1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_BOE_HIMAX8279D
41 tristate "Boe Himax8279d panel"
43 depends on DRM_MIPI_DSI
44 depends on BACKLIGHT_CLASS_DEVICE
46 Say Y here if you want to enable support for Boe Himax8279d
47 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
48 24 bit RGB per pixel. It provides a MIPI DSI interface to
49 the host and has a built-in LED backlight.
51 config DRM_PANEL_BOE_TV101WUM_NL6
52 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
54 depends on DRM_MIPI_DSI
55 depends on BACKLIGHT_CLASS_DEVICE
57 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
58 45NA WUXGA PANEL DSI Video Mode panel
60 config DRM_PANEL_DSI_CM
61 tristate "Generic DSI command mode panels"
63 depends on DRM_MIPI_DSI
64 depends on BACKLIGHT_CLASS_DEVICE
66 DRM panel driver for DSI command mode panels with support for
67 embedded and external backlights.
70 tristate "Generic LVDS panel driver"
72 depends on BACKLIGHT_CLASS_DEVICE
73 select VIDEOMODE_HELPERS
75 This driver supports LVDS panels that don't require device-specific
76 handling of power supplies or control signals. It implements automatic
77 backlight handling if the panel is attached to a backlight controller.
79 config DRM_PANEL_SIMPLE
80 tristate "support for simple panels (other than eDP ones)"
82 depends on BACKLIGHT_CLASS_DEVICE
84 select VIDEOMODE_HELPERS
86 DRM panel driver for dumb non-eDP panels that need at most a regulator
87 and a GPIO to be powered up. Optionally a backlight can be attached so
88 that it can be automatically turned off when the panel goes into a
92 tristate "support for simple Embedded DisplayPort panels"
94 depends on BACKLIGHT_CLASS_DEVICE
96 select VIDEOMODE_HELPERS
99 DRM panel driver for dumb eDP panels that need at most a regulator and
100 a GPIO to be powered up. Optionally a backlight can be attached so
101 that it can be automatically turned off when the panel goes into a
104 config DRM_PANEL_ELIDA_KD35T133
105 tristate "Elida KD35T133 panel driver"
107 depends on DRM_MIPI_DSI
108 depends on BACKLIGHT_CLASS_DEVICE
110 Say Y here if you want to enable support for the Elida
111 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
114 config DRM_PANEL_FEIXIN_K101_IM2BA02
115 tristate "Feixin K101 IM2BA02 panel"
117 depends on DRM_MIPI_DSI
118 depends on BACKLIGHT_CLASS_DEVICE
120 Say Y here if you want to enable support for the Feixin K101 IM2BA02
121 4-lane 800x1280 MIPI DSI panel.
123 config DRM_PANEL_FEIYANG_FY07024DI26A30D
124 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
126 depends on DRM_MIPI_DSI
127 depends on BACKLIGHT_CLASS_DEVICE
129 Say Y if you want to enable support for panels based on the
130 Feiyang FY07024DI26A30-D MIPI-DSI interface.
132 config DRM_PANEL_ILITEK_IL9322
133 tristate "Ilitek ILI9322 320x240 QVGA panels"
137 Say Y here if you want to enable support for Ilitek IL9322
138 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
140 config DRM_PANEL_ILITEK_ILI9341
141 tristate "Ilitek ILI9341 240x320 QVGA panels"
143 depends on DRM_KMS_HELPER
144 depends on DRM_KMS_CMA_HELPER
145 depends on BACKLIGHT_CLASS_DEVICE
148 Say Y here if you want to enable support for Ilitek IL9341
149 QVGA (240x320) RGB panels. support serial & parallel rgb
152 config DRM_PANEL_ILITEK_ILI9881C
153 tristate "Ilitek ILI9881C-based panels"
155 depends on DRM_MIPI_DSI
156 depends on BACKLIGHT_CLASS_DEVICE
158 Say Y if you want to enable support for panels based on the
159 Ilitek ILI9881c controller.
161 config DRM_PANEL_INNOLUX_EJ030NA
162 tristate "Innolux EJ030NA 320x480 LCD panel"
166 Say Y here to enable support for the Innolux/Chimei EJ030NA
167 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
168 and LDK handheld gaming consoles.
170 config DRM_PANEL_INNOLUX_P079ZCA
171 tristate "Innolux P079ZCA panel"
173 depends on DRM_MIPI_DSI
174 depends on BACKLIGHT_CLASS_DEVICE
176 Say Y here if you want to enable support for Innolux P079ZCA
177 TFT-LCD modules. The panel has a 1024x768 resolution and uses
178 24 bit RGB per pixel. It provides a MIPI DSI interface to
179 the host and has a built-in LED backlight.
181 config DRM_PANEL_JDI_LT070ME05000
182 tristate "JDI LT070ME05000 WUXGA DSI panel"
184 depends on DRM_MIPI_DSI
185 depends on BACKLIGHT_CLASS_DEVICE
187 Say Y here if you want to enable support for JDI DSI video mode
188 panel as found in Google Nexus 7 (2013) devices.
189 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
192 config DRM_PANEL_KHADAS_TS050
193 tristate "Khadas TS050 panel"
195 depends on DRM_MIPI_DSI
196 depends on BACKLIGHT_CLASS_DEVICE
198 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
199 panel module. The panel has a 1080x1920 resolution and uses
200 24 bit RGB per pixel. It provides a MIPI DSI interface to
201 the host, a built-in LED backlight and touch controller.
203 config DRM_PANEL_KINGDISPLAY_KD097D04
204 tristate "Kingdisplay kd097d04 panel"
206 depends on DRM_MIPI_DSI
207 depends on BACKLIGHT_CLASS_DEVICE
209 Say Y here if you want to enable support for Kingdisplay kd097d04
210 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
211 24 bit RGB per pixel. It provides a MIPI DSI interface to
212 the host and has a built-in LED backlight.
214 config DRM_PANEL_LEADTEK_LTK050H3146W
215 tristate "Leadtek LTK050H3146W panel"
217 depends on DRM_MIPI_DSI
218 depends on BACKLIGHT_CLASS_DEVICE
220 Say Y here if you want to enable support for Leadtek LTK050H3146W
221 TFT-LCD modules. The panel has a 720x1280 resolution and uses
222 24 bit RGB per pixel. It provides a MIPI DSI interface to
223 the host and has a built-in LED backlight.
225 config DRM_PANEL_LEADTEK_LTK500HD1829
226 tristate "Leadtek LTK500HD1829 panel"
228 depends on DRM_MIPI_DSI
229 depends on BACKLIGHT_CLASS_DEVICE
231 Say Y here if you want to enable support for Kingdisplay kd097d04
232 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
233 24 bit RGB per pixel. It provides a MIPI DSI interface to
234 the host and has a built-in LED backlight.
236 config DRM_PANEL_SAMSUNG_LD9040
237 tristate "Samsung LD9040 RGB/SPI panel"
239 select VIDEOMODE_HELPERS
241 config DRM_PANEL_LG_LB035Q02
242 tristate "LG LB035Q024573 RGB panel"
243 depends on GPIOLIB && OF && SPI
245 Say Y here if you want to enable support for the LB035Q02 RGB panel
246 (found on the Gumstix Overo Palo35 board). To compile this driver as
247 a module, choose M here.
249 config DRM_PANEL_LG_LG4573
250 tristate "LG4573 RGB/SPI panel"
252 select VIDEOMODE_HELPERS
254 Say Y here if you want to enable support for LG4573 RGB panel.
255 To compile this driver as a module, choose M here.
257 config DRM_PANEL_NEC_NL8048HL11
258 tristate "NEC NL8048HL11 RGB panel"
259 depends on GPIOLIB && OF && SPI
261 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
262 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
263 as a module, choose M here.
265 config DRM_PANEL_NOVATEK_NT35510
266 tristate "Novatek NT35510 RGB panel driver"
268 depends on DRM_MIPI_DSI
269 depends on BACKLIGHT_CLASS_DEVICE
271 Say Y here if you want to enable support for the panels built
272 around the Novatek NT35510 display controller, such as some
275 config DRM_PANEL_NOVATEK_NT36672A
276 tristate "Novatek NT36672A DSI panel"
278 depends on DRM_MIPI_DSI
279 depends on BACKLIGHT_CLASS_DEVICE
281 Say Y here if you want to enable support for the panels built
282 around the Novatek NT36672A display controller, such as some
283 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
285 config DRM_PANEL_NOVATEK_NT39016
286 tristate "Novatek NT39016 RGB/SPI panel"
288 depends on BACKLIGHT_CLASS_DEVICE
291 Say Y here if you want to enable support for the panels built
292 around the Novatek NT39016 display controller.
294 config DRM_PANEL_MANTIX_MLAF057WE51
295 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
297 depends on DRM_MIPI_DSI
298 depends on BACKLIGHT_CLASS_DEVICE
300 Say Y here if you want to enable support for the Mantix
301 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
302 has a resolution of 720x1440 pixels, a built in backlight and touch
305 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
306 tristate "Olimex LCD-OLinuXino panel"
309 depends on BACKLIGHT_CLASS_DEVICE
312 The panel is used with different sizes LCDs, from 480x272 to
313 1280x800, and 24 bit per pixel.
315 Say Y here if you want to enable support for Olimex Ltd.
318 config DRM_PANEL_ORISETECH_OTM8009A
319 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
321 depends on DRM_MIPI_DSI
322 depends on BACKLIGHT_CLASS_DEVICE
324 Say Y here if you want to enable support for Orise Technology
325 otm8009a 480x800 dsi 2dl panel.
327 config DRM_PANEL_OSD_OSD101T2587_53TS
328 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
330 depends on DRM_MIPI_DSI
331 depends on BACKLIGHT_CLASS_DEVICE
333 Say Y here if you want to enable support for One Stop Displays
334 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
336 config DRM_PANEL_PANASONIC_VVX10F034N00
337 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
339 depends on DRM_MIPI_DSI
340 depends on BACKLIGHT_CLASS_DEVICE
342 Say Y here if you want to enable support for Panasonic VVX10F034N00
343 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
346 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
347 tristate "Raspberry Pi 7-inch touchscreen panel"
348 depends on DRM_MIPI_DSI
350 Say Y here if you want to enable support for the Raspberry
351 Pi 7" Touchscreen. To compile this driver as a module,
354 config DRM_PANEL_RAYDIUM_RM67191
355 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
357 depends on DRM_MIPI_DSI
358 depends on BACKLIGHT_CLASS_DEVICE
360 Say Y here if you want to enable support for Raydium RM67191 FHD
361 (1080x1920) DSI panel.
363 config DRM_PANEL_RAYDIUM_RM68200
364 tristate "Raydium RM68200 720x1280 DSI video mode panel"
366 depends on DRM_MIPI_DSI
367 depends on BACKLIGHT_CLASS_DEVICE
369 Say Y here if you want to enable support for Raydium RM68200
370 720x1280 DSI video mode panel.
372 config DRM_PANEL_RONBO_RB070D30
373 tristate "Ronbo Electronics RB070D30 panel"
375 depends on DRM_MIPI_DSI
376 depends on BACKLIGHT_CLASS_DEVICE
378 Say Y here if you want to enable support for Ronbo Electronics
379 RB070D30 1024x600 DSI panel.
381 config DRM_PANEL_SAMSUNG_ATNA33XC20
382 tristate "Samsung ATNA33XC20 eDP panel"
384 depends on BACKLIGHT_CLASS_DEVICE
386 select DRM_DP_AUX_BUS
388 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
389 be handled by the DRM_PANEL_SIMPLE driver because its power
390 sequencing is non-standard.
392 config DRM_PANEL_SAMSUNG_DB7430
393 tristate "Samsung DB7430-based DPI panels"
394 depends on OF && SPI && GPIOLIB
395 depends on BACKLIGHT_CLASS_DEVICE
398 Say Y here if you want to enable support for the Samsung
399 DB7430 DPI display controller used in such devices as the
400 LMS397KF04 480x800 DPI panel.
402 config DRM_PANEL_SAMSUNG_S6D16D0
403 tristate "Samsung S6D16D0 DSI video mode panel"
405 depends on DRM_MIPI_DSI
406 select VIDEOMODE_HELPERS
408 config DRM_PANEL_SAMSUNG_S6D27A1
409 tristate "Samsung S6D27A1 DPI panel driver"
410 depends on OF && SPI && GPIOLIB
413 Say Y here if you want to enable support for the Samsung
414 S6D27A1 DPI 480x800 panel.
416 This panel can be found in Samsung Galaxy Ace 2
417 GT-I8160 mobile phone.
419 config DRM_PANEL_SAMSUNG_S6E3HA2
420 tristate "Samsung S6E3HA2 DSI video mode panel"
422 depends on DRM_MIPI_DSI
423 depends on BACKLIGHT_CLASS_DEVICE
424 select VIDEOMODE_HELPERS
426 config DRM_PANEL_SAMSUNG_S6E63J0X03
427 tristate "Samsung S6E63J0X03 DSI command mode panel"
429 depends on DRM_MIPI_DSI
430 depends on BACKLIGHT_CLASS_DEVICE
431 select VIDEOMODE_HELPERS
433 config DRM_PANEL_SAMSUNG_S6E63M0
434 tristate "Samsung S6E63M0 RGB panel"
436 depends on BACKLIGHT_CLASS_DEVICE
438 Say Y here if you want to enable support for Samsung S6E63M0
439 AMOLED LCD panel. This panel can be accessed using SPI or
442 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
443 tristate "Samsung S6E63M0 RGB SPI interface"
445 depends on DRM_PANEL_SAMSUNG_S6E63M0
446 default DRM_PANEL_SAMSUNG_S6E63M0
449 Say Y here if you want to be able to access the Samsung
450 S6E63M0 panel using SPI.
452 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
453 tristate "Samsung S6E63M0 RGB DSI interface"
454 depends on DRM_MIPI_DSI
455 depends on DRM_PANEL_SAMSUNG_S6E63M0
457 Say Y here if you want to be able to access the Samsung
458 S6E63M0 panel using DSI.
460 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
461 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
464 select VIDEOMODE_HELPERS
466 config DRM_PANEL_SAMSUNG_S6E8AA0
467 tristate "Samsung S6E8AA0 DSI video mode panel"
470 select VIDEOMODE_HELPERS
472 config DRM_PANEL_SAMSUNG_SOFEF00
473 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
475 depends on DRM_MIPI_DSI
476 depends on BACKLIGHT_CLASS_DEVICE
477 select VIDEOMODE_HELPERS
479 Say Y or M here if you want to enable support for the Samsung AMOLED
480 command mode panels found in the OnePlus 6/6T smartphones.
482 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
484 config DRM_PANEL_SEIKO_43WVF1G
485 tristate "Seiko 43WVF1G panel"
487 depends on BACKLIGHT_CLASS_DEVICE
488 select VIDEOMODE_HELPERS
490 Say Y here if you want to enable support for the Seiko
491 43WVF1G controller for 800x480 LCD panels
493 config DRM_PANEL_SHARP_LQ101R1SX01
494 tristate "Sharp LQ101R1SX01 panel"
496 depends on DRM_MIPI_DSI
497 depends on BACKLIGHT_CLASS_DEVICE
499 Say Y here if you want to enable support for Sharp LQ101R1SX01
500 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
501 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
502 the host and has a built-in LED backlight.
504 To compile this driver as a module, choose M here: the module
505 will be called panel-sharp-lq101r1sx01.
507 config DRM_PANEL_SHARP_LS037V7DW01
508 tristate "Sharp LS037V7DW01 VGA LCD panel"
509 depends on GPIOLIB && OF && REGULATOR
511 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
512 (480x640) LCD panel (found on the TI SDP3430 board).
514 config DRM_PANEL_SHARP_LS043T1LE01
515 tristate "Sharp LS043T1LE01 qHD video mode panel"
517 depends on DRM_MIPI_DSI
518 depends on BACKLIGHT_CLASS_DEVICE
520 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
521 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
523 config DRM_PANEL_SHARP_LS060T1SX01
524 tristate "Sharp LS060T1SX01 FullHD video mode panel"
526 depends on DRM_MIPI_DSI
527 depends on BACKLIGHT_CLASS_DEVICE
529 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
530 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
533 config DRM_PANEL_SITRONIX_ST7701
534 tristate "Sitronix ST7701 panel driver"
536 depends on DRM_MIPI_DSI
537 depends on BACKLIGHT_CLASS_DEVICE
539 Say Y here if you want to enable support for the Sitronix
540 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
543 config DRM_PANEL_SITRONIX_ST7703
544 tristate "Sitronix ST7703 based MIPI touchscreen panels"
546 depends on DRM_MIPI_DSI
547 depends on BACKLIGHT_CLASS_DEVICE
549 Say Y here if you want to enable support for Sitronix ST7703 based
550 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
551 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
552 in backlight and touch controller.
553 Touch input support is provided by the goodix driver and needs to be
556 config DRM_PANEL_SITRONIX_ST7789V
557 tristate "Sitronix ST7789V panel"
559 depends on BACKLIGHT_CLASS_DEVICE
561 Say Y here if you want to enable support for the Sitronix
562 ST7789V controller for 240x320 LCD panels
564 config DRM_PANEL_SONY_ACX424AKP
565 tristate "Sony ACX424AKP DSI command mode panel"
567 depends on DRM_MIPI_DSI
568 depends on BACKLIGHT_CLASS_DEVICE
569 select VIDEOMODE_HELPERS
571 Say Y here if you want to enable the Sony ACX424 display
572 panel. This panel supports DSI in both command and video
575 config DRM_PANEL_SONY_ACX565AKM
576 tristate "Sony ACX565AKM panel"
577 depends on GPIOLIB && OF && SPI
578 depends on BACKLIGHT_CLASS_DEVICE
580 Say Y here if you want to enable support for the Sony ACX565AKM
581 800x600 3.5" panel (found on the Nokia N900).
583 config DRM_PANEL_TDO_TL070WSH30
584 tristate "TDO TL070WSH30 DSI panel"
586 depends on DRM_MIPI_DSI
587 depends on BACKLIGHT_CLASS_DEVICE
589 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
590 panel module. The panel has a 1024×600 resolution and uses
591 24 bit RGB per pixel. It provides a MIPI DSI interface to
592 the host, a built-in LED backlight and touch controller.
594 config DRM_PANEL_TPO_TD028TTEC1
595 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
597 depends on BACKLIGHT_CLASS_DEVICE
599 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
600 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
602 config DRM_PANEL_TPO_TD043MTEA1
603 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
604 depends on GPIOLIB && OF && REGULATOR && SPI
606 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
607 4.3" panel (found on the OMAP3 Pandora board).
609 config DRM_PANEL_TPO_TPG110
610 tristate "TPO TPG 800x400 panel"
611 depends on OF && SPI && GPIOLIB
612 depends on BACKLIGHT_CLASS_DEVICE
614 Say Y here if you want to enable support for TPO TPG110
615 400CH LTPS TFT LCD Single Chip Digital Driver for up to
618 config DRM_PANEL_TRULY_NT35597_WQXGA
619 tristate "Truly WQXGA"
621 depends on DRM_MIPI_DSI
623 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
626 config DRM_PANEL_VISIONOX_RM69299
627 tristate "Visionox RM69299"
629 depends on DRM_MIPI_DSI
631 Say Y here if you want to enable support for Visionox
632 RM69299 DSI Video Mode panel.
634 config DRM_PANEL_WIDECHIPS_WS2401
635 tristate "Widechips WS2401 DPI panel driver"
636 depends on SPI && GPIOLIB
637 depends on BACKLIGHT_CLASS_DEVICE
640 Say Y here if you want to enable support for the Widechips WS2401 DPI
641 480x800 display controller used in panels such as Samsung LMS380KF01.
642 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
644 config DRM_PANEL_XINPENG_XPP055C272
645 tristate "Xinpeng XPP055C272 panel driver"
647 depends on DRM_MIPI_DSI
648 depends on BACKLIGHT_CLASS_DEVICE
650 Say Y here if you want to enable support for the Xinpeng
651 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI