Linux 6.9-rc1
[linux-2.6-microblaze.git] / drivers / hwspinlock / omap_hwspinlock.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * OMAP hardware spinlock driver
4  *
5  * Copyright (C) 2010-2021 Texas Instruments Incorporated - https://www.ti.com
6  *
7  * Contact: Simon Que <sque@ti.com>
8  *          Hari Kanigeri <h-kanigeri2@ti.com>
9  *          Ohad Ben-Cohen <ohad@wizery.com>
10  *          Suman Anna <s-anna@ti.com>
11  */
12
13 #include <linux/kernel.h>
14 #include <linux/module.h>
15 #include <linux/device.h>
16 #include <linux/delay.h>
17 #include <linux/io.h>
18 #include <linux/bitops.h>
19 #include <linux/pm_runtime.h>
20 #include <linux/slab.h>
21 #include <linux/spinlock.h>
22 #include <linux/hwspinlock.h>
23 #include <linux/of.h>
24 #include <linux/platform_device.h>
25
26 #include "hwspinlock_internal.h"
27
28 /* Spinlock register offsets */
29 #define SYSSTATUS_OFFSET                0x0014
30 #define LOCK_BASE_OFFSET                0x0800
31
32 #define SPINLOCK_NUMLOCKS_BIT_OFFSET    (24)
33
34 /* Possible values of SPINLOCK_LOCK_REG */
35 #define SPINLOCK_NOTTAKEN               (0)     /* free */
36 #define SPINLOCK_TAKEN                  (1)     /* locked */
37
38 static int omap_hwspinlock_trylock(struct hwspinlock *lock)
39 {
40         void __iomem *lock_addr = lock->priv;
41
42         /* attempt to acquire the lock by reading its value */
43         return (SPINLOCK_NOTTAKEN == readl(lock_addr));
44 }
45
46 static void omap_hwspinlock_unlock(struct hwspinlock *lock)
47 {
48         void __iomem *lock_addr = lock->priv;
49
50         /* release the lock by writing 0 to it */
51         writel(SPINLOCK_NOTTAKEN, lock_addr);
52 }
53
54 /*
55  * relax the OMAP interconnect while spinning on it.
56  *
57  * The specs recommended that the retry delay time will be
58  * just over half of the time that a requester would be
59  * expected to hold the lock.
60  *
61  * The number below is taken from an hardware specs example,
62  * obviously it is somewhat arbitrary.
63  */
64 static void omap_hwspinlock_relax(struct hwspinlock *lock)
65 {
66         ndelay(50);
67 }
68
69 static const struct hwspinlock_ops omap_hwspinlock_ops = {
70         .trylock = omap_hwspinlock_trylock,
71         .unlock = omap_hwspinlock_unlock,
72         .relax = omap_hwspinlock_relax,
73 };
74
75 static int omap_hwspinlock_probe(struct platform_device *pdev)
76 {
77         struct device_node *node = pdev->dev.of_node;
78         struct hwspinlock_device *bank;
79         struct hwspinlock *hwlock;
80         void __iomem *io_base;
81         int num_locks, i, ret;
82         /* Only a single hwspinlock block device is supported */
83         int base_id = 0;
84
85         if (!node)
86                 return -ENODEV;
87
88         io_base = devm_platform_ioremap_resource(pdev, 0);
89         if (IS_ERR(io_base))
90                 return PTR_ERR(io_base);
91
92         /*
93          * make sure the module is enabled and clocked before reading
94          * the module SYSSTATUS register
95          */
96         pm_runtime_enable(&pdev->dev);
97         ret = pm_runtime_get_sync(&pdev->dev);
98         if (ret < 0) {
99                 pm_runtime_put_noidle(&pdev->dev);
100                 goto runtime_err;
101         }
102
103         /* Determine number of locks */
104         i = readl(io_base + SYSSTATUS_OFFSET);
105         i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
106
107         /*
108          * runtime PM will make sure the clock of this module is
109          * enabled again iff at least one lock is requested
110          */
111         ret = pm_runtime_put(&pdev->dev);
112         if (ret < 0)
113                 goto runtime_err;
114
115         /* one of the four lsb's must be set, and nothing else */
116         if (hweight_long(i & 0xf) != 1 || i > 8) {
117                 ret = -EINVAL;
118                 goto runtime_err;
119         }
120
121         num_locks = i * 32; /* actual number of locks in this device */
122
123         bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
124                             GFP_KERNEL);
125         if (!bank) {
126                 ret = -ENOMEM;
127                 goto runtime_err;
128         }
129
130         platform_set_drvdata(pdev, bank);
131
132         for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
133                 hwlock->priv = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
134
135         ret = hwspin_lock_register(bank, &pdev->dev, &omap_hwspinlock_ops,
136                                                 base_id, num_locks);
137         if (ret)
138                 goto runtime_err;
139
140         dev_dbg(&pdev->dev, "Registered %d locks with HwSpinlock core\n",
141                 num_locks);
142
143         return 0;
144
145 runtime_err:
146         pm_runtime_disable(&pdev->dev);
147         return ret;
148 }
149
150 static int omap_hwspinlock_remove(struct platform_device *pdev)
151 {
152         struct hwspinlock_device *bank = platform_get_drvdata(pdev);
153         int ret;
154
155         ret = hwspin_lock_unregister(bank);
156         if (ret) {
157                 dev_err(&pdev->dev, "%s failed: %d\n", __func__, ret);
158                 return ret;
159         }
160
161         pm_runtime_disable(&pdev->dev);
162
163         return 0;
164 }
165
166 static const struct of_device_id omap_hwspinlock_of_match[] = {
167         { .compatible = "ti,omap4-hwspinlock", },
168         { .compatible = "ti,am64-hwspinlock", },
169         { .compatible = "ti,am654-hwspinlock", },
170         { /* end */ },
171 };
172 MODULE_DEVICE_TABLE(of, omap_hwspinlock_of_match);
173
174 static struct platform_driver omap_hwspinlock_driver = {
175         .probe          = omap_hwspinlock_probe,
176         .remove         = omap_hwspinlock_remove,
177         .driver         = {
178                 .name   = "omap_hwspinlock",
179                 .of_match_table = of_match_ptr(omap_hwspinlock_of_match),
180         },
181 };
182
183 static int __init omap_hwspinlock_init(void)
184 {
185         return platform_driver_register(&omap_hwspinlock_driver);
186 }
187 /* board init code might need to reserve hwspinlocks for predefined purposes */
188 postcore_initcall(omap_hwspinlock_init);
189
190 static void __exit omap_hwspinlock_exit(void)
191 {
192         platform_driver_unregister(&omap_hwspinlock_driver);
193 }
194 module_exit(omap_hwspinlock_exit);
195
196 MODULE_LICENSE("GPL v2");
197 MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
198 MODULE_AUTHOR("Simon Que <sque@ti.com>");
199 MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
200 MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");