drivers/iio/adc/rcar-gyroadc.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Renesas R-Car GyroADC driver
   4  *
   5  * Copyright 2016 Marek Vasut <marek.vasut@gmail.com>
   6  */
   7
   8 #include <linux/module.h>
   9 #include <linux/platform_device.h>
  10 #include <linux/delay.h>
  11 #include <linux/kernel.h>
  12 #include <linux/slab.h>
  13 #include <linux/io.h>
  14 #include <linux/clk.h>
  15 #include <linux/of.h>
  16 #include <linux/of_irq.h>
  17 #include <linux/regulator/consumer.h>
  18 #include <linux/of_platform.h>
  19 #include <linux/err.h>
  20 #include <linux/pm_runtime.h>
  21
  22 #include <linux/iio/iio.h>
  23 #include <linux/iio/sysfs.h>
  24 #include <linux/iio/trigger.h>
  25
  26 #define DRIVER_NAME                             "rcar-gyroadc"
  27
  28 /* GyroADC registers. */
  29 #define RCAR_GYROADC_MODE_SELECT                0x00
  30 #define RCAR_GYROADC_MODE_SELECT_1_MB88101A     0x0
  31 #define RCAR_GYROADC_MODE_SELECT_2_ADCS7476     0x1
  32 #define RCAR_GYROADC_MODE_SELECT_3_MAX1162      0x3
  33
  34 #define RCAR_GYROADC_START_STOP                 0x04
  35 #define RCAR_GYROADC_START_STOP_START           BIT(0)
  36
  37 #define RCAR_GYROADC_CLOCK_LENGTH               0x08
  38 #define RCAR_GYROADC_1_25MS_LENGTH              0x0c
  39
  40 #define RCAR_GYROADC_REALTIME_DATA(ch)          (0x10 + ((ch) * 4))
  41 #define RCAR_GYROADC_100MS_ADDED_DATA(ch)       (0x30 + ((ch) * 4))
  42 #define RCAR_GYROADC_10MS_AVG_DATA(ch)          (0x50 + ((ch) * 4))
  43
  44 #define RCAR_GYROADC_FIFO_STATUS                0x70
  45 #define RCAR_GYROADC_FIFO_STATUS_EMPTY(ch)      BIT(0 + (4 * (ch)))
  46 #define RCAR_GYROADC_FIFO_STATUS_FULL(ch)       BIT(1 + (4 * (ch)))
  47 #define RCAR_GYROADC_FIFO_STATUS_ERROR(ch)      BIT(2 + (4 * (ch)))
  48
  49 #define RCAR_GYROADC_INTR                       0x74
  50 #define RCAR_GYROADC_INTR_INT                   BIT(0)
  51
  52 #define RCAR_GYROADC_INTENR                     0x78
  53 #define RCAR_GYROADC_INTENR_INTEN               BIT(0)
  54
  55 #define RCAR_GYROADC_SAMPLE_RATE                800     /* Hz */
  56
  57 #define RCAR_GYROADC_RUNTIME_PM_DELAY_MS        2000
  58
  59 enum rcar_gyroadc_model {
  60         RCAR_GYROADC_MODEL_DEFAULT,
  61         RCAR_GYROADC_MODEL_R8A7792,
  62 };
  63
  64 struct rcar_gyroadc {
  65         struct device                   *dev;
  66         void __iomem                    *regs;
  67         struct clk                      *clk;
  68         struct regulator                *vref[8];
  69         unsigned int                    num_channels;
  70         enum rcar_gyroadc_model         model;
  71         unsigned int                    mode;
  72         unsigned int                    sample_width;
  73 };
  74
  75 static void rcar_gyroadc_hw_init(struct rcar_gyroadc *priv)
  76 {
  77         const unsigned long clk_mhz = clk_get_rate(priv->clk) / 1000000;
  78         const unsigned long clk_mul =
  79                 (priv->mode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) ? 10 : 5;
  80         unsigned long clk_len = clk_mhz * clk_mul;
  81
  82         /*
  83          * According to the R-Car Gen2 datasheet Rev. 1.01, Sept 08 2014,
  84          * page 77-7, clock length must be even number. If it's odd number,
  85          * add one.
  86          */
  87         if (clk_len & 1)
  88                 clk_len++;
  89
  90         /* Stop the GyroADC. */
  91         writel(0, priv->regs + RCAR_GYROADC_START_STOP);
  92
  93         /* Disable IRQ on V2H. */
  94         if (priv->model == RCAR_GYROADC_MODEL_R8A7792)
  95                 writel(0, priv->regs + RCAR_GYROADC_INTENR);
  96
  97         /* Set mode and timing. */
  98         writel(priv->mode, priv->regs + RCAR_GYROADC_MODE_SELECT);
  99         writel(clk_len, priv->regs + RCAR_GYROADC_CLOCK_LENGTH);
 100         writel(clk_mhz * 1250, priv->regs + RCAR_GYROADC_1_25MS_LENGTH);
 101 }
 102
 103 static void rcar_gyroadc_hw_start(struct rcar_gyroadc *priv)
 104 {
 105         /* Start sampling. */
 106         writel(RCAR_GYROADC_START_STOP_START,
 107                priv->regs + RCAR_GYROADC_START_STOP);
 108
 109         /*
 110          * Wait for the first conversion to complete. This is longer than
 111          * the 1.25 mS in the datasheet because 1.25 mS is not enough for
 112          * the hardware to deliver the first sample and the hardware does
 113          * then return zeroes instead of valid data.
 114          */
 115         mdelay(3);
 116 }
 117
 118 static void rcar_gyroadc_hw_stop(struct rcar_gyroadc *priv)
 119 {
 120         /* Stop the GyroADC. */
 121         writel(0, priv->regs + RCAR_GYROADC_START_STOP);
 122 }
 123
 124 #define RCAR_GYROADC_CHAN(_idx) {                               \
 125         .type                   = IIO_VOLTAGE,                  \
 126         .indexed                = 1,                            \
 127         .channel                = (_idx),                       \
 128         .info_mask_separate     = BIT(IIO_CHAN_INFO_RAW) |      \
 129                                   BIT(IIO_CHAN_INFO_SCALE),     \
 130         .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
 131 }
 132
 133 static const struct iio_chan_spec rcar_gyroadc_iio_channels_1[] = {
 134         RCAR_GYROADC_CHAN(0),
 135         RCAR_GYROADC_CHAN(1),
 136         RCAR_GYROADC_CHAN(2),
 137         RCAR_GYROADC_CHAN(3),
 138 };
 139
 140 static const struct iio_chan_spec rcar_gyroadc_iio_channels_2[] = {
 141         RCAR_GYROADC_CHAN(0),
 142         RCAR_GYROADC_CHAN(1),
 143         RCAR_GYROADC_CHAN(2),
 144         RCAR_GYROADC_CHAN(3),
 145         RCAR_GYROADC_CHAN(4),
 146         RCAR_GYROADC_CHAN(5),
 147         RCAR_GYROADC_CHAN(6),
 148         RCAR_GYROADC_CHAN(7),
 149 };
 150
 151 static const struct iio_chan_spec rcar_gyroadc_iio_channels_3[] = {
 152         RCAR_GYROADC_CHAN(0),
 153         RCAR_GYROADC_CHAN(1),
 154         RCAR_GYROADC_CHAN(2),
 155         RCAR_GYROADC_CHAN(3),
 156         RCAR_GYROADC_CHAN(4),
 157         RCAR_GYROADC_CHAN(5),
 158         RCAR_GYROADC_CHAN(6),
 159         RCAR_GYROADC_CHAN(7),
 160 };
 161
 162 static int rcar_gyroadc_set_power(struct rcar_gyroadc *priv, bool on)
 163 {
 164         struct device *dev = priv->dev;
 165         int ret;
 166
 167         if (on) {
 168                 ret = pm_runtime_get_sync(dev);
 169                 if (ret < 0)
 170                         pm_runtime_put_noidle(dev);
 171         } else {
 172                 pm_runtime_mark_last_busy(dev);
 173                 ret = pm_runtime_put_autosuspend(dev);
 174         }
 175
 176         return ret;
 177 }
 178
 179 static int rcar_gyroadc_read_raw(struct iio_dev *indio_dev,
 180                                  struct iio_chan_spec const *chan,
 181                                  int *val, int *val2, long mask)
 182 {
 183         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 184         struct regulator *consumer;
 185         unsigned int datareg = RCAR_GYROADC_REALTIME_DATA(chan->channel);
 186         unsigned int vref;
 187         int ret;
 188
 189         /*
 190          * MB88101 is special in that it has only single regulator for
 191          * all four channels.
 192          */
 193         if (priv->mode == RCAR_GYROADC_MODE_SELECT_1_MB88101A)
 194                 consumer = priv->vref[0];
 195         else
 196                 consumer = priv->vref[chan->channel];
 197
 198         switch (mask) {
 199         case IIO_CHAN_INFO_RAW:
 200                 if (chan->type != IIO_VOLTAGE)
 201                         return -EINVAL;
 202
 203                 /* Channel not connected. */
 204                 if (!consumer)
 205                         return -EINVAL;
 206
 207                 ret = iio_device_claim_direct_mode(indio_dev);
 208                 if (ret)
 209                         return ret;
 210
 211                 ret = rcar_gyroadc_set_power(priv, true);
 212                 if (ret < 0) {
 213                         iio_device_release_direct_mode(indio_dev);
 214                         return ret;
 215                 }
 216
 217                 *val = readl(priv->regs + datareg);
 218                 *val &= BIT(priv->sample_width) - 1;
 219
 220                 ret = rcar_gyroadc_set_power(priv, false);
 221                 iio_device_release_direct_mode(indio_dev);
 222                 if (ret < 0)
 223                         return ret;
 224
 225                 return IIO_VAL_INT;
 226         case IIO_CHAN_INFO_SCALE:
 227                 /* Channel not connected. */
 228                 if (!consumer)
 229                         return -EINVAL;
 230
 231                 vref = regulator_get_voltage(consumer);
 232                 *val = vref / 1000;
 233                 *val2 = 1 << priv->sample_width;
 234
 235                 return IIO_VAL_FRACTIONAL;
 236         case IIO_CHAN_INFO_SAMP_FREQ:
 237                 *val = RCAR_GYROADC_SAMPLE_RATE;
 238
 239                 return IIO_VAL_INT;
 240         default:
 241                 return -EINVAL;
 242         }
 243 }
 244
 245 static int rcar_gyroadc_reg_access(struct iio_dev *indio_dev,
 246                                    unsigned int reg, unsigned int writeval,
 247                                    unsigned int *readval)
 248 {
 249         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 250         unsigned int maxreg = RCAR_GYROADC_FIFO_STATUS;
 251
 252         if (readval == NULL)
 253                 return -EINVAL;
 254
 255         if (reg % 4)
 256                 return -EINVAL;
 257
 258         /* Handle the V2H case with extra interrupt block. */
 259         if (priv->model == RCAR_GYROADC_MODEL_R8A7792)
 260                 maxreg = RCAR_GYROADC_INTENR;
 261
 262         if (reg > maxreg)
 263                 return -EINVAL;
 264
 265         *readval = readl(priv->regs + reg);
 266
 267         return 0;
 268 }
 269
 270 static const struct iio_info rcar_gyroadc_iio_info = {
 271         .read_raw               = rcar_gyroadc_read_raw,
 272         .debugfs_reg_access     = rcar_gyroadc_reg_access,
 273 };
 274
 275 static const struct of_device_id rcar_gyroadc_match[] = {
 276         {
 277                 /* R-Car compatible GyroADC */
 278                 .compatible     = "renesas,rcar-gyroadc",
 279                 .data           = (void *)RCAR_GYROADC_MODEL_DEFAULT,
 280         }, {
 281                 /* R-Car V2H specialty with interrupt registers. */
 282                 .compatible     = "renesas,r8a7792-gyroadc",
 283                 .data           = (void *)RCAR_GYROADC_MODEL_R8A7792,
 284         }, {
 285                 /* sentinel */
 286         }
 287 };
 288
 289 MODULE_DEVICE_TABLE(of, rcar_gyroadc_match);
 290
 291 static const struct of_device_id rcar_gyroadc_child_match[] = {
 292         /* Mode 1 ADCs */
 293         {
 294                 .compatible     = "fujitsu,mb88101a",
 295                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_1_MB88101A,
 296         },
 297         /* Mode 2 ADCs */
 298         {
 299                 .compatible     = "ti,adcs7476",
 300                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_2_ADCS7476,
 301         }, {
 302                 .compatible     = "ti,adc121",
 303                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_2_ADCS7476,
 304         }, {
 305                 .compatible     = "adi,ad7476",
 306                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_2_ADCS7476,
 307         },
 308         /* Mode 3 ADCs */
 309         {
 310                 .compatible     = "maxim,max1162",
 311                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_3_MAX1162,
 312         }, {
 313                 .compatible     = "maxim,max11100",
 314                 .data           = (void *)RCAR_GYROADC_MODE_SELECT_3_MAX1162,
 315         },
 316         { /* sentinel */ }
 317 };
 318
 319 static int rcar_gyroadc_parse_subdevs(struct iio_dev *indio_dev)
 320 {
 321         const struct of_device_id *of_id;
 322         const struct iio_chan_spec *channels;
 323         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 324         struct device *dev = priv->dev;
 325         struct device_node *np = dev->of_node;
 326         struct device_node *child;
 327         struct regulator *vref;
 328         unsigned int reg;
 329         unsigned int adcmode = -1, childmode;
 330         unsigned int sample_width;
 331         unsigned int num_channels;
 332         int ret, first = 1;
 333
 334         for_each_child_of_node(np, child) {
 335                 of_id = of_match_node(rcar_gyroadc_child_match, child);
 336                 if (!of_id) {
 337                         dev_err(dev, "Ignoring unsupported ADC \"%pOFn\".",
 338                                 child);
 339                         continue;
 340                 }
 341
 342                 childmode = (uintptr_t)of_id->data;
 343                 switch (childmode) {
 344                 case RCAR_GYROADC_MODE_SELECT_1_MB88101A:
 345                         sample_width = 12;
 346                         channels = rcar_gyroadc_iio_channels_1;
 347                         num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_1);
 348                         break;
 349                 case RCAR_GYROADC_MODE_SELECT_2_ADCS7476:
 350                         sample_width = 15;
 351                         channels = rcar_gyroadc_iio_channels_2;
 352                         num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_2);
 353                         break;
 354                 case RCAR_GYROADC_MODE_SELECT_3_MAX1162:
 355                         sample_width = 16;
 356                         channels = rcar_gyroadc_iio_channels_3;
 357                         num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
 358                         break;
 359                 default:
 360                         goto err_e_inval;
 361                 }
 362
 363                 /*
 364                  * MB88101 is special in that it's only a single chip taking
 365                  * up all the CHS lines. Thus, the DT binding is also special
 366                  * and has no reg property. If we run into such ADC, handle
 367                  * it here.
 368                  */
 369                 if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
 370                         reg = 0;
 371                 } else {
 372                         ret = of_property_read_u32(child, "reg", &reg);
 373                         if (ret) {
 374                                 dev_err(dev,
 375                                         "Failed to get child reg property of ADC \"%pOFn\".\n",
 376                                         child);
 377                                 goto err_of_node_put;
 378                         }
 379
 380                         /* Channel number is too high. */
 381                         if (reg >= num_channels) {
 382                                 dev_err(dev,
 383                                         "Only %i channels supported with %pOFn, but reg = <%i>.\n",
 384                                         num_channels, child, reg);
 385                                 goto err_e_inval;
 386                         }
 387                 }
 388
 389                 /* Child node selected different mode than the rest. */
 390                 if (!first && (adcmode != childmode)) {
 391                         dev_err(dev,
 392                                 "Channel %i uses different ADC mode than the rest.\n",
 393                                 reg);
 394                         goto err_e_inval;
 395                 }
 396
 397                 /* Channel is valid, grab the regulator. */
 398                 dev->of_node = child;
 399                 vref = devm_regulator_get(dev, "vref");
 400                 dev->of_node = np;
 401                 if (IS_ERR(vref)) {
 402                         dev_dbg(dev, "Channel %i 'vref' supply not connected.\n",
 403                                 reg);
 404                         ret = PTR_ERR(vref);
 405                         goto err_of_node_put;
 406                 }
 407
 408                 priv->vref[reg] = vref;
 409
 410                 if (!first)
 411                         continue;
 412
 413                 /* First child node which passed sanity tests. */
 414                 adcmode = childmode;
 415                 first = 0;
 416
 417                 priv->num_channels = num_channels;
 418                 priv->mode = childmode;
 419                 priv->sample_width = sample_width;
 420
 421                 indio_dev->channels = channels;
 422                 indio_dev->num_channels = num_channels;
 423
 424                 /*
 425                  * MB88101 is special and we only have one such device
 426                  * attached to the GyroADC at a time, so if we found it,
 427                  * we can stop parsing here.
 428                  */
 429                 if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
 430                         of_node_put(child);
 431                         break;
 432                 }
 433         }
 434
 435         if (first) {
 436                 dev_err(dev, "No valid ADC channels found, aborting.\n");
 437                 return -EINVAL;
 438         }
 439
 440         return 0;
 441
 442 err_e_inval:
 443         ret = -EINVAL;
 444 err_of_node_put:
 445         of_node_put(child);
 446         return ret;
 447 }
 448
 449 static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
 450 {
 451         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 452         unsigned int i;
 453
 454         for (i = 0; i < priv->num_channels; i++) {
 455                 if (!priv->vref[i])
 456                         continue;
 457
 458                 regulator_disable(priv->vref[i]);
 459         }
 460 }
 461
 462 static int rcar_gyroadc_init_supplies(struct iio_dev *indio_dev)
 463 {
 464         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 465         struct device *dev = priv->dev;
 466         unsigned int i;
 467         int ret;
 468
 469         for (i = 0; i < priv->num_channels; i++) {
 470                 if (!priv->vref[i])
 471                         continue;
 472
 473                 ret = regulator_enable(priv->vref[i]);
 474                 if (ret) {
 475                         dev_err(dev, "Failed to enable regulator %i (ret=%i)\n",
 476                                 i, ret);
 477                         goto err;
 478                 }
 479         }
 480
 481         return 0;
 482
 483 err:
 484         rcar_gyroadc_deinit_supplies(indio_dev);
 485         return ret;
 486 }
 487
 488 static int rcar_gyroadc_probe(struct platform_device *pdev)
 489 {
 490         struct device *dev = &pdev->dev;
 491         struct rcar_gyroadc *priv;
 492         struct iio_dev *indio_dev;
 493         int ret;
 494
 495         indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
 496         if (!indio_dev)
 497                 return -ENOMEM;
 498
 499         priv = iio_priv(indio_dev);
 500         priv->dev = dev;
 501
 502         priv->regs = devm_platform_ioremap_resource(pdev, 0);
 503         if (IS_ERR(priv->regs))
 504                 return PTR_ERR(priv->regs);
 505
 506         priv->clk = devm_clk_get(dev, "fck");
 507         if (IS_ERR(priv->clk))
 508                 return dev_err_probe(dev, PTR_ERR(priv->clk),
 509                                      "Failed to get IF clock\n");
 510
 511         ret = rcar_gyroadc_parse_subdevs(indio_dev);
 512         if (ret)
 513                 return ret;
 514
 515         ret = rcar_gyroadc_init_supplies(indio_dev);
 516         if (ret)
 517                 return ret;
 518
 519         priv->model = (enum rcar_gyroadc_model)
 520                 of_device_get_match_data(&pdev->dev);
 521
 522         platform_set_drvdata(pdev, indio_dev);
 523
 524         indio_dev->name = DRIVER_NAME;
 525         indio_dev->info = &rcar_gyroadc_iio_info;
 526         indio_dev->modes = INDIO_DIRECT_MODE;
 527
 528         ret = clk_prepare_enable(priv->clk);
 529         if (ret) {
 530                 dev_err(dev, "Could not prepare or enable the IF clock.\n");
 531                 goto err_clk_if_enable;
 532         }
 533
 534         pm_runtime_set_autosuspend_delay(dev, RCAR_GYROADC_RUNTIME_PM_DELAY_MS);
 535         pm_runtime_use_autosuspend(dev);
 536         pm_runtime_enable(dev);
 537
 538         pm_runtime_get_sync(dev);
 539         rcar_gyroadc_hw_init(priv);
 540         rcar_gyroadc_hw_start(priv);
 541
 542         ret = iio_device_register(indio_dev);
 543         if (ret) {
 544                 dev_err(dev, "Couldn't register IIO device.\n");
 545                 goto err_iio_device_register;
 546         }
 547
 548         pm_runtime_put_sync(dev);
 549
 550         return 0;
 551
 552 err_iio_device_register:
 553         rcar_gyroadc_hw_stop(priv);
 554         pm_runtime_put_sync(dev);
 555         pm_runtime_disable(dev);
 556         pm_runtime_set_suspended(dev);
 557         clk_disable_unprepare(priv->clk);
 558 err_clk_if_enable:
 559         rcar_gyroadc_deinit_supplies(indio_dev);
 560
 561         return ret;
 562 }
 563
 564 static int rcar_gyroadc_remove(struct platform_device *pdev)
 565 {
 566         struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 567         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 568         struct device *dev = priv->dev;
 569
 570         iio_device_unregister(indio_dev);
 571         pm_runtime_get_sync(dev);
 572         rcar_gyroadc_hw_stop(priv);
 573         pm_runtime_put_sync(dev);
 574         pm_runtime_disable(dev);
 575         pm_runtime_set_suspended(dev);
 576         clk_disable_unprepare(priv->clk);
 577         rcar_gyroadc_deinit_supplies(indio_dev);
 578
 579         return 0;
 580 }
 581
 582 #if defined(CONFIG_PM)
 583 static int rcar_gyroadc_suspend(struct device *dev)
 584 {
 585         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 586         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 587
 588         rcar_gyroadc_hw_stop(priv);
 589
 590         return 0;
 591 }
 592
 593 static int rcar_gyroadc_resume(struct device *dev)
 594 {
 595         struct iio_dev *indio_dev = dev_get_drvdata(dev);
 596         struct rcar_gyroadc *priv = iio_priv(indio_dev);
 597
 598         rcar_gyroadc_hw_start(priv);
 599
 600         return 0;
 601 }
 602 #endif
 603
 604 static const struct dev_pm_ops rcar_gyroadc_pm_ops = {
 605         SET_RUNTIME_PM_OPS(rcar_gyroadc_suspend, rcar_gyroadc_resume, NULL)
 606 };
 607
 608 static struct platform_driver rcar_gyroadc_driver = {
 609         .probe          = rcar_gyroadc_probe,
 610         .remove         = rcar_gyroadc_remove,
 611         .driver         = {
 612                 .name           = DRIVER_NAME,
 613                 .of_match_table = rcar_gyroadc_match,
 614                 .pm             = &rcar_gyroadc_pm_ops,
 615         },
 616 };
 617
 618 module_platform_driver(rcar_gyroadc_driver);
 619
 620 MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
 621 MODULE_DESCRIPTION("Renesas R-Car GyroADC driver");
 622 MODULE_LICENSE("GPL");