Merge branches 'misc', 'sa1100-for-next' and 'spectre' into for-linus
[linux-2.6-microblaze.git] / drivers / leds / leds-an30259a.c
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Driver for Panasonic AN30259A 3-channel LED driver
4 //
5 // Copyright (c) 2018 Simon Shields <simon@lineageos.org>
6 //
7 // Datasheet:
8 // https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf
9
10 #include <linux/i2c.h>
11 #include <linux/leds.h>
12 #include <linux/module.h>
13 #include <linux/mutex.h>
14 #include <linux/of.h>
15 #include <linux/regmap.h>
16 #include <uapi/linux/uleds.h>
17
18 #define AN30259A_MAX_LEDS 3
19
20 #define AN30259A_REG_SRESET 0x00
21 #define AN30259A_LED_SRESET BIT(0)
22
23 /* LED power registers */
24 #define AN30259A_REG_LED_ON 0x01
25 #define AN30259A_LED_EN(x) BIT((x) - 1)
26 #define AN30259A_LED_SLOPE(x) BIT(((x) - 1) + 4)
27
28 #define AN30259A_REG_LEDCC(x) (0x03 + ((x) - 1))
29
30 /* slope control registers */
31 #define AN30259A_REG_SLOPE(x) (0x06 + ((x) - 1))
32 #define AN30259A_LED_SLOPETIME1(x) (x)
33 #define AN30259A_LED_SLOPETIME2(x) ((x) << 4)
34
35 #define AN30259A_REG_LEDCNT1(x) (0x09 + (4 * ((x) - 1)))
36 #define AN30259A_LED_DUTYMAX(x) ((x) << 4)
37 #define AN30259A_LED_DUTYMID(x) (x)
38
39 #define AN30259A_REG_LEDCNT2(x) (0x0A + (4 * ((x) - 1)))
40 #define AN30259A_LED_DELAY(x) ((x) << 4)
41 #define AN30259A_LED_DUTYMIN(x) (x)
42
43 /* detention time control (length of each slope step) */
44 #define AN30259A_REG_LEDCNT3(x) (0x0B + (4 * ((x) - 1)))
45 #define AN30259A_LED_DT1(x) (x)
46 #define AN30259A_LED_DT2(x) ((x) << 4)
47
48 #define AN30259A_REG_LEDCNT4(x) (0x0C + (4 * ((x) - 1)))
49 #define AN30259A_LED_DT3(x) (x)
50 #define AN30259A_LED_DT4(x) ((x) << 4)
51
52 #define AN30259A_REG_MAX 0x14
53
54 #define AN30259A_BLINK_MAX_TIME 7500 /* ms */
55 #define AN30259A_SLOPE_RESOLUTION 500 /* ms */
56
57 #define STATE_OFF 0
58 #define STATE_KEEP 1
59 #define STATE_ON 2
60
61 struct an30259a;
62
63 struct an30259a_led {
64         struct an30259a *chip;
65         struct led_classdev cdev;
66         u32 num;
67         u32 default_state;
68         bool sloping;
69         char label[LED_MAX_NAME_SIZE];
70 };
71
72 struct an30259a {
73         struct mutex mutex; /* held when writing to registers */
74         struct i2c_client *client;
75         struct an30259a_led leds[AN30259A_MAX_LEDS];
76         struct regmap *regmap;
77         int num_leds;
78 };
79
80 static int an30259a_brightness_set(struct led_classdev *cdev,
81                                    enum led_brightness brightness)
82 {
83         struct an30259a_led *led;
84         int ret;
85         unsigned int led_on;
86
87         led = container_of(cdev, struct an30259a_led, cdev);
88         mutex_lock(&led->chip->mutex);
89
90         ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
91         if (ret)
92                 goto error;
93
94         switch (brightness) {
95         case LED_OFF:
96                 led_on &= ~AN30259A_LED_EN(led->num);
97                 led_on &= ~AN30259A_LED_SLOPE(led->num);
98                 led->sloping = false;
99                 break;
100         default:
101                 led_on |= AN30259A_LED_EN(led->num);
102                 if (led->sloping)
103                         led_on |= AN30259A_LED_SLOPE(led->num);
104                 ret = regmap_write(led->chip->regmap,
105                                    AN30259A_REG_LEDCNT1(led->num),
106                                    AN30259A_LED_DUTYMAX(0xf) |
107                                    AN30259A_LED_DUTYMID(0xf));
108                 if (ret)
109                         goto error;
110                 break;
111         }
112
113         ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
114         if (ret)
115                 goto error;
116
117         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCC(led->num),
118                            brightness);
119
120 error:
121         mutex_unlock(&led->chip->mutex);
122
123         return ret;
124 }
125
126 static int an30259a_blink_set(struct led_classdev *cdev,
127                               unsigned long *delay_off, unsigned long *delay_on)
128 {
129         struct an30259a_led *led;
130         int ret, num;
131         unsigned int led_on;
132         unsigned long off = *delay_off, on = *delay_on;
133
134         led = container_of(cdev, struct an30259a_led, cdev);
135
136         mutex_lock(&led->chip->mutex);
137         num = led->num;
138
139         /* slope time can only be a multiple of 500ms. */
140         if (off % AN30259A_SLOPE_RESOLUTION || on % AN30259A_SLOPE_RESOLUTION) {
141                 ret = -EINVAL;
142                 goto error;
143         }
144
145         /* up to a maximum of 7500ms. */
146         if (off > AN30259A_BLINK_MAX_TIME || on > AN30259A_BLINK_MAX_TIME) {
147                 ret = -EINVAL;
148                 goto error;
149         }
150
151         /* if no blink specified, default to 1 Hz. */
152         if (!off && !on) {
153                 *delay_off = off = 500;
154                 *delay_on = on = 500;
155         }
156
157         /* convert into values the HW will understand. */
158         off /= AN30259A_SLOPE_RESOLUTION;
159         on /= AN30259A_SLOPE_RESOLUTION;
160
161         /* duty min should be zero (=off), delay should be zero. */
162         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT2(num),
163                            AN30259A_LED_DELAY(0) | AN30259A_LED_DUTYMIN(0));
164         if (ret)
165                 goto error;
166
167         /* reset detention time (no "breathing" effect). */
168         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT3(num),
169                            AN30259A_LED_DT1(0) | AN30259A_LED_DT2(0));
170         if (ret)
171                 goto error;
172         ret = regmap_write(led->chip->regmap, AN30259A_REG_LEDCNT4(num),
173                            AN30259A_LED_DT3(0) | AN30259A_LED_DT4(0));
174         if (ret)
175                 goto error;
176
177         /* slope time controls on/off cycle length. */
178         ret = regmap_write(led->chip->regmap, AN30259A_REG_SLOPE(num),
179                            AN30259A_LED_SLOPETIME1(off) |
180                            AN30259A_LED_SLOPETIME2(on));
181         if (ret)
182                 goto error;
183
184         /* Finally, enable slope mode. */
185         ret = regmap_read(led->chip->regmap, AN30259A_REG_LED_ON, &led_on);
186         if (ret)
187                 goto error;
188
189         led_on |= AN30259A_LED_SLOPE(num) | AN30259A_LED_EN(led->num);
190
191         ret = regmap_write(led->chip->regmap, AN30259A_REG_LED_ON, led_on);
192
193         if (!ret)
194                 led->sloping = true;
195 error:
196         mutex_unlock(&led->chip->mutex);
197
198         return ret;
199 }
200
201 static int an30259a_dt_init(struct i2c_client *client,
202                             struct an30259a *chip)
203 {
204         struct device_node *np = client->dev.of_node, *child;
205         int count, ret;
206         int i = 0;
207         const char *str;
208         struct an30259a_led *led;
209
210         count = of_get_child_count(np);
211         if (!count || count > AN30259A_MAX_LEDS)
212                 return -EINVAL;
213
214         for_each_available_child_of_node(np, child) {
215                 u32 source;
216
217                 ret = of_property_read_u32(child, "reg", &source);
218                 if (ret != 0 || !source || source > AN30259A_MAX_LEDS) {
219                         dev_err(&client->dev, "Couldn't read LED address: %d\n",
220                                 ret);
221                         count--;
222                         continue;
223                 }
224
225                 led = &chip->leds[i];
226
227                 led->num = source;
228                 led->chip = chip;
229
230                 if (of_property_read_string(child, "label", &str))
231                         snprintf(led->label, sizeof(led->label), "an30259a::");
232                 else
233                         snprintf(led->label, sizeof(led->label), "an30259a:%s",
234                                  str);
235
236                 led->cdev.name = led->label;
237
238                 if (!of_property_read_string(child, "default-state", &str)) {
239                         if (!strcmp(str, "on"))
240                                 led->default_state = STATE_ON;
241                         else if (!strcmp(str, "keep"))
242                                 led->default_state = STATE_KEEP;
243                         else
244                                 led->default_state = STATE_OFF;
245                 }
246
247                 of_property_read_string(child, "linux,default-trigger",
248                                         &led->cdev.default_trigger);
249
250                 i++;
251         }
252
253         if (!count)
254                 return -EINVAL;
255
256         chip->num_leds = i;
257
258         return 0;
259 }
260
261 static const struct regmap_config an30259a_regmap_config = {
262         .reg_bits = 8,
263         .val_bits = 8,
264         .max_register = AN30259A_REG_MAX,
265 };
266
267 static void an30259a_init_default_state(struct an30259a_led *led)
268 {
269         struct an30259a *chip = led->chip;
270         int led_on, err;
271
272         switch (led->default_state) {
273         case STATE_ON:
274                 led->cdev.brightness = LED_FULL;
275                 break;
276         case STATE_KEEP:
277                 err = regmap_read(chip->regmap, AN30259A_REG_LED_ON, &led_on);
278                 if (err)
279                         break;
280
281                 if (!(led_on & AN30259A_LED_EN(led->num))) {
282                         led->cdev.brightness = LED_OFF;
283                         break;
284                 }
285                 regmap_read(chip->regmap, AN30259A_REG_LEDCC(led->num),
286                             &led->cdev.brightness);
287                 break;
288         default:
289                 led->cdev.brightness = LED_OFF;
290         }
291
292         an30259a_brightness_set(&led->cdev, led->cdev.brightness);
293 }
294
295 static int an30259a_probe(struct i2c_client *client)
296 {
297         struct an30259a *chip;
298         int i, err;
299
300         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
301         if (!chip)
302                 return -ENOMEM;
303
304         err = an30259a_dt_init(client, chip);
305         if (err < 0)
306                 return err;
307
308         mutex_init(&chip->mutex);
309         chip->client = client;
310         i2c_set_clientdata(client, chip);
311
312         chip->regmap = devm_regmap_init_i2c(client, &an30259a_regmap_config);
313
314         for (i = 0; i < chip->num_leds; i++) {
315                 an30259a_init_default_state(&chip->leds[i]);
316                 chip->leds[i].cdev.brightness_set_blocking =
317                         an30259a_brightness_set;
318                 chip->leds[i].cdev.blink_set = an30259a_blink_set;
319
320                 err = devm_led_classdev_register(&client->dev,
321                                                  &chip->leds[i].cdev);
322                 if (err < 0)
323                         goto exit;
324         }
325         return 0;
326
327 exit:
328         mutex_destroy(&chip->mutex);
329         return err;
330 }
331
332 static int an30259a_remove(struct i2c_client *client)
333 {
334         struct an30259a *chip = i2c_get_clientdata(client);
335
336         mutex_destroy(&chip->mutex);
337
338         return 0;
339 }
340
341 static const struct of_device_id an30259a_match_table[] = {
342         { .compatible = "panasonic,an30259a", },
343         { /* sentinel */ },
344 };
345
346 MODULE_DEVICE_TABLE(of, an30259a_match_table);
347
348 static const struct i2c_device_id an30259a_id[] = {
349         { "an30259a", 0 },
350         { /* sentinel */ },
351 };
352 MODULE_DEVICE_TABLE(i2c, an30259a_id);
353
354 static struct i2c_driver an30259a_driver = {
355         .driver = {
356                 .name = "leds-an32059a",
357                 .of_match_table = of_match_ptr(an30259a_match_table),
358         },
359         .probe_new = an30259a_probe,
360         .remove = an30259a_remove,
361         .id_table = an30259a_id,
362 };
363
364 module_i2c_driver(an30259a_driver);
365
366 MODULE_AUTHOR("Simon Shields <simon@lineageos.org>");
367 MODULE_DESCRIPTION("AN32059A LED driver");
368 MODULE_LICENSE("GPL v2");