Merge tag 'v4.20' into next
[linux-2.6-microblaze.git] / drivers / ide / ide-pm.c
1 // SPDX-License-Identifier: GPL-2.0
2 #include <linux/kernel.h>
3 #include <linux/gfp.h>
4 #include <linux/ide.h>
5
6 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
7 {
8         ide_drive_t *drive = to_ide_device(dev);
9         ide_drive_t *pair = ide_get_pair_dev(drive);
10         ide_hwif_t *hwif = drive->hwif;
11         struct request *rq;
12         struct ide_pm_state rqpm;
13         int ret;
14
15         if (ide_port_acpi(hwif)) {
16                 /* call ACPI _GTM only once */
17                 if ((drive->dn & 1) == 0 || pair == NULL)
18                         ide_acpi_get_timing(hwif);
19         }
20
21         memset(&rqpm, 0, sizeof(rqpm));
22         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, 0);
23         ide_req(rq)->type = ATA_PRIV_PM_SUSPEND;
24         rq->special = &rqpm;
25         rqpm.pm_step = IDE_PM_START_SUSPEND;
26         if (mesg.event == PM_EVENT_PRETHAW)
27                 mesg.event = PM_EVENT_FREEZE;
28         rqpm.pm_state = mesg.event;
29
30         blk_execute_rq(drive->queue, NULL, rq, 0);
31         ret = scsi_req(rq)->result ? -EIO : 0;
32         blk_put_request(rq);
33
34         if (ret == 0 && ide_port_acpi(hwif)) {
35                 /* call ACPI _PS3 only after both devices are suspended */
36                 if ((drive->dn & 1) || pair == NULL)
37                         ide_acpi_set_state(hwif, 0);
38         }
39
40         return ret;
41 }
42
43 static void ide_end_sync_rq(struct request *rq, blk_status_t error)
44 {
45         complete(rq->end_io_data);
46 }
47
48 static int ide_pm_execute_rq(struct request *rq)
49 {
50         struct request_queue *q = rq->q;
51         DECLARE_COMPLETION_ONSTACK(wait);
52
53         rq->end_io_data = &wait;
54         rq->end_io = ide_end_sync_rq;
55
56         spin_lock_irq(q->queue_lock);
57         if (unlikely(blk_queue_dying(q))) {
58                 rq->rq_flags |= RQF_QUIET;
59                 scsi_req(rq)->result = -ENXIO;
60                 __blk_end_request_all(rq, BLK_STS_OK);
61                 spin_unlock_irq(q->queue_lock);
62                 return -ENXIO;
63         }
64         __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT);
65         __blk_run_queue_uncond(q);
66         spin_unlock_irq(q->queue_lock);
67
68         wait_for_completion_io(&wait);
69
70         return scsi_req(rq)->result ? -EIO : 0;
71 }
72
73 int generic_ide_resume(struct device *dev)
74 {
75         ide_drive_t *drive = to_ide_device(dev);
76         ide_drive_t *pair = ide_get_pair_dev(drive);
77         ide_hwif_t *hwif = drive->hwif;
78         struct request *rq;
79         struct ide_pm_state rqpm;
80         int err;
81
82         if (ide_port_acpi(hwif)) {
83                 /* call ACPI _PS0 / _STM only once */
84                 if ((drive->dn & 1) == 0 || pair == NULL) {
85                         ide_acpi_set_state(hwif, 1);
86                         ide_acpi_push_timing(hwif);
87                 }
88
89                 ide_acpi_exec_tfs(drive);
90         }
91
92         memset(&rqpm, 0, sizeof(rqpm));
93         rq = blk_get_request(drive->queue, REQ_OP_DRV_IN, BLK_MQ_REQ_PREEMPT);
94         ide_req(rq)->type = ATA_PRIV_PM_RESUME;
95         rq->special = &rqpm;
96         rqpm.pm_step = IDE_PM_START_RESUME;
97         rqpm.pm_state = PM_EVENT_ON;
98
99         err = ide_pm_execute_rq(rq);
100         blk_put_request(rq);
101
102         if (err == 0 && dev->driver) {
103                 struct ide_driver *drv = to_ide_driver(dev->driver);
104
105                 if (drv->resume)
106                         drv->resume(drive);
107         }
108
109         return err;
110 }
111
112 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
113 {
114         struct ide_pm_state *pm = rq->special;
115
116 #ifdef DEBUG_PM
117         printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
118                 drive->name, pm->pm_step);
119 #endif
120         if (drive->media != ide_disk)
121                 return;
122
123         switch (pm->pm_step) {
124         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
125                 if (pm->pm_state == PM_EVENT_FREEZE)
126                         pm->pm_step = IDE_PM_COMPLETED;
127                 else
128                         pm->pm_step = IDE_PM_STANDBY;
129                 break;
130         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
131                 pm->pm_step = IDE_PM_COMPLETED;
132                 break;
133         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
134                 pm->pm_step = IDE_PM_IDLE;
135                 break;
136         case IDE_PM_IDLE:               /* Resume step 2 (idle)*/
137                 pm->pm_step = IDE_PM_RESTORE_DMA;
138                 break;
139         }
140 }
141
142 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
143 {
144         struct ide_pm_state *pm = rq->special;
145         struct ide_cmd cmd = { };
146
147         switch (pm->pm_step) {
148         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
149                 if (drive->media != ide_disk)
150                         break;
151                 /* Not supported? Switch to next step now. */
152                 if (ata_id_flush_enabled(drive->id) == 0 ||
153                     (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
154                         ide_complete_power_step(drive, rq);
155                         return ide_stopped;
156                 }
157                 if (ata_id_flush_ext_enabled(drive->id))
158                         cmd.tf.command = ATA_CMD_FLUSH_EXT;
159                 else
160                         cmd.tf.command = ATA_CMD_FLUSH;
161                 goto out_do_tf;
162         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
163                 cmd.tf.command = ATA_CMD_STANDBYNOW1;
164                 goto out_do_tf;
165         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
166                 ide_set_max_pio(drive);
167                 /*
168                  * skip IDE_PM_IDLE for ATAPI devices
169                  */
170                 if (drive->media != ide_disk)
171                         pm->pm_step = IDE_PM_RESTORE_DMA;
172                 else
173                         ide_complete_power_step(drive, rq);
174                 return ide_stopped;
175         case IDE_PM_IDLE:               /* Resume step 2 (idle) */
176                 cmd.tf.command = ATA_CMD_IDLEIMMEDIATE;
177                 goto out_do_tf;
178         case IDE_PM_RESTORE_DMA:        /* Resume step 3 (restore DMA) */
179                 /*
180                  * Right now, all we do is call ide_set_dma(drive),
181                  * we could be smarter and check for current xfer_speed
182                  * in struct drive etc...
183                  */
184                 if (drive->hwif->dma_ops == NULL)
185                         break;
186                 /*
187                  * TODO: respect IDE_DFLAG_USING_DMA
188                  */
189                 ide_set_dma(drive);
190                 break;
191         }
192
193         pm->pm_step = IDE_PM_COMPLETED;
194
195         return ide_stopped;
196
197 out_do_tf:
198         cmd.valid.out.tf = IDE_VALID_OUT_TF | IDE_VALID_DEVICE;
199         cmd.valid.in.tf  = IDE_VALID_IN_TF  | IDE_VALID_DEVICE;
200         cmd.protocol = ATA_PROT_NODATA;
201
202         return do_rw_taskfile(drive, &cmd);
203 }
204
205 /**
206  *      ide_complete_pm_rq - end the current Power Management request
207  *      @drive: target drive
208  *      @rq: request
209  *
210  *      This function cleans up the current PM request and stops the queue
211  *      if necessary.
212  */
213 void ide_complete_pm_rq(ide_drive_t *drive, struct request *rq)
214 {
215         struct request_queue *q = drive->queue;
216         struct ide_pm_state *pm = rq->special;
217         unsigned long flags;
218
219         ide_complete_power_step(drive, rq);
220         if (pm->pm_step != IDE_PM_COMPLETED)
221                 return;
222
223 #ifdef DEBUG_PM
224         printk("%s: completing PM request, %s\n", drive->name,
225                (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND) ? "suspend" : "resume");
226 #endif
227         spin_lock_irqsave(q->queue_lock, flags);
228         if (ide_req(rq)->type == ATA_PRIV_PM_SUSPEND)
229                 blk_stop_queue(q);
230         else
231                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
232         spin_unlock_irqrestore(q->queue_lock, flags);
233
234         drive->hwif->rq = NULL;
235
236         if (blk_end_request(rq, BLK_STS_OK, 0))
237                 BUG();
238 }
239
240 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
241 {
242         struct ide_pm_state *pm = rq->special;
243
244         if (blk_rq_is_private(rq) &&
245             ide_req(rq)->type == ATA_PRIV_PM_SUSPEND &&
246             pm->pm_step == IDE_PM_START_SUSPEND)
247                 /* Mark drive blocked when starting the suspend sequence. */
248                 drive->dev_flags |= IDE_DFLAG_BLOCKED;
249         else if (blk_rq_is_private(rq) &&
250                  ide_req(rq)->type == ATA_PRIV_PM_RESUME &&
251                  pm->pm_step == IDE_PM_START_RESUME) {
252                 /*
253                  * The first thing we do on wakeup is to wait for BSY bit to
254                  * go away (with a looong timeout) as a drive on this hwif may
255                  * just be POSTing itself.
256                  * We do that before even selecting as the "other" device on
257                  * the bus may be broken enough to walk on our toes at this
258                  * point.
259                  */
260                 ide_hwif_t *hwif = drive->hwif;
261                 const struct ide_tp_ops *tp_ops = hwif->tp_ops;
262                 struct request_queue *q = drive->queue;
263                 unsigned long flags;
264                 int rc;
265 #ifdef DEBUG_PM
266                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
267 #endif
268                 rc = ide_wait_not_busy(hwif, 35000);
269                 if (rc)
270                         printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
271                 tp_ops->dev_select(drive);
272                 tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS);
273                 rc = ide_wait_not_busy(hwif, 100000);
274                 if (rc)
275                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
276
277                 spin_lock_irqsave(q->queue_lock, flags);
278                 blk_start_queue(q);
279                 spin_unlock_irqrestore(q->queue_lock, flags);
280         }
281 }