x86/sev-es: Do not support MMIO to/from encrypted memory
[linux-2.6-microblaze.git] / drivers / misc / mic / host / mic_device.h
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Intel MIC Platform Software Stack (MPSS)
4  *
5  * Copyright(c) 2013 Intel Corporation.
6  *
7  * Intel MIC Host driver.
8  */
9 #ifndef _MIC_DEVICE_H_
10 #define _MIC_DEVICE_H_
11
12 #include <linux/cdev.h>
13 #include <linux/idr.h>
14 #include <linux/notifier.h>
15 #include <linux/irqreturn.h>
16 #include <linux/dmaengine.h>
17 #include <linux/miscdevice.h>
18 #include <linux/mic_bus.h>
19 #include "../bus/scif_bus.h"
20 #include "../bus/vop_bus.h"
21 #include "../bus/cosm_bus.h"
22 #include "mic_intr.h"
23
24 /**
25  * enum mic_stepping - MIC stepping ids.
26  */
27 enum mic_stepping {
28         MIC_A0_STEP = 0x0,
29         MIC_B0_STEP = 0x10,
30         MIC_B1_STEP = 0x11,
31         MIC_C0_STEP = 0x20,
32 };
33
34 extern struct cosm_hw_ops cosm_hw_ops;
35
36 /**
37  * struct mic_device -  MIC device information for each card.
38  *
39  * @mmio: MMIO bar information.
40  * @aper: Aperture bar information.
41  * @family: The MIC family to which this device belongs.
42  * @ops: MIC HW specific operations.
43  * @id: The unique device id for this MIC device.
44  * @stepping: Stepping ID.
45  * @pdev: Underlying PCI device.
46  * @mic_mutex: Mutex for synchronizing access to mic_device.
47  * @intr_ops: HW specific interrupt operations.
48  * @smpt_ops: Hardware specific SMPT operations.
49  * @smpt: MIC SMPT information.
50  * @intr_info: H/W specific interrupt information.
51  * @irq_info: The OS specific irq information
52  * @dbg_dir: debugfs directory of this MIC device.
53  * @bootaddr: MIC boot address.
54  * @dp: virtio device page
55  * @dp_dma_addr: virtio device page DMA address.
56  * @dma_mbdev: MIC BUS DMA device.
57  * @dma_ch - Array of DMA channels
58  * @num_dma_ch - Number of DMA channels available
59  * @scdev: SCIF device on the SCIF virtual bus.
60  * @vpdev: Virtio over PCIe device on the VOP virtual bus.
61  * @cosm_dev: COSM device
62  */
63 struct mic_device {
64         struct mic_mw mmio;
65         struct mic_mw aper;
66         enum mic_hw_family family;
67         struct mic_hw_ops *ops;
68         int id;
69         enum mic_stepping stepping;
70         struct pci_dev *pdev;
71         struct mutex mic_mutex;
72         struct mic_hw_intr_ops *intr_ops;
73         struct mic_smpt_ops *smpt_ops;
74         struct mic_smpt_info *smpt;
75         struct mic_intr_info *intr_info;
76         struct mic_irq_info irq_info;
77         struct dentry *dbg_dir;
78         u32 bootaddr;
79         void *dp;
80         dma_addr_t dp_dma_addr;
81         struct mbus_device *dma_mbdev;
82         struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN];
83         int num_dma_ch;
84         struct scif_hw_dev *scdev;
85         struct vop_device *vpdev;
86         struct cosm_device *cosm_dev;
87 };
88
89 /**
90  * struct mic_hw_ops - MIC HW specific operations.
91  * @aper_bar: Aperture bar resource number.
92  * @mmio_bar: MMIO bar resource number.
93  * @read_spad: Read from scratch pad register.
94  * @write_spad: Write to scratch pad register.
95  * @send_intr: Send an interrupt for a particular doorbell on the card.
96  * @ack_interrupt: Hardware specific operations to ack the h/w on
97  * receipt of an interrupt.
98  * @intr_workarounds: Hardware specific workarounds needed after
99  * handling an interrupt.
100  * @reset: Reset the remote processor.
101  * @reset_fw_ready: Reset firmware ready field.
102  * @is_fw_ready: Check if firmware is ready for OS download.
103  * @send_firmware_intr: Send an interrupt to the card firmware.
104  * @load_mic_fw: Load firmware segments required to boot the card
105  * into card memory. This includes the kernel, command line, ramdisk etc.
106  * @get_postcode: Get post code status from firmware.
107  * @dma_filter: DMA filter function to be used.
108  */
109 struct mic_hw_ops {
110         u8 aper_bar;
111         u8 mmio_bar;
112         u32 (*read_spad)(struct mic_device *mdev, unsigned int idx);
113         void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val);
114         void (*send_intr)(struct mic_device *mdev, int doorbell);
115         u32 (*ack_interrupt)(struct mic_device *mdev);
116         void (*intr_workarounds)(struct mic_device *mdev);
117         void (*reset)(struct mic_device *mdev);
118         void (*reset_fw_ready)(struct mic_device *mdev);
119         bool (*is_fw_ready)(struct mic_device *mdev);
120         void (*send_firmware_intr)(struct mic_device *mdev);
121         int (*load_mic_fw)(struct mic_device *mdev, const char *buf);
122         u32 (*get_postcode)(struct mic_device *mdev);
123         bool (*dma_filter)(struct dma_chan *chan, void *param);
124 };
125
126 /**
127  * mic_mmio_read - read from an MMIO register.
128  * @mw: MMIO register base virtual address.
129  * @offset: register offset.
130  *
131  * RETURNS: register value.
132  */
133 static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset)
134 {
135         return ioread32(mw->va + offset);
136 }
137
138 /**
139  * mic_mmio_write - write to an MMIO register.
140  * @mw: MMIO register base virtual address.
141  * @val: the data value to put into the register
142  * @offset: register offset.
143  *
144  * RETURNS: none.
145  */
146 static inline void
147 mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset)
148 {
149         iowrite32(val, mw->va + offset);
150 }
151
152 void mic_bootparam_init(struct mic_device *mdev);
153 void mic_create_debug_dir(struct mic_device *dev);
154 void mic_delete_debug_dir(struct mic_device *dev);
155 void __init mic_init_debugfs(void);
156 void mic_exit_debugfs(void);
157 #endif