drivers/gpu/drm/i915/display/intel_cdclk.c

   1 /*
   2  * Copyright © 2006-2017 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  */
  23
  24 #include <linux/time.h>
  25
  26 #include "intel_atomic.h"
  27 #include "intel_bw.h"
  28 #include "intel_cdclk.h"
  29 #include "intel_display_types.h"
  30 #include "intel_sideband.h"
  31
  32 /**
  33  * DOC: CDCLK / RAWCLK
  34  *
  35  * The display engine uses several different clocks to do its work. There
  36  * are two main clocks involved that aren't directly related to the actual
  37  * pixel clock or any symbol/bit clock of the actual output port. These
  38  * are the core display clock (CDCLK) and RAWCLK.
  39  *
  40  * CDCLK clocks most of the display pipe logic, and thus its frequency
  41  * must be high enough to support the rate at which pixels are flowing
  42  * through the pipes. Downscaling must also be accounted as that increases
  43  * the effective pixel rate.
  44  *
  45  * On several platforms the CDCLK frequency can be changed dynamically
  46  * to minimize power consumption for a given display configuration.
  47  * Typically changes to the CDCLK frequency require all the display pipes
  48  * to be shut down while the frequency is being changed.
  49  *
  50  * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit.
  51  * DMC will not change the active CDCLK frequency however, so that part
  52  * will still be performed by the driver directly.
  53  *
  54  * RAWCLK is a fixed frequency clock, often used by various auxiliary
  55  * blocks such as AUX CH or backlight PWM. Hence the only thing we
  56  * really need to know about RAWCLK is its frequency so that various
  57  * dividers can be programmed correctly.
  58  */
  59
  60 static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv,
  61                                    struct intel_cdclk_config *cdclk_config)
  62 {
  63         cdclk_config->cdclk = 133333;
  64 }
  65
  66 static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv,
  67                                    struct intel_cdclk_config *cdclk_config)
  68 {
  69         cdclk_config->cdclk = 200000;
  70 }
  71
  72 static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv,
  73                                    struct intel_cdclk_config *cdclk_config)
  74 {
  75         cdclk_config->cdclk = 266667;
  76 }
  77
  78 static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv,
  79                                    struct intel_cdclk_config *cdclk_config)
  80 {
  81         cdclk_config->cdclk = 333333;
  82 }
  83
  84 static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv,
  85                                    struct intel_cdclk_config *cdclk_config)
  86 {
  87         cdclk_config->cdclk = 400000;
  88 }
  89
  90 static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv,
  91                                    struct intel_cdclk_config *cdclk_config)
  92 {
  93         cdclk_config->cdclk = 450000;
  94 }
  95
  96 static void i85x_get_cdclk(struct drm_i915_private *dev_priv,
  97                            struct intel_cdclk_config *cdclk_config)
  98 {
  99         struct pci_dev *pdev = dev_priv->drm.pdev;
 100         u16 hpllcc = 0;
 101
 102         /*
 103          * 852GM/852GMV only supports 133 MHz and the HPLLCC
 104          * encoding is different :(
 105          * FIXME is this the right way to detect 852GM/852GMV?
 106          */
 107         if (pdev->revision == 0x1) {
 108                 cdclk_config->cdclk = 133333;
 109                 return;
 110         }
 111
 112         pci_bus_read_config_word(pdev->bus,
 113                                  PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
 114
 115         /* Assume that the hardware is in the high speed state.  This
 116          * should be the default.
 117          */
 118         switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
 119         case GC_CLOCK_133_200:
 120         case GC_CLOCK_133_200_2:
 121         case GC_CLOCK_100_200:
 122                 cdclk_config->cdclk = 200000;
 123                 break;
 124         case GC_CLOCK_166_250:
 125                 cdclk_config->cdclk = 250000;
 126                 break;
 127         case GC_CLOCK_100_133:
 128                 cdclk_config->cdclk = 133333;
 129                 break;
 130         case GC_CLOCK_133_266:
 131         case GC_CLOCK_133_266_2:
 132         case GC_CLOCK_166_266:
 133                 cdclk_config->cdclk = 266667;
 134                 break;
 135         }
 136 }
 137
 138 static void i915gm_get_cdclk(struct drm_i915_private *dev_priv,
 139                              struct intel_cdclk_config *cdclk_config)
 140 {
 141         struct pci_dev *pdev = dev_priv->drm.pdev;
 142         u16 gcfgc = 0;
 143
 144         pci_read_config_word(pdev, GCFGC, &gcfgc);
 145
 146         if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
 147                 cdclk_config->cdclk = 133333;
 148                 return;
 149         }
 150
 151         switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
 152         case GC_DISPLAY_CLOCK_333_320_MHZ:
 153                 cdclk_config->cdclk = 333333;
 154                 break;
 155         default:
 156         case GC_DISPLAY_CLOCK_190_200_MHZ:
 157                 cdclk_config->cdclk = 190000;
 158                 break;
 159         }
 160 }
 161
 162 static void i945gm_get_cdclk(struct drm_i915_private *dev_priv,
 163                              struct intel_cdclk_config *cdclk_config)
 164 {
 165         struct pci_dev *pdev = dev_priv->drm.pdev;
 166         u16 gcfgc = 0;
 167
 168         pci_read_config_word(pdev, GCFGC, &gcfgc);
 169
 170         if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
 171                 cdclk_config->cdclk = 133333;
 172                 return;
 173         }
 174
 175         switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
 176         case GC_DISPLAY_CLOCK_333_320_MHZ:
 177                 cdclk_config->cdclk = 320000;
 178                 break;
 179         default:
 180         case GC_DISPLAY_CLOCK_190_200_MHZ:
 181                 cdclk_config->cdclk = 200000;
 182                 break;
 183         }
 184 }
 185
 186 static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv)
 187 {
 188         static const unsigned int blb_vco[8] = {
 189                 [0] = 3200000,
 190                 [1] = 4000000,
 191                 [2] = 5333333,
 192                 [3] = 4800000,
 193                 [4] = 6400000,
 194         };
 195         static const unsigned int pnv_vco[8] = {
 196                 [0] = 3200000,
 197                 [1] = 4000000,
 198                 [2] = 5333333,
 199                 [3] = 4800000,
 200                 [4] = 2666667,
 201         };
 202         static const unsigned int cl_vco[8] = {
 203                 [0] = 3200000,
 204                 [1] = 4000000,
 205                 [2] = 5333333,
 206                 [3] = 6400000,
 207                 [4] = 3333333,
 208                 [5] = 3566667,
 209                 [6] = 4266667,
 210         };
 211         static const unsigned int elk_vco[8] = {
 212                 [0] = 3200000,
 213                 [1] = 4000000,
 214                 [2] = 5333333,
 215                 [3] = 4800000,
 216         };
 217         static const unsigned int ctg_vco[8] = {
 218                 [0] = 3200000,
 219                 [1] = 4000000,
 220                 [2] = 5333333,
 221                 [3] = 6400000,
 222                 [4] = 2666667,
 223                 [5] = 4266667,
 224         };
 225         const unsigned int *vco_table;
 226         unsigned int vco;
 227         u8 tmp = 0;
 228
 229         /* FIXME other chipsets? */
 230         if (IS_GM45(dev_priv))
 231                 vco_table = ctg_vco;
 232         else if (IS_G45(dev_priv))
 233                 vco_table = elk_vco;
 234         else if (IS_I965GM(dev_priv))
 235                 vco_table = cl_vco;
 236         else if (IS_PINEVIEW(dev_priv))
 237                 vco_table = pnv_vco;
 238         else if (IS_G33(dev_priv))
 239                 vco_table = blb_vco;
 240         else
 241                 return 0;
 242
 243         tmp = intel_de_read(dev_priv,
 244                             IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO);
 245
 246         vco = vco_table[tmp & 0x7];
 247         if (vco == 0)
 248                 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n",
 249                         tmp);
 250         else
 251                 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco);
 252
 253         return vco;
 254 }
 255
 256 static void g33_get_cdclk(struct drm_i915_private *dev_priv,
 257                           struct intel_cdclk_config *cdclk_config)
 258 {
 259         struct pci_dev *pdev = dev_priv->drm.pdev;
 260         static const u8 div_3200[] = { 12, 10,  8,  7, 5, 16 };
 261         static const u8 div_4000[] = { 14, 12, 10,  8, 6, 20 };
 262         static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 };
 263         static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 };
 264         const u8 *div_table;
 265         unsigned int cdclk_sel;
 266         u16 tmp = 0;
 267
 268         cdclk_config->vco = intel_hpll_vco(dev_priv);
 269
 270         pci_read_config_word(pdev, GCFGC, &tmp);
 271
 272         cdclk_sel = (tmp >> 4) & 0x7;
 273
 274         if (cdclk_sel >= ARRAY_SIZE(div_3200))
 275                 goto fail;
 276
 277         switch (cdclk_config->vco) {
 278         case 3200000:
 279                 div_table = div_3200;
 280                 break;
 281         case 4000000:
 282                 div_table = div_4000;
 283                 break;
 284         case 4800000:
 285                 div_table = div_4800;
 286                 break;
 287         case 5333333:
 288                 div_table = div_5333;
 289                 break;
 290         default:
 291                 goto fail;
 292         }
 293
 294         cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
 295                                                 div_table[cdclk_sel]);
 296         return;
 297
 298 fail:
 299         drm_err(&dev_priv->drm,
 300                 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n",
 301                 cdclk_config->vco, tmp);
 302         cdclk_config->cdclk = 190476;
 303 }
 304
 305 static void pnv_get_cdclk(struct drm_i915_private *dev_priv,
 306                           struct intel_cdclk_config *cdclk_config)
 307 {
 308         struct pci_dev *pdev = dev_priv->drm.pdev;
 309         u16 gcfgc = 0;
 310
 311         pci_read_config_word(pdev, GCFGC, &gcfgc);
 312
 313         switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
 314         case GC_DISPLAY_CLOCK_267_MHZ_PNV:
 315                 cdclk_config->cdclk = 266667;
 316                 break;
 317         case GC_DISPLAY_CLOCK_333_MHZ_PNV:
 318                 cdclk_config->cdclk = 333333;
 319                 break;
 320         case GC_DISPLAY_CLOCK_444_MHZ_PNV:
 321                 cdclk_config->cdclk = 444444;
 322                 break;
 323         case GC_DISPLAY_CLOCK_200_MHZ_PNV:
 324                 cdclk_config->cdclk = 200000;
 325                 break;
 326         default:
 327                 drm_err(&dev_priv->drm,
 328                         "Unknown pnv display core clock 0x%04x\n", gcfgc);
 329                 fallthrough;
 330         case GC_DISPLAY_CLOCK_133_MHZ_PNV:
 331                 cdclk_config->cdclk = 133333;
 332                 break;
 333         case GC_DISPLAY_CLOCK_167_MHZ_PNV:
 334                 cdclk_config->cdclk = 166667;
 335                 break;
 336         }
 337 }
 338
 339 static void i965gm_get_cdclk(struct drm_i915_private *dev_priv,
 340                              struct intel_cdclk_config *cdclk_config)
 341 {
 342         struct pci_dev *pdev = dev_priv->drm.pdev;
 343         static const u8 div_3200[] = { 16, 10,  8 };
 344         static const u8 div_4000[] = { 20, 12, 10 };
 345         static const u8 div_5333[] = { 24, 16, 14 };
 346         const u8 *div_table;
 347         unsigned int cdclk_sel;
 348         u16 tmp = 0;
 349
 350         cdclk_config->vco = intel_hpll_vco(dev_priv);
 351
 352         pci_read_config_word(pdev, GCFGC, &tmp);
 353
 354         cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
 355
 356         if (cdclk_sel >= ARRAY_SIZE(div_3200))
 357                 goto fail;
 358
 359         switch (cdclk_config->vco) {
 360         case 3200000:
 361                 div_table = div_3200;
 362                 break;
 363         case 4000000:
 364                 div_table = div_4000;
 365                 break;
 366         case 5333333:
 367                 div_table = div_5333;
 368                 break;
 369         default:
 370                 goto fail;
 371         }
 372
 373         cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
 374                                                 div_table[cdclk_sel]);
 375         return;
 376
 377 fail:
 378         drm_err(&dev_priv->drm,
 379                 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n",
 380                 cdclk_config->vco, tmp);
 381         cdclk_config->cdclk = 200000;
 382 }
 383
 384 static void gm45_get_cdclk(struct drm_i915_private *dev_priv,
 385                            struct intel_cdclk_config *cdclk_config)
 386 {
 387         struct pci_dev *pdev = dev_priv->drm.pdev;
 388         unsigned int cdclk_sel;
 389         u16 tmp = 0;
 390
 391         cdclk_config->vco = intel_hpll_vco(dev_priv);
 392
 393         pci_read_config_word(pdev, GCFGC, &tmp);
 394
 395         cdclk_sel = (tmp >> 12) & 0x1;
 396
 397         switch (cdclk_config->vco) {
 398         case 2666667:
 399         case 4000000:
 400         case 5333333:
 401                 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222;
 402                 break;
 403         case 3200000:
 404                 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571;
 405                 break;
 406         default:
 407                 drm_err(&dev_priv->drm,
 408                         "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n",
 409                         cdclk_config->vco, tmp);
 410                 cdclk_config->cdclk = 222222;
 411                 break;
 412         }
 413 }
 414
 415 static void hsw_get_cdclk(struct drm_i915_private *dev_priv,
 416                           struct intel_cdclk_config *cdclk_config)
 417 {
 418         u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
 419         u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
 420
 421         if (lcpll & LCPLL_CD_SOURCE_FCLK)
 422                 cdclk_config->cdclk = 800000;
 423         else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
 424                 cdclk_config->cdclk = 450000;
 425         else if (freq == LCPLL_CLK_FREQ_450)
 426                 cdclk_config->cdclk = 450000;
 427         else if (IS_HSW_ULT(dev_priv))
 428                 cdclk_config->cdclk = 337500;
 429         else
 430                 cdclk_config->cdclk = 540000;
 431 }
 432
 433 static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
 434 {
 435         int freq_320 = (dev_priv->hpll_freq <<  1) % 320000 != 0 ?
 436                 333333 : 320000;
 437
 438         /*
 439          * We seem to get an unstable or solid color picture at 200MHz.
 440          * Not sure what's wrong. For now use 200MHz only when all pipes
 441          * are off.
 442          */
 443         if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320)
 444                 return 400000;
 445         else if (min_cdclk > 266667)
 446                 return freq_320;
 447         else if (min_cdclk > 0)
 448                 return 266667;
 449         else
 450                 return 200000;
 451 }
 452
 453 static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
 454 {
 455         if (IS_VALLEYVIEW(dev_priv)) {
 456                 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
 457                         return 2;
 458                 else if (cdclk >= 266667)
 459                         return 1;
 460                 else
 461                         return 0;
 462         } else {
 463                 /*
 464                  * Specs are full of misinformation, but testing on actual
 465                  * hardware has shown that we just need to write the desired
 466                  * CCK divider into the Punit register.
 467                  */
 468                 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
 469         }
 470 }
 471
 472 static void vlv_get_cdclk(struct drm_i915_private *dev_priv,
 473                           struct intel_cdclk_config *cdclk_config)
 474 {
 475         u32 val;
 476
 477         vlv_iosf_sb_get(dev_priv,
 478                         BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
 479
 480         cdclk_config->vco = vlv_get_hpll_vco(dev_priv);
 481         cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk",
 482                                                 CCK_DISPLAY_CLOCK_CONTROL,
 483                                                 cdclk_config->vco);
 484
 485         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
 486
 487         vlv_iosf_sb_put(dev_priv,
 488                         BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
 489
 490         if (IS_VALLEYVIEW(dev_priv))
 491                 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >>
 492                         DSPFREQGUAR_SHIFT;
 493         else
 494                 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >>
 495                         DSPFREQGUAR_SHIFT_CHV;
 496 }
 497
 498 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
 499 {
 500         unsigned int credits, default_credits;
 501
 502         if (IS_CHERRYVIEW(dev_priv))
 503                 default_credits = PFI_CREDIT(12);
 504         else
 505                 default_credits = PFI_CREDIT(8);
 506
 507         if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) {
 508                 /* CHV suggested value is 31 or 63 */
 509                 if (IS_CHERRYVIEW(dev_priv))
 510                         credits = PFI_CREDIT_63;
 511                 else
 512                         credits = PFI_CREDIT(15);
 513         } else {
 514                 credits = default_credits;
 515         }
 516
 517         /*
 518          * WA - write default credits before re-programming
 519          * FIXME: should we also set the resend bit here?
 520          */
 521         intel_de_write(dev_priv, GCI_CONTROL,
 522                        VGA_FAST_MODE_DISABLE | default_credits);
 523
 524         intel_de_write(dev_priv, GCI_CONTROL,
 525                        VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND);
 526
 527         /*
 528          * FIXME is this guaranteed to clear
 529          * immediately or should we poll for it?
 530          */
 531         drm_WARN_ON(&dev_priv->drm,
 532                     intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
 533 }
 534
 535 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
 536                           const struct intel_cdclk_config *cdclk_config,
 537                           enum pipe pipe)
 538 {
 539         int cdclk = cdclk_config->cdclk;
 540         u32 val, cmd = cdclk_config->voltage_level;
 541         intel_wakeref_t wakeref;
 542
 543         switch (cdclk) {
 544         case 400000:
 545         case 333333:
 546         case 320000:
 547         case 266667:
 548         case 200000:
 549                 break;
 550         default:
 551                 MISSING_CASE(cdclk);
 552                 return;
 553         }
 554
 555         /* There are cases where we can end up here with power domains
 556          * off and a CDCLK frequency other than the minimum, like when
 557          * issuing a modeset without actually changing any display after
 558          * a system suspend.  So grab the display core domain, which covers
 559          * the HW blocks needed for the following programming.
 560          */
 561         wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
 562
 563         vlv_iosf_sb_get(dev_priv,
 564                         BIT(VLV_IOSF_SB_CCK) |
 565                         BIT(VLV_IOSF_SB_BUNIT) |
 566                         BIT(VLV_IOSF_SB_PUNIT));
 567
 568         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
 569         val &= ~DSPFREQGUAR_MASK;
 570         val |= (cmd << DSPFREQGUAR_SHIFT);
 571         vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
 572         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
 573                       DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
 574                      50)) {
 575                 drm_err(&dev_priv->drm,
 576                         "timed out waiting for CDclk change\n");
 577         }
 578
 579         if (cdclk == 400000) {
 580                 u32 divider;
 581
 582                 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1,
 583                                             cdclk) - 1;
 584
 585                 /* adjust cdclk divider */
 586                 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
 587                 val &= ~CCK_FREQUENCY_VALUES;
 588                 val |= divider;
 589                 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
 590
 591                 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
 592                               CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
 593                              50))
 594                         drm_err(&dev_priv->drm,
 595                                 "timed out waiting for CDclk change\n");
 596         }
 597
 598         /* adjust self-refresh exit latency value */
 599         val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
 600         val &= ~0x7f;
 601
 602         /*
 603          * For high bandwidth configs, we set a higher latency in the bunit
 604          * so that the core display fetch happens in time to avoid underruns.
 605          */
 606         if (cdclk == 400000)
 607                 val |= 4500 / 250; /* 4.5 usec */
 608         else
 609                 val |= 3000 / 250; /* 3.0 usec */
 610         vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
 611
 612         vlv_iosf_sb_put(dev_priv,
 613                         BIT(VLV_IOSF_SB_CCK) |
 614                         BIT(VLV_IOSF_SB_BUNIT) |
 615                         BIT(VLV_IOSF_SB_PUNIT));
 616
 617         intel_update_cdclk(dev_priv);
 618
 619         vlv_program_pfi_credits(dev_priv);
 620
 621         intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
 622 }
 623
 624 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
 625                           const struct intel_cdclk_config *cdclk_config,
 626                           enum pipe pipe)
 627 {
 628         int cdclk = cdclk_config->cdclk;
 629         u32 val, cmd = cdclk_config->voltage_level;
 630         intel_wakeref_t wakeref;
 631
 632         switch (cdclk) {
 633         case 333333:
 634         case 320000:
 635         case 266667:
 636         case 200000:
 637                 break;
 638         default:
 639                 MISSING_CASE(cdclk);
 640                 return;
 641         }
 642
 643         /* There are cases where we can end up here with power domains
 644          * off and a CDCLK frequency other than the minimum, like when
 645          * issuing a modeset without actually changing any display after
 646          * a system suspend.  So grab the display core domain, which covers
 647          * the HW blocks needed for the following programming.
 648          */
 649         wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
 650
 651         vlv_punit_get(dev_priv);
 652         val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
 653         val &= ~DSPFREQGUAR_MASK_CHV;
 654         val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
 655         vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
 656         if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
 657                       DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
 658                      50)) {
 659                 drm_err(&dev_priv->drm,
 660                         "timed out waiting for CDclk change\n");
 661         }
 662
 663         vlv_punit_put(dev_priv);
 664
 665         intel_update_cdclk(dev_priv);
 666
 667         vlv_program_pfi_credits(dev_priv);
 668
 669         intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
 670 }
 671
 672 static int bdw_calc_cdclk(int min_cdclk)
 673 {
 674         if (min_cdclk > 540000)
 675                 return 675000;
 676         else if (min_cdclk > 450000)
 677                 return 540000;
 678         else if (min_cdclk > 337500)
 679                 return 450000;
 680         else
 681                 return 337500;
 682 }
 683
 684 static u8 bdw_calc_voltage_level(int cdclk)
 685 {
 686         switch (cdclk) {
 687         default:
 688         case 337500:
 689                 return 2;
 690         case 450000:
 691                 return 0;
 692         case 540000:
 693                 return 1;
 694         case 675000:
 695                 return 3;
 696         }
 697 }
 698
 699 static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
 700                           struct intel_cdclk_config *cdclk_config)
 701 {
 702         u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
 703         u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
 704
 705         if (lcpll & LCPLL_CD_SOURCE_FCLK)
 706                 cdclk_config->cdclk = 800000;
 707         else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
 708                 cdclk_config->cdclk = 450000;
 709         else if (freq == LCPLL_CLK_FREQ_450)
 710                 cdclk_config->cdclk = 450000;
 711         else if (freq == LCPLL_CLK_FREQ_54O_BDW)
 712                 cdclk_config->cdclk = 540000;
 713         else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
 714                 cdclk_config->cdclk = 337500;
 715         else
 716                 cdclk_config->cdclk = 675000;
 717
 718         /*
 719          * Can't read this out :( Let's assume it's
 720          * at least what the CDCLK frequency requires.
 721          */
 722         cdclk_config->voltage_level =
 723                 bdw_calc_voltage_level(cdclk_config->cdclk);
 724 }
 725
 726 static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
 727                           const struct intel_cdclk_config *cdclk_config,
 728                           enum pipe pipe)
 729 {
 730         int cdclk = cdclk_config->cdclk;
 731         u32 val;
 732         int ret;
 733
 734         if (drm_WARN(&dev_priv->drm,
 735                      (intel_de_read(dev_priv, LCPLL_CTL) &
 736                       (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
 737                        LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
 738                        LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
 739                        LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
 740                      "trying to change cdclk frequency with cdclk not enabled\n"))
 741                 return;
 742
 743         ret = sandybridge_pcode_write(dev_priv,
 744                                       BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
 745         if (ret) {
 746                 drm_err(&dev_priv->drm,
 747                         "failed to inform pcode about cdclk change\n");
 748                 return;
 749         }
 750
 751         val = intel_de_read(dev_priv, LCPLL_CTL);
 752         val |= LCPLL_CD_SOURCE_FCLK;
 753         intel_de_write(dev_priv, LCPLL_CTL, val);
 754
 755         /*
 756          * According to the spec, it should be enough to poll for this 1 us.
 757          * However, extensive testing shows that this can take longer.
 758          */
 759         if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) &
 760                         LCPLL_CD_SOURCE_FCLK_DONE, 100))
 761                 drm_err(&dev_priv->drm, "Switching to FCLK failed\n");
 762
 763         val = intel_de_read(dev_priv, LCPLL_CTL);
 764         val &= ~LCPLL_CLK_FREQ_MASK;
 765
 766         switch (cdclk) {
 767         default:
 768                 MISSING_CASE(cdclk);
 769                 fallthrough;
 770         case 337500:
 771                 val |= LCPLL_CLK_FREQ_337_5_BDW;
 772                 break;
 773         case 450000:
 774                 val |= LCPLL_CLK_FREQ_450;
 775                 break;
 776         case 540000:
 777                 val |= LCPLL_CLK_FREQ_54O_BDW;
 778                 break;
 779         case 675000:
 780                 val |= LCPLL_CLK_FREQ_675_BDW;
 781                 break;
 782         }
 783
 784         intel_de_write(dev_priv, LCPLL_CTL, val);
 785
 786         val = intel_de_read(dev_priv, LCPLL_CTL);
 787         val &= ~LCPLL_CD_SOURCE_FCLK;
 788         intel_de_write(dev_priv, LCPLL_CTL, val);
 789
 790         if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) &
 791                          LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
 792                 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
 793
 794         sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
 795                                 cdclk_config->voltage_level);
 796
 797         intel_de_write(dev_priv, CDCLK_FREQ,
 798                        DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
 799
 800         intel_update_cdclk(dev_priv);
 801 }
 802
 803 static int skl_calc_cdclk(int min_cdclk, int vco)
 804 {
 805         if (vco == 8640000) {
 806                 if (min_cdclk > 540000)
 807                         return 617143;
 808                 else if (min_cdclk > 432000)
 809                         return 540000;
 810                 else if (min_cdclk > 308571)
 811                         return 432000;
 812                 else
 813                         return 308571;
 814         } else {
 815                 if (min_cdclk > 540000)
 816                         return 675000;
 817                 else if (min_cdclk > 450000)
 818                         return 540000;
 819                 else if (min_cdclk > 337500)
 820                         return 450000;
 821                 else
 822                         return 337500;
 823         }
 824 }
 825
 826 static u8 skl_calc_voltage_level(int cdclk)
 827 {
 828         if (cdclk > 540000)
 829                 return 3;
 830         else if (cdclk > 450000)
 831                 return 2;
 832         else if (cdclk > 337500)
 833                 return 1;
 834         else
 835                 return 0;
 836 }
 837
 838 static void skl_dpll0_update(struct drm_i915_private *dev_priv,
 839                              struct intel_cdclk_config *cdclk_config)
 840 {
 841         u32 val;
 842
 843         cdclk_config->ref = 24000;
 844         cdclk_config->vco = 0;
 845
 846         val = intel_de_read(dev_priv, LCPLL1_CTL);
 847         if ((val & LCPLL_PLL_ENABLE) == 0)
 848                 return;
 849
 850         if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0))
 851                 return;
 852
 853         val = intel_de_read(dev_priv, DPLL_CTRL1);
 854
 855         if (drm_WARN_ON(&dev_priv->drm,
 856                         (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
 857                                 DPLL_CTRL1_SSC(SKL_DPLL0) |
 858                                 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
 859                         DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
 860                 return;
 861
 862         switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
 863         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
 864         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
 865         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
 866         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
 867                 cdclk_config->vco = 8100000;
 868                 break;
 869         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
 870         case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
 871                 cdclk_config->vco = 8640000;
 872                 break;
 873         default:
 874                 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
 875                 break;
 876         }
 877 }
 878
 879 static void skl_get_cdclk(struct drm_i915_private *dev_priv,
 880                           struct intel_cdclk_config *cdclk_config)
 881 {
 882         u32 cdctl;
 883
 884         skl_dpll0_update(dev_priv, cdclk_config);
 885
 886         cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref;
 887
 888         if (cdclk_config->vco == 0)
 889                 goto out;
 890
 891         cdctl = intel_de_read(dev_priv, CDCLK_CTL);
 892
 893         if (cdclk_config->vco == 8640000) {
 894                 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
 895                 case CDCLK_FREQ_450_432:
 896                         cdclk_config->cdclk = 432000;
 897                         break;
 898                 case CDCLK_FREQ_337_308:
 899                         cdclk_config->cdclk = 308571;
 900                         break;
 901                 case CDCLK_FREQ_540:
 902                         cdclk_config->cdclk = 540000;
 903                         break;
 904                 case CDCLK_FREQ_675_617:
 905                         cdclk_config->cdclk = 617143;
 906                         break;
 907                 default:
 908                         MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
 909                         break;
 910                 }
 911         } else {
 912                 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
 913                 case CDCLK_FREQ_450_432:
 914                         cdclk_config->cdclk = 450000;
 915                         break;
 916                 case CDCLK_FREQ_337_308:
 917                         cdclk_config->cdclk = 337500;
 918                         break;
 919                 case CDCLK_FREQ_540:
 920                         cdclk_config->cdclk = 540000;
 921                         break;
 922                 case CDCLK_FREQ_675_617:
 923                         cdclk_config->cdclk = 675000;
 924                         break;
 925                 default:
 926                         MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
 927                         break;
 928                 }
 929         }
 930
 931  out:
 932         /*
 933          * Can't read this out :( Let's assume it's
 934          * at least what the CDCLK frequency requires.
 935          */
 936         cdclk_config->voltage_level =
 937                 skl_calc_voltage_level(cdclk_config->cdclk);
 938 }
 939
 940 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
 941 static int skl_cdclk_decimal(int cdclk)
 942 {
 943         return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
 944 }
 945
 946 static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
 947                                         int vco)
 948 {
 949         bool changed = dev_priv->skl_preferred_vco_freq != vco;
 950
 951         dev_priv->skl_preferred_vco_freq = vco;
 952
 953         if (changed)
 954                 intel_update_max_cdclk(dev_priv);
 955 }
 956
 957 static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
 958 {
 959         u32 val;
 960
 961         drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
 962
 963         /*
 964          * We always enable DPLL0 with the lowest link rate possible, but still
 965          * taking into account the VCO required to operate the eDP panel at the
 966          * desired frequency. The usual DP link rates operate with a VCO of
 967          * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
 968          * The modeset code is responsible for the selection of the exact link
 969          * rate later on, with the constraint of choosing a frequency that
 970          * works with vco.
 971          */
 972         val = intel_de_read(dev_priv, DPLL_CTRL1);
 973
 974         val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
 975                  DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
 976         val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
 977         if (vco == 8640000)
 978                 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
 979                                             SKL_DPLL0);
 980         else
 981                 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
 982                                             SKL_DPLL0);
 983
 984         intel_de_write(dev_priv, DPLL_CTRL1, val);
 985         intel_de_posting_read(dev_priv, DPLL_CTRL1);
 986
 987         intel_de_write(dev_priv, LCPLL1_CTL,
 988                        intel_de_read(dev_priv, LCPLL1_CTL) | LCPLL_PLL_ENABLE);
 989
 990         if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5))
 991                 drm_err(&dev_priv->drm, "DPLL0 not locked\n");
 992
 993         dev_priv->cdclk.hw.vco = vco;
 994
 995         /* We'll want to keep using the current vco from now on. */
 996         skl_set_preferred_cdclk_vco(dev_priv, vco);
 997 }
 998
 999 static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
1000 {
1001         intel_de_write(dev_priv, LCPLL1_CTL,
1002                        intel_de_read(dev_priv, LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
1003         if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1))
1004                 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n");
1005
1006         dev_priv->cdclk.hw.vco = 0;
1007 }
1008
1009 static void skl_set_cdclk(struct drm_i915_private *dev_priv,
1010                           const struct intel_cdclk_config *cdclk_config,
1011                           enum pipe pipe)
1012 {
1013         int cdclk = cdclk_config->cdclk;
1014         int vco = cdclk_config->vco;
1015         u32 freq_select, cdclk_ctl;
1016         int ret;
1017
1018         /*
1019          * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
1020          * unsupported on SKL. In theory this should never happen since only
1021          * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
1022          * supported on SKL either, see the above WA. WARN whenever trying to
1023          * use the corresponding VCO freq as that always leads to using the
1024          * minimum 308MHz CDCLK.
1025          */
1026         drm_WARN_ON_ONCE(&dev_priv->drm,
1027                          IS_SKYLAKE(dev_priv) && vco == 8640000);
1028
1029         ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1030                                 SKL_CDCLK_PREPARE_FOR_CHANGE,
1031                                 SKL_CDCLK_READY_FOR_CHANGE,
1032                                 SKL_CDCLK_READY_FOR_CHANGE, 3);
1033         if (ret) {
1034                 drm_err(&dev_priv->drm,
1035                         "Failed to inform PCU about cdclk change (%d)\n", ret);
1036                 return;
1037         }
1038
1039         /* Choose frequency for this cdclk */
1040         switch (cdclk) {
1041         default:
1042                 drm_WARN_ON(&dev_priv->drm,
1043                             cdclk != dev_priv->cdclk.hw.bypass);
1044                 drm_WARN_ON(&dev_priv->drm, vco != 0);
1045                 fallthrough;
1046         case 308571:
1047         case 337500:
1048                 freq_select = CDCLK_FREQ_337_308;
1049                 break;
1050         case 450000:
1051         case 432000:
1052                 freq_select = CDCLK_FREQ_450_432;
1053                 break;
1054         case 540000:
1055                 freq_select = CDCLK_FREQ_540;
1056                 break;
1057         case 617143:
1058         case 675000:
1059                 freq_select = CDCLK_FREQ_675_617;
1060                 break;
1061         }
1062
1063         if (dev_priv->cdclk.hw.vco != 0 &&
1064             dev_priv->cdclk.hw.vco != vco)
1065                 skl_dpll0_disable(dev_priv);
1066
1067         cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL);
1068
1069         if (dev_priv->cdclk.hw.vco != vco) {
1070                 /* Wa Display #1183: skl,kbl,cfl */
1071                 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1072                 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1073                 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1074         }
1075
1076         /* Wa Display #1183: skl,kbl,cfl */
1077         cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
1078         intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1079         intel_de_posting_read(dev_priv, CDCLK_CTL);
1080
1081         if (dev_priv->cdclk.hw.vco != vco)
1082                 skl_dpll0_enable(dev_priv, vco);
1083
1084         /* Wa Display #1183: skl,kbl,cfl */
1085         cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1086         intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1087
1088         cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1089         intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1090
1091         /* Wa Display #1183: skl,kbl,cfl */
1092         cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
1093         intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1094         intel_de_posting_read(dev_priv, CDCLK_CTL);
1095
1096         /* inform PCU of the change */
1097         sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1098                                 cdclk_config->voltage_level);
1099
1100         intel_update_cdclk(dev_priv);
1101 }
1102
1103 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1104 {
1105         u32 cdctl, expected;
1106
1107         /*
1108          * check if the pre-os initialized the display
1109          * There is SWF18 scratchpad register defined which is set by the
1110          * pre-os which can be used by the OS drivers to check the status
1111          */
1112         if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
1113                 goto sanitize;
1114
1115         intel_update_cdclk(dev_priv);
1116         intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1117
1118         /* Is PLL enabled and locked ? */
1119         if (dev_priv->cdclk.hw.vco == 0 ||
1120             dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1121                 goto sanitize;
1122
1123         /* DPLL okay; verify the cdclock
1124          *
1125          * Noticed in some instances that the freq selection is correct but
1126          * decimal part is programmed wrong from BIOS where pre-os does not
1127          * enable display. Verify the same as well.
1128          */
1129         cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1130         expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
1131                 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1132         if (cdctl == expected)
1133                 /* All well; nothing to sanitize */
1134                 return;
1135
1136 sanitize:
1137         drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1138
1139         /* force cdclk programming */
1140         dev_priv->cdclk.hw.cdclk = 0;
1141         /* force full PLL disable + enable */
1142         dev_priv->cdclk.hw.vco = -1;
1143 }
1144
1145 static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv)
1146 {
1147         struct intel_cdclk_config cdclk_config;
1148
1149         skl_sanitize_cdclk(dev_priv);
1150
1151         if (dev_priv->cdclk.hw.cdclk != 0 &&
1152             dev_priv->cdclk.hw.vco != 0) {
1153                 /*
1154                  * Use the current vco as our initial
1155                  * guess as to what the preferred vco is.
1156                  */
1157                 if (dev_priv->skl_preferred_vco_freq == 0)
1158                         skl_set_preferred_cdclk_vco(dev_priv,
1159                                                     dev_priv->cdclk.hw.vco);
1160                 return;
1161         }
1162
1163         cdclk_config = dev_priv->cdclk.hw;
1164
1165         cdclk_config.vco = dev_priv->skl_preferred_vco_freq;
1166         if (cdclk_config.vco == 0)
1167                 cdclk_config.vco = 8100000;
1168         cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco);
1169         cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1170
1171         skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1172 }
1173
1174 static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1175 {
1176         struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1177
1178         cdclk_config.cdclk = cdclk_config.bypass;
1179         cdclk_config.vco = 0;
1180         cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1181
1182         skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1183 }
1184
1185 static const struct intel_cdclk_vals bxt_cdclk_table[] = {
1186         { .refclk = 19200, .cdclk = 144000, .divider = 8, .ratio = 60 },
1187         { .refclk = 19200, .cdclk = 288000, .divider = 4, .ratio = 60 },
1188         { .refclk = 19200, .cdclk = 384000, .divider = 3, .ratio = 60 },
1189         { .refclk = 19200, .cdclk = 576000, .divider = 2, .ratio = 60 },
1190         { .refclk = 19200, .cdclk = 624000, .divider = 2, .ratio = 65 },
1191         {}
1192 };
1193
1194 static const struct intel_cdclk_vals glk_cdclk_table[] = {
1195         { .refclk = 19200, .cdclk =  79200, .divider = 8, .ratio = 33 },
1196         { .refclk = 19200, .cdclk = 158400, .divider = 4, .ratio = 33 },
1197         { .refclk = 19200, .cdclk = 316800, .divider = 2, .ratio = 33 },
1198         {}
1199 };
1200
1201 static const struct intel_cdclk_vals cnl_cdclk_table[] = {
1202         { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 },
1203         { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 },
1204         { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 },
1205
1206         { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 },
1207         { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 },
1208         { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 },
1209         {}
1210 };
1211
1212 static const struct intel_cdclk_vals icl_cdclk_table[] = {
1213         { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 },
1214         { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 },
1215         { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 },
1216         { .refclk = 19200, .cdclk = 326400, .divider = 4, .ratio = 68 },
1217         { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 },
1218         { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 },
1219
1220         { .refclk = 24000, .cdclk = 180000, .divider = 2, .ratio = 15 },
1221         { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 },
1222         { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 },
1223         { .refclk = 24000, .cdclk = 324000, .divider = 4, .ratio = 54 },
1224         { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 },
1225         { .refclk = 24000, .cdclk = 648000, .divider = 2, .ratio = 54 },
1226
1227         { .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio =  9 },
1228         { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 },
1229         { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 },
1230         { .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 },
1231         { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 },
1232         { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 },
1233         {}
1234 };
1235
1236 static const struct intel_cdclk_vals rkl_cdclk_table[] = {
1237         { .refclk = 19200, .cdclk = 172800, .divider = 4, .ratio =  36 },
1238         { .refclk = 19200, .cdclk = 192000, .divider = 4, .ratio =  40 },
1239         { .refclk = 19200, .cdclk = 307200, .divider = 4, .ratio =  64 },
1240         { .refclk = 19200, .cdclk = 326400, .divider = 8, .ratio = 136 },
1241         { .refclk = 19200, .cdclk = 556800, .divider = 4, .ratio = 116 },
1242         { .refclk = 19200, .cdclk = 652800, .divider = 4, .ratio = 136 },
1243
1244         { .refclk = 24000, .cdclk = 180000, .divider = 4, .ratio =  30 },
1245         { .refclk = 24000, .cdclk = 192000, .divider = 4, .ratio =  32 },
1246         { .refclk = 24000, .cdclk = 312000, .divider = 4, .ratio =  52 },
1247         { .refclk = 24000, .cdclk = 324000, .divider = 8, .ratio = 108 },
1248         { .refclk = 24000, .cdclk = 552000, .divider = 4, .ratio =  92 },
1249         { .refclk = 24000, .cdclk = 648000, .divider = 4, .ratio = 108 },
1250
1251         { .refclk = 38400, .cdclk = 172800, .divider = 4, .ratio = 18 },
1252         { .refclk = 38400, .cdclk = 192000, .divider = 4, .ratio = 20 },
1253         { .refclk = 38400, .cdclk = 307200, .divider = 4, .ratio = 32 },
1254         { .refclk = 38400, .cdclk = 326400, .divider = 8, .ratio = 68 },
1255         { .refclk = 38400, .cdclk = 556800, .divider = 4, .ratio = 58 },
1256         { .refclk = 38400, .cdclk = 652800, .divider = 4, .ratio = 68 },
1257         {}
1258 };
1259
1260 static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
1261 {
1262         const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1263         int i;
1264
1265         for (i = 0; table[i].refclk; i++)
1266                 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1267                     table[i].cdclk >= min_cdclk)
1268                         return table[i].cdclk;
1269
1270         drm_WARN(&dev_priv->drm, 1,
1271                  "Cannot satisfy minimum cdclk %d with refclk %u\n",
1272                  min_cdclk, dev_priv->cdclk.hw.ref);
1273         return 0;
1274 }
1275
1276 static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1277 {
1278         const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1279         int i;
1280
1281         if (cdclk == dev_priv->cdclk.hw.bypass)
1282                 return 0;
1283
1284         for (i = 0; table[i].refclk; i++)
1285                 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1286                     table[i].cdclk == cdclk)
1287                         return dev_priv->cdclk.hw.ref * table[i].ratio;
1288
1289         drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
1290                  cdclk, dev_priv->cdclk.hw.ref);
1291         return 0;
1292 }
1293
1294 static u8 bxt_calc_voltage_level(int cdclk)
1295 {
1296         return DIV_ROUND_UP(cdclk, 25000);
1297 }
1298
1299 static u8 cnl_calc_voltage_level(int cdclk)
1300 {
1301         if (cdclk > 336000)
1302                 return 2;
1303         else if (cdclk > 168000)
1304                 return 1;
1305         else
1306                 return 0;
1307 }
1308
1309 static u8 icl_calc_voltage_level(int cdclk)
1310 {
1311         if (cdclk > 556800)
1312                 return 2;
1313         else if (cdclk > 312000)
1314                 return 1;
1315         else
1316                 return 0;
1317 }
1318
1319 static u8 ehl_calc_voltage_level(int cdclk)
1320 {
1321         if (cdclk > 326400)
1322                 return 3;
1323         else if (cdclk > 312000)
1324                 return 2;
1325         else if (cdclk > 180000)
1326                 return 1;
1327         else
1328                 return 0;
1329 }
1330
1331 static u8 tgl_calc_voltage_level(int cdclk)
1332 {
1333         if (cdclk > 556800)
1334                 return 3;
1335         else if (cdclk > 326400)
1336                 return 2;
1337         else if (cdclk > 312000)
1338                 return 1;
1339         else
1340                 return 0;
1341 }
1342
1343 static void cnl_readout_refclk(struct drm_i915_private *dev_priv,
1344                                struct intel_cdclk_config *cdclk_config)
1345 {
1346         if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
1347                 cdclk_config->ref = 24000;
1348         else
1349                 cdclk_config->ref = 19200;
1350 }
1351
1352 static void icl_readout_refclk(struct drm_i915_private *dev_priv,
1353                                struct intel_cdclk_config *cdclk_config)
1354 {
1355         u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK;
1356
1357         switch (dssm) {
1358         default:
1359                 MISSING_CASE(dssm);
1360                 fallthrough;
1361         case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz:
1362                 cdclk_config->ref = 24000;
1363                 break;
1364         case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz:
1365                 cdclk_config->ref = 19200;
1366                 break;
1367         case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz:
1368                 cdclk_config->ref = 38400;
1369                 break;
1370         }
1371 }
1372
1373 static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
1374                                struct intel_cdclk_config *cdclk_config)
1375 {
1376         u32 val, ratio;
1377
1378         if (INTEL_GEN(dev_priv) >= 11)
1379                 icl_readout_refclk(dev_priv, cdclk_config);
1380         else if (IS_CANNONLAKE(dev_priv))
1381                 cnl_readout_refclk(dev_priv, cdclk_config);
1382         else
1383                 cdclk_config->ref = 19200;
1384
1385         val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1386         if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 ||
1387             (val & BXT_DE_PLL_LOCK) == 0) {
1388                 /*
1389                  * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but
1390                  * setting it to zero is a way to signal that.
1391                  */
1392                 cdclk_config->vco = 0;
1393                 return;
1394         }
1395
1396         /*
1397          * CNL+ have the ratio directly in the PLL enable register, gen9lp had
1398          * it in a separate PLL control register.
1399          */
1400         if (INTEL_GEN(dev_priv) >= 10)
1401                 ratio = val & CNL_CDCLK_PLL_RATIO_MASK;
1402         else
1403                 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
1404
1405         cdclk_config->vco = ratio * cdclk_config->ref;
1406 }
1407
1408 static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
1409                           struct intel_cdclk_config *cdclk_config)
1410 {
1411         u32 divider;
1412         int div;
1413
1414         bxt_de_pll_readout(dev_priv, cdclk_config);
1415
1416         if (INTEL_GEN(dev_priv) >= 12)
1417                 cdclk_config->bypass = cdclk_config->ref / 2;
1418         else if (INTEL_GEN(dev_priv) >= 11)
1419                 cdclk_config->bypass = 50000;
1420         else
1421                 cdclk_config->bypass = cdclk_config->ref;
1422
1423         if (cdclk_config->vco == 0) {
1424                 cdclk_config->cdclk = cdclk_config->bypass;
1425                 goto out;
1426         }
1427
1428         divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1429
1430         switch (divider) {
1431         case BXT_CDCLK_CD2X_DIV_SEL_1:
1432                 div = 2;
1433                 break;
1434         case BXT_CDCLK_CD2X_DIV_SEL_1_5:
1435                 drm_WARN(&dev_priv->drm,
1436                          IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1437                          "Unsupported divider\n");
1438                 div = 3;
1439                 break;
1440         case BXT_CDCLK_CD2X_DIV_SEL_2:
1441                 div = 4;
1442                 break;
1443         case BXT_CDCLK_CD2X_DIV_SEL_4:
1444                 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1445                          "Unsupported divider\n");
1446                 div = 8;
1447                 break;
1448         default:
1449                 MISSING_CASE(divider);
1450                 return;
1451         }
1452
1453         cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div);
1454
1455  out:
1456         /*
1457          * Can't read this out :( Let's assume it's
1458          * at least what the CDCLK frequency requires.
1459          */
1460         cdclk_config->voltage_level =
1461                 dev_priv->display.calc_voltage_level(cdclk_config->cdclk);
1462 }
1463
1464 static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
1465 {
1466         intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0);
1467
1468         /* Timeout 200us */
1469         if (intel_de_wait_for_clear(dev_priv,
1470                                     BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1471                 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n");
1472
1473         dev_priv->cdclk.hw.vco = 0;
1474 }
1475
1476 static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
1477 {
1478         int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1479         u32 val;
1480
1481         val = intel_de_read(dev_priv, BXT_DE_PLL_CTL);
1482         val &= ~BXT_DE_PLL_RATIO_MASK;
1483         val |= BXT_DE_PLL_RATIO(ratio);
1484         intel_de_write(dev_priv, BXT_DE_PLL_CTL, val);
1485
1486         intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
1487
1488         /* Timeout 200us */
1489         if (intel_de_wait_for_set(dev_priv,
1490                                   BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1491                 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n");
1492
1493         dev_priv->cdclk.hw.vco = vco;
1494 }
1495
1496 static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
1497 {
1498         u32 val;
1499
1500         val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1501         val &= ~BXT_DE_PLL_PLL_ENABLE;
1502         intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1503
1504         /* Timeout 200us */
1505         if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
1506                 drm_err(&dev_priv->drm,
1507                         "timeout waiting for CDCLK PLL unlock\n");
1508
1509         dev_priv->cdclk.hw.vco = 0;
1510 }
1511
1512 static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
1513 {
1514         int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1515         u32 val;
1516
1517         val = CNL_CDCLK_PLL_RATIO(ratio);
1518         intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1519
1520         val |= BXT_DE_PLL_PLL_ENABLE;
1521         intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1522
1523         /* Timeout 200us */
1524         if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
1525                 drm_err(&dev_priv->drm,
1526                         "timeout waiting for CDCLK PLL lock\n");
1527
1528         dev_priv->cdclk.hw.vco = vco;
1529 }
1530
1531 static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
1532 {
1533         if (INTEL_GEN(dev_priv) >= 12) {
1534                 if (pipe == INVALID_PIPE)
1535                         return TGL_CDCLK_CD2X_PIPE_NONE;
1536                 else
1537                         return TGL_CDCLK_CD2X_PIPE(pipe);
1538         } else if (INTEL_GEN(dev_priv) >= 11) {
1539                 if (pipe == INVALID_PIPE)
1540                         return ICL_CDCLK_CD2X_PIPE_NONE;
1541                 else
1542                         return ICL_CDCLK_CD2X_PIPE(pipe);
1543         } else {
1544                 if (pipe == INVALID_PIPE)
1545                         return BXT_CDCLK_CD2X_PIPE_NONE;
1546                 else
1547                         return BXT_CDCLK_CD2X_PIPE(pipe);
1548         }
1549 }
1550
1551 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
1552                           const struct intel_cdclk_config *cdclk_config,
1553                           enum pipe pipe)
1554 {
1555         int cdclk = cdclk_config->cdclk;
1556         int vco = cdclk_config->vco;
1557         u32 val, divider;
1558         int ret;
1559
1560         /* Inform power controller of upcoming frequency change. */
1561         if (INTEL_GEN(dev_priv) >= 10)
1562                 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1563                                         SKL_CDCLK_PREPARE_FOR_CHANGE,
1564                                         SKL_CDCLK_READY_FOR_CHANGE,
1565                                         SKL_CDCLK_READY_FOR_CHANGE, 3);
1566         else
1567                 /*
1568                  * BSpec requires us to wait up to 150usec, but that leads to
1569                  * timeouts; the 2ms used here is based on experiment.
1570                  */
1571                 ret = sandybridge_pcode_write_timeout(dev_priv,
1572                                                       HSW_PCODE_DE_WRITE_FREQ_REQ,
1573                                                       0x80000000, 150, 2);
1574
1575         if (ret) {
1576                 drm_err(&dev_priv->drm,
1577                         "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
1578                         ret, cdclk);
1579                 return;
1580         }
1581
1582         /* cdclk = vco / 2 / div{1,1.5,2,4} */
1583         switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
1584         default:
1585                 drm_WARN_ON(&dev_priv->drm,
1586                             cdclk != dev_priv->cdclk.hw.bypass);
1587                 drm_WARN_ON(&dev_priv->drm, vco != 0);
1588                 fallthrough;
1589         case 2:
1590                 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
1591                 break;
1592         case 3:
1593                 drm_WARN(&dev_priv->drm,
1594                          IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1595                          "Unsupported divider\n");
1596                 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
1597                 break;
1598         case 4:
1599                 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
1600                 break;
1601         case 8:
1602                 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1603                          "Unsupported divider\n");
1604                 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
1605                 break;
1606         }
1607
1608         if (INTEL_GEN(dev_priv) >= 10) {
1609                 if (dev_priv->cdclk.hw.vco != 0 &&
1610                     dev_priv->cdclk.hw.vco != vco)
1611                         cnl_cdclk_pll_disable(dev_priv);
1612
1613                 if (dev_priv->cdclk.hw.vco != vco)
1614                         cnl_cdclk_pll_enable(dev_priv, vco);
1615
1616         } else {
1617                 if (dev_priv->cdclk.hw.vco != 0 &&
1618                     dev_priv->cdclk.hw.vco != vco)
1619                         bxt_de_pll_disable(dev_priv);
1620
1621                 if (dev_priv->cdclk.hw.vco != vco)
1622                         bxt_de_pll_enable(dev_priv, vco);
1623         }
1624
1625         val = divider | skl_cdclk_decimal(cdclk) |
1626                 bxt_cdclk_cd2x_pipe(dev_priv, pipe);
1627
1628         /*
1629          * Disable SSA Precharge when CD clock frequency < 500 MHz,
1630          * enable otherwise.
1631          */
1632         if (IS_GEN9_LP(dev_priv) && cdclk >= 500000)
1633                 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1634         intel_de_write(dev_priv, CDCLK_CTL, val);
1635
1636         if (pipe != INVALID_PIPE)
1637                 intel_wait_for_vblank(dev_priv, pipe);
1638
1639         if (INTEL_GEN(dev_priv) >= 10) {
1640                 ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1641                                               cdclk_config->voltage_level);
1642         } else {
1643                 /*
1644                  * The timeout isn't specified, the 2ms used here is based on
1645                  * experiment.
1646                  * FIXME: Waiting for the request completion could be delayed
1647                  * until the next PCODE request based on BSpec.
1648                  */
1649                 ret = sandybridge_pcode_write_timeout(dev_priv,
1650                                                       HSW_PCODE_DE_WRITE_FREQ_REQ,
1651                                                       cdclk_config->voltage_level,
1652                                                       150, 2);
1653         }
1654
1655         if (ret) {
1656                 drm_err(&dev_priv->drm,
1657                         "PCode CDCLK freq set failed, (err %d, freq %d)\n",
1658                         ret, cdclk);
1659                 return;
1660         }
1661
1662         intel_update_cdclk(dev_priv);
1663
1664         if (INTEL_GEN(dev_priv) >= 10)
1665                 /*
1666                  * Can't read out the voltage level :(
1667                  * Let's just assume everything is as expected.
1668                  */
1669                 dev_priv->cdclk.hw.voltage_level = cdclk_config->voltage_level;
1670 }
1671
1672 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
1673 {
1674         u32 cdctl, expected;
1675         int cdclk, vco;
1676
1677         intel_update_cdclk(dev_priv);
1678         intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1679
1680         if (dev_priv->cdclk.hw.vco == 0 ||
1681             dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1682                 goto sanitize;
1683
1684         /* DPLL okay; verify the cdclock
1685          *
1686          * Some BIOS versions leave an incorrect decimal frequency value and
1687          * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
1688          * so sanitize this register.
1689          */
1690         cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1691         /*
1692          * Let's ignore the pipe field, since BIOS could have configured the
1693          * dividers both synching to an active pipe, or asynchronously
1694          * (PIPE_NONE).
1695          */
1696         cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
1697
1698         /* Make sure this is a legal cdclk value for the platform */
1699         cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
1700         if (cdclk != dev_priv->cdclk.hw.cdclk)
1701                 goto sanitize;
1702
1703         /* Make sure the VCO is correct for the cdclk */
1704         vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
1705         if (vco != dev_priv->cdclk.hw.vco)
1706                 goto sanitize;
1707
1708         expected = skl_cdclk_decimal(cdclk);
1709
1710         /* Figure out what CD2X divider we should be using for this cdclk */
1711         switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco,
1712                                   dev_priv->cdclk.hw.cdclk)) {
1713         case 2:
1714                 expected |= BXT_CDCLK_CD2X_DIV_SEL_1;
1715                 break;
1716         case 3:
1717                 expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5;
1718                 break;
1719         case 4:
1720                 expected |= BXT_CDCLK_CD2X_DIV_SEL_2;
1721                 break;
1722         case 8:
1723                 expected |= BXT_CDCLK_CD2X_DIV_SEL_4;
1724                 break;
1725         default:
1726                 goto sanitize;
1727         }
1728
1729         /*
1730          * Disable SSA Precharge when CD clock frequency < 500 MHz,
1731          * enable otherwise.
1732          */
1733         if (IS_GEN9_LP(dev_priv) && dev_priv->cdclk.hw.cdclk >= 500000)
1734                 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1735
1736         if (cdctl == expected)
1737                 /* All well; nothing to sanitize */
1738                 return;
1739
1740 sanitize:
1741         drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1742
1743         /* force cdclk programming */
1744         dev_priv->cdclk.hw.cdclk = 0;
1745
1746         /* force full PLL disable + enable */
1747         dev_priv->cdclk.hw.vco = -1;
1748 }
1749
1750 static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv)
1751 {
1752         struct intel_cdclk_config cdclk_config;
1753
1754         bxt_sanitize_cdclk(dev_priv);
1755
1756         if (dev_priv->cdclk.hw.cdclk != 0 &&
1757             dev_priv->cdclk.hw.vco != 0)
1758                 return;
1759
1760         cdclk_config = dev_priv->cdclk.hw;
1761
1762         /*
1763          * FIXME:
1764          * - The initial CDCLK needs to be read from VBT.
1765          *   Need to make this change after VBT has changes for BXT.
1766          */
1767         cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0);
1768         cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk);
1769         cdclk_config.voltage_level =
1770                 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1771
1772         bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1773 }
1774
1775 static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1776 {
1777         struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1778
1779         cdclk_config.cdclk = cdclk_config.bypass;
1780         cdclk_config.vco = 0;
1781         cdclk_config.voltage_level =
1782                 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1783
1784         bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1785 }
1786
1787 /**
1788  * intel_cdclk_init_hw - Initialize CDCLK hardware
1789  * @i915: i915 device
1790  *
1791  * Initialize CDCLK. This consists mainly of initializing dev_priv->cdclk.hw and
1792  * sanitizing the state of the hardware if needed. This is generally done only
1793  * during the display core initialization sequence, after which the DMC will
1794  * take care of turning CDCLK off/on as needed.
1795  */
1796 void intel_cdclk_init_hw(struct drm_i915_private *i915)
1797 {
1798         if (IS_GEN9_LP(i915) || INTEL_GEN(i915) >= 10)
1799                 bxt_cdclk_init_hw(i915);
1800         else if (IS_GEN9_BC(i915))
1801                 skl_cdclk_init_hw(i915);
1802 }
1803
1804 /**
1805  * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware
1806  * @i915: i915 device
1807  *
1808  * Uninitialize CDCLK. This is done only during the display core
1809  * uninitialization sequence.
1810  */
1811 void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
1812 {
1813         if (INTEL_GEN(i915) >= 10 || IS_GEN9_LP(i915))
1814                 bxt_cdclk_uninit_hw(i915);
1815         else if (IS_GEN9_BC(i915))
1816                 skl_cdclk_uninit_hw(i915);
1817 }
1818
1819 /**
1820  * intel_cdclk_needs_modeset - Determine if changong between the CDCLK
1821  *                             configurations requires a modeset on all pipes
1822  * @a: first CDCLK configuration
1823  * @b: second CDCLK configuration
1824  *
1825  * Returns:
1826  * True if changing between the two CDCLK configurations
1827  * requires all pipes to be off, false if not.
1828  */
1829 bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
1830                                const struct intel_cdclk_config *b)
1831 {
1832         return a->cdclk != b->cdclk ||
1833                 a->vco != b->vco ||
1834                 a->ref != b->ref;
1835 }
1836
1837 /**
1838  * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK
1839  *                               configurations requires only a cd2x divider update
1840  * @dev_priv: i915 device
1841  * @a: first CDCLK configuration
1842  * @b: second CDCLK configuration
1843  *
1844  * Returns:
1845  * True if changing between the two CDCLK configurations
1846  * can be done with just a cd2x divider update, false if not.
1847  */
1848 static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv,
1849                                         const struct intel_cdclk_config *a,
1850                                         const struct intel_cdclk_config *b)
1851 {
1852         /* Older hw doesn't have the capability */
1853         if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
1854                 return false;
1855
1856         return a->cdclk != b->cdclk &&
1857                 a->vco == b->vco &&
1858                 a->ref == b->ref;
1859 }
1860
1861 /**
1862  * intel_cdclk_changed - Determine if two CDCLK configurations are different
1863  * @a: first CDCLK configuration
1864  * @b: second CDCLK configuration
1865  *
1866  * Returns:
1867  * True if the CDCLK configurations don't match, false if they do.
1868  */
1869 static bool intel_cdclk_changed(const struct intel_cdclk_config *a,
1870                                 const struct intel_cdclk_config *b)
1871 {
1872         return intel_cdclk_needs_modeset(a, b) ||
1873                 a->voltage_level != b->voltage_level;
1874 }
1875
1876 void intel_dump_cdclk_config(const struct intel_cdclk_config *cdclk_config,
1877                              const char *context)
1878 {
1879         DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n",
1880                          context, cdclk_config->cdclk, cdclk_config->vco,
1881                          cdclk_config->ref, cdclk_config->bypass,
1882                          cdclk_config->voltage_level);
1883 }
1884
1885 /**
1886  * intel_set_cdclk - Push the CDCLK configuration to the hardware
1887  * @dev_priv: i915 device
1888  * @cdclk_config: new CDCLK configuration
1889  * @pipe: pipe with which to synchronize the update
1890  *
1891  * Program the hardware based on the passed in CDCLK state,
1892  * if necessary.
1893  */
1894 static void intel_set_cdclk(struct drm_i915_private *dev_priv,
1895                             const struct intel_cdclk_config *cdclk_config,
1896                             enum pipe pipe)
1897 {
1898         struct intel_encoder *encoder;
1899
1900         if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config))
1901                 return;
1902
1903         if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.set_cdclk))
1904                 return;
1905
1906         intel_dump_cdclk_config(cdclk_config, "Changing CDCLK to");
1907
1908         /*
1909          * Lock aux/gmbus while we change cdclk in case those
1910          * functions use cdclk. Not all platforms/ports do,
1911          * but we'll lock them all for simplicity.
1912          */
1913         mutex_lock(&dev_priv->gmbus_mutex);
1914         for_each_intel_dp(&dev_priv->drm, encoder) {
1915                 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1916
1917                 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex,
1918                                      &dev_priv->gmbus_mutex);
1919         }
1920
1921         dev_priv->display.set_cdclk(dev_priv, cdclk_config, pipe);
1922
1923         for_each_intel_dp(&dev_priv->drm, encoder) {
1924                 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1925
1926                 mutex_unlock(&intel_dp->aux.hw_mutex);
1927         }
1928         mutex_unlock(&dev_priv->gmbus_mutex);
1929
1930         if (drm_WARN(&dev_priv->drm,
1931                      intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
1932                      "cdclk state doesn't match!\n")) {
1933                 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "[hw state]");
1934                 intel_dump_cdclk_config(cdclk_config, "[sw state]");
1935         }
1936 }
1937
1938 /**
1939  * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
1940  * @state: intel atomic state
1941  *
1942  * Program the hardware before updating the HW plane state based on the
1943  * new CDCLK state, if necessary.
1944  */
1945 void
1946 intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
1947 {
1948         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1949         const struct intel_cdclk_state *old_cdclk_state =
1950                 intel_atomic_get_old_cdclk_state(state);
1951         const struct intel_cdclk_state *new_cdclk_state =
1952                 intel_atomic_get_new_cdclk_state(state);
1953         enum pipe pipe = new_cdclk_state->pipe;
1954
1955         if (!intel_cdclk_changed(&old_cdclk_state->actual,
1956                                  &new_cdclk_state->actual))
1957                 return;
1958
1959         if (pipe == INVALID_PIPE ||
1960             old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
1961                 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1962
1963                 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1964         }
1965 }
1966
1967 /**
1968  * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
1969  * @state: intel atomic state
1970  *
1971  * Program the hardware after updating the HW plane state based on the
1972  * new CDCLK state, if necessary.
1973  */
1974 void
1975 intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
1976 {
1977         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1978         const struct intel_cdclk_state *old_cdclk_state =
1979                 intel_atomic_get_old_cdclk_state(state);
1980         const struct intel_cdclk_state *new_cdclk_state =
1981                 intel_atomic_get_new_cdclk_state(state);
1982         enum pipe pipe = new_cdclk_state->pipe;
1983
1984         if (!intel_cdclk_changed(&old_cdclk_state->actual,
1985                                  &new_cdclk_state->actual))
1986                 return;
1987
1988         if (pipe != INVALID_PIPE &&
1989             old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
1990                 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1991
1992                 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1993         }
1994 }
1995
1996 static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
1997 {
1998         struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
1999         int pixel_rate = crtc_state->pixel_rate;
2000
2001         if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
2002                 return DIV_ROUND_UP(pixel_rate, 2);
2003         else if (IS_GEN(dev_priv, 9) ||
2004                  IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2005                 return pixel_rate;
2006         else if (IS_CHERRYVIEW(dev_priv))
2007                 return DIV_ROUND_UP(pixel_rate * 100, 95);
2008         else if (crtc_state->double_wide)
2009                 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2);
2010         else
2011                 return DIV_ROUND_UP(pixel_rate * 100, 90);
2012 }
2013
2014 static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state)
2015 {
2016         struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
2017         struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
2018         struct intel_plane *plane;
2019         int min_cdclk = 0;
2020
2021         for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
2022                 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk);
2023
2024         return min_cdclk;
2025 }
2026
2027 int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
2028 {
2029         struct drm_i915_private *dev_priv =
2030                 to_i915(crtc_state->uapi.crtc->dev);
2031         int min_cdclk;
2032
2033         if (!crtc_state->hw.enable)
2034                 return 0;
2035
2036         min_cdclk = intel_pixel_rate_to_cdclk(crtc_state);
2037
2038         /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
2039         if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state))
2040                 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95);
2041
2042         /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz,
2043          * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else
2044          * there may be audio corruption or screen corruption." This cdclk
2045          * restriction for GLK is 316.8 MHz.
2046          */
2047         if (intel_crtc_has_dp_encoder(crtc_state) &&
2048             crtc_state->has_audio &&
2049             crtc_state->port_clock >= 540000 &&
2050             crtc_state->lane_count == 4) {
2051                 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
2052                         /* Display WA #1145: glk,cnl */
2053                         min_cdclk = max(316800, min_cdclk);
2054                 } else if (IS_GEN(dev_priv, 9) || IS_BROADWELL(dev_priv)) {
2055                         /* Display WA #1144: skl,bxt */
2056                         min_cdclk = max(432000, min_cdclk);
2057                 }
2058         }
2059
2060         /*
2061          * According to BSpec, "The CD clock frequency must be at least twice
2062          * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
2063          */
2064         if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
2065                 min_cdclk = max(2 * 96000, min_cdclk);
2066
2067         /*
2068          * "For DP audio configuration, cdclk frequency shall be set to
2069          *  meet the following requirements:
2070          *  DP Link Frequency(MHz) | Cdclk frequency(MHz)
2071          *  270                    | 320 or higher
2072          *  162                    | 200 or higher"
2073          */
2074         if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
2075             intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio)
2076                 min_cdclk = max(crtc_state->port_clock, min_cdclk);
2077
2078         /*
2079          * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
2080          * than 320000KHz.
2081          */
2082         if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2083             IS_VALLEYVIEW(dev_priv))
2084                 min_cdclk = max(320000, min_cdclk);
2085
2086         /*
2087          * On Geminilake once the CDCLK gets as low as 79200
2088          * picture gets unstable, despite that values are
2089          * correct for DSI PLL and DE PLL.
2090          */
2091         if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2092             IS_GEMINILAKE(dev_priv))
2093                 min_cdclk = max(158400, min_cdclk);
2094
2095         /* Account for additional needs from the planes */
2096         min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
2097
2098         /*
2099          * HACK. Currently for TGL platforms we calculate
2100          * min_cdclk initially based on pixel_rate divided
2101          * by 2, accounting for also plane requirements,
2102          * however in some cases the lowest possible CDCLK
2103          * doesn't work and causing the underruns.
2104          * Explicitly stating here that this seems to be currently
2105          * rather a Hack, than final solution.
2106          */
2107         if (IS_TIGERLAKE(dev_priv)) {
2108                 /*
2109                  * Clamp to max_cdclk_freq in case pixel rate is higher,
2110                  * in order not to break an 8K, but still leave W/A at place.
2111                  */
2112                 min_cdclk = max_t(int, min_cdclk,
2113                                   min_t(int, crtc_state->pixel_rate,
2114                                         dev_priv->max_cdclk_freq));
2115         }
2116
2117         if (min_cdclk > dev_priv->max_cdclk_freq) {
2118                 drm_dbg_kms(&dev_priv->drm,
2119                             "required cdclk (%d kHz) exceeds max (%d kHz)\n",
2120                             min_cdclk, dev_priv->max_cdclk_freq);
2121                 return -EINVAL;
2122         }
2123
2124         return min_cdclk;
2125 }
2126
2127 static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
2128 {
2129         struct intel_atomic_state *state = cdclk_state->base.state;
2130         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2131         struct intel_bw_state *bw_state = NULL;
2132         struct intel_crtc *crtc;
2133         struct intel_crtc_state *crtc_state;
2134         int min_cdclk, i;
2135         enum pipe pipe;
2136
2137         for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2138                 int ret;
2139
2140                 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
2141                 if (min_cdclk < 0)
2142                         return min_cdclk;
2143
2144                 bw_state = intel_atomic_get_bw_state(state);
2145                 if (IS_ERR(bw_state))
2146                         return PTR_ERR(bw_state);
2147
2148                 if (cdclk_state->min_cdclk[i] == min_cdclk)
2149                         continue;
2150
2151                 cdclk_state->min_cdclk[i] = min_cdclk;
2152
2153                 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2154                 if (ret)
2155                         return ret;
2156         }
2157
2158         min_cdclk = cdclk_state->force_min_cdclk;
2159         for_each_pipe(dev_priv, pipe) {
2160                 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk);
2161
2162                 if (!bw_state)
2163                         continue;
2164
2165                 min_cdclk = max(bw_state->min_cdclk, min_cdclk);
2166         }
2167
2168         return min_cdclk;
2169 }
2170
2171 /*
2172  * Account for port clock min voltage level requirements.
2173  * This only really does something on CNL+ but can be
2174  * called on earlier platforms as well.
2175  *
2176  * Note that this functions assumes that 0 is
2177  * the lowest voltage value, and higher values
2178  * correspond to increasingly higher voltages.
2179  *
2180  * Should that relationship no longer hold on
2181  * future platforms this code will need to be
2182  * adjusted.
2183  */
2184 static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state)
2185 {
2186         struct intel_atomic_state *state = cdclk_state->base.state;
2187         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2188         struct intel_crtc *crtc;
2189         struct intel_crtc_state *crtc_state;
2190         u8 min_voltage_level;
2191         int i;
2192         enum pipe pipe;
2193
2194         for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2195                 int ret;
2196
2197                 if (crtc_state->hw.enable)
2198                         min_voltage_level = crtc_state->min_voltage_level;
2199                 else
2200                         min_voltage_level = 0;
2201
2202                 if (cdclk_state->min_voltage_level[i] == min_voltage_level)
2203                         continue;
2204
2205                 cdclk_state->min_voltage_level[i] = min_voltage_level;
2206
2207                 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2208                 if (ret)
2209                         return ret;
2210         }
2211
2212         min_voltage_level = 0;
2213         for_each_pipe(dev_priv, pipe)
2214                 min_voltage_level = max(cdclk_state->min_voltage_level[pipe],
2215                                         min_voltage_level);
2216
2217         return min_voltage_level;
2218 }
2219
2220 static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2221 {
2222         struct intel_atomic_state *state = cdclk_state->base.state;
2223         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2224         int min_cdclk, cdclk;
2225
2226         min_cdclk = intel_compute_min_cdclk(cdclk_state);
2227         if (min_cdclk < 0)
2228                 return min_cdclk;
2229
2230         cdclk = vlv_calc_cdclk(dev_priv, min_cdclk);
2231
2232         cdclk_state->logical.cdclk = cdclk;
2233         cdclk_state->logical.voltage_level =
2234                 vlv_calc_voltage_level(dev_priv, cdclk);
2235
2236         if (!cdclk_state->active_pipes) {
2237                 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2238
2239                 cdclk_state->actual.cdclk = cdclk;
2240                 cdclk_state->actual.voltage_level =
2241                         vlv_calc_voltage_level(dev_priv, cdclk);
2242         } else {
2243                 cdclk_state->actual = cdclk_state->logical;
2244         }
2245
2246         return 0;
2247 }
2248
2249 static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2250 {
2251         int min_cdclk, cdclk;
2252
2253         min_cdclk = intel_compute_min_cdclk(cdclk_state);
2254         if (min_cdclk < 0)
2255                 return min_cdclk;
2256
2257         /*
2258          * FIXME should also account for plane ratio
2259          * once 64bpp pixel formats are supported.
2260          */
2261         cdclk = bdw_calc_cdclk(min_cdclk);
2262
2263         cdclk_state->logical.cdclk = cdclk;
2264         cdclk_state->logical.voltage_level =
2265                 bdw_calc_voltage_level(cdclk);
2266
2267         if (!cdclk_state->active_pipes) {
2268                 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk);
2269
2270                 cdclk_state->actual.cdclk = cdclk;
2271                 cdclk_state->actual.voltage_level =
2272                         bdw_calc_voltage_level(cdclk);
2273         } else {
2274                 cdclk_state->actual = cdclk_state->logical;
2275         }
2276
2277         return 0;
2278 }
2279
2280 static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state)
2281 {
2282         struct intel_atomic_state *state = cdclk_state->base.state;
2283         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2284         struct intel_crtc *crtc;
2285         struct intel_crtc_state *crtc_state;
2286         int vco, i;
2287
2288         vco = cdclk_state->logical.vco;
2289         if (!vco)
2290                 vco = dev_priv->skl_preferred_vco_freq;
2291
2292         for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2293                 if (!crtc_state->hw.enable)
2294                         continue;
2295
2296                 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
2297                         continue;
2298
2299                 /*
2300                  * DPLL0 VCO may need to be adjusted to get the correct
2301                  * clock for eDP. This will affect cdclk as well.
2302                  */
2303                 switch (crtc_state->port_clock / 2) {
2304                 case 108000:
2305                 case 216000:
2306                         vco = 8640000;
2307                         break;
2308                 default:
2309                         vco = 8100000;
2310                         break;
2311                 }
2312         }
2313
2314         return vco;
2315 }
2316
2317 static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2318 {
2319         int min_cdclk, cdclk, vco;
2320
2321         min_cdclk = intel_compute_min_cdclk(cdclk_state);
2322         if (min_cdclk < 0)
2323                 return min_cdclk;
2324
2325         vco = skl_dpll0_vco(cdclk_state);
2326
2327         /*
2328          * FIXME should also account for plane ratio
2329          * once 64bpp pixel formats are supported.
2330          */
2331         cdclk = skl_calc_cdclk(min_cdclk, vco);
2332
2333         cdclk_state->logical.vco = vco;
2334         cdclk_state->logical.cdclk = cdclk;
2335         cdclk_state->logical.voltage_level =
2336                 skl_calc_voltage_level(cdclk);
2337
2338         if (!cdclk_state->active_pipes) {
2339                 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco);
2340
2341                 cdclk_state->actual.vco = vco;
2342                 cdclk_state->actual.cdclk = cdclk;
2343                 cdclk_state->actual.voltage_level =
2344                         skl_calc_voltage_level(cdclk);
2345         } else {
2346                 cdclk_state->actual = cdclk_state->logical;
2347         }
2348
2349         return 0;
2350 }
2351
2352 static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2353 {
2354         struct intel_atomic_state *state = cdclk_state->base.state;
2355         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2356         int min_cdclk, min_voltage_level, cdclk, vco;
2357
2358         min_cdclk = intel_compute_min_cdclk(cdclk_state);
2359         if (min_cdclk < 0)
2360                 return min_cdclk;
2361
2362         min_voltage_level = bxt_compute_min_voltage_level(cdclk_state);
2363         if (min_voltage_level < 0)
2364                 return min_voltage_level;
2365
2366         cdclk = bxt_calc_cdclk(dev_priv, min_cdclk);
2367         vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2368
2369         cdclk_state->logical.vco = vco;
2370         cdclk_state->logical.cdclk = cdclk;
2371         cdclk_state->logical.voltage_level =
2372                 max_t(int, min_voltage_level,
2373                       dev_priv->display.calc_voltage_level(cdclk));
2374
2375         if (!cdclk_state->active_pipes) {
2376                 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2377                 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2378
2379                 cdclk_state->actual.vco = vco;
2380                 cdclk_state->actual.cdclk = cdclk;
2381                 cdclk_state->actual.voltage_level =
2382                         dev_priv->display.calc_voltage_level(cdclk);
2383         } else {
2384                 cdclk_state->actual = cdclk_state->logical;
2385         }
2386
2387         return 0;
2388 }
2389
2390 static int intel_modeset_all_pipes(struct intel_atomic_state *state)
2391 {
2392         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2393         struct intel_crtc *crtc;
2394
2395         /*
2396          * Add all pipes to the state, and force
2397          * a modeset on all the active ones.
2398          */
2399         for_each_intel_crtc(&dev_priv->drm, crtc) {
2400                 struct intel_crtc_state *crtc_state;
2401                 int ret;
2402
2403                 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2404                 if (IS_ERR(crtc_state))
2405                         return PTR_ERR(crtc_state);
2406
2407                 if (!crtc_state->hw.active ||
2408                     drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2409                         continue;
2410
2411                 crtc_state->uapi.mode_changed = true;
2412
2413                 ret = drm_atomic_add_affected_connectors(&state->base,
2414                                                          &crtc->base);
2415                 if (ret)
2416                         return ret;
2417
2418                 ret = drm_atomic_add_affected_planes(&state->base,
2419                                                      &crtc->base);
2420                 if (ret)
2421                         return ret;
2422
2423                 crtc_state->update_planes |= crtc_state->active_planes;
2424         }
2425
2426         return 0;
2427 }
2428
2429 static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2430 {
2431         int min_cdclk;
2432
2433         /*
2434          * We can't change the cdclk frequency, but we still want to
2435          * check that the required minimum frequency doesn't exceed
2436          * the actual cdclk frequency.
2437          */
2438         min_cdclk = intel_compute_min_cdclk(cdclk_state);
2439         if (min_cdclk < 0)
2440                 return min_cdclk;
2441
2442         return 0;
2443 }
2444
2445 static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj)
2446 {
2447         struct intel_cdclk_state *cdclk_state;
2448
2449         cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL);
2450         if (!cdclk_state)
2451                 return NULL;
2452
2453         cdclk_state->pipe = INVALID_PIPE;
2454
2455         return &cdclk_state->base;
2456 }
2457
2458 static void intel_cdclk_destroy_state(struct intel_global_obj *obj,
2459                                       struct intel_global_state *state)
2460 {
2461         kfree(state);
2462 }
2463
2464 static const struct intel_global_state_funcs intel_cdclk_funcs = {
2465         .atomic_duplicate_state = intel_cdclk_duplicate_state,
2466         .atomic_destroy_state = intel_cdclk_destroy_state,
2467 };
2468
2469 struct intel_cdclk_state *
2470 intel_atomic_get_cdclk_state(struct intel_atomic_state *state)
2471 {
2472         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2473         struct intel_global_state *cdclk_state;
2474
2475         cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->cdclk.obj);
2476         if (IS_ERR(cdclk_state))
2477                 return ERR_CAST(cdclk_state);
2478
2479         return to_intel_cdclk_state(cdclk_state);
2480 }
2481
2482 int intel_cdclk_init(struct drm_i915_private *dev_priv)
2483 {
2484         struct intel_cdclk_state *cdclk_state;
2485
2486         cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL);
2487         if (!cdclk_state)
2488                 return -ENOMEM;
2489
2490         intel_atomic_global_obj_init(dev_priv, &dev_priv->cdclk.obj,
2491                                      &cdclk_state->base, &intel_cdclk_funcs);
2492
2493         return 0;
2494 }
2495
2496 int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
2497 {
2498         struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2499         const struct intel_cdclk_state *old_cdclk_state;
2500         struct intel_cdclk_state *new_cdclk_state;
2501         enum pipe pipe;
2502         int ret;
2503
2504         new_cdclk_state = intel_atomic_get_cdclk_state(state);
2505         if (IS_ERR(new_cdclk_state))
2506                 return PTR_ERR(new_cdclk_state);
2507
2508         old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
2509
2510         new_cdclk_state->active_pipes =
2511                 intel_calc_active_pipes(state, old_cdclk_state->active_pipes);
2512
2513         ret = dev_priv->display.modeset_calc_cdclk(new_cdclk_state);
2514         if (ret)
2515                 return ret;
2516
2517         if (intel_cdclk_changed(&old_cdclk_state->actual,
2518                                 &new_cdclk_state->actual)) {
2519                 /*
2520                  * Also serialize commits across all crtcs
2521                  * if the actual hw needs to be poked.
2522                  */
2523                 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base);
2524                 if (ret)
2525                         return ret;
2526         } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes ||
2527                    old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk ||
2528                    intel_cdclk_changed(&old_cdclk_state->logical,
2529                                        &new_cdclk_state->logical)) {
2530                 ret = intel_atomic_lock_global_state(&new_cdclk_state->base);
2531                 if (ret)
2532                         return ret;
2533         } else {
2534                 return 0;
2535         }
2536
2537         if (is_power_of_2(new_cdclk_state->active_pipes) &&
2538             intel_cdclk_can_cd2x_update(dev_priv,
2539                                         &old_cdclk_state->actual,
2540                                         &new_cdclk_state->actual)) {
2541                 struct intel_crtc *crtc;
2542                 struct intel_crtc_state *crtc_state;
2543
2544                 pipe = ilog2(new_cdclk_state->active_pipes);
2545                 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
2546
2547                 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2548                 if (IS_ERR(crtc_state))
2549                         return PTR_ERR(crtc_state);
2550
2551                 if (drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2552                         pipe = INVALID_PIPE;
2553         } else {
2554                 pipe = INVALID_PIPE;
2555         }
2556
2557         if (pipe != INVALID_PIPE) {
2558                 new_cdclk_state->pipe = pipe;
2559
2560                 drm_dbg_kms(&dev_priv->drm,
2561                             "Can change cdclk with pipe %c active\n",
2562                             pipe_name(pipe));
2563         } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual,
2564                                              &new_cdclk_state->actual)) {
2565                 /* All pipes must be switched off while we change the cdclk. */
2566                 ret = intel_modeset_all_pipes(state);
2567                 if (ret)
2568                         return ret;
2569
2570                 new_cdclk_state->pipe = INVALID_PIPE;
2571
2572                 drm_dbg_kms(&dev_priv->drm,
2573                             "Modeset required for cdclk change\n");
2574         }
2575
2576         drm_dbg_kms(&dev_priv->drm,
2577                     "New cdclk calculated to be logical %u kHz, actual %u kHz\n",
2578                     new_cdclk_state->logical.cdclk,
2579                     new_cdclk_state->actual.cdclk);
2580         drm_dbg_kms(&dev_priv->drm,
2581                     "New voltage level calculated to be logical %u, actual %u\n",
2582                     new_cdclk_state->logical.voltage_level,
2583                     new_cdclk_state->actual.voltage_level);
2584
2585         return 0;
2586 }
2587
2588 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
2589 {
2590         int max_cdclk_freq = dev_priv->max_cdclk_freq;
2591
2592         if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
2593                 return 2 * max_cdclk_freq;
2594         else if (IS_GEN(dev_priv, 9) ||
2595                  IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2596                 return max_cdclk_freq;
2597         else if (IS_CHERRYVIEW(dev_priv))
2598                 return max_cdclk_freq*95/100;
2599         else if (INTEL_GEN(dev_priv) < 4)
2600                 return 2*max_cdclk_freq*90/100;
2601         else
2602                 return max_cdclk_freq*90/100;
2603 }
2604
2605 /**
2606  * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
2607  * @dev_priv: i915 device
2608  *
2609  * Determine the maximum CDCLK frequency the platform supports, and also
2610  * derive the maximum dot clock frequency the maximum CDCLK frequency
2611  * allows.
2612  */
2613 void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
2614 {
2615         if (IS_JSL_EHL(dev_priv)) {
2616                 if (dev_priv->cdclk.hw.ref == 24000)
2617                         dev_priv->max_cdclk_freq = 552000;
2618                 else
2619                         dev_priv->max_cdclk_freq = 556800;
2620         } else if (INTEL_GEN(dev_priv) >= 11) {
2621                 if (dev_priv->cdclk.hw.ref == 24000)
2622                         dev_priv->max_cdclk_freq = 648000;
2623                 else
2624                         dev_priv->max_cdclk_freq = 652800;
2625         } else if (IS_CANNONLAKE(dev_priv)) {
2626                 dev_priv->max_cdclk_freq = 528000;
2627         } else if (IS_GEN9_BC(dev_priv)) {
2628                 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
2629                 int max_cdclk, vco;
2630
2631                 vco = dev_priv->skl_preferred_vco_freq;
2632                 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
2633
2634                 /*
2635                  * Use the lower (vco 8640) cdclk values as a
2636                  * first guess. skl_calc_cdclk() will correct it
2637                  * if the preferred vco is 8100 instead.
2638                  */
2639                 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
2640                         max_cdclk = 617143;
2641                 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
2642                         max_cdclk = 540000;
2643                 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
2644                         max_cdclk = 432000;
2645                 else
2646                         max_cdclk = 308571;
2647
2648                 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
2649         } else if (IS_GEMINILAKE(dev_priv)) {
2650                 dev_priv->max_cdclk_freq = 316800;
2651         } else if (IS_BROXTON(dev_priv)) {
2652                 dev_priv->max_cdclk_freq = 624000;
2653         } else if (IS_BROADWELL(dev_priv))  {
2654                 /*
2655                  * FIXME with extra cooling we can allow
2656                  * 540 MHz for ULX and 675 Mhz for ULT.
2657                  * How can we know if extra cooling is
2658                  * available? PCI ID, VTB, something else?
2659                  */
2660                 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
2661                         dev_priv->max_cdclk_freq = 450000;
2662                 else if (IS_BDW_ULX(dev_priv))
2663                         dev_priv->max_cdclk_freq = 450000;
2664                 else if (IS_BDW_ULT(dev_priv))
2665                         dev_priv->max_cdclk_freq = 540000;
2666                 else
2667                         dev_priv->max_cdclk_freq = 675000;
2668         } else if (IS_CHERRYVIEW(dev_priv)) {
2669                 dev_priv->max_cdclk_freq = 320000;
2670         } else if (IS_VALLEYVIEW(dev_priv)) {
2671                 dev_priv->max_cdclk_freq = 400000;
2672         } else {
2673                 /* otherwise assume cdclk is fixed */
2674                 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk;
2675         }
2676
2677         dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
2678
2679         drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n",
2680                 dev_priv->max_cdclk_freq);
2681
2682         drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n",
2683                 dev_priv->max_dotclk_freq);
2684 }
2685
2686 /**
2687  * intel_update_cdclk - Determine the current CDCLK frequency
2688  * @dev_priv: i915 device
2689  *
2690  * Determine the current CDCLK frequency.
2691  */
2692 void intel_update_cdclk(struct drm_i915_private *dev_priv)
2693 {
2694         dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw);
2695
2696         /*
2697          * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
2698          * Programmng [sic] note: bit[9:2] should be programmed to the number
2699          * of cdclk that generates 4MHz reference clock freq which is used to
2700          * generate GMBus clock. This will vary with the cdclk freq.
2701          */
2702         if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2703                 intel_de_write(dev_priv, GMBUSFREQ_VLV,
2704                                DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000));
2705 }
2706
2707 static int dg1_rawclk(struct drm_i915_private *dev_priv)
2708 {
2709         /*
2710          * DG1 always uses a 38.4 MHz rawclk.  The bspec tells us
2711          * "Program Numerator=2, Denominator=4, Divider=37 decimal."
2712          */
2713         I915_WRITE(PCH_RAWCLK_FREQ,
2714                    CNP_RAWCLK_DEN(4) | CNP_RAWCLK_DIV(37) | ICP_RAWCLK_NUM(2));
2715
2716         return 38400;
2717 }
2718
2719 static int cnp_rawclk(struct drm_i915_private *dev_priv)
2720 {
2721         u32 rawclk;
2722         int divider, fraction;
2723
2724         if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
2725                 /* 24 MHz */
2726                 divider = 24000;
2727                 fraction = 0;
2728         } else {
2729                 /* 19.2 MHz */
2730                 divider = 19000;
2731                 fraction = 200;
2732         }
2733
2734         rawclk = CNP_RAWCLK_DIV(divider / 1000);
2735         if (fraction) {
2736                 int numerator = 1;
2737
2738                 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000,
2739                                                            fraction) - 1);
2740                 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
2741                         rawclk |= ICP_RAWCLK_NUM(numerator);
2742         }
2743
2744         intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk);
2745         return divider + fraction;
2746 }
2747
2748 static int pch_rawclk(struct drm_i915_private *dev_priv)
2749 {
2750         return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
2751 }
2752
2753 static int vlv_hrawclk(struct drm_i915_private *dev_priv)
2754 {
2755         /* RAWCLK_FREQ_VLV register updated from power well code */
2756         return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
2757                                       CCK_DISPLAY_REF_CLOCK_CONTROL);
2758 }
2759
2760 static int i9xx_hrawclk(struct drm_i915_private *dev_priv)
2761 {
2762         u32 clkcfg;
2763
2764         /*
2765          * hrawclock is 1/4 the FSB frequency
2766          *
2767          * Note that this only reads the state of the FSB
2768          * straps, not the actual FSB frequency. Some BIOSen
2769          * let you configure each independently. Ideally we'd
2770          * read out the actual FSB frequency but sadly we
2771          * don't know which registers have that information,
2772          * and all the relevant docs have gone to bit heaven :(
2773          */
2774         clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK;
2775
2776         if (IS_MOBILE(dev_priv)) {
2777                 switch (clkcfg) {
2778                 case CLKCFG_FSB_400:
2779                         return 100000;
2780                 case CLKCFG_FSB_533:
2781                         return 133333;
2782                 case CLKCFG_FSB_667:
2783                         return 166667;
2784                 case CLKCFG_FSB_800:
2785                         return 200000;
2786                 case CLKCFG_FSB_1067:
2787                         return 266667;
2788                 case CLKCFG_FSB_1333:
2789                         return 333333;
2790                 default:
2791                         MISSING_CASE(clkcfg);
2792                         return 133333;
2793                 }
2794         } else {
2795                 switch (clkcfg) {
2796                 case CLKCFG_FSB_400_ALT:
2797                         return 100000;
2798                 case CLKCFG_FSB_533:
2799                         return 133333;
2800                 case CLKCFG_FSB_667:
2801                         return 166667;
2802                 case CLKCFG_FSB_800:
2803                         return 200000;
2804                 case CLKCFG_FSB_1067_ALT:
2805                         return 266667;
2806                 case CLKCFG_FSB_1333_ALT:
2807                         return 333333;
2808                 case CLKCFG_FSB_1600_ALT:
2809                         return 400000;
2810                 default:
2811                         return 133333;
2812                 }
2813         }
2814 }
2815
2816 /**
2817  * intel_read_rawclk - Determine the current RAWCLK frequency
2818  * @dev_priv: i915 device
2819  *
2820  * Determine the current RAWCLK frequency. RAWCLK is a fixed
2821  * frequency clock so this needs to done only once.
2822  */
2823 u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
2824 {
2825         u32 freq;
2826
2827         if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
2828                 freq = dg1_rawclk(dev_priv);
2829         else if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
2830                 freq = cnp_rawclk(dev_priv);
2831         else if (HAS_PCH_SPLIT(dev_priv))
2832                 freq = pch_rawclk(dev_priv);
2833         else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2834                 freq = vlv_hrawclk(dev_priv);
2835         else if (INTEL_GEN(dev_priv) >= 3)
2836                 freq = i9xx_hrawclk(dev_priv);
2837         else
2838                 /* no rawclk on other platforms, or no need to know it */
2839                 return 0;
2840
2841         return freq;
2842 }
2843
2844 /**
2845  * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks
2846  * @dev_priv: i915 device
2847  */
2848 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
2849 {
2850         if (IS_ROCKETLAKE(dev_priv)) {
2851                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2852                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2853                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2854                 dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
2855                 dev_priv->cdclk.table = rkl_cdclk_table;
2856         } else if (INTEL_GEN(dev_priv) >= 12) {
2857                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2858                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2859                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2860                 dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
2861                 dev_priv->cdclk.table = icl_cdclk_table;
2862         } else if (IS_JSL_EHL(dev_priv)) {
2863                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2864                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2865                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2866                 dev_priv->display.calc_voltage_level = ehl_calc_voltage_level;
2867                 dev_priv->cdclk.table = icl_cdclk_table;
2868         } else if (INTEL_GEN(dev_priv) >= 11) {
2869                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2870                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2871                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2872                 dev_priv->display.calc_voltage_level = icl_calc_voltage_level;
2873                 dev_priv->cdclk.table = icl_cdclk_table;
2874         } else if (IS_CANNONLAKE(dev_priv)) {
2875                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2876                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2877                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2878                 dev_priv->display.calc_voltage_level = cnl_calc_voltage_level;
2879                 dev_priv->cdclk.table = cnl_cdclk_table;
2880         } else if (IS_GEN9_LP(dev_priv)) {
2881                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2882                 dev_priv->display.set_cdclk = bxt_set_cdclk;
2883                 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2884                 dev_priv->display.calc_voltage_level = bxt_calc_voltage_level;
2885                 if (IS_GEMINILAKE(dev_priv))
2886                         dev_priv->cdclk.table = glk_cdclk_table;
2887                 else
2888                         dev_priv->cdclk.table = bxt_cdclk_table;
2889         } else if (IS_GEN9_BC(dev_priv)) {
2890                 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2891                 dev_priv->display.set_cdclk = skl_set_cdclk;
2892                 dev_priv->display.modeset_calc_cdclk = skl_modeset_calc_cdclk;
2893         } else if (IS_BROADWELL(dev_priv)) {
2894                 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2895                 dev_priv->display.set_cdclk = bdw_set_cdclk;
2896                 dev_priv->display.modeset_calc_cdclk = bdw_modeset_calc_cdclk;
2897         } else if (IS_CHERRYVIEW(dev_priv)) {
2898                 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2899                 dev_priv->display.set_cdclk = chv_set_cdclk;
2900                 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2901         } else if (IS_VALLEYVIEW(dev_priv)) {
2902                 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2903                 dev_priv->display.set_cdclk = vlv_set_cdclk;
2904                 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2905         } else {
2906                 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2907                 dev_priv->display.modeset_calc_cdclk = fixed_modeset_calc_cdclk;
2908         }
2909
2910         if (INTEL_GEN(dev_priv) >= 10 || IS_GEN9_LP(dev_priv))
2911                 dev_priv->display.get_cdclk = bxt_get_cdclk;
2912         else if (IS_GEN9_BC(dev_priv))
2913                 dev_priv->display.get_cdclk = skl_get_cdclk;
2914         else if (IS_BROADWELL(dev_priv))
2915                 dev_priv->display.get_cdclk = bdw_get_cdclk;
2916         else if (IS_HASWELL(dev_priv))
2917                 dev_priv->display.get_cdclk = hsw_get_cdclk;
2918         else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2919                 dev_priv->display.get_cdclk = vlv_get_cdclk;
2920         else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
2921                 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2922         else if (IS_GEN(dev_priv, 5))
2923                 dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk;
2924         else if (IS_GM45(dev_priv))
2925                 dev_priv->display.get_cdclk = gm45_get_cdclk;
2926         else if (IS_G45(dev_priv))
2927                 dev_priv->display.get_cdclk = g33_get_cdclk;
2928         else if (IS_I965GM(dev_priv))
2929                 dev_priv->display.get_cdclk = i965gm_get_cdclk;
2930         else if (IS_I965G(dev_priv))
2931                 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2932         else if (IS_PINEVIEW(dev_priv))
2933                 dev_priv->display.get_cdclk = pnv_get_cdclk;
2934         else if (IS_G33(dev_priv))
2935                 dev_priv->display.get_cdclk = g33_get_cdclk;
2936         else if (IS_I945GM(dev_priv))
2937                 dev_priv->display.get_cdclk = i945gm_get_cdclk;
2938         else if (IS_I945G(dev_priv))
2939                 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2940         else if (IS_I915GM(dev_priv))
2941                 dev_priv->display.get_cdclk = i915gm_get_cdclk;
2942         else if (IS_I915G(dev_priv))
2943                 dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk;
2944         else if (IS_I865G(dev_priv))
2945                 dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk;
2946         else if (IS_I85X(dev_priv))
2947                 dev_priv->display.get_cdclk = i85x_get_cdclk;
2948         else if (IS_I845G(dev_priv))
2949                 dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk;
2950         else if (IS_I830(dev_priv))
2951                 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2952
2953         if (drm_WARN(&dev_priv->drm, !dev_priv->display.get_cdclk,
2954                      "Unknown platform. Assuming 133 MHz CDCLK\n"))
2955                 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2956 }