drm/amd/display: [FW Promotion] Release 0.0.47
[linux-2.6-microblaze.git] / drivers / ide / cs5535.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
4  * Copyright (C)      2007 Bartlomiej Zolnierkiewicz
5  *
6  * History:
7  * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
8  * - Reworked tuneproc, set_drive, misc mods to prep for mainline
9  * - Work was sponsored by CIS (M) Sdn Bhd.
10  * Ported to Kernel 2.6.11 on June 26, 2005 by
11  *   Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
12  *   Alexander Kiausch <alex.kiausch@t-online.de>
13  * Originally developed by AMD for 2.4/2.6
14  *
15  * Development of this chipset driver was funded
16  * by the nice folks at National Semiconductor/AMD.
17  *
18  * Documentation:
19  *  CS5535 documentation available from AMD
20  */
21
22 #include <linux/module.h>
23 #include <linux/pci.h>
24 #include <linux/ide.h>
25
26 #define DRV_NAME "cs5535"
27
28 #define MSR_ATAC_BASE           0x51300000
29 #define ATAC_GLD_MSR_CAP        (MSR_ATAC_BASE+0)
30 #define ATAC_GLD_MSR_CONFIG     (MSR_ATAC_BASE+0x01)
31 #define ATAC_GLD_MSR_SMI        (MSR_ATAC_BASE+0x02)
32 #define ATAC_GLD_MSR_ERROR      (MSR_ATAC_BASE+0x03)
33 #define ATAC_GLD_MSR_PM         (MSR_ATAC_BASE+0x04)
34 #define ATAC_GLD_MSR_DIAG       (MSR_ATAC_BASE+0x05)
35 #define ATAC_IO_BAR             (MSR_ATAC_BASE+0x08)
36 #define ATAC_RESET              (MSR_ATAC_BASE+0x10)
37 #define ATAC_CH0D0_PIO          (MSR_ATAC_BASE+0x20)
38 #define ATAC_CH0D0_DMA          (MSR_ATAC_BASE+0x21)
39 #define ATAC_CH0D1_PIO          (MSR_ATAC_BASE+0x22)
40 #define ATAC_CH0D1_DMA          (MSR_ATAC_BASE+0x23)
41 #define ATAC_PCI_ABRTERR        (MSR_ATAC_BASE+0x24)
42 #define ATAC_BM0_CMD_PRIM       0x00
43 #define ATAC_BM0_STS_PRIM       0x02
44 #define ATAC_BM0_PRD            0x04
45 #define CS5535_CABLE_DETECT     0x48
46
47 /* Format I PIO settings. We separate out cmd and data for safer timings */
48
49 static unsigned int cs5535_pio_cmd_timings[5] =
50 { 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
51 static unsigned int cs5535_pio_dta_timings[5] =
52 { 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
53
54 static unsigned int cs5535_mwdma_timings[3] =
55 { 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
56
57 static unsigned int cs5535_udma_timings[5] =
58 { 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
59
60 /* Macros to check if the register is the reset value -  reset value is an
61    invalid timing and indicates the register has not been set previously */
62
63 #define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
64 #define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
65
66 /****
67  *      cs5535_set_speed         -     Configure the chipset to the new speed
68  *      @drive: Drive to set up
69  *      @speed: desired speed
70  *
71  *      cs5535_set_speed() configures the chipset to a new speed.
72  */
73 static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
74 {
75         u32 reg = 0, dummy;
76         u8 unit = drive->dn & 1;
77
78         /* Set the PIO timings */
79         if (speed < XFER_SW_DMA_0) {
80                 ide_drive_t *pair = ide_get_pair_dev(drive);
81                 u8 cmd, pioa;
82
83                 cmd = pioa = speed - XFER_PIO_0;
84
85                 if (pair) {
86                         u8 piob = pair->pio_mode - XFER_PIO_0;
87
88                         if (piob < cmd)
89                                 cmd = piob;
90                 }
91
92                 /* Write the speed of the current drive */
93                 reg = (cs5535_pio_cmd_timings[cmd] << 16) |
94                         cs5535_pio_dta_timings[pioa];
95                 wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
96
97                 /* And if nessesary - change the speed of the other drive */
98                 rdmsr(unit ?  ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
99
100                 if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
101                         cs5535_pio_cmd_timings[cmd]) {
102                         reg &= 0x0000FFFF;
103                         reg |= cs5535_pio_cmd_timings[cmd] << 16;
104                         wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
105                 }
106
107                 /* Set bit 31 of the DMA register for PIO format 1 timings */
108                 rdmsr(unit ?  ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
109                 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
110                                         reg | 0x80000000UL, 0);
111         } else {
112                 rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
113
114                 reg &= 0x80000000UL;  /* Preserve the PIO format bit */
115
116                 if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
117                         reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
118                 else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
119                         reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
120                 else
121                         return;
122
123                 wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
124         }
125 }
126
127 /**
128  *      cs5535_set_dma_mode     -       set host controller for DMA mode
129  *      @hwif: port
130  *      @drive: drive
131  *
132  *      Programs the chipset for DMA mode.
133  */
134
135 static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
136 {
137         cs5535_set_speed(drive, drive->dma_mode);
138 }
139
140 /**
141  *      cs5535_set_pio_mode     -       set host controller for PIO mode
142  *      @hwif: port
143  *      @drive: drive
144  *
145  *      A callback from the upper layers for PIO-only tuning.
146  */
147
148 static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
149 {
150         cs5535_set_speed(drive, drive->pio_mode);
151 }
152
153 static u8 cs5535_cable_detect(ide_hwif_t *hwif)
154 {
155         struct pci_dev *dev = to_pci_dev(hwif->dev);
156         u8 bit;
157
158         /* if a 80 wire cable was detected */
159         pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
160
161         return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
162 }
163
164 static const struct ide_port_ops cs5535_port_ops = {
165         .set_pio_mode           = cs5535_set_pio_mode,
166         .set_dma_mode           = cs5535_set_dma_mode,
167         .cable_detect           = cs5535_cable_detect,
168 };
169
170 static const struct ide_port_info cs5535_chipset = {
171         .name           = DRV_NAME,
172         .port_ops       = &cs5535_port_ops,
173         .host_flags     = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
174         .pio_mask       = ATA_PIO4,
175         .mwdma_mask     = ATA_MWDMA2,
176         .udma_mask      = ATA_UDMA4,
177 };
178
179 static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
180 {
181         return ide_pci_init_one(dev, &cs5535_chipset, NULL);
182 }
183
184 static const struct pci_device_id cs5535_pci_tbl[] = {
185         { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
186         { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
187         { 0, },
188 };
189
190 MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
191
192 static struct pci_driver cs5535_pci_driver = {
193         .name           = "CS5535_IDE",
194         .id_table       = cs5535_pci_tbl,
195         .probe          = cs5535_init_one,
196         .remove         = ide_pci_remove,
197         .suspend        = ide_pci_suspend,
198         .resume         = ide_pci_resume,
199 };
200
201 static int __init cs5535_ide_init(void)
202 {
203         return ide_pci_register_driver(&cs5535_pci_driver);
204 }
205
206 static void __exit cs5535_ide_exit(void)
207 {
208         pci_unregister_driver(&cs5535_pci_driver);
209 }
210
211 module_init(cs5535_ide_init);
212 module_exit(cs5535_ide_exit);
213
214 MODULE_AUTHOR("AMD");
215 MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
216 MODULE_LICENSE("GPL");