Merge tag 'fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner...
[linux-2.6-microblaze.git] / drivers / mfd / rn5t618.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * MFD core driver for Ricoh RN5T618 PMIC
4  *
5  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
6  * Copyright (C) 2016 Toradex AG
7  */
8
9 #include <linux/delay.h>
10 #include <linux/i2c.h>
11 #include <linux/interrupt.h>
12 #include <linux/irq.h>
13 #include <linux/mfd/core.h>
14 #include <linux/mfd/rn5t618.h>
15 #include <linux/module.h>
16 #include <linux/of_device.h>
17 #include <linux/platform_device.h>
18 #include <linux/reboot.h>
19 #include <linux/regmap.h>
20
21 static const struct mfd_cell rn5t618_cells[] = {
22         { .name = "rn5t618-regulator" },
23         { .name = "rn5t618-wdt" },
24 };
25
26 static const struct mfd_cell rc5t619_cells[] = {
27         { .name = "rn5t618-adc" },
28         { .name = "rn5t618-power" },
29         { .name = "rn5t618-regulator" },
30         { .name = "rc5t619-rtc" },
31         { .name = "rn5t618-wdt" },
32 };
33
34 static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
35 {
36         switch (reg) {
37         case RN5T618_WATCHDOGCNT:
38         case RN5T618_DCIRQ:
39         case RN5T618_ILIMDATAH ... RN5T618_AIN0DATAL:
40         case RN5T618_ADCCNT3:
41         case RN5T618_IR_ADC1 ... RN5T618_IR_ADC3:
42         case RN5T618_IR_GPR:
43         case RN5T618_IR_GPF:
44         case RN5T618_MON_IOIN:
45         case RN5T618_INTMON:
46         case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
47         case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
48         case RN5T618_CHGSTATE:
49         case RN5T618_CHGCTRL_IRR ... RN5T618_CHGERR_MONI:
50         case RN5T618_CONTROL ... RN5T618_CC_AVEREG0:
51                 return true;
52         default:
53                 return false;
54         }
55 }
56
57 static const struct regmap_config rn5t618_regmap_config = {
58         .reg_bits       = 8,
59         .val_bits       = 8,
60         .volatile_reg   = rn5t618_volatile_reg,
61         .max_register   = RN5T618_MAX_REG,
62         .cache_type     = REGCACHE_RBTREE,
63 };
64
65 static const struct regmap_irq rc5t619_irqs[] = {
66         REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
67         REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
68         REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
69         REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
70         REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
71         REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
72 };
73
74 static const struct regmap_irq_chip rc5t619_irq_chip = {
75         .name = "rc5t619",
76         .irqs = rc5t619_irqs,
77         .num_irqs = ARRAY_SIZE(rc5t619_irqs),
78         .num_regs = 1,
79         .status_base = RN5T618_INTMON,
80         .mask_base = RN5T618_INTEN,
81         .mask_invert = true,
82 };
83
84 static struct i2c_client *rn5t618_pm_power_off;
85 static struct notifier_block rn5t618_restart_handler;
86
87 static int rn5t618_irq_init(struct rn5t618 *rn5t618)
88 {
89         const struct regmap_irq_chip *irq_chip = NULL;
90         int ret;
91
92         if (!rn5t618->irq)
93                 return 0;
94
95         switch (rn5t618->variant) {
96         case RC5T619:
97                 irq_chip = &rc5t619_irq_chip;
98                 break;
99         default:
100                 dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
101                         (int)rn5t618->variant);
102                 return -ENOENT;
103         }
104
105         ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
106                                        rn5t618->irq,
107                                        IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
108                                        0, irq_chip, &rn5t618->irq_data);
109         if (ret)
110                 dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
111
112         return ret;
113 }
114
115 static void rn5t618_trigger_poweroff_sequence(bool repower)
116 {
117         int ret;
118
119         /* disable automatic repower-on */
120         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_REPCNT);
121         if (ret < 0)
122                 goto err;
123
124         ret &= ~RN5T618_REPCNT_REPWRON;
125         if (repower)
126                 ret |= RN5T618_REPCNT_REPWRON;
127
128         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
129                                         RN5T618_REPCNT, (u8)ret);
130         if (ret < 0)
131                 goto err;
132
133         /* start power-off sequence */
134         ret = i2c_smbus_read_byte_data(rn5t618_pm_power_off, RN5T618_SLPCNT);
135         if (ret < 0)
136                 goto err;
137
138         ret |= RN5T618_SLPCNT_SWPWROFF;
139
140         ret = i2c_smbus_write_byte_data(rn5t618_pm_power_off,
141                                         RN5T618_SLPCNT, (u8)ret);
142         if (ret < 0)
143                 goto err;
144
145         return;
146
147 err:
148         dev_alert(&rn5t618_pm_power_off->dev, "Failed to shutdown (err = %d)\n", ret);
149 }
150
151 static void rn5t618_power_off(void)
152 {
153         rn5t618_trigger_poweroff_sequence(false);
154 }
155
156 static int rn5t618_restart(struct notifier_block *this,
157                             unsigned long mode, void *cmd)
158 {
159         rn5t618_trigger_poweroff_sequence(true);
160
161         /*
162          * Re-power factor detection on PMIC side is not instant. 1ms
163          * proved to be enough time until reset takes effect.
164          */
165         mdelay(1);
166
167         return NOTIFY_DONE;
168 }
169
170 static const struct of_device_id rn5t618_of_match[] = {
171         { .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
172         { .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
173         { .compatible = "ricoh,rc5t619", .data = (void *)RC5T619 },
174         { }
175 };
176 MODULE_DEVICE_TABLE(of, rn5t618_of_match);
177
178 static int rn5t618_i2c_probe(struct i2c_client *i2c)
179 {
180         const struct of_device_id *of_id;
181         struct rn5t618 *priv;
182         int ret;
183
184         of_id = of_match_device(rn5t618_of_match, &i2c->dev);
185         if (!of_id) {
186                 dev_err(&i2c->dev, "Failed to find matching DT ID\n");
187                 return -EINVAL;
188         }
189
190         priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
191         if (!priv)
192                 return -ENOMEM;
193
194         i2c_set_clientdata(i2c, priv);
195         priv->variant = (long)of_id->data;
196         priv->irq = i2c->irq;
197         priv->dev = &i2c->dev;
198
199         priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
200         if (IS_ERR(priv->regmap)) {
201                 ret = PTR_ERR(priv->regmap);
202                 dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
203                 return ret;
204         }
205
206         if (priv->variant == RC5T619)
207                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
208                                            rc5t619_cells,
209                                            ARRAY_SIZE(rc5t619_cells),
210                                            NULL, 0, NULL);
211         else
212                 ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
213                                            rn5t618_cells,
214                                            ARRAY_SIZE(rn5t618_cells),
215                                            NULL, 0, NULL);
216         if (ret) {
217                 dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
218                 return ret;
219         }
220
221         rn5t618_pm_power_off = i2c;
222         if (of_device_is_system_power_controller(i2c->dev.of_node)) {
223                 if (!pm_power_off)
224                         pm_power_off = rn5t618_power_off;
225                 else
226                         dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
227         }
228
229         rn5t618_restart_handler.notifier_call = rn5t618_restart;
230         rn5t618_restart_handler.priority = 192;
231
232         ret = register_restart_handler(&rn5t618_restart_handler);
233         if (ret) {
234                 dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
235                 return ret;
236         }
237
238         return rn5t618_irq_init(priv);
239 }
240
241 static int rn5t618_i2c_remove(struct i2c_client *i2c)
242 {
243         if (i2c == rn5t618_pm_power_off) {
244                 rn5t618_pm_power_off = NULL;
245                 pm_power_off = NULL;
246         }
247
248         unregister_restart_handler(&rn5t618_restart_handler);
249
250         return 0;
251 }
252
253 static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
254 {
255         struct rn5t618 *priv = dev_get_drvdata(dev);
256
257         if (priv->irq)
258                 disable_irq(priv->irq);
259
260         return 0;
261 }
262
263 static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
264 {
265         struct rn5t618 *priv = dev_get_drvdata(dev);
266
267         if (priv->irq)
268                 enable_irq(priv->irq);
269
270         return 0;
271 }
272
273 static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
274                         rn5t618_i2c_suspend,
275                         rn5t618_i2c_resume);
276
277 static struct i2c_driver rn5t618_i2c_driver = {
278         .driver = {
279                 .name = "rn5t618",
280                 .of_match_table = of_match_ptr(rn5t618_of_match),
281                 .pm = &rn5t618_i2c_dev_pm_ops,
282         },
283         .probe_new = rn5t618_i2c_probe,
284         .remove = rn5t618_i2c_remove,
285 };
286
287 module_i2c_driver(rn5t618_i2c_driver);
288
289 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
290 MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
291 MODULE_LICENSE("GPL v2");