49e6c93862587c301ac1f2988f87c7947bbc4db8
[linux-2.6-microblaze.git] / drivers / gpu / drm / panel / panel-tpo-td043mtea1.c
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Toppoly TD043MTEA1 Panel Driver
4  *
5  * Copyright (C) 2019 Texas Instruments Incorporated
6  *
7  * Based on the omapdrm-specific panel-tpo-td043mtea1 driver
8  *
9  * Author: Gražvydas Ignotas <notasas@gmail.com>
10  */
11
12 #include <linux/delay.h>
13 #include <linux/module.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/spi/spi.h>
16
17 #include <drm/drm_connector.h>
18 #include <drm/drm_modes.h>
19 #include <drm/drm_panel.h>
20
21 #define TPO_R02_MODE(x)                 ((x) & 7)
22 #define TPO_R02_MODE_800x480            7
23 #define TPO_R02_NCLK_RISING             BIT(3)
24 #define TPO_R02_HSYNC_HIGH              BIT(4)
25 #define TPO_R02_VSYNC_HIGH              BIT(5)
26
27 #define TPO_R03_NSTANDBY                BIT(0)
28 #define TPO_R03_EN_CP_CLK               BIT(1)
29 #define TPO_R03_EN_VGL_PUMP             BIT(2)
30 #define TPO_R03_EN_PWM                  BIT(3)
31 #define TPO_R03_DRIVING_CAP_100         BIT(4)
32 #define TPO_R03_EN_PRE_CHARGE           BIT(6)
33 #define TPO_R03_SOFTWARE_CTL            BIT(7)
34
35 #define TPO_R04_NFLIP_H                 BIT(0)
36 #define TPO_R04_NFLIP_V                 BIT(1)
37 #define TPO_R04_CP_CLK_FREQ_1H          BIT(2)
38 #define TPO_R04_VGL_FREQ_1H             BIT(4)
39
40 #define TPO_R03_VAL_NORMAL \
41         (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | TPO_R03_EN_VGL_PUMP | \
42          TPO_R03_EN_PWM | TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
43          TPO_R03_SOFTWARE_CTL)
44
45 #define TPO_R03_VAL_STANDBY \
46         (TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
47          TPO_R03_SOFTWARE_CTL)
48
49 static const u16 td043mtea1_def_gamma[12] = {
50         105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
51 };
52
53 struct td043mtea1_panel {
54         struct drm_panel panel;
55
56         struct spi_device *spi;
57         struct regulator *vcc_reg;
58         struct gpio_desc *reset_gpio;
59
60         unsigned int mode;
61         u16 gamma[12];
62         bool vmirror;
63         bool powered_on;
64         bool spi_suspended;
65         bool power_on_resume;
66 };
67
68 #define to_td043mtea1_device(p) container_of(p, struct td043mtea1_panel, panel)
69
70 /* -----------------------------------------------------------------------------
71  * Hardware Access
72  */
73
74 static int td043mtea1_write(struct td043mtea1_panel *lcd, u8 addr, u8 value)
75 {
76         struct spi_message msg;
77         struct spi_transfer xfer;
78         u16 data;
79         int ret;
80
81         spi_message_init(&msg);
82
83         memset(&xfer, 0, sizeof(xfer));
84
85         data = ((u16)addr << 10) | (1 << 8) | value;
86         xfer.tx_buf = &data;
87         xfer.bits_per_word = 16;
88         xfer.len = 2;
89         spi_message_add_tail(&xfer, &msg);
90
91         ret = spi_sync(lcd->spi, &msg);
92         if (ret < 0)
93                 dev_warn(&lcd->spi->dev, "failed to write to LCD reg (%d)\n",
94                          ret);
95
96         return ret;
97 }
98
99 static void td043mtea1_write_gamma(struct td043mtea1_panel *lcd)
100 {
101         const u16 *gamma = lcd->gamma;
102         unsigned int i;
103         u8 val;
104
105         /* gamma bits [9:8] */
106         for (val = i = 0; i < 4; i++)
107                 val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
108         td043mtea1_write(lcd, 0x11, val);
109
110         for (val = i = 0; i < 4; i++)
111                 val |= (gamma[i + 4] & 0x300) >> ((i + 1) * 2);
112         td043mtea1_write(lcd, 0x12, val);
113
114         for (val = i = 0; i < 4; i++)
115                 val |= (gamma[i + 8] & 0x300) >> ((i + 1) * 2);
116         td043mtea1_write(lcd, 0x13, val);
117
118         /* gamma bits [7:0] */
119         for (i = 0; i < 12; i++)
120                 td043mtea1_write(lcd, 0x14 + i, gamma[i] & 0xff);
121 }
122
123 static int td043mtea1_write_mirror(struct td043mtea1_panel *lcd)
124 {
125         u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
126                 TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
127         if (lcd->vmirror)
128                 reg4 &= ~TPO_R04_NFLIP_V;
129
130         return td043mtea1_write(lcd, 4, reg4);
131 }
132
133 static int td043mtea1_power_on(struct td043mtea1_panel *lcd)
134 {
135         int ret;
136
137         if (lcd->powered_on)
138                 return 0;
139
140         ret = regulator_enable(lcd->vcc_reg);
141         if (ret < 0)
142                 return ret;
143
144         /* Wait for the panel to stabilize. */
145         msleep(160);
146
147         gpiod_set_value(lcd->reset_gpio, 0);
148
149         td043mtea1_write(lcd, 2, TPO_R02_MODE(lcd->mode) | TPO_R02_NCLK_RISING);
150         td043mtea1_write(lcd, 3, TPO_R03_VAL_NORMAL);
151         td043mtea1_write(lcd, 0x20, 0xf0);
152         td043mtea1_write(lcd, 0x21, 0xf0);
153         td043mtea1_write_mirror(lcd);
154         td043mtea1_write_gamma(lcd);
155
156         lcd->powered_on = true;
157
158         return 0;
159 }
160
161 static void td043mtea1_power_off(struct td043mtea1_panel *lcd)
162 {
163         if (!lcd->powered_on)
164                 return;
165
166         td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
167
168         gpiod_set_value(lcd->reset_gpio, 1);
169
170         /* wait for at least 2 vsyncs before cutting off power */
171         msleep(50);
172
173         td043mtea1_write(lcd, 3, TPO_R03_VAL_STANDBY);
174
175         regulator_disable(lcd->vcc_reg);
176
177         lcd->powered_on = false;
178 }
179
180 /* -----------------------------------------------------------------------------
181  * sysfs
182  */
183
184 static ssize_t vmirror_show(struct device *dev, struct device_attribute *attr,
185                             char *buf)
186 {
187         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
188
189         return snprintf(buf, PAGE_SIZE, "%d\n", lcd->vmirror);
190 }
191
192 static ssize_t vmirror_store(struct device *dev, struct device_attribute *attr,
193                              const char *buf, size_t count)
194 {
195         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
196         int val;
197         int ret;
198
199         ret = kstrtoint(buf, 0, &val);
200         if (ret < 0)
201                 return ret;
202
203         lcd->vmirror = !!val;
204
205         ret = td043mtea1_write_mirror(lcd);
206         if (ret < 0)
207                 return ret;
208
209         return count;
210 }
211
212 static ssize_t mode_show(struct device *dev, struct device_attribute *attr,
213                          char *buf)
214 {
215         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
216
217         return snprintf(buf, PAGE_SIZE, "%d\n", lcd->mode);
218 }
219
220 static ssize_t mode_store(struct device *dev, struct device_attribute *attr,
221                           const char *buf, size_t count)
222 {
223         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
224         long val;
225         int ret;
226
227         ret = kstrtol(buf, 0, &val);
228         if (ret != 0 || val & ~7)
229                 return -EINVAL;
230
231         lcd->mode = val;
232
233         val |= TPO_R02_NCLK_RISING;
234         td043mtea1_write(lcd, 2, val);
235
236         return count;
237 }
238
239 static ssize_t gamma_show(struct device *dev, struct device_attribute *attr,
240                           char *buf)
241 {
242         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
243         ssize_t len = 0;
244         unsigned int i;
245         int ret;
246
247         for (i = 0; i < ARRAY_SIZE(lcd->gamma); i++) {
248                 ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
249                                lcd->gamma[i]);
250                 if (ret < 0)
251                         return ret;
252                 len += ret;
253         }
254         buf[len - 1] = '\n';
255
256         return len;
257 }
258
259 static ssize_t gamma_store(struct device *dev, struct device_attribute *attr,
260                            const char *buf, size_t count)
261 {
262         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
263         unsigned int g[12];
264         unsigned int i;
265         int ret;
266
267         ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
268                      &g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
269                      &g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
270         if (ret != 12)
271                 return -EINVAL;
272
273         for (i = 0; i < 12; i++)
274                 lcd->gamma[i] = g[i];
275
276         td043mtea1_write_gamma(lcd);
277
278         return count;
279 }
280
281 static DEVICE_ATTR_RW(vmirror);
282 static DEVICE_ATTR_RW(mode);
283 static DEVICE_ATTR_RW(gamma);
284
285 static struct attribute *td043mtea1_attrs[] = {
286         &dev_attr_vmirror.attr,
287         &dev_attr_mode.attr,
288         &dev_attr_gamma.attr,
289         NULL,
290 };
291
292 static const struct attribute_group td043mtea1_attr_group = {
293         .attrs = td043mtea1_attrs,
294 };
295
296 /* -----------------------------------------------------------------------------
297  * Panel Operations
298  */
299
300 static int td043mtea1_unprepare(struct drm_panel *panel)
301 {
302         struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
303
304         if (!lcd->spi_suspended)
305                 td043mtea1_power_off(lcd);
306
307         return 0;
308 }
309
310 static int td043mtea1_prepare(struct drm_panel *panel)
311 {
312         struct td043mtea1_panel *lcd = to_td043mtea1_device(panel);
313         int ret;
314
315         /*
316          * If we are resuming from system suspend, SPI might not be enabled
317          * yet, so we'll program the LCD from SPI PM resume callback.
318          */
319         if (lcd->spi_suspended)
320                 return 0;
321
322         ret = td043mtea1_power_on(lcd);
323         if (ret) {
324                 dev_err(&lcd->spi->dev, "%s: power on failed (%d)\n",
325                         __func__, ret);
326                 return ret;
327         }
328
329         return 0;
330 }
331
332 static const struct drm_display_mode td043mtea1_mode = {
333         .clock = 36000,
334         .hdisplay = 800,
335         .hsync_start = 800 + 68,
336         .hsync_end = 800 + 68 + 1,
337         .htotal = 800 + 68 + 1 + 214,
338         .vdisplay = 480,
339         .vsync_start = 480 + 39,
340         .vsync_end = 480 + 39 + 1,
341         .vtotal = 480 + 39 + 1 + 34,
342         .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
343         .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
344         .width_mm = 94,
345         .height_mm = 56,
346 };
347
348 static int td043mtea1_get_modes(struct drm_panel *panel,
349                                 struct drm_connector *connector)
350 {
351         struct drm_display_mode *mode;
352
353         mode = drm_mode_duplicate(connector->dev, &td043mtea1_mode);
354         if (!mode)
355                 return -ENOMEM;
356
357         drm_mode_set_name(mode);
358         drm_mode_probed_add(connector, mode);
359
360         connector->display_info.width_mm = td043mtea1_mode.width_mm;
361         connector->display_info.height_mm = td043mtea1_mode.height_mm;
362         /*
363          * FIXME: According to the datasheet sync signals are sampled on the
364          * rising edge of the clock, but the code running on the OMAP3 Pandora
365          * indicates sampling on the falling edge. This should be tested on a
366          * real device.
367          */
368         connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
369                                           | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
370                                           | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE;
371
372         return 1;
373 }
374
375 static const struct drm_panel_funcs td043mtea1_funcs = {
376         .unprepare = td043mtea1_unprepare,
377         .prepare = td043mtea1_prepare,
378         .get_modes = td043mtea1_get_modes,
379 };
380
381 /* -----------------------------------------------------------------------------
382  * Power Management, Probe and Remove
383  */
384
385 static int __maybe_unused td043mtea1_suspend(struct device *dev)
386 {
387         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
388
389         if (lcd->powered_on) {
390                 td043mtea1_power_off(lcd);
391                 lcd->powered_on = true;
392         }
393
394         lcd->spi_suspended = true;
395
396         return 0;
397 }
398
399 static int __maybe_unused td043mtea1_resume(struct device *dev)
400 {
401         struct td043mtea1_panel *lcd = dev_get_drvdata(dev);
402         int ret;
403
404         lcd->spi_suspended = false;
405
406         if (lcd->powered_on) {
407                 lcd->powered_on = false;
408                 ret = td043mtea1_power_on(lcd);
409                 if (ret)
410                         return ret;
411         }
412
413         return 0;
414 }
415
416 static SIMPLE_DEV_PM_OPS(td043mtea1_pm_ops, td043mtea1_suspend,
417                          td043mtea1_resume);
418
419 static int td043mtea1_probe(struct spi_device *spi)
420 {
421         struct td043mtea1_panel *lcd;
422         int ret;
423
424         lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
425         if (lcd == NULL)
426                 return -ENOMEM;
427
428         spi_set_drvdata(spi, lcd);
429         lcd->spi = spi;
430         lcd->mode = TPO_R02_MODE_800x480;
431         memcpy(lcd->gamma, td043mtea1_def_gamma, sizeof(lcd->gamma));
432
433         lcd->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
434         if (IS_ERR(lcd->vcc_reg)) {
435                 dev_err(&spi->dev, "failed to get VCC regulator\n");
436                 return PTR_ERR(lcd->vcc_reg);
437         }
438
439         lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_HIGH);
440         if (IS_ERR(lcd->reset_gpio)) {
441                 dev_err(&spi->dev, "failed to get reset GPIO\n");
442                 return PTR_ERR(lcd->reset_gpio);
443         }
444
445         spi->bits_per_word = 16;
446         spi->mode = SPI_MODE_0;
447
448         ret = spi_setup(spi);
449         if (ret < 0) {
450                 dev_err(&spi->dev, "failed to setup SPI: %d\n", ret);
451                 return ret;
452         }
453
454         ret = sysfs_create_group(&spi->dev.kobj, &td043mtea1_attr_group);
455         if (ret < 0) {
456                 dev_err(&spi->dev, "failed to create sysfs files\n");
457                 return ret;
458         }
459
460         drm_panel_init(&lcd->panel, &lcd->spi->dev, &td043mtea1_funcs,
461                        DRM_MODE_CONNECTOR_DPI);
462
463         drm_panel_add(&lcd->panel);
464
465         return 0;
466 }
467
468 static int td043mtea1_remove(struct spi_device *spi)
469 {
470         struct td043mtea1_panel *lcd = spi_get_drvdata(spi);
471
472         drm_panel_remove(&lcd->panel);
473         drm_panel_disable(&lcd->panel);
474         drm_panel_unprepare(&lcd->panel);
475
476         sysfs_remove_group(&spi->dev.kobj, &td043mtea1_attr_group);
477
478         return 0;
479 }
480
481 static const struct of_device_id td043mtea1_of_match[] = {
482         { .compatible = "tpo,td043mtea1", },
483         { /* sentinel */ },
484 };
485
486 MODULE_DEVICE_TABLE(of, td043mtea1_of_match);
487
488 static const struct spi_device_id td043mtea1_ids[] = {
489         { "td043mtea1", 0 },
490         { /* sentinel */ }
491 };
492
493 MODULE_DEVICE_TABLE(spi, td043mtea1_ids);
494
495 static struct spi_driver td043mtea1_driver = {
496         .probe          = td043mtea1_probe,
497         .remove         = td043mtea1_remove,
498         .id_table       = td043mtea1_ids,
499         .driver         = {
500                 .name   = "panel-tpo-td043mtea1",
501                 .pm     = &td043mtea1_pm_ops,
502                 .of_match_table = td043mtea1_of_match,
503         },
504 };
505
506 module_spi_driver(td043mtea1_driver);
507
508 MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
509 MODULE_DESCRIPTION("TPO TD043MTEA1 Panel Driver");
510 MODULE_LICENSE("GPL");