drivers/media/i2c/ks0127.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Video Capture Driver (Video for Linux 1/2)
   4  * for the Matrox Marvel G200,G400 and Rainbow Runner-G series
   5  *
   6  * This module is an interface to the KS0127 video decoder chip.
   7  *
   8  * Copyright (C) 1999  Ryan Drake <stiletto@mediaone.net>
   9  *
  10  *****************************************************************************
  11  *
  12  * Modified and extended by
  13  *      Mike Bernson <mike@mlb.org>
  14  *      Gerard v.d. Horst
  15  *      Leon van Stuivenberg <l.vanstuivenberg@chello.nl>
  16  *      Gernot Ziegler <gz@lysator.liu.se>
  17  *
  18  * Version History:
  19  * V1.0 Ryan Drake         Initial version by Ryan Drake
  20  * V1.1 Gerard v.d. Horst  Added some debugoutput, reset the video-standard
  21  */
  22
  23 #include <linux/init.h>
  24 #include <linux/module.h>
  25 #include <linux/delay.h>
  26 #include <linux/errno.h>
  27 #include <linux/kernel.h>
  28 #include <linux/i2c.h>
  29 #include <linux/videodev2.h>
  30 #include <linux/slab.h>
  31 #include <media/v4l2-device.h>
  32 #include "ks0127.h"
  33
  34 MODULE_DESCRIPTION("KS0127 video decoder driver");
  35 MODULE_AUTHOR("Ryan Drake");
  36 MODULE_LICENSE("GPL");
  37
  38 /* Addresses */
  39 #define I2C_KS0127_ADDON   0xD8
  40 #define I2C_KS0127_ONBOARD 0xDA
  41
  42
  43 /* ks0127 control registers */
  44 #define KS_STAT     0x00
  45 #define KS_CMDA     0x01
  46 #define KS_CMDB     0x02
  47 #define KS_CMDC     0x03
  48 #define KS_CMDD     0x04
  49 #define KS_HAVB     0x05
  50 #define KS_HAVE     0x06
  51 #define KS_HS1B     0x07
  52 #define KS_HS1E     0x08
  53 #define KS_HS2B     0x09
  54 #define KS_HS2E     0x0a
  55 #define KS_AGC      0x0b
  56 #define KS_HXTRA    0x0c
  57 #define KS_CDEM     0x0d
  58 #define KS_PORTAB   0x0e
  59 #define KS_LUMA     0x0f
  60 #define KS_CON      0x10
  61 #define KS_BRT      0x11
  62 #define KS_CHROMA   0x12
  63 #define KS_CHROMB   0x13
  64 #define KS_DEMOD    0x14
  65 #define KS_SAT      0x15
  66 #define KS_HUE      0x16
  67 #define KS_VERTIA   0x17
  68 #define KS_VERTIB   0x18
  69 #define KS_VERTIC   0x19
  70 #define KS_HSCLL    0x1a
  71 #define KS_HSCLH    0x1b
  72 #define KS_VSCLL    0x1c
  73 #define KS_VSCLH    0x1d
  74 #define KS_OFMTA    0x1e
  75 #define KS_OFMTB    0x1f
  76 #define KS_VBICTL   0x20
  77 #define KS_CCDAT2   0x21
  78 #define KS_CCDAT1   0x22
  79 #define KS_VBIL30   0x23
  80 #define KS_VBIL74   0x24
  81 #define KS_VBIL118  0x25
  82 #define KS_VBIL1512 0x26
  83 #define KS_TTFRAM   0x27
  84 #define KS_TESTA    0x28
  85 #define KS_UVOFFH   0x29
  86 #define KS_UVOFFL   0x2a
  87 #define KS_UGAIN    0x2b
  88 #define KS_VGAIN    0x2c
  89 #define KS_VAVB     0x2d
  90 #define KS_VAVE     0x2e
  91 #define KS_CTRACK   0x2f
  92 #define KS_POLCTL   0x30
  93 #define KS_REFCOD   0x31
  94 #define KS_INVALY   0x32
  95 #define KS_INVALU   0x33
  96 #define KS_INVALV   0x34
  97 #define KS_UNUSEY   0x35
  98 #define KS_UNUSEU   0x36
  99 #define KS_UNUSEV   0x37
 100 #define KS_USRSAV   0x38
 101 #define KS_USREAV   0x39
 102 #define KS_SHS1A    0x3a
 103 #define KS_SHS1B    0x3b
 104 #define KS_SHS1C    0x3c
 105 #define KS_CMDE     0x3d
 106 #define KS_VSDEL    0x3e
 107 #define KS_CMDF     0x3f
 108 #define KS_GAMMA0   0x40
 109 #define KS_GAMMA1   0x41
 110 #define KS_GAMMA2   0x42
 111 #define KS_GAMMA3   0x43
 112 #define KS_GAMMA4   0x44
 113 #define KS_GAMMA5   0x45
 114 #define KS_GAMMA6   0x46
 115 #define KS_GAMMA7   0x47
 116 #define KS_GAMMA8   0x48
 117 #define KS_GAMMA9   0x49
 118 #define KS_GAMMA10  0x4a
 119 #define KS_GAMMA11  0x4b
 120 #define KS_GAMMA12  0x4c
 121 #define KS_GAMMA13  0x4d
 122 #define KS_GAMMA14  0x4e
 123 #define KS_GAMMA15  0x4f
 124 #define KS_GAMMA16  0x50
 125 #define KS_GAMMA17  0x51
 126 #define KS_GAMMA18  0x52
 127 #define KS_GAMMA19  0x53
 128 #define KS_GAMMA20  0x54
 129 #define KS_GAMMA21  0x55
 130 #define KS_GAMMA22  0x56
 131 #define KS_GAMMA23  0x57
 132 #define KS_GAMMA24  0x58
 133 #define KS_GAMMA25  0x59
 134 #define KS_GAMMA26  0x5a
 135 #define KS_GAMMA27  0x5b
 136 #define KS_GAMMA28  0x5c
 137 #define KS_GAMMA29  0x5d
 138 #define KS_GAMMA30  0x5e
 139 #define KS_GAMMA31  0x5f
 140 #define KS_GAMMAD0  0x60
 141 #define KS_GAMMAD1  0x61
 142 #define KS_GAMMAD2  0x62
 143 #define KS_GAMMAD3  0x63
 144 #define KS_GAMMAD4  0x64
 145 #define KS_GAMMAD5  0x65
 146 #define KS_GAMMAD6  0x66
 147 #define KS_GAMMAD7  0x67
 148 #define KS_GAMMAD8  0x68
 149 #define KS_GAMMAD9  0x69
 150 #define KS_GAMMAD10 0x6a
 151 #define KS_GAMMAD11 0x6b
 152 #define KS_GAMMAD12 0x6c
 153 #define KS_GAMMAD13 0x6d
 154 #define KS_GAMMAD14 0x6e
 155 #define KS_GAMMAD15 0x6f
 156 #define KS_GAMMAD16 0x70
 157 #define KS_GAMMAD17 0x71
 158 #define KS_GAMMAD18 0x72
 159 #define KS_GAMMAD19 0x73
 160 #define KS_GAMMAD20 0x74
 161 #define KS_GAMMAD21 0x75
 162 #define KS_GAMMAD22 0x76
 163 #define KS_GAMMAD23 0x77
 164 #define KS_GAMMAD24 0x78
 165 #define KS_GAMMAD25 0x79
 166 #define KS_GAMMAD26 0x7a
 167 #define KS_GAMMAD27 0x7b
 168 #define KS_GAMMAD28 0x7c
 169 #define KS_GAMMAD29 0x7d
 170 #define KS_GAMMAD30 0x7e
 171 #define KS_GAMMAD31 0x7f
 172
 173
 174 /****************************************************************************
 175 * mga_dev : represents one ks0127 chip.
 176 ****************************************************************************/
 177
 178 struct adjust {
 179         int     contrast;
 180         int     bright;
 181         int     hue;
 182         int     ugain;
 183         int     vgain;
 184 };
 185
 186 struct ks0127 {
 187         struct v4l2_subdev sd;
 188         v4l2_std_id     norm;
 189         u8              regs[256];
 190 };
 191
 192 static inline struct ks0127 *to_ks0127(struct v4l2_subdev *sd)
 193 {
 194         return container_of(sd, struct ks0127, sd);
 195 }
 196
 197
 198 static int debug; /* insmod parameter */
 199
 200 module_param(debug, int, 0);
 201 MODULE_PARM_DESC(debug, "Debug output");
 202
 203 static u8 reg_defaults[64];
 204
 205 static void init_reg_defaults(void)
 206 {
 207         static int initialized;
 208         u8 *table = reg_defaults;
 209
 210         if (initialized)
 211                 return;
 212         initialized = 1;
 213
 214         table[KS_CMDA]     = 0x2c;  /* VSE=0, CCIR 601, autodetect standard */
 215         table[KS_CMDB]     = 0x12;  /* VALIGN=0, AGC control and input */
 216         table[KS_CMDC]     = 0x00;  /* Test options */
 217         /* clock & input select, write 1 to PORTA */
 218         table[KS_CMDD]     = 0x01;
 219         table[KS_HAVB]     = 0x00;  /* HAV Start Control */
 220         table[KS_HAVE]     = 0x00;  /* HAV End Control */
 221         table[KS_HS1B]     = 0x10;  /* HS1 Start Control */
 222         table[KS_HS1E]     = 0x00;  /* HS1 End Control */
 223         table[KS_HS2B]     = 0x00;  /* HS2 Start Control */
 224         table[KS_HS2E]     = 0x00;  /* HS2 End Control */
 225         table[KS_AGC]      = 0x53;  /* Manual setting for AGC */
 226         table[KS_HXTRA]    = 0x00;  /* Extra Bits for HAV and HS1/2 */
 227         table[KS_CDEM]     = 0x00;  /* Chroma Demodulation Control */
 228         table[KS_PORTAB]   = 0x0f;  /* port B is input, port A output GPPORT */
 229         table[KS_LUMA]     = 0x01;  /* Luma control */
 230         table[KS_CON]      = 0x00;  /* Contrast Control */
 231         table[KS_BRT]      = 0x00;  /* Brightness Control */
 232         table[KS_CHROMA]   = 0x2a;  /* Chroma control A */
 233         table[KS_CHROMB]   = 0x90;  /* Chroma control B */
 234         table[KS_DEMOD]    = 0x00;  /* Chroma Demodulation Control & Status */
 235         table[KS_SAT]      = 0x00;  /* Color Saturation Control*/
 236         table[KS_HUE]      = 0x00;  /* Hue Control */
 237         table[KS_VERTIA]   = 0x00;  /* Vertical Processing Control A */
 238         /* Vertical Processing Control B, luma 1 line delayed */
 239         table[KS_VERTIB]   = 0x12;
 240         table[KS_VERTIC]   = 0x0b;  /* Vertical Processing Control C */
 241         table[KS_HSCLL]    = 0x00;  /* Horizontal Scaling Ratio Low */
 242         table[KS_HSCLH]    = 0x00;  /* Horizontal Scaling Ratio High */
 243         table[KS_VSCLL]    = 0x00;  /* Vertical Scaling Ratio Low */
 244         table[KS_VSCLH]    = 0x00;  /* Vertical Scaling Ratio High */
 245         /* 16 bit YCbCr 4:2:2 output; I can't make the bt866 like 8 bit /Sam */
 246         table[KS_OFMTA]    = 0x30;
 247         table[KS_OFMTB]    = 0x00;  /* Output Control B */
 248         /* VBI Decoder Control; 4bit fmt: avoid Y overflow */
 249         table[KS_VBICTL]   = 0x5d;
 250         table[KS_CCDAT2]   = 0x00;  /* Read Only register */
 251         table[KS_CCDAT1]   = 0x00;  /* Read Only register */
 252         table[KS_VBIL30]   = 0xa8;  /* VBI data decoding options */
 253         table[KS_VBIL74]   = 0xaa;  /* VBI data decoding options */
 254         table[KS_VBIL118]  = 0x2a;  /* VBI data decoding options */
 255         table[KS_VBIL1512] = 0x00;  /* VBI data decoding options */
 256         table[KS_TTFRAM]   = 0x00;  /* Teletext frame alignment pattern */
 257         table[KS_TESTA]    = 0x00;  /* test register, shouldn't be written */
 258         table[KS_UVOFFH]   = 0x00;  /* UV Offset Adjustment High */
 259         table[KS_UVOFFL]   = 0x00;  /* UV Offset Adjustment Low */
 260         table[KS_UGAIN]    = 0x00;  /* U Component Gain Adjustment */
 261         table[KS_VGAIN]    = 0x00;  /* V Component Gain Adjustment */
 262         table[KS_VAVB]     = 0x07;  /* VAV Begin */
 263         table[KS_VAVE]     = 0x00;  /* VAV End */
 264         table[KS_CTRACK]   = 0x00;  /* Chroma Tracking Control */
 265         table[KS_POLCTL]   = 0x41;  /* Timing Signal Polarity Control */
 266         table[KS_REFCOD]   = 0x80;  /* Reference Code Insertion Control */
 267         table[KS_INVALY]   = 0x10;  /* Invalid Y Code */
 268         table[KS_INVALU]   = 0x80;  /* Invalid U Code */
 269         table[KS_INVALV]   = 0x80;  /* Invalid V Code */
 270         table[KS_UNUSEY]   = 0x10;  /* Unused Y Code */
 271         table[KS_UNUSEU]   = 0x80;  /* Unused U Code */
 272         table[KS_UNUSEV]   = 0x80;  /* Unused V Code */
 273         table[KS_USRSAV]   = 0x00;  /* reserved */
 274         table[KS_USREAV]   = 0x00;  /* reserved */
 275         table[KS_SHS1A]    = 0x00;  /* User Defined SHS1 A */
 276         /* User Defined SHS1 B, ALT656=1 on 0127B */
 277         table[KS_SHS1B]    = 0x80;
 278         table[KS_SHS1C]    = 0x00;  /* User Defined SHS1 C */
 279         table[KS_CMDE]     = 0x00;  /* Command Register E */
 280         table[KS_VSDEL]    = 0x00;  /* VS Delay Control */
 281         /* Command Register F, update -immediately- */
 282         /* (there might come no vsync)*/
 283         table[KS_CMDF]     = 0x02;
 284 }
 285
 286
 287 /* We need to manually read because of a bug in the KS0127 chip.
 288  *
 289  * An explanation from kayork@mail.utexas.edu:
 290  *
 291  * During I2C reads, the KS0127 only samples for a stop condition
 292  * during the place where the acknowledge bit should be. Any standard
 293  * I2C implementation (correctly) throws in another clock transition
 294  * at the 9th bit, and the KS0127 will not recognize the stop condition
 295  * and will continue to clock out data.
 296  *
 297  * So we have to do the read ourself.  Big deal.
 298  *         workaround in i2c-algo-bit
 299  */
 300
 301
 302 static u8 ks0127_read(struct v4l2_subdev *sd, u8 reg)
 303 {
 304         struct i2c_client *client = v4l2_get_subdevdata(sd);
 305         char val = 0;
 306         struct i2c_msg msgs[] = {
 307                 {
 308                         .addr = client->addr,
 309                         .len = sizeof(reg),
 310                         .buf = &reg
 311                 },
 312                 {
 313                         .addr = client->addr,
 314                         .flags = I2C_M_RD | I2C_M_NO_RD_ACK,
 315                         .len = sizeof(val),
 316                         .buf = &val
 317                 }
 318         };
 319         int ret;
 320
 321         ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 322         if (ret != ARRAY_SIZE(msgs))
 323                 v4l2_dbg(1, debug, sd, "read error\n");
 324
 325         return val;
 326 }
 327
 328
 329 static void ks0127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
 330 {
 331         struct i2c_client *client = v4l2_get_subdevdata(sd);
 332         struct ks0127 *ks = to_ks0127(sd);
 333         char msg[] = { reg, val };
 334
 335         if (i2c_master_send(client, msg, sizeof(msg)) != sizeof(msg))
 336                 v4l2_dbg(1, debug, sd, "write error\n");
 337
 338         ks->regs[reg] = val;
 339 }
 340
 341
 342 /* generic bit-twiddling */
 343 static void ks0127_and_or(struct v4l2_subdev *sd, u8 reg, u8 and_v, u8 or_v)
 344 {
 345         struct ks0127 *ks = to_ks0127(sd);
 346
 347         u8 val = ks->regs[reg];
 348         val = (val & and_v) | or_v;
 349         ks0127_write(sd, reg, val);
 350 }
 351
 352
 353
 354 /****************************************************************************
 355 * ks0127 private api
 356 ****************************************************************************/
 357 static void ks0127_init(struct v4l2_subdev *sd)
 358 {
 359         u8 *table = reg_defaults;
 360         int i;
 361
 362         v4l2_dbg(1, debug, sd, "reset\n");
 363         msleep(1);
 364
 365         /* initialize all registers to known values */
 366         /* (except STAT, 0x21, 0x22, TEST and 0x38,0x39) */
 367
 368         for (i = 1; i < 33; i++)
 369                 ks0127_write(sd, i, table[i]);
 370
 371         for (i = 35; i < 40; i++)
 372                 ks0127_write(sd, i, table[i]);
 373
 374         for (i = 41; i < 56; i++)
 375                 ks0127_write(sd, i, table[i]);
 376
 377         for (i = 58; i < 64; i++)
 378                 ks0127_write(sd, i, table[i]);
 379
 380
 381         if ((ks0127_read(sd, KS_STAT) & 0x80) == 0) {
 382                 v4l2_dbg(1, debug, sd, "ks0122s found\n");
 383                 return;
 384         }
 385
 386         switch (ks0127_read(sd, KS_CMDE) & 0x0f) {
 387         case 0:
 388                 v4l2_dbg(1, debug, sd, "ks0127 found\n");
 389                 break;
 390
 391         case 9:
 392                 v4l2_dbg(1, debug, sd, "ks0127B Revision A found\n");
 393                 break;
 394
 395         default:
 396                 v4l2_dbg(1, debug, sd, "unknown revision\n");
 397                 break;
 398         }
 399 }
 400
 401 static int ks0127_s_routing(struct v4l2_subdev *sd,
 402                             u32 input, u32 output, u32 config)
 403 {
 404         struct ks0127 *ks = to_ks0127(sd);
 405
 406         switch (input) {
 407         case KS_INPUT_COMPOSITE_1:
 408         case KS_INPUT_COMPOSITE_2:
 409         case KS_INPUT_COMPOSITE_3:
 410         case KS_INPUT_COMPOSITE_4:
 411         case KS_INPUT_COMPOSITE_5:
 412         case KS_INPUT_COMPOSITE_6:
 413                 v4l2_dbg(1, debug, sd,
 414                         "s_routing %d: Composite\n", input);
 415                 /* autodetect 50/60 Hz */
 416                 ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
 417                 /* VSE=0 */
 418                 ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
 419                 /* set input line */
 420                 ks0127_and_or(sd, KS_CMDB,   0xb0, input);
 421                 /* non-freerunning mode */
 422                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
 423                 /* analog input */
 424                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
 425                 /* enable chroma demodulation */
 426                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
 427                 /* chroma trap, HYBWR=1 */
 428                 ks0127_and_or(sd, KS_LUMA,   0x00,
 429                                (reg_defaults[KS_LUMA])|0x0c);
 430                 /* scaler fullbw, luma comb off */
 431                 ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
 432                 /* manual chroma comb .25 .5 .25 */
 433                 ks0127_and_or(sd, KS_VERTIC, 0x0f, 0x90);
 434
 435                 /* chroma path delay */
 436                 ks0127_and_or(sd, KS_CHROMB, 0x0f, 0x90);
 437
 438                 ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
 439                 ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
 440                 ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
 441                 ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
 442                 break;
 443
 444         case KS_INPUT_SVIDEO_1:
 445         case KS_INPUT_SVIDEO_2:
 446         case KS_INPUT_SVIDEO_3:
 447                 v4l2_dbg(1, debug, sd,
 448                         "s_routing %d: S-Video\n", input);
 449                 /* autodetect 50/60 Hz */
 450                 ks0127_and_or(sd, KS_CMDA,   0xfc, 0x00);
 451                 /* VSE=0 */
 452                 ks0127_and_or(sd, KS_CMDA,   ~0x40, 0x00);
 453                 /* set input line */
 454                 ks0127_and_or(sd, KS_CMDB,   0xb0, input);
 455                 /* non-freerunning mode */
 456                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x0a);
 457                 /* analog input */
 458                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x00);
 459                 /* enable chroma demodulation */
 460                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x00);
 461                 ks0127_and_or(sd, KS_LUMA, 0x00,
 462                                reg_defaults[KS_LUMA]);
 463                 /* disable luma comb */
 464                 ks0127_and_or(sd, KS_VERTIA, 0x08,
 465                                (reg_defaults[KS_VERTIA]&0xf0)|0x01);
 466                 ks0127_and_or(sd, KS_VERTIC, 0x0f,
 467                                reg_defaults[KS_VERTIC]&0xf0);
 468
 469                 ks0127_and_or(sd, KS_CHROMB, 0x0f,
 470                                reg_defaults[KS_CHROMB]&0xf0);
 471
 472                 ks0127_write(sd, KS_UGAIN, reg_defaults[KS_UGAIN]);
 473                 ks0127_write(sd, KS_VGAIN, reg_defaults[KS_VGAIN]);
 474                 ks0127_write(sd, KS_UVOFFH, reg_defaults[KS_UVOFFH]);
 475                 ks0127_write(sd, KS_UVOFFL, reg_defaults[KS_UVOFFL]);
 476                 break;
 477
 478         case KS_INPUT_YUV656:
 479                 v4l2_dbg(1, debug, sd, "s_routing 15: YUV656\n");
 480                 if (ks->norm & V4L2_STD_525_60)
 481                         /* force 60 Hz */
 482                         ks0127_and_or(sd, KS_CMDA,   0xfc, 0x03);
 483                 else
 484                         /* force 50 Hz */
 485                         ks0127_and_or(sd, KS_CMDA,   0xfc, 0x02);
 486
 487                 ks0127_and_or(sd, KS_CMDA,   0xff, 0x40); /* VSE=1 */
 488                 /* set input line and VALIGN */
 489                 ks0127_and_or(sd, KS_CMDB,   0xb0, (input | 0x40));
 490                 /* freerunning mode, */
 491                 /* TSTGEN = 1 TSTGFR=11 TSTGPH=0 TSTGPK=0  VMEM=1*/
 492                 ks0127_and_or(sd, KS_CMDC,   0x70, 0x87);
 493                 /* digital input, SYNDIR = 0 INPSL=01 CLKDIR=0 EAV=0 */
 494                 ks0127_and_or(sd, KS_CMDD,   0x03, 0x08);
 495                 /* disable chroma demodulation */
 496                 ks0127_and_or(sd, KS_CTRACK, 0xcf, 0x30);
 497                 /* HYPK =01 CTRAP = 0 HYBWR=0 PED=1 RGBH=1 UNIT=1 */
 498                 ks0127_and_or(sd, KS_LUMA,   0x00, 0x71);
 499                 ks0127_and_or(sd, KS_VERTIC, 0x0f,
 500                                reg_defaults[KS_VERTIC]&0xf0);
 501
 502                 /* scaler fullbw, luma comb off */
 503                 ks0127_and_or(sd, KS_VERTIA, 0x08, 0x81);
 504
 505                 ks0127_and_or(sd, KS_CHROMB, 0x0f,
 506                                reg_defaults[KS_CHROMB]&0xf0);
 507
 508                 ks0127_and_or(sd, KS_CON, 0x00, 0x00);
 509                 ks0127_and_or(sd, KS_BRT, 0x00, 32);    /* spec: 34 */
 510                         /* spec: 229 (e5) */
 511                 ks0127_and_or(sd, KS_SAT, 0x00, 0xe8);
 512                 ks0127_and_or(sd, KS_HUE, 0x00, 0);
 513
 514                 ks0127_and_or(sd, KS_UGAIN, 0x00, 238);
 515                 ks0127_and_or(sd, KS_VGAIN, 0x00, 0x00);
 516
 517                 /*UOFF:0x30, VOFF:0x30, TSTCGN=1 */
 518                 ks0127_and_or(sd, KS_UVOFFH, 0x00, 0x4f);
 519                 ks0127_and_or(sd, KS_UVOFFL, 0x00, 0x00);
 520                 break;
 521
 522         default:
 523                 v4l2_dbg(1, debug, sd,
 524                         "s_routing: Unknown input %d\n", input);
 525                 break;
 526         }
 527
 528         /* hack: CDMLPF sometimes spontaneously switches on; */
 529         /* force back off */
 530         ks0127_write(sd, KS_DEMOD, reg_defaults[KS_DEMOD]);
 531         return 0;
 532 }
 533
 534 static int ks0127_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 535 {
 536         struct ks0127 *ks = to_ks0127(sd);
 537
 538         /* Set to automatic SECAM/Fsc mode */
 539         ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
 540
 541         ks->norm = std;
 542         if (std & V4L2_STD_NTSC) {
 543                 v4l2_dbg(1, debug, sd,
 544                         "s_std: NTSC_M\n");
 545                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
 546         } else if (std & V4L2_STD_PAL_N) {
 547                 v4l2_dbg(1, debug, sd,
 548                         "s_std: NTSC_N (fixme)\n");
 549                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
 550         } else if (std & V4L2_STD_PAL) {
 551                 v4l2_dbg(1, debug, sd,
 552                         "s_std: PAL_N\n");
 553                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x20);
 554         } else if (std & V4L2_STD_PAL_M) {
 555                 v4l2_dbg(1, debug, sd,
 556                         "s_std: PAL_M (fixme)\n");
 557                 ks0127_and_or(sd, KS_CHROMA, 0x9f, 0x40);
 558         } else if (std & V4L2_STD_SECAM) {
 559                 v4l2_dbg(1, debug, sd,
 560                         "s_std: SECAM\n");
 561
 562                 /* set to secam autodetection */
 563                 ks0127_and_or(sd, KS_CHROMA, 0xdf, 0x20);
 564                 ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x00);
 565                 schedule_timeout_interruptible(HZ/10+1);
 566
 567                 /* did it autodetect? */
 568                 if (!(ks0127_read(sd, KS_DEMOD) & 0x40))
 569                         /* force to secam mode */
 570                         ks0127_and_or(sd, KS_DEMOD, 0xf0, 0x0f);
 571         } else {
 572                 v4l2_dbg(1, debug, sd, "s_std: Unknown norm %llx\n",
 573                                (unsigned long long)std);
 574         }
 575         return 0;
 576 }
 577
 578 static int ks0127_s_stream(struct v4l2_subdev *sd, int enable)
 579 {
 580         v4l2_dbg(1, debug, sd, "s_stream(%d)\n", enable);
 581         if (enable) {
 582                 /* All output pins on */
 583                 ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x30);
 584                 /* Obey the OEN pin */
 585                 ks0127_and_or(sd, KS_CDEM, 0x7f, 0x00);
 586         } else {
 587                 /* Video output pins off */
 588                 ks0127_and_or(sd, KS_OFMTA, 0xcf, 0x00);
 589                 /* Ignore the OEN pin */
 590                 ks0127_and_or(sd, KS_CDEM, 0x7f, 0x80);
 591         }
 592         return 0;
 593 }
 594
 595 static int ks0127_status(struct v4l2_subdev *sd, u32 *pstatus, v4l2_std_id *pstd)
 596 {
 597         int stat = V4L2_IN_ST_NO_SIGNAL;
 598         u8 status;
 599         v4l2_std_id std = pstd ? *pstd : V4L2_STD_ALL;
 600
 601         status = ks0127_read(sd, KS_STAT);
 602         if (!(status & 0x20))            /* NOVID not set */
 603                 stat = 0;
 604         if (!(status & 0x01)) {               /* CLOCK set */
 605                 stat |= V4L2_IN_ST_NO_COLOR;
 606                 std = V4L2_STD_UNKNOWN;
 607         } else {
 608                 if ((status & 0x08))               /* PALDET set */
 609                         std &= V4L2_STD_PAL;
 610                 else
 611                         std &= V4L2_STD_NTSC;
 612         }
 613         if ((status & 0x10))               /* PALDET set */
 614                 std &= V4L2_STD_525_60;
 615         else
 616                 std &= V4L2_STD_625_50;
 617         if (pstd)
 618                 *pstd = std;
 619         if (pstatus)
 620                 *pstatus = stat;
 621         return 0;
 622 }
 623
 624 static int ks0127_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 625 {
 626         v4l2_dbg(1, debug, sd, "querystd\n");
 627         return ks0127_status(sd, NULL, std);
 628 }
 629
 630 static int ks0127_g_input_status(struct v4l2_subdev *sd, u32 *status)
 631 {
 632         v4l2_dbg(1, debug, sd, "g_input_status\n");
 633         return ks0127_status(sd, status, NULL);
 634 }
 635
 636 /* ----------------------------------------------------------------------- */
 637
 638 static const struct v4l2_subdev_video_ops ks0127_video_ops = {
 639         .s_std = ks0127_s_std,
 640         .s_routing = ks0127_s_routing,
 641         .s_stream = ks0127_s_stream,
 642         .querystd = ks0127_querystd,
 643         .g_input_status = ks0127_g_input_status,
 644 };
 645
 646 static const struct v4l2_subdev_ops ks0127_ops = {
 647         .video = &ks0127_video_ops,
 648 };
 649
 650 /* ----------------------------------------------------------------------- */
 651
 652
 653 static int ks0127_probe(struct i2c_client *client, const struct i2c_device_id *id)
 654 {
 655         struct ks0127 *ks;
 656         struct v4l2_subdev *sd;
 657
 658         v4l_info(client, "%s chip found @ 0x%x (%s)\n",
 659                 client->addr == (I2C_KS0127_ADDON >> 1) ? "addon" : "on-board",
 660                 client->addr << 1, client->adapter->name);
 661
 662         ks = devm_kzalloc(&client->dev, sizeof(*ks), GFP_KERNEL);
 663         if (ks == NULL)
 664                 return -ENOMEM;
 665         sd = &ks->sd;
 666         v4l2_i2c_subdev_init(sd, client, &ks0127_ops);
 667
 668         /* power up */
 669         init_reg_defaults();
 670         ks0127_write(sd, KS_CMDA, 0x2c);
 671         mdelay(10);
 672
 673         /* reset the device */
 674         ks0127_init(sd);
 675         return 0;
 676 }
 677
 678 static int ks0127_remove(struct i2c_client *client)
 679 {
 680         struct v4l2_subdev *sd = i2c_get_clientdata(client);
 681
 682         v4l2_device_unregister_subdev(sd);
 683         ks0127_write(sd, KS_OFMTA, 0x20); /* tristate */
 684         ks0127_write(sd, KS_CMDA, 0x2c | 0x80); /* power down */
 685         return 0;
 686 }
 687
 688 static const struct i2c_device_id ks0127_id[] = {
 689         { "ks0127", 0 },
 690         { "ks0127b", 0 },
 691         { "ks0122s", 0 },
 692         { }
 693 };
 694 MODULE_DEVICE_TABLE(i2c, ks0127_id);
 695
 696 static struct i2c_driver ks0127_driver = {
 697         .driver = {
 698                 .name   = "ks0127",
 699         },
 700         .probe          = ks0127_probe,
 701         .remove         = ks0127_remove,
 702         .id_table       = ks0127_id,
 703 };
 704
 705 module_i2c_driver(ks0127_driver);