perf probe: Fix memory leak when synthesizing SDT probes
[linux-2.6-microblaze.git] / drivers / gpio / gpio-reg.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * gpio-reg: single register individually fixed-direction GPIOs
4  *
5  * Copyright (C) 2016 Russell King
6  */
7 #include <linux/gpio/driver.h>
8 #include <linux/gpio/gpio-reg.h>
9 #include <linux/io.h>
10 #include <linux/slab.h>
11 #include <linux/spinlock.h>
12
13 struct gpio_reg {
14         struct gpio_chip gc;
15         spinlock_t lock;
16         u32 direction;
17         u32 out;
18         void __iomem *reg;
19         struct irq_domain *irqdomain;
20         const int *irqs;
21 };
22
23 #define to_gpio_reg(x) container_of(x, struct gpio_reg, gc)
24
25 static int gpio_reg_get_direction(struct gpio_chip *gc, unsigned offset)
26 {
27         struct gpio_reg *r = to_gpio_reg(gc);
28
29         return r->direction & BIT(offset) ? GPIO_LINE_DIRECTION_IN :
30                                             GPIO_LINE_DIRECTION_OUT;
31 }
32
33 static int gpio_reg_direction_output(struct gpio_chip *gc, unsigned offset,
34         int value)
35 {
36         struct gpio_reg *r = to_gpio_reg(gc);
37
38         if (r->direction & BIT(offset))
39                 return -ENOTSUPP;
40
41         gc->set(gc, offset, value);
42         return 0;
43 }
44
45 static int gpio_reg_direction_input(struct gpio_chip *gc, unsigned offset)
46 {
47         struct gpio_reg *r = to_gpio_reg(gc);
48
49         return r->direction & BIT(offset) ? 0 : -ENOTSUPP;
50 }
51
52 static void gpio_reg_set(struct gpio_chip *gc, unsigned offset, int value)
53 {
54         struct gpio_reg *r = to_gpio_reg(gc);
55         unsigned long flags;
56         u32 val, mask = BIT(offset);
57
58         spin_lock_irqsave(&r->lock, flags);
59         val = r->out;
60         if (value)
61                 val |= mask;
62         else
63                 val &= ~mask;
64         r->out = val;
65         writel_relaxed(val, r->reg);
66         spin_unlock_irqrestore(&r->lock, flags);
67 }
68
69 static int gpio_reg_get(struct gpio_chip *gc, unsigned offset)
70 {
71         struct gpio_reg *r = to_gpio_reg(gc);
72         u32 val, mask = BIT(offset);
73
74         if (r->direction & mask) {
75                 /*
76                  * double-read the value, some registers latch after the
77                  * first read.
78                  */
79                 readl_relaxed(r->reg);
80                 val = readl_relaxed(r->reg);
81         } else {
82                 val = r->out;
83         }
84         return !!(val & mask);
85 }
86
87 static void gpio_reg_set_multiple(struct gpio_chip *gc, unsigned long *mask,
88         unsigned long *bits)
89 {
90         struct gpio_reg *r = to_gpio_reg(gc);
91         unsigned long flags;
92
93         spin_lock_irqsave(&r->lock, flags);
94         r->out = (r->out & ~*mask) | (*bits & *mask);
95         writel_relaxed(r->out, r->reg);
96         spin_unlock_irqrestore(&r->lock, flags);
97 }
98
99 static int gpio_reg_to_irq(struct gpio_chip *gc, unsigned offset)
100 {
101         struct gpio_reg *r = to_gpio_reg(gc);
102         int irq = r->irqs[offset];
103
104         if (irq >= 0 && r->irqdomain)
105                 irq = irq_find_mapping(r->irqdomain, irq);
106
107         return irq;
108 }
109
110 /**
111  * gpio_reg_init - add a fixed in/out register as gpio
112  * @dev: optional struct device associated with this register
113  * @base: start gpio number, or -1 to allocate
114  * @num: number of GPIOs, maximum 32
115  * @label: GPIO chip label
116  * @direction: bitmask of fixed direction, one per GPIO signal, 1 = in
117  * @def_out: initial GPIO output value
118  * @names: array of %num strings describing each GPIO signal or %NULL
119  * @irqdom: irq domain or %NULL
120  * @irqs: array of %num ints describing the interrupt mapping for each
121  *        GPIO signal, or %NULL.  If @irqdom is %NULL, then this
122  *        describes the Linux interrupt number, otherwise it describes
123  *        the hardware interrupt number in the specified irq domain.
124  *
125  * Add a single-register GPIO device containing up to 32 GPIO signals,
126  * where each GPIO has a fixed input or output configuration.  Only
127  * input GPIOs are assumed to be readable from the register, and only
128  * then after a double-read.  Output values are assumed not to be
129  * readable.
130  */
131 struct gpio_chip *gpio_reg_init(struct device *dev, void __iomem *reg,
132         int base, int num, const char *label, u32 direction, u32 def_out,
133         const char *const *names, struct irq_domain *irqdom, const int *irqs)
134 {
135         struct gpio_reg *r;
136         int ret;
137
138         if (dev)
139                 r = devm_kzalloc(dev, sizeof(*r), GFP_KERNEL);
140         else
141                 r = kzalloc(sizeof(*r), GFP_KERNEL);
142
143         if (!r)
144                 return ERR_PTR(-ENOMEM);
145
146         spin_lock_init(&r->lock);
147
148         r->gc.label = label;
149         r->gc.get_direction = gpio_reg_get_direction;
150         r->gc.direction_input = gpio_reg_direction_input;
151         r->gc.direction_output = gpio_reg_direction_output;
152         r->gc.set = gpio_reg_set;
153         r->gc.get = gpio_reg_get;
154         r->gc.set_multiple = gpio_reg_set_multiple;
155         if (irqs)
156                 r->gc.to_irq = gpio_reg_to_irq;
157         r->gc.base = base;
158         r->gc.ngpio = num;
159         r->gc.names = names;
160         r->direction = direction;
161         r->out = def_out;
162         r->reg = reg;
163         r->irqs = irqs;
164
165         if (dev)
166                 ret = devm_gpiochip_add_data(dev, &r->gc, r);
167         else
168                 ret = gpiochip_add_data(&r->gc, r);
169
170         return ret ? ERR_PTR(ret) : &r->gc;
171 }
172
173 int gpio_reg_resume(struct gpio_chip *gc)
174 {
175         struct gpio_reg *r = to_gpio_reg(gc);
176         unsigned long flags;
177
178         spin_lock_irqsave(&r->lock, flags);
179         writel_relaxed(r->out, r->reg);
180         spin_unlock_irqrestore(&r->lock, flags);
181
182         return 0;
183 }