usb: dwc3: dwc3-qcom: Fix typo in the dwc3 vbus override API
[linux-2.6-microblaze.git] / drivers / mtd / chips / cfi_util.c
1 /*
2  * Common Flash Interface support:
3  *   Generic utility functions not dependent on command set
4  *
5  * Copyright (C) 2002 Red Hat
6  * Copyright (C) 2003 STMicroelectronics Limited
7  *
8  * This code is covered by the GPL.
9  */
10
11 #include <linux/module.h>
12 #include <linux/types.h>
13 #include <linux/kernel.h>
14 #include <asm/io.h>
15 #include <asm/byteorder.h>
16
17 #include <linux/errno.h>
18 #include <linux/slab.h>
19 #include <linux/delay.h>
20 #include <linux/interrupt.h>
21 #include <linux/mtd/xip.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/map.h>
24 #include <linux/mtd/cfi.h>
25
26 void cfi_udelay(int us)
27 {
28         if (us >= 1000) {
29                 msleep(DIV_ROUND_UP(us, 1000));
30         } else {
31                 udelay(us);
32                 cond_resched();
33         }
34 }
35 EXPORT_SYMBOL(cfi_udelay);
36
37 /*
38  * Returns the command address according to the given geometry.
39  */
40 uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs,
41                                 struct map_info *map, struct cfi_private *cfi)
42 {
43         unsigned bankwidth = map_bankwidth(map);
44         unsigned interleave = cfi_interleave(cfi);
45         unsigned type = cfi->device_type;
46         uint32_t addr;
47
48         addr = (cmd_ofs * type) * interleave;
49
50         /* Modify the unlock address if we are in compatibility mode.
51          * For 16bit devices on 8 bit busses
52          * and 32bit devices on 16 bit busses
53          * set the low bit of the alternating bit sequence of the address.
54          */
55         if (((type * interleave) > bankwidth) && ((cmd_ofs & 0xff) == 0xaa))
56                 addr |= (type >> 1)*interleave;
57
58         return  addr;
59 }
60 EXPORT_SYMBOL(cfi_build_cmd_addr);
61
62 /*
63  * Transforms the CFI command for the given geometry (bus width & interleave).
64  * It looks too long to be inline, but in the common case it should almost all
65  * get optimised away.
66  */
67 map_word cfi_build_cmd(u_long cmd, struct map_info *map, struct cfi_private *cfi)
68 {
69         map_word val = { {0} };
70         int wordwidth, words_per_bus, chip_mode, chips_per_word;
71         unsigned long onecmd;
72         int i;
73
74         /* We do it this way to give the compiler a fighting chance
75            of optimising away all the crap for 'bankwidth' larger than
76            an unsigned long, in the common case where that support is
77            disabled */
78         if (map_bankwidth_is_large(map)) {
79                 wordwidth = sizeof(unsigned long);
80                 words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
81         } else {
82                 wordwidth = map_bankwidth(map);
83                 words_per_bus = 1;
84         }
85
86         chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
87         chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
88
89         /* First, determine what the bit-pattern should be for a single
90            device, according to chip mode and endianness... */
91         switch (chip_mode) {
92         default: BUG();
93         case 1:
94                 onecmd = cmd;
95                 break;
96         case 2:
97                 onecmd = cpu_to_cfi16(map, cmd);
98                 break;
99         case 4:
100                 onecmd = cpu_to_cfi32(map, cmd);
101                 break;
102         }
103
104         /* Now replicate it across the size of an unsigned long, or
105            just to the bus width as appropriate */
106         switch (chips_per_word) {
107         default: BUG();
108 #if BITS_PER_LONG >= 64
109         case 8:
110                 onecmd |= (onecmd << (chip_mode * 32));
111 #endif
112                 fallthrough;
113         case 4:
114                 onecmd |= (onecmd << (chip_mode * 16));
115                 fallthrough;
116         case 2:
117                 onecmd |= (onecmd << (chip_mode * 8));
118                 fallthrough;
119         case 1:
120                 ;
121         }
122
123         /* And finally, for the multi-word case, replicate it
124            in all words in the structure */
125         for (i=0; i < words_per_bus; i++) {
126                 val.x[i] = onecmd;
127         }
128
129         return val;
130 }
131 EXPORT_SYMBOL(cfi_build_cmd);
132
133 unsigned long cfi_merge_status(map_word val, struct map_info *map,
134                                            struct cfi_private *cfi)
135 {
136         int wordwidth, words_per_bus, chip_mode, chips_per_word;
137         unsigned long onestat, res = 0;
138         int i;
139
140         /* We do it this way to give the compiler a fighting chance
141            of optimising away all the crap for 'bankwidth' larger than
142            an unsigned long, in the common case where that support is
143            disabled */
144         if (map_bankwidth_is_large(map)) {
145                 wordwidth = sizeof(unsigned long);
146                 words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1
147         } else {
148                 wordwidth = map_bankwidth(map);
149                 words_per_bus = 1;
150         }
151
152         chip_mode = map_bankwidth(map) / cfi_interleave(cfi);
153         chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map);
154
155         onestat = val.x[0];
156         /* Or all status words together */
157         for (i=1; i < words_per_bus; i++) {
158                 onestat |= val.x[i];
159         }
160
161         res = onestat;
162         switch(chips_per_word) {
163         default: BUG();
164 #if BITS_PER_LONG >= 64
165         case 8:
166                 res |= (onestat >> (chip_mode * 32));
167 #endif
168                 fallthrough;
169         case 4:
170                 res |= (onestat >> (chip_mode * 16));
171                 fallthrough;
172         case 2:
173                 res |= (onestat >> (chip_mode * 8));
174                 fallthrough;
175         case 1:
176                 ;
177         }
178
179         /* Last, determine what the bit-pattern should be for a single
180            device, according to chip mode and endianness... */
181         switch (chip_mode) {
182         case 1:
183                 break;
184         case 2:
185                 res = cfi16_to_cpu(map, res);
186                 break;
187         case 4:
188                 res = cfi32_to_cpu(map, res);
189                 break;
190         default: BUG();
191         }
192         return res;
193 }
194 EXPORT_SYMBOL(cfi_merge_status);
195
196 /*
197  * Sends a CFI command to a bank of flash for the given geometry.
198  *
199  * Returns the offset in flash where the command was written.
200  * If prev_val is non-null, it will be set to the value at the command address,
201  * before the command was written.
202  */
203 uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base,
204                                 struct map_info *map, struct cfi_private *cfi,
205                                 int type, map_word *prev_val)
206 {
207         map_word val;
208         uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, map, cfi);
209         val = cfi_build_cmd(cmd, map, cfi);
210
211         if (prev_val)
212                 *prev_val = map_read(map, addr);
213
214         map_write(map, val, addr);
215
216         return addr - base;
217 }
218 EXPORT_SYMBOL(cfi_send_gen_cmd);
219
220 int __xipram cfi_qry_present(struct map_info *map, __u32 base,
221                              struct cfi_private *cfi)
222 {
223         int osf = cfi->interleave * cfi->device_type;   /* scale factor */
224         map_word val[3];
225         map_word qry[3];
226
227         qry[0] = cfi_build_cmd('Q', map, cfi);
228         qry[1] = cfi_build_cmd('R', map, cfi);
229         qry[2] = cfi_build_cmd('Y', map, cfi);
230
231         val[0] = map_read(map, base + osf*0x10);
232         val[1] = map_read(map, base + osf*0x11);
233         val[2] = map_read(map, base + osf*0x12);
234
235         if (!map_word_equal(map, qry[0], val[0]))
236                 return 0;
237
238         if (!map_word_equal(map, qry[1], val[1]))
239                 return 0;
240
241         if (!map_word_equal(map, qry[2], val[2]))
242                 return 0;
243
244         return 1;       /* "QRY" found */
245 }
246 EXPORT_SYMBOL_GPL(cfi_qry_present);
247
248 int __xipram cfi_qry_mode_on(uint32_t base, struct map_info *map,
249                              struct cfi_private *cfi)
250 {
251         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
252         cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
253         if (cfi_qry_present(map, base, cfi))
254                 return 1;
255         /* QRY not found probably we deal with some odd CFI chips */
256         /* Some revisions of some old Intel chips? */
257         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
258         cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
259         cfi_send_gen_cmd(0x98, 0x55, base, map, cfi, cfi->device_type, NULL);
260         if (cfi_qry_present(map, base, cfi))
261                 return 1;
262         /* ST M29DW chips */
263         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
264         cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
265         if (cfi_qry_present(map, base, cfi))
266                 return 1;
267         /* some old SST chips, e.g. 39VF160x/39VF320x */
268         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
269         cfi_send_gen_cmd(0xAA, 0x5555, base, map, cfi, cfi->device_type, NULL);
270         cfi_send_gen_cmd(0x55, 0x2AAA, base, map, cfi, cfi->device_type, NULL);
271         cfi_send_gen_cmd(0x98, 0x5555, base, map, cfi, cfi->device_type, NULL);
272         if (cfi_qry_present(map, base, cfi))
273                 return 1;
274         /* SST 39VF640xB */
275         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
276         cfi_send_gen_cmd(0xAA, 0x555, base, map, cfi, cfi->device_type, NULL);
277         cfi_send_gen_cmd(0x55, 0x2AA, base, map, cfi, cfi->device_type, NULL);
278         cfi_send_gen_cmd(0x98, 0x555, base, map, cfi, cfi->device_type, NULL);
279         if (cfi_qry_present(map, base, cfi))
280                 return 1;
281         /* QRY not found */
282         return 0;
283 }
284 EXPORT_SYMBOL_GPL(cfi_qry_mode_on);
285
286 void __xipram cfi_qry_mode_off(uint32_t base, struct map_info *map,
287                                struct cfi_private *cfi)
288 {
289         cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
290         cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
291         /* M29W128G flashes require an additional reset command
292            when exit qry mode */
293         if ((cfi->mfr == CFI_MFR_ST) && (cfi->id == 0x227E || cfi->id == 0x7E))
294                 cfi_send_gen_cmd(0xF0, 0, base, map, cfi, cfi->device_type, NULL);
295 }
296 EXPORT_SYMBOL_GPL(cfi_qry_mode_off);
297
298 struct cfi_extquery *
299 __xipram cfi_read_pri(struct map_info *map, __u16 adr, __u16 size, const char* name)
300 {
301         struct cfi_private *cfi = map->fldrv_priv;
302         __u32 base = 0; // cfi->chips[0].start;
303         int ofs_factor = cfi->interleave * cfi->device_type;
304         int i;
305         struct cfi_extquery *extp = NULL;
306
307         if (!adr)
308                 goto out;
309
310         printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
311
312         extp = kmalloc(size, GFP_KERNEL);
313         if (!extp)
314                 goto out;
315
316 #ifdef CONFIG_MTD_XIP
317         local_irq_disable();
318 #endif
319
320         /* Switch it into Query Mode */
321         cfi_qry_mode_on(base, map, cfi);
322         /* Read in the Extended Query Table */
323         for (i=0; i<size; i++) {
324                 ((unsigned char *)extp)[i] =
325                         cfi_read_query(map, base+((adr+i)*ofs_factor));
326         }
327
328         /* Make sure it returns to read mode */
329         cfi_qry_mode_off(base, map, cfi);
330
331 #ifdef CONFIG_MTD_XIP
332         (void) map_read(map, base);
333         xip_iprefetch();
334         local_irq_enable();
335 #endif
336
337  out:   return extp;
338 }
339
340 EXPORT_SYMBOL(cfi_read_pri);
341
342 void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup *fixups)
343 {
344         struct map_info *map = mtd->priv;
345         struct cfi_private *cfi = map->fldrv_priv;
346         struct cfi_fixup *f;
347
348         for (f=fixups; f->fixup; f++) {
349                 if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi->mfr)) &&
350                     ((f->id  == CFI_ID_ANY)  || (f->id  == cfi->id))) {
351                         f->fixup(mtd);
352                 }
353         }
354 }
355
356 EXPORT_SYMBOL(cfi_fixup);
357
358 int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob,
359                                      loff_t ofs, size_t len, void *thunk)
360 {
361         struct map_info *map = mtd->priv;
362         struct cfi_private *cfi = map->fldrv_priv;
363         unsigned long adr;
364         int chipnum, ret = 0;
365         int i, first;
366         struct mtd_erase_region_info *regions = mtd->eraseregions;
367
368         /* Check that both start and end of the requested erase are
369          * aligned with the erasesize at the appropriate addresses.
370          */
371
372         i = 0;
373
374         /* Skip all erase regions which are ended before the start of
375            the requested erase. Actually, to save on the calculations,
376            we skip to the first erase region which starts after the
377            start of the requested erase, and then go back one.
378         */
379
380         while (i < mtd->numeraseregions && ofs >= regions[i].offset)
381                i++;
382         i--;
383
384         /* OK, now i is pointing at the erase region in which this
385            erase request starts. Check the start of the requested
386            erase range is aligned with the erase size which is in
387            effect here.
388         */
389
390         if (ofs & (regions[i].erasesize-1))
391                 return -EINVAL;
392
393         /* Remember the erase region we start on */
394         first = i;
395
396         /* Next, check that the end of the requested erase is aligned
397          * with the erase region at that address.
398          */
399
400         while (i<mtd->numeraseregions && (ofs + len) >= regions[i].offset)
401                 i++;
402
403         /* As before, drop back one to point at the region in which
404            the address actually falls
405         */
406         i--;
407
408         if ((ofs + len) & (regions[i].erasesize-1))
409                 return -EINVAL;
410
411         chipnum = ofs >> cfi->chipshift;
412         adr = ofs - (chipnum << cfi->chipshift);
413
414         i=first;
415
416         while(len) {
417                 int size = regions[i].erasesize;
418
419                 ret = (*frob)(map, &cfi->chips[chipnum], adr, size, thunk);
420
421                 if (ret)
422                         return ret;
423
424                 adr += size;
425                 ofs += size;
426                 len -= size;
427
428                 if (ofs == regions[i].offset + size * regions[i].numblocks)
429                         i++;
430
431                 if (adr >> cfi->chipshift) {
432                         adr = 0;
433                         chipnum++;
434
435                         if (chipnum >= cfi->numchips)
436                                 break;
437                 }
438         }
439
440         return 0;
441 }
442
443 EXPORT_SYMBOL(cfi_varsize_frob);
444
445 MODULE_LICENSE("GPL");