (scan_block_fast(this, bd, offs, buf) > 0)
474                 return 1;
475
476         return 0;
477 }
478
479 /**
480  * create_bbt - [GENERIC] Create a bad block table by scanning the device
481  * @this: NAND chip object
482  * @buf: temporary buffer
483  * @bd: descriptor for the good/bad block search pattern
484  * @chip: create the table for a specific chip, -1 read all chips; applies only
485  *        if NAND_BBT_PERCHIP option is set
486  *
487  * Create a bad block table by scanning the device for the given good/bad block
488  * identify pattern.
489  */
490 static int create_bbt(struct nand_chip *this, uint8_t *buf,
491                       struct nand_bbt_descr *bd, int chip)
492 {
493         u64 targetsize = nanddev_target_size(&this->base);
494         struct mtd_info *mtd = nand_to_mtd(this);
495         int i, numblocks, startblock;
496         loff_t from;
497
498         pr_info("Scanning device for bad blocks\n");
499
500         if (chip == -1) {
501                 numblocks = mtd->size >> this->bbt_erase_shift;
502                 startblock = 0;
503                 from = 0;
504         } else {
505                 if (chip >= nanddev_ntargets(&this->base)) {
506                         pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
507                                 chip + 1, nanddev_ntargets(&this->base));
508                         return -EINVAL;
509                 }
510                 numblocks = targetsize >> this->bbt_erase_shift;
511                 startblock = chip * numblocks;
512                 numblocks += startblock;
513                 from = (loff_t)startblock << this->bbt_erase_shift;
514         }
515
516         for (i = startblock; i < numblocks; i++) {
517                 int ret;
518
519                 BUG_ON(bd->options & NAND_BBT_NO_OOB);
520
521                 ret = scan_block_fast(this, bd, from, buf);
522                 if (ret < 0)
523                         return ret;
524
525                 if (ret) {
526                         bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
527                         pr_warn("Bad eraseblock %d at 0x%012llx\n",
528                                 i, (unsigned long long)from);
529                         mtd->ecc_stats.badblocks++;
530                 }
531
532                 from += (1 << this->bbt_erase_shift);
533         }
534         return 0;
535 }
536
537 /**
538  * search_bbt - [GENERIC] scan the device for a specific bad block table
539  * @this: NAND chip object
540  * @buf: temporary buffer
541  * @td: descriptor for the bad block table
542  *
543  * Read the bad block table by searching for a given ident pattern. Search is
544  * preformed either from the beginning up or from the end of the device
545  * downwards. The search starts always at the start of a block. If the option
546  * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
547  * the bad block information of this chip. This is necessary to provide support
548  * for certain DOC devices.
549  *
550  * The bbt ident pattern resides in the oob area of the first page in a block.
551  */
552 static int search_bbt(struct nand_chip *this, uint8_t *buf,
553                       struct nand_bbt_descr *td)
554 {
555         u64 targetsize = nanddev_target_size(&this->base);
556         struct mtd_info *mtd = nand_to_mtd(this);
557         int i, chips;
558         int startblock, block, dir;
559         int scanlen = mtd->writesize + mtd->oobsize;
560         int bbtblocks;
561         int blocktopage = this->bbt_erase_shift - this->page_shift;
562
563         /* Search direction top -> down? */
564         if (td->options & NAND_BBT_LASTBLOCK) {
565                 startblock = (mtd->size >> this->bbt_erase_shift) - 1;
566                 dir = -1;
567         } else {
568                 startblock = 0;
569                 dir = 1;
570         }
571
572         /* Do we have a bbt per chip? */
573         if (td->options & NAND_BBT_PERCHIP) {
574                 chips = nanddev_ntargets(&this->base);
575                 bbtblocks = targetsize >> this->bbt_erase_shift;
576                 startblock &= bbtblocks - 1;
577         } else {
578                 chips = 1;
579                 bbtblocks = mtd->size >> this->bbt_erase_shift;
580         }
581
582         for (i = 0; i < chips; i++) {
583                 /* Reset version information */
584                 td->version[i] = 0;
585                 td->pages[i] = -1;
586                 /* Scan the maximum number of blocks */
587                 for (block = 0; block < td->maxblocks; block++) {
588
589                         int actblock = startblock + dir * block;
590                         loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
591
592                         /* Check if block is marked bad */
593                         if (bbt_block_checkbad(this, td, offs, buf))
594                                 continue;
595
596                         /* Read first page */
597                         scan_read(this, buf, offs, mtd->writesize, td);
598                         if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
599                                 td->pages[i] = actblock << blocktopage;
600                                 if (td->options & NAND_BBT_VERSION) {
601                                         offs = bbt_get_ver_offs(this, td);
602                                         td->version[i] = buf[offs];
603                                 }
604                                 break;
605                         }
606                 }
607                 startblock += targetsize >> this->bbt_erase_shift;
608         }
609         /* Check, if we found a bbt for each requested chip */
610         for (i = 0; i < chips; i++) {
611                 if (td->pages[i] == -1)
612                         pr_warn("Bad block table not found for chip %d\n", i);
613                 else
614                         pr_info("Bad block table found at page %d, version 0x%02X\n",
615                                 td->pages[i], td->version[i]);
616         }
617         return 0;
618 }
619
620 /**
621  * search_read_bbts - [GENERIC] scan the device for bad block table(s)
622  * @this: NAND chip object
623  * @buf: temporary buffer
624  * @td: descriptor for the bad block table
625  * @md: descriptor for the bad block table mirror
626  *
627  * Search and read the bad block table(s).
628  */
629 static void search_read_bbts(struct nand_chip *this, uint8_t *buf,
630                              struct nand_bbt_descr *td,
631                              struct nand_bbt_descr *md)
632 {
633         /* Search the primary table */
634         search_bbt(this, buf, td);
635
636         /* Search the mirror table */
637         if (md)
638                 search_bbt(this, buf, md);
639 }
640
641 /**
642  * get_bbt_block - Get the first valid eraseblock suitable to store a BBT
643  * @this: the NAND device
644  * @td: the BBT description
645  * @md: the mirror BBT descriptor
646  * @chip: the CHIP selector
647  *
648  * This functions returns a positive block number pointing a valid eraseblock
649  * suitable to store a BBT (i.e. in the range reserved for BBT), or -ENOSPC if
650  * all blocks are already used of marked bad. If td->pages[chip] was already
651  * pointing to a valid block we re-use it, otherwise we search for the next
652  * valid one.
653  */
654 static int get_bbt_block(struct nand_chip *this, struct nand_bbt_descr *td,
655                          struct nand_bbt_descr *md, int chip)
656 {
657         u64 targetsize = nanddev_target_size(&this->base);
658         int startblock, dir, page, numblocks, i;
659
660         /*
661          * There was already a version of the table, reuse the page. This
662          * applies for absolute placement too, as we have the page number in
663          * td->pages.
664          */
665         if (td->pages[chip] != -1)
666                 return td->pages[chip] >>
667                                 (this->bbt_erase_shift - this->page_shift);
668
669         numblocks = (int)(targetsize >> this->bbt_erase_shift);
670         if (!(td->options & NAND_BBT_PERCHIP))
671                 numblocks *= nanddev_ntargets(&this->base);
672
673         /*
674          * Automatic placement of the bad block table. Search direction
675          * top -> down?
676          */
677         if (td->options & NAND_BBT_LASTBLOCK) {
678                 startblock = numblocks * (chip + 1) - 1;
679                 dir = -1;
680         } else {
681                 startblock = chip * numblocks;
682                 dir = 1;
683         }
684
685         for (i = 0; i < td->maxblocks; i++) {
686                 int block = startblock + dir * i;
687
688                 /* Check, if the block is bad */
689                 switch (bbt_get_entry(this, block)) {
690                 case BBT_BLOCK_WORN:
691                 case BBT_BLOCK_FACTORY_BAD:
692                         continue;
693                 }
694
695                 page = block << (this->bbt_erase_shift - this->page_shift);
696
697                 /* Check, if the block is used by the mirror table */
698                 if (!md || md->pages[chip] != page)
699                         return block;
700         }
701
702         return -ENOSPC;
703 }
704
705 /**
706  * mark_bbt_block_bad - Mark one of the block reserved for BBT bad
707  * @this: the NAND device
708  * @td: the BBT description
709  * @chip: the CHIP selector
710  * @block: the BBT block to mark
711  *
712  * Blocks reserved for BBT can become bad. This functions is an helper to mark
713  * such blocks as bad. It takes care of updating the in-memory BBT, marking the
714  * block as bad using a bad block marker and invalidating the associated
715  * td->pages[] entry.
716  */
717 static void mark_bbt_block_bad(struct nand_chip *this,
718                                struct nand_bbt_descr *td,
719                                int chip, int block)
720 {
721         loff_t to;
722         int res;
723
724         bbt_mark_entry(this, block, BBT_BLOCK_WORN);
725
726         to = (loff_t)block << this->bbt_erase_shift;
727         res = nand_markbad_bbm(this, to);
728         if (res)
729                 pr_warn("nand_bbt: error %d while marking block %d bad\n",
730                         res, block);
731
732         td->pages[chip] = -1;
733 }
734
735 /**
736  * write_bbt - [GENERIC] (Re)write the bad block table
737  * @this: NAND chip object
738  * @buf: temporary buffer
739  * @td: descriptor for the bad block table
740  * @md: descriptor for the bad block table mirror
741  * @chipsel: selector for a specific chip, -1 for all
742  *
743  * (Re)write the bad block table.
744  */
745 static int write_bbt(struct nand_chip *this, uint8_t *buf,
746                      struct nand_bbt_descr *td, struct nand_bbt_descr *md,
747                      int chipsel)
748 {
749         u64 targetsize = nanddev_target_size(&this->base);
750         struct mtd_info *mtd = nand_to_mtd(this);
751         struct erase_info einfo;
752         int i, res, chip = 0;
753         int bits, page, offs, numblocks, sft, sftmsk;
754         int nrchips, pageoffs, ooboffs;
755         uint8_t msk[4];
756         uint8_t rcode = td->reserved_block_code;
757         size_t retlen, len = 0;
758         loff_t to;
759         struct mtd_oob_ops ops;
760
761         ops.ooblen = mtd->oobsize;
762         ops.ooboffs = 0;
763         ops.datbuf = NULL;
764         ops.mode = MTD_OPS_PLACE_OOB;
765
766         if (!rcode)
767                 rcode = 0xff;
768         /* Write bad block table per chip rather than per device? */
769         if (td->options & NAND_BBT_PERCHIP) {
770                 numblocks = (int)(targetsize >> this->bbt_erase_shift);
771                 /* Full device write or specific chip? */
772                 if (chipsel == -1) {
773                         nrchips = nanddev_ntargets(&this->base);
774                 } else {
775                         nrchips = chipsel + 1;
776                         chip = chipsel;
777                 }
778         } else {
779                 numblocks = (int)(mtd->size >> this->bbt_erase_shift);
780                 nrchips = 1;
781         }
782
783         /* Loop through the chips */
784         while (chip < nrchips) {
785                 int block;
786
787                 block = get_bbt_block(this, td, md, chip);
788                 if (block < 0) {
789                         pr_err("No space left to write bad block table\n");
790                         res = block;
791                         goto outerr;
792                 }
793
794                 /*
795                  * get_bbt_block() returns a block number, shift the value to
796                  * get a page number.
797                  */
798                 page = block << (this->bbt_erase_shift - this->page_shift);
799
800                 /* Set up shift count and masks for the flash table */
801                 bits = td->options & NAND_BBT_NRBITS_MSK;
802                 msk[2] = ~rcode;
803                 switch (bits) {
804                 case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
805                         msk[3] = 0x01;
806                         break;
807                 case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
808                         msk[3] = 0x03;
809                         break;
810                 case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
811                         msk[3] = 0x0f;
812                         break;
813                 case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
814                         msk[3] = 0xff;
815                         break;
816                 default: return -EINVAL;
817                 }
818
819                 to = ((loff_t)page) << this->page_shift;
820
821                 /* Must we save the block contents? */
822                 if (td->options & NAND_BBT_SAVECONTENT) {
823                         /* Make it block aligned */
824                         to &= ~(((loff_t)1 << this->bbt_erase_shift) - 1);
825                         len = 1 << this->bbt_erase_shift;
826                         res = mtd_read(mtd, to, len, &retlen, buf);
827                         if (res < 0) {
828                                 if (retlen != len) {
829                                         pr_info("nand_bbt: error reading block for writing the bad block table\n");
830                                         return res;
831                                 }
832                                 pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
833                         }
834                         /* Read oob data */
835                         ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
836                         ops.oobbuf = &buf[len];
837                         res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
838                         if (res < 0 || ops.oobretlen != ops.ooblen)
839                                 goto outerr;
840
841                         /* Calc the byte offset in the buffer */
842                         pageoffs = page - (int)(to >> this->page_shift);
843                         offs = pageoffs << this->page_shift;
844                         /* Preset the bbt area with 0xff */
845                         memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
846                         ooboffs = len + (pageoffs * mtd->oobsize);
847
848                 } else if (td->options & NAND_BBT_NO_OOB) {
849                         ooboffs = 0;
850                         offs = td->len;
851                         /* The version byte */
852                         if (td->options & NAND_BBT_VERSION)
853                                 offs++;
854                         /* Calc length */
855                         len = (size_t)(numblocks >> sft);
856                         len += offs;
857                         /* Make it page aligned! */
858                         len = ALIGN(len, mtd->writesize);
859                         /* Preset the buffer with 0xff */
860                         memset(buf, 0xff, len);
861                         /* Pattern is located at the begin of first page */
862                         memcpy(buf, td->pattern, td->len);
863                 } else {
864                         /* Calc length */
865                         len = (size_t)(numblocks >> sft);
866                         /* Make it page aligned! */
867                         len = ALIGN(len, mtd->writesize);
868                         /* Preset the buffer with 0xff */
869                         memset(buf, 0xff, len +
870                                (len >> this->page_shift)* mtd->oobsize);
871                         offs = 0;
872                         ooboffs = len;
873                         /* Pattern is located in oob area of first page */
874                         memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
875                 }
876
877                 if (td->options & NAND_BBT_VERSION)
878                         buf[ooboffs + td->veroffs] = td->version[chip];
879
880                 /* Walk through the memory table */
881                 for (i = 0; i < numblocks; i++) {
882                         uint8_t dat;
883                         int sftcnt = (i << (3 - sft)) & sftmsk;
884                         dat = bbt_get_entry(this, chip * numblocks + i);
885                         /* Do not store the reserved bbt blocks! */
886                         buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
887                 }
888
889                 memset(&einfo, 0, sizeof(einfo));
890                 einfo.addr = to;
891                 einfo.len = 1 << this->bbt_erase_shift;
892                 res = nand_erase_nand(this, &einfo, 1);
893                 if (res < 0) {
894                         pr_warn("nand_bbt: error while erasing BBT block %d\n",
895                                 res);
896                         mark_bbt_block_bad(this, td, chip, block);
897                         continue;
898                 }
899
900                 res = scan_write_bbt(this, to, len, buf,
901                                      td->options & NAND_BBT_NO_OOB ?
902                                      NULL : &buf[len]);
903                 if (res < 0) {
904                         pr_warn("nand_bbt: error while writing BBT block %d\n",
905                                 res);
906                         mark_bbt_block_bad(this, td, chip, block);
907                         continue;
908                 }
909
910                 pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
911                          (unsigned long long)to, td->version[chip]);
912
913                 /* Mark it as used */
914                 td->pages[chip++] = page;
915         }
916         return 0;
917
918  outerr:
919         pr_warn("nand_bbt: error while writing bad block table %d\n", res);
920         return res;
921 }
922
923 /**
924  * nand_memory_bbt - [GENERIC] create a memory based bad block table
925  * @this: NAND chip object
926  * @bd: descriptor for the good/bad block search pattern
927  *
928  * The function creates a memory based bbt by scanning the device for
929  * manufacturer / software marked good / bad blocks.
930  */
931 static inline int nand_memory_bbt(struct nand_chip *this,
932                                   struct nand_bbt_descr *bd)
933 {
934         u8 *pagebuf = nand_get_data_buf(this);
935
936         return create_bbt(this, pagebuf, bd, -1);
937 }
938
939 /**
940  * check_create - [GENERIC] create and write bbt(s) if necessary
941  * @this: the NAND device
942  * @buf: temporary buffer
943  * @bd: descriptor for the good/bad block search pattern
944  *
945  * The function checks the results of the previous call to read_bbt and creates
946  * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
947  * for the chip/device. Update is necessary if one of the tables is missing or
948  * the version nr. of one table is less than the other.
949  */
950 static int check_create(struct nand_chip *this, uint8_t *buf,
951                         struct nand_bbt_descr *bd)
952 {
953         int i, chips, writeops, create, chipsel, res, res2;
954         struct nand_bbt_descr *td = this->bbt_td;
955         struct nand_bbt_descr *md = this->bbt_md;
956         struct nand_bbt_descr *rd, *rd2;
957
958         /* Do we have a bbt per chip? */
959         if (td->options & NAND_BBT_PERCHIP)
960                 chips = nanddev_ntargets(&this->base);
961         else
962                 chips = 1;
963
964         for (i = 0; i < chips; i++) {
965                 writeops = 0;
966                 create = 0;
967                 rd = NULL;
968                 rd2 = NULL;
969                 res = res2 = 0;
970                 /* Per chip or per device? */
971                 chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
972                 /* Mirrored table available? */
973                 if (md) {
974                         if (td->pages[i] == -1 && md->pages[i] == -1) {
975                                 create = 1;
976                                 writeops = 0x03;
977                         } else if (td->pages[i] == -1) {
978                                 rd = md;
979                                 writeops = 0x01;
980                         } else if (md->pages[i] == -1) {
981                                 rd = td;
982                                 writeops = 0x02;
983                         } else if (td->version[i] == md->version[i]) {
984                                 rd = td;
985                                 if (!(td->options & NAND_BBT_VERSION))
986                                         rd2 = md;
987                         } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
988                                 rd = td;
989                                 writeops = 0x02;
990                         } else {
991                                 rd = md;
992                                 writeops = 0x01;
993                         }
994                 } else {
995                         if (td->pages[i] == -1) {
996                                 create = 1;
997                                 writeops = 0x01;
998                         } else {
999                                 rd = td;
1000                         }
1001                 }
1002
1003                 if (create) {
1004                         /* Create the bad block table by scanning the device? */
1005                         if (!(td->options & NAND_BBT_CREATE))
1006                                 continue;
1007
1008                         /* Create the table in memory by scanning the chip(s) */
1009                         if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
1010                                 create_bbt(this, buf, bd, chipsel);
1011
1012                         td->version[i] = 1;
1013                         if (md)
1014                                 md->version[i] = 1;
1015                 }
1016
1017                 /* Read back first? */
1018                 if (rd) {
1019                         res = read_abs_bbt(this, buf, rd, chipsel);
1020                         if (mtd_is_eccerr(res)) {
1021                                 /* Mark table as invalid */
1022                                 rd->pages[i] = -1;
1023                                 rd->version[i] = 0;
1024                                 i--;
1025                                 continue;
1026                         }
1027                 }
1028                 /* If they weren't versioned, read both */
1029                 if (rd2) {
1030                         res2 = read_abs_bbt(this, buf, rd2, chipsel);
1031                         if (mtd_is_eccerr(res2)) {
1032                                 /* Mark table as invalid */
1033                                 rd2->pages[i] = -1;
1034                                 rd2->version[i] = 0;
1035                                 i--;
1036                                 continue;
1037                         }
1038                 }
1039
1040                 /* Scrub the flash table(s)? */
1041                 if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
1042                         writeops = 0x03;
1043
1044                 /* Update version numbers before writing */
1045                 if (md) {
1046                         td->version[i] = max(td->version[i], md->version[i]);
1047                         md->version[i] = td->version[i];
1048                 }
1049
1050                 /* Write the bad block table to the device? */
1051                 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
1052                         res = write_bbt(this, buf, td, md, chipsel);
1053                         if (res < 0)
1054                                 return res;
1055                 }
1056
1057                 /* Write the mirror bad block table to the device? */
1058                 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
1059                         res = write_bbt(this, buf, md, td, chipsel);
1060                         if (res < 0)
1061                                 return res;
1062                 }
1063         }
1064         return 0;
1065 }
1066
1067 /**
1068  * nand_update_bbt - update bad block table(s)
1069  * @this: the NAND device
1070  * @offs: the offset of the newly marked block
1071  *
1072  * The function updates the bad block table(s).
1073  */
1074 static int nand_update_bbt(struct nand_chip *this, loff_t offs)
1075 {
1076         struct mtd_info *mtd = nand_to_mtd(this);
1077         int len, res = 0;
1078         int chip, chipsel;
1079         uint8_t *buf;
1080         struct nand_bbt_descr *td = this->bbt_td;
1081         struct nand_bbt_descr *md = this->bbt_md;
1082
1083         if (!this->bbt || !td)
1084                 return -EINVAL;
1085
1086         /* Allocate a temporary buffer for one eraseblock incl. oob */
1087         len = (1 << this->bbt_erase_shift);
1088         len += (len >> this->page_shift) * mtd->oobsize;
1089         buf = kmalloc(len, GFP_KERNEL);
1090         if (!buf)
1091                 return -ENOMEM;
1092
1093         /* Do we have a bbt per chip? */
1094         if (td->options & NAND_BBT_PERCHIP) {
1095                 chip = (int)(offs >> this->chip_shift);
1096                 chipsel = chip;
1097         } else {
1098                 chip = 0;
1099                 chipsel = -1;
1100         }
1101
1102         td->version[chip]++;
1103         if (md)
1104                 md->version[chip]++;
1105
1106         /* Write the bad block table to the device? */
1107         if (td->options & NAND_BBT_WRITE) {
1108                 res = write_bbt(this, buf, td, md, chipsel);
1109                 if (res < 0)
1110                         goto out;
1111         }
1112         /* Write the mirror bad block table to the device? */
1113         if (md && (md->options & NAND_BBT_WRITE)) {
1114                 res = write_bbt(this, buf, md, td, chipsel);
1115         }
1116
1117  out:
1118         kfree(buf);
1119         return res;
1120 }
1121
1122 /**
1123  * mark_bbt_region - [GENERIC] mark the bad block table regions
1124  * @this: the NAND device
1125  * @td: bad block table descriptor
1126  *
1127  * The bad block table regions are marked as "bad" to prevent accidental
1128  * erasures / writes. The regions are identified by the mark 0x02.
1129  */
1130 static void mark_bbt_region(struct nand_chip *this, struct nand_bbt_descr *td)
1131 {
1132         u64 targetsize = nanddev_target_size(&this->base);
1133         struct mtd_info *mtd = nand_to_mtd(this);
1134         int i, j, chips, block, nrblocks, update;
1135         uint8_t oldval;
1136
1137         /* Do we have a bbt per chip? */
1138         if (td->options & NAND_BBT_PERCHIP) {
1139                 chips = nanddev_ntargets(&this->base);
1140                 nrblocks = (int)(targetsize >> this->bbt_erase_shift);
1141         } else {
1142                 chips = 1;
1143                 nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
1144         }
1145
1146         for (i = 0; i < chips; i++) {
1147                 if ((td->options & NAND_BBT_ABSPAGE) ||
1148                     !(td->options & NAND_BBT_WRITE)) {
1149                         if (td->pages[i] == -1)
1150                                 continue;
1151                         block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
1152                         oldval = bbt_get_entry(this, block);
1153                         bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1154                         if ((oldval != BBT_BLOCK_RESERVED) &&
1155                                         td->reserved_block_code)
1156                                 nand_update_bbt(this, (loff_t)block <<
1157                                                 this->bbt_erase_shift);
1158                         continue;
1159                 }
1160                 update = 0;
1161                 if (td->options & NAND_BBT_LASTBLOCK)
1162                         block = ((i + 1) * nrblocks) - td->maxblocks;
1163                 else
1164                         block = i * nrblocks;
1165                 for (j = 0; j < td->maxblocks; j++) {
1166                         oldval = bbt_get_entry(this, block);
1167                         bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1168                         if (oldval != BBT_BLOCK_RESERVED)
1169                                 update = 1;
1170                         block++;
1171                 }
1172                 /*
1173                  * If we want reserved blocks to be recorded to flash, and some
1174                  * new ones have been marked, then we need to update the stored
1175                  * bbts.  This should only happen once.
1176                  */
1177                 if (update && td->reserved_block_code)
1178                         nand_update_bbt(this, (loff_t)(block - 1) <<
1179                                         this->bbt_erase_shift);
1180         }
1181 }
1182
1183 /**
1184  * verify_bbt_descr - verify the bad block description
1185  * @this: the NAND device
1186  * @bd: the table to verify
1187  *
1188  * This functions performs a few sanity checks on the bad block description
1189  * table.
1190  */
1191 static void verify_bbt_descr(struct nand_chip *this, struct nand_bbt_descr *bd)
1192 {
1193         u64 targetsize = nanddev_target_size(&this->base);
1194         struct mtd_info *mtd = nand_to_mtd(this);
1195         u32 pattern_len;
1196         u32 bits;
1197         u32 table_size;
1198
1199         if (!bd)
1200                 return;
1201
1202         pattern_len = bd->len;
1203         bits = bd->options & NAND_BBT_NRBITS_MSK;
1204
1205         BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
1206                         !(this->bbt_options & NAND_BBT_USE_FLASH));
1207         BUG_ON(!bits);
1208
1209         if (bd->options & NAND_BBT_VERSION)
1210                 pattern_len++;
1211
1212         if (bd->options & NAND_BBT_NO_OOB) {
1213                 BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
1214                 BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
1215                 BUG_ON(bd->offs);
1216                 if (bd->options & NAND_BBT_VERSION)
1217                         BUG_ON(bd->veroffs != bd->len);
1218                 BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
1219         }
1220
1221         if (bd->options & NAND_BBT_PERCHIP)
1222                 table_size = targetsize >> this->bbt_erase_shift;
1223         else
1224                 table_size = mtd->size >> this->bbt_erase_shift;
1225         table_size >>= 3;
1226         table_size *= bits;
1227         if (bd->options & NAND_BBT_NO_OOB)
1228                 table_size += pattern_len;
1229         BUG_ON(table_size > (1 << this->bbt_erase_shift));
1230 }
1231
1232 /**
1233  * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
1234  * @this: the NAND device
1235  * @bd: descriptor for the good/bad block search pattern
1236  *
1237  * The function checks, if a bad block table(s) is/are already available. If
1238  * not it scans the device for manufacturer marked good / bad blocks and writes
1239  * the bad block table(s) to the selected place.
1240  *
1241  * The bad block table memory is allocated here. It must be freed by calling
1242  * the nand_free_bbt function.
1243  */
1244 static int nand_scan_bbt(struct nand_chip *this, struct nand_bbt_descr *bd)
1245 {
1246         struct mtd_info *mtd = nand_to_mtd(this);
1247         int len, res;
1248         uint8_t *buf;
1249         struct nand_bbt_descr *td = this->bbt_td;
1250         struct nand_bbt_descr *md = this->bbt_md;
1251
1252         len = (mtd->size >> (this->bbt_erase_shift + 2)) ? : 1;
1253         /*
1254          * Allocate memory (2bit per block) and clear the memory bad block
1255          * table.
1256          */
1257         this->bbt = kzalloc(len, GFP_KERNEL);
1258         if (!this->bbt)
1259                 return -ENOMEM;
1260
1261         /*
1262          * If no primary table descriptor is given, scan the device to build a
1263          * memory based bad block table.
1264          */
1265         if (!td) {
1266                 if ((res = nand_memory_bbt(this, bd))) {
1267                         pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
1268                         goto err_free_bbt;
1269                 }
1270                 return 0;
1271         }
1272         verify_bbt_descr(this, td);
1273         verify_bbt_descr(this, md);
1274
1275         /* Allocate a temporary buffer for one eraseblock incl. oob */
1276         len = (1 << this->bbt_erase_shift);
1277         len += (len >> this->page_shift) * mtd->oobsize;
1278         buf = vmalloc(len);
1279         if (!buf) {
1280                 res = -ENOMEM;
1281                 goto err_free_bbt;
1282         }
1283
1284         /* Is the bbt at a given page? */
1285         if (td->options & NAND_BBT_ABSPAGE) {
1286                 read_abs_bbts(this, buf, td, md);
1287         } else {
1288                 /* Search the bad block table using a pattern in oob */
1289                 search_read_bbts(this, buf, td, md);
1290         }
1291
1292         res = check_create(this, buf, bd);
1293         if (res)
1294                 goto err_free_buf;
1295
1296         /* Prevent the bbt regions from erasing / writing */
1297         mark_bbt_region(this, td);
1298         if (md)
1299                 mark_bbt_region(this, md);
1300
1301         vfree(buf);
1302         return 0;
1303
1304 err_free_buf:
1305         vfree(buf);
1306 err_free_bbt:
1307         kfree(this->bbt);
1308         this->bbt = NULL;
1309         return res;
1310 }
1311
1312 /*
1313  * Define some generic bad / good block scan pattern which are used
1314  * while scanning a device for factory marked good / bad blocks.
1315  */
1316 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1317
1318 /* Generic flash bbt descriptors */
1319 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1320 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1321
1322 static struct nand_bbt_descr bbt_main_descr = {
1323         .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1324                 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1325         .offs = 8,
1326         .len = 4,
1327         .veroffs = 12,
1328         .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1329         .pattern = bbt_pattern
1330 };
1331
1332 static struct nand_bbt_descr bbt_mirror_descr = {
1333         .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1334                 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1335         .offs = 8,
1336         .len = 4,
1337         .veroffs = 12,
1338         .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1339         .pattern = mirror_pattern
1340 };
1341
1342 static struct nand_bbt_descr bbt_main_no_oob_descr = {
1343         .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1344                 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1345                 | NAND_BBT_NO_OOB,
1346         .len = 4,
1347         .veroffs = 4,
1348         .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1349         .pattern = bbt_pattern
1350 };
1351
1352 static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
1353         .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1354                 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1355                 | NAND_BBT_NO_OOB,
1356         .len = 4,
1357         .veroffs = 4,
1358         .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1359         .pattern = mirror_pattern
1360 };
1361
1362 #define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
1363 /**
1364  * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
1365  * @this: NAND chip to create descriptor for
1366  *
1367  * This function allocates and initializes a nand_bbt_descr for BBM detection
1368  * based on the properties of @this. The new descriptor is stored in
1369  * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
1370  * passed to this function.
1371  */
1372 static int nand_create_badblock_pattern(struct nand_chip *this)
1373 {
1374         struct nand_bbt_descr *bd;
1375         if (this->badblock_pattern) {
1376                 pr_warn("Bad block pattern already allocated; not replacing\n");
1377                 return -EINVAL;
1378         }
1379         bd = kzalloc(sizeof(*bd), GFP_KERNEL);
1380         if (!bd)
1381                 return -ENOMEM;
1382         bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
1383         bd->offs = this->badblockpos;
1384         bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
1385         bd->pattern = scan_ff_pattern;
1386         bd->options |= NAND_BBT_DYNAMICSTRUCT;
1387         this->badblock_pattern = bd;
1388         return 0;
1389 }
1390
1391 /**
1392  * nand_create_bbt - [NAND Interface] Select a default bad block table for the device
1393  * @this: NAND chip object
1394  *
1395  * This function selects the default bad block table support for the device and
1396  * calls the nand_scan_bbt function.
1397  */
1398 int nand_create_bbt(struct nand_chip *this)
1399 {
1400         int ret;
1401
1402         /* Is a flash based bad block table requested? */
1403         if (this->bbt_options & NAND_BBT_USE_FLASH) {
1404                 /* Use the default pattern descriptors */
1405                 if (!this->bbt_td) {
1406                         if (this->bbt_options & NAND_BBT_NO_OOB) {
1407                                 this->bbt_td = &bbt_main_no_oob_descr;
1408                                 this->bbt_md = &bbt_mirror_no_oob_descr;
1409                         } else {
1410                                 this->bbt_td = &bbt_main_descr;
1411                                 this->bbt_md = &bbt_mirror_descr;
1412                         }
1413                 }
1414         } else {
1415                 this->bbt_td = NULL;
1416                 this->bbt_md = NULL;
1417         }
1418
1419         if (!this->badblock_pattern) {
1420                 ret = nand_create_badblock_pattern(this);
1421                 if (ret)
1422                         return ret;
1423         }
1424
1425         return nand_scan_bbt(this, this->badblock_pattern);
1426 }
1427 EXPORT_SYMBOL(nand_create_bbt);
1428
1429 /**
1430  * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
1431  * @this: NAND chip object
1432  * @offs: offset in the device
1433  */
1434 int nand_isreserved_bbt(struct nand_chip *this, loff_t offs)
1435 {
1436         int block;
1437
1438         block = (int)(offs >> this->bbt_erase_shift);
1439         return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
1440 }
1441
1442 /**
1443  * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1444  * @this: NAND chip object
1445  * @offs: offset in the device
1446  * @allowbbt: allow access to bad block table region
1447  */
1448 int nand_isbad_bbt(struct nand_chip *this, loff_t offs, int allowbbt)
1449 {
1450         int block, res;
1451
1452         block = (int)(offs >> this->bbt_erase_shift);
1453         res = bbt_get_entry(this, block);
1454
1455         pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
1456                  (unsigned int)offs, block, res);
1457
1458         switch (res) {
1459         case BBT_BLOCK_GOOD:
1460                 return 0;
1461         case BBT_BLOCK_WORN:
1462                 return 1;
1463         case BBT_BLOCK_RESERVED:
1464                 return allowbbt ? 0 : 1;
1465         }
1466         return 1;
1467 }
1468
1469 /**
1470  * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
1471  * @this: NAND chip object
1472  * @offs: offset of the bad block
1473  */
1474 int nand_markbad_bbt(struct nand_chip *this, loff_t offs)
1475 {
1476         int block, ret = 0;
1477
1478         block = (int)(offs >> this->bbt_erase_shift);
1479
1480         /* Mark bad block in memory */
1481         bbt_mark_entry(this, block, BBT_BLOCK_WORN);
1482
1483         /* Update flash-based bad block table */
1484         if (this->bbt_options & NAND_BBT_USE_FLASH)
1485                 ret = nand_update_bbt(this, offs);
1486
1487         return ret;
1488 }