Merge drm/drm-next into drm-misc-next
[linux-2.6-microblaze.git] / drivers / gnss / ubx.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * u-blox GNSS receiver driver
4  *
5  * Copyright (C) 2018 Johan Hovold <johan@kernel.org>
6  */
7
8 #include <linux/errno.h>
9 #include <linux/gnss.h>
10 #include <linux/init.h>
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/of.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/serdev.h>
16
17 #include "serial.h"
18
19 struct ubx_data {
20         struct regulator *v_bckp;
21         struct regulator *vcc;
22 };
23
24 static int ubx_set_active(struct gnss_serial *gserial)
25 {
26         struct ubx_data *data = gnss_serial_get_drvdata(gserial);
27         int ret;
28
29         ret = regulator_enable(data->vcc);
30         if (ret)
31                 return ret;
32
33         return 0;
34 }
35
36 static int ubx_set_standby(struct gnss_serial *gserial)
37 {
38         struct ubx_data *data = gnss_serial_get_drvdata(gserial);
39         int ret;
40
41         ret = regulator_disable(data->vcc);
42         if (ret)
43                 return ret;
44
45         return 0;
46 }
47
48 static int ubx_set_power(struct gnss_serial *gserial,
49                                 enum gnss_serial_pm_state state)
50 {
51         switch (state) {
52         case GNSS_SERIAL_ACTIVE:
53                 return ubx_set_active(gserial);
54         case GNSS_SERIAL_OFF:
55         case GNSS_SERIAL_STANDBY:
56                 return ubx_set_standby(gserial);
57         }
58
59         return -EINVAL;
60 }
61
62 static const struct gnss_serial_ops ubx_gserial_ops = {
63         .set_power = ubx_set_power,
64 };
65
66 static int ubx_probe(struct serdev_device *serdev)
67 {
68         struct gnss_serial *gserial;
69         struct ubx_data *data;
70         int ret;
71
72         gserial = gnss_serial_allocate(serdev, sizeof(*data));
73         if (IS_ERR(gserial)) {
74                 ret = PTR_ERR(gserial);
75                 return ret;
76         }
77
78         gserial->ops = &ubx_gserial_ops;
79
80         gserial->gdev->type = GNSS_TYPE_UBX;
81
82         data = gnss_serial_get_drvdata(gserial);
83
84         data->vcc = devm_regulator_get(&serdev->dev, "vcc");
85         if (IS_ERR(data->vcc)) {
86                 ret = PTR_ERR(data->vcc);
87                 goto err_free_gserial;
88         }
89
90         data->v_bckp = devm_regulator_get_optional(&serdev->dev, "v-bckp");
91         if (IS_ERR(data->v_bckp)) {
92                 ret = PTR_ERR(data->v_bckp);
93                 if (ret == -ENODEV)
94                         data->v_bckp = NULL;
95                 else
96                         goto err_free_gserial;
97         }
98
99         if (data->v_bckp) {
100                 ret = regulator_enable(data->v_bckp);
101                 if (ret)
102                         goto err_free_gserial;
103         }
104
105         ret = gnss_serial_register(gserial);
106         if (ret)
107                 goto err_disable_v_bckp;
108
109         return 0;
110
111 err_disable_v_bckp:
112         if (data->v_bckp)
113                 regulator_disable(data->v_bckp);
114 err_free_gserial:
115         gnss_serial_free(gserial);
116
117         return ret;
118 }
119
120 static void ubx_remove(struct serdev_device *serdev)
121 {
122         struct gnss_serial *gserial = serdev_device_get_drvdata(serdev);
123         struct ubx_data *data = gnss_serial_get_drvdata(gserial);
124
125         gnss_serial_deregister(gserial);
126         if (data->v_bckp)
127                 regulator_disable(data->v_bckp);
128         gnss_serial_free(gserial);
129 };
130
131 #ifdef CONFIG_OF
132 static const struct of_device_id ubx_of_match[] = {
133         { .compatible = "u-blox,neo-6m" },
134         { .compatible = "u-blox,neo-8" },
135         { .compatible = "u-blox,neo-m8" },
136         {},
137 };
138 MODULE_DEVICE_TABLE(of, ubx_of_match);
139 #endif
140
141 static struct serdev_device_driver ubx_driver = {
142         .driver = {
143                 .name           = "gnss-ubx",
144                 .of_match_table = of_match_ptr(ubx_of_match),
145                 .pm             = &gnss_serial_pm_ops,
146         },
147         .probe  = ubx_probe,
148         .remove = ubx_remove,
149 };
150 module_serdev_device_driver(ubx_driver);
151
152 MODULE_AUTHOR("Johan Hovold <johan@kernel.org>");
153 MODULE_DESCRIPTION("u-blox GNSS receiver driver");
154 MODULE_LICENSE("GPL v2");