Merge v5.14-rc3 into usb-next
[linux-2.6-microblaze.git] / drivers / firmware / arm_scmi / sensors.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * System Control and Management Interface (SCMI) Sensor Protocol
4  *
5  * Copyright (C) 2018-2021 ARM Ltd.
6  */
7
8 #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt
9
10 #include <linux/bitfield.h>
11 #include <linux/module.h>
12 #include <linux/scmi_protocol.h>
13
14 #include "common.h"
15 #include "notify.h"
16
17 #define SCMI_MAX_NUM_SENSOR_AXIS        63
18 #define SCMIv2_SENSOR_PROTOCOL          0x10000
19
20 enum scmi_sensor_protocol_cmd {
21         SENSOR_DESCRIPTION_GET = 0x3,
22         SENSOR_TRIP_POINT_NOTIFY = 0x4,
23         SENSOR_TRIP_POINT_CONFIG = 0x5,
24         SENSOR_READING_GET = 0x6,
25         SENSOR_AXIS_DESCRIPTION_GET = 0x7,
26         SENSOR_LIST_UPDATE_INTERVALS = 0x8,
27         SENSOR_CONFIG_GET = 0x9,
28         SENSOR_CONFIG_SET = 0xA,
29         SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB,
30 };
31
32 struct scmi_msg_resp_sensor_attributes {
33         __le16 num_sensors;
34         u8 max_requests;
35         u8 reserved;
36         __le32 reg_addr_low;
37         __le32 reg_addr_high;
38         __le32 reg_size;
39 };
40
41 /* v3 attributes_low macros */
42 #define SUPPORTS_UPDATE_NOTIFY(x)       FIELD_GET(BIT(30), (x))
43 #define SENSOR_TSTAMP_EXP(x)            FIELD_GET(GENMASK(14, 10), (x))
44 #define SUPPORTS_TIMESTAMP(x)           FIELD_GET(BIT(9), (x))
45 #define SUPPORTS_EXTEND_ATTRS(x)        FIELD_GET(BIT(8), (x))
46
47 /* v2 attributes_high macros */
48 #define SENSOR_UPDATE_BASE(x)           FIELD_GET(GENMASK(31, 27), (x))
49 #define SENSOR_UPDATE_SCALE(x)          FIELD_GET(GENMASK(26, 22), (x))
50
51 /* v3 attributes_high macros */
52 #define SENSOR_AXIS_NUMBER(x)           FIELD_GET(GENMASK(21, 16), (x))
53 #define SUPPORTS_AXIS(x)                FIELD_GET(BIT(8), (x))
54
55 /* v3 resolution macros */
56 #define SENSOR_RES(x)                   FIELD_GET(GENMASK(26, 0), (x))
57 #define SENSOR_RES_EXP(x)               FIELD_GET(GENMASK(31, 27), (x))
58
59 struct scmi_msg_resp_attrs {
60         __le32 min_range_low;
61         __le32 min_range_high;
62         __le32 max_range_low;
63         __le32 max_range_high;
64 };
65
66 struct scmi_msg_resp_sensor_description {
67         __le16 num_returned;
68         __le16 num_remaining;
69         struct scmi_sensor_descriptor {
70                 __le32 id;
71                 __le32 attributes_low;
72 /* Common attributes_low macros */
73 #define SUPPORTS_ASYNC_READ(x)          FIELD_GET(BIT(31), (x))
74 #define NUM_TRIP_POINTS(x)              FIELD_GET(GENMASK(7, 0), (x))
75                 __le32 attributes_high;
76 /* Common attributes_high macros */
77 #define SENSOR_SCALE(x)                 FIELD_GET(GENMASK(15, 11), (x))
78 #define SENSOR_SCALE_SIGN               BIT(4)
79 #define SENSOR_SCALE_EXTEND             GENMASK(31, 5)
80 #define SENSOR_TYPE(x)                  FIELD_GET(GENMASK(7, 0), (x))
81                 u8 name[SCMI_MAX_STR_SIZE];
82                 /* only for version > 2.0 */
83                 __le32 power;
84                 __le32 resolution;
85                 struct scmi_msg_resp_attrs scalar_attrs;
86         } desc[];
87 };
88
89 /* Base scmi_sensor_descriptor size excluding extended attrs after name */
90 #define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ        28
91
92 /* Sign extend to a full s32 */
93 #define S32_EXT(v)                                                      \
94         ({                                                              \
95                 int __v = (v);                                          \
96                                                                         \
97                 if (__v & SENSOR_SCALE_SIGN)                            \
98                         __v |= SENSOR_SCALE_EXTEND;                     \
99                 __v;                                                    \
100         })
101
102 struct scmi_msg_sensor_axis_description_get {
103         __le32 id;
104         __le32 axis_desc_index;
105 };
106
107 struct scmi_msg_resp_sensor_axis_description {
108         __le32 num_axis_flags;
109 #define NUM_AXIS_RETURNED(x)            FIELD_GET(GENMASK(5, 0), (x))
110 #define NUM_AXIS_REMAINING(x)           FIELD_GET(GENMASK(31, 26), (x))
111         struct scmi_axis_descriptor {
112                 __le32 id;
113                 __le32 attributes_low;
114                 __le32 attributes_high;
115                 u8 name[SCMI_MAX_STR_SIZE];
116                 __le32 resolution;
117                 struct scmi_msg_resp_attrs attrs;
118         } desc[];
119 };
120
121 /* Base scmi_axis_descriptor size excluding extended attrs after name */
122 #define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ        28
123
124 struct scmi_msg_sensor_list_update_intervals {
125         __le32 id;
126         __le32 index;
127 };
128
129 struct scmi_msg_resp_sensor_list_update_intervals {
130         __le32 num_intervals_flags;
131 #define NUM_INTERVALS_RETURNED(x)       FIELD_GET(GENMASK(11, 0), (x))
132 #define SEGMENTED_INTVL_FORMAT(x)       FIELD_GET(BIT(12), (x))
133 #define NUM_INTERVALS_REMAINING(x)      FIELD_GET(GENMASK(31, 16), (x))
134         __le32 intervals[];
135 };
136
137 struct scmi_msg_sensor_request_notify {
138         __le32 id;
139         __le32 event_control;
140 #define SENSOR_NOTIFY_ALL       BIT(0)
141 };
142
143 struct scmi_msg_set_sensor_trip_point {
144         __le32 id;
145         __le32 event_control;
146 #define SENSOR_TP_EVENT_MASK    (0x3)
147 #define SENSOR_TP_DISABLED      0x0
148 #define SENSOR_TP_POSITIVE      0x1
149 #define SENSOR_TP_NEGATIVE      0x2
150 #define SENSOR_TP_BOTH          0x3
151 #define SENSOR_TP_ID(x)         (((x) & 0xff) << 4)
152         __le32 value_low;
153         __le32 value_high;
154 };
155
156 struct scmi_msg_sensor_config_set {
157         __le32 id;
158         __le32 sensor_config;
159 };
160
161 struct scmi_msg_sensor_reading_get {
162         __le32 id;
163         __le32 flags;
164 #define SENSOR_READ_ASYNC       BIT(0)
165 };
166
167 struct scmi_resp_sensor_reading_complete {
168         __le32 id;
169         __le32 readings_low;
170         __le32 readings_high;
171 };
172
173 struct scmi_sensor_reading_resp {
174         __le32 sensor_value_low;
175         __le32 sensor_value_high;
176         __le32 timestamp_low;
177         __le32 timestamp_high;
178 };
179
180 struct scmi_resp_sensor_reading_complete_v3 {
181         __le32 id;
182         struct scmi_sensor_reading_resp readings[];
183 };
184
185 struct scmi_sensor_trip_notify_payld {
186         __le32 agent_id;
187         __le32 sensor_id;
188         __le32 trip_point_desc;
189 };
190
191 struct scmi_sensor_update_notify_payld {
192         __le32 agent_id;
193         __le32 sensor_id;
194         struct scmi_sensor_reading_resp readings[];
195 };
196
197 struct sensors_info {
198         u32 version;
199         int num_sensors;
200         int max_requests;
201         u64 reg_addr;
202         u32 reg_size;
203         struct scmi_sensor_info *sensors;
204 };
205
206 static int scmi_sensor_attributes_get(const struct scmi_protocol_handle *ph,
207                                       struct sensors_info *si)
208 {
209         int ret;
210         struct scmi_xfer *t;
211         struct scmi_msg_resp_sensor_attributes *attr;
212
213         ret = ph->xops->xfer_get_init(ph, PROTOCOL_ATTRIBUTES,
214                                       0, sizeof(*attr), &t);
215         if (ret)
216                 return ret;
217
218         attr = t->rx.buf;
219
220         ret = ph->xops->do_xfer(ph, t);
221         if (!ret) {
222                 si->num_sensors = le16_to_cpu(attr->num_sensors);
223                 si->max_requests = attr->max_requests;
224                 si->reg_addr = le32_to_cpu(attr->reg_addr_low) |
225                                 (u64)le32_to_cpu(attr->reg_addr_high) << 32;
226                 si->reg_size = le32_to_cpu(attr->reg_size);
227         }
228
229         ph->xops->xfer_put(ph, t);
230         return ret;
231 }
232
233 static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out,
234                                           struct scmi_msg_resp_attrs *in)
235 {
236         out->min_range = get_unaligned_le64((void *)&in->min_range_low);
237         out->max_range = get_unaligned_le64((void *)&in->max_range_low);
238 }
239
240 static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
241                                         struct scmi_sensor_info *s)
242 {
243         int ret, cnt;
244         u32 desc_index = 0;
245         u16 num_returned, num_remaining;
246         struct scmi_xfer *ti;
247         struct scmi_msg_resp_sensor_list_update_intervals *buf;
248         struct scmi_msg_sensor_list_update_intervals *msg;
249
250         ret = ph->xops->xfer_get_init(ph, SENSOR_LIST_UPDATE_INTERVALS,
251                                       sizeof(*msg), 0, &ti);
252         if (ret)
253                 return ret;
254
255         buf = ti->rx.buf;
256         do {
257                 u32 flags;
258
259                 msg = ti->tx.buf;
260                 /* Set the number of sensors to be skipped/already read */
261                 msg->id = cpu_to_le32(s->id);
262                 msg->index = cpu_to_le32(desc_index);
263
264                 ret = ph->xops->do_xfer(ph, ti);
265                 if (ret)
266                         break;
267
268                 flags = le32_to_cpu(buf->num_intervals_flags);
269                 num_returned = NUM_INTERVALS_RETURNED(flags);
270                 num_remaining = NUM_INTERVALS_REMAINING(flags);
271
272                 /*
273                  * Max intervals is not declared previously anywhere so we
274                  * assume it's returned+remaining.
275                  */
276                 if (!s->intervals.count) {
277                         s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags);
278                         s->intervals.count = num_returned + num_remaining;
279                         /* segmented intervals are reported in one triplet */
280                         if (s->intervals.segmented &&
281                             (num_remaining || num_returned != 3)) {
282                                 dev_err(ph->dev,
283                                         "Sensor ID:%d advertises an invalid segmented interval (%d)\n",
284                                         s->id, s->intervals.count);
285                                 s->intervals.segmented = false;
286                                 s->intervals.count = 0;
287                                 ret = -EINVAL;
288                                 break;
289                         }
290                         /* Direct allocation when exceeding pre-allocated */
291                         if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) {
292                                 s->intervals.desc =
293                                         devm_kcalloc(ph->dev,
294                                                      s->intervals.count,
295                                                      sizeof(*s->intervals.desc),
296                                                      GFP_KERNEL);
297                                 if (!s->intervals.desc) {
298                                         s->intervals.segmented = false;
299                                         s->intervals.count = 0;
300                                         ret = -ENOMEM;
301                                         break;
302                                 }
303                         }
304                 } else if (desc_index + num_returned > s->intervals.count) {
305                         dev_err(ph->dev,
306                                 "No. of update intervals can't exceed %d\n",
307                                 s->intervals.count);
308                         ret = -EINVAL;
309                         break;
310                 }
311
312                 for (cnt = 0; cnt < num_returned; cnt++)
313                         s->intervals.desc[desc_index + cnt] =
314                                         le32_to_cpu(buf->intervals[cnt]);
315
316                 desc_index += num_returned;
317
318                 ph->xops->reset_rx_to_maxsz(ph, ti);
319                 /*
320                  * check for both returned and remaining to avoid infinite
321                  * loop due to buggy firmware
322                  */
323         } while (num_returned && num_remaining);
324
325         ph->xops->xfer_put(ph, ti);
326         return ret;
327 }
328
329 static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
330                                         struct scmi_sensor_info *s)
331 {
332         int ret, cnt;
333         u32 desc_index = 0;
334         u16 num_returned, num_remaining;
335         struct scmi_xfer *te;
336         struct scmi_msg_resp_sensor_axis_description *buf;
337         struct scmi_msg_sensor_axis_description_get *msg;
338
339         s->axis = devm_kcalloc(ph->dev, s->num_axis,
340                                sizeof(*s->axis), GFP_KERNEL);
341         if (!s->axis)
342                 return -ENOMEM;
343
344         ret = ph->xops->xfer_get_init(ph, SENSOR_AXIS_DESCRIPTION_GET,
345                                       sizeof(*msg), 0, &te);
346         if (ret)
347                 return ret;
348
349         buf = te->rx.buf;
350         do {
351                 u32 flags;
352                 struct scmi_axis_descriptor *adesc;
353
354                 msg = te->tx.buf;
355                 /* Set the number of sensors to be skipped/already read */
356                 msg->id = cpu_to_le32(s->id);
357                 msg->axis_desc_index = cpu_to_le32(desc_index);
358
359                 ret = ph->xops->do_xfer(ph, te);
360                 if (ret)
361                         break;
362
363                 flags = le32_to_cpu(buf->num_axis_flags);
364                 num_returned = NUM_AXIS_RETURNED(flags);
365                 num_remaining = NUM_AXIS_REMAINING(flags);
366
367                 if (desc_index + num_returned > s->num_axis) {
368                         dev_err(ph->dev, "No. of axis can't exceed %d\n",
369                                 s->num_axis);
370                         break;
371                 }
372
373                 adesc = &buf->desc[0];
374                 for (cnt = 0; cnt < num_returned; cnt++) {
375                         u32 attrh, attrl;
376                         struct scmi_sensor_axis_info *a;
377                         size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
378
379                         attrl = le32_to_cpu(adesc->attributes_low);
380
381                         a = &s->axis[desc_index + cnt];
382
383                         a->id = le32_to_cpu(adesc->id);
384                         a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);
385
386                         attrh = le32_to_cpu(adesc->attributes_high);
387                         a->scale = S32_EXT(SENSOR_SCALE(attrh));
388                         a->type = SENSOR_TYPE(attrh);
389                         strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
390
391                         if (a->extended_attrs) {
392                                 unsigned int ares =
393                                         le32_to_cpu(adesc->resolution);
394
395                                 a->resolution = SENSOR_RES(ares);
396                                 a->exponent =
397                                         S32_EXT(SENSOR_RES_EXP(ares));
398                                 dsize += sizeof(adesc->resolution);
399
400                                 scmi_parse_range_attrs(&a->attrs,
401                                                        &adesc->attrs);
402                                 dsize += sizeof(adesc->attrs);
403                         }
404
405                         adesc = (typeof(adesc))((u8 *)adesc + dsize);
406                 }
407
408                 desc_index += num_returned;
409
410                 ph->xops->reset_rx_to_maxsz(ph, te);
411                 /*
412                  * check for both returned and remaining to avoid infinite
413                  * loop due to buggy firmware
414                  */
415         } while (num_returned && num_remaining);
416
417         ph->xops->xfer_put(ph, te);
418         return ret;
419 }
420
421 static int scmi_sensor_description_get(const struct scmi_protocol_handle *ph,
422                                        struct sensors_info *si)
423 {
424         int ret, cnt;
425         u32 desc_index = 0;
426         u16 num_returned, num_remaining;
427         struct scmi_xfer *t;
428         struct scmi_msg_resp_sensor_description *buf;
429
430         ret = ph->xops->xfer_get_init(ph, SENSOR_DESCRIPTION_GET,
431                                       sizeof(__le32), 0, &t);
432         if (ret)
433                 return ret;
434
435         buf = t->rx.buf;
436
437         do {
438                 struct scmi_sensor_descriptor *sdesc;
439
440                 /* Set the number of sensors to be skipped/already read */
441                 put_unaligned_le32(desc_index, t->tx.buf);
442
443                 ret = ph->xops->do_xfer(ph, t);
444                 if (ret)
445                         break;
446
447                 num_returned = le16_to_cpu(buf->num_returned);
448                 num_remaining = le16_to_cpu(buf->num_remaining);
449
450                 if (desc_index + num_returned > si->num_sensors) {
451                         dev_err(ph->dev, "No. of sensors can't exceed %d",
452                                 si->num_sensors);
453                         break;
454                 }
455
456                 sdesc = &buf->desc[0];
457                 for (cnt = 0; cnt < num_returned; cnt++) {
458                         u32 attrh, attrl;
459                         struct scmi_sensor_info *s;
460                         size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ;
461
462                         s = &si->sensors[desc_index + cnt];
463                         s->id = le32_to_cpu(sdesc->id);
464
465                         attrl = le32_to_cpu(sdesc->attributes_low);
466                         /* common bitfields parsing */
467                         s->async = SUPPORTS_ASYNC_READ(attrl);
468                         s->num_trip_points = NUM_TRIP_POINTS(attrl);
469                         /**
470                          * only SCMIv3.0 specific bitfield below.
471                          * Such bitfields are assumed to be zeroed on non
472                          * relevant fw versions...assuming fw not buggy !
473                          */
474                         s->update = SUPPORTS_UPDATE_NOTIFY(attrl);
475                         s->timestamped = SUPPORTS_TIMESTAMP(attrl);
476                         if (s->timestamped)
477                                 s->tstamp_scale =
478                                         S32_EXT(SENSOR_TSTAMP_EXP(attrl));
479                         s->extended_scalar_attrs =
480                                 SUPPORTS_EXTEND_ATTRS(attrl);
481
482                         attrh = le32_to_cpu(sdesc->attributes_high);
483                         /* common bitfields parsing */
484                         s->scale = S32_EXT(SENSOR_SCALE(attrh));
485                         s->type = SENSOR_TYPE(attrh);
486                         /* Use pre-allocated pool wherever possible */
487                         s->intervals.desc = s->intervals.prealloc_pool;
488                         if (si->version == SCMIv2_SENSOR_PROTOCOL) {
489                                 s->intervals.segmented = false;
490                                 s->intervals.count = 1;
491                                 /*
492                                  * Convert SCMIv2.0 update interval format to
493                                  * SCMIv3.0 to be used as the common exposed
494                                  * descriptor, accessible via common macros.
495                                  */
496                                 s->intervals.desc[0] =
497                                         (SENSOR_UPDATE_BASE(attrh) << 5) |
498                                          SENSOR_UPDATE_SCALE(attrh);
499                         } else {
500                                 /*
501                                  * From SCMIv3.0 update intervals are retrieved
502                                  * via a dedicated (optional) command.
503                                  * Since the command is optional, on error carry
504                                  * on without any update interval.
505                                  */
506                                 if (scmi_sensor_update_intervals(ph, s))
507                                         dev_dbg(ph->dev,
508                                                 "Update Intervals not available for sensor ID:%d\n",
509                                                 s->id);
510                         }
511                         /**
512                          * only > SCMIv2.0 specific bitfield below.
513                          * Such bitfields are assumed to be zeroed on non
514                          * relevant fw versions...assuming fw not buggy !
515                          */
516                         s->num_axis = min_t(unsigned int,
517                                             SUPPORTS_AXIS(attrh) ?
518                                             SENSOR_AXIS_NUMBER(attrh) : 0,
519                                             SCMI_MAX_NUM_SENSOR_AXIS);
520                         strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
521
522                         if (s->extended_scalar_attrs) {
523                                 s->sensor_power = le32_to_cpu(sdesc->power);
524                                 dsize += sizeof(sdesc->power);
525                                 /* Only for sensors reporting scalar values */
526                                 if (s->num_axis == 0) {
527                                         unsigned int sres =
528                                                 le32_to_cpu(sdesc->resolution);
529
530                                         s->resolution = SENSOR_RES(sres);
531                                         s->exponent =
532                                                 S32_EXT(SENSOR_RES_EXP(sres));
533                                         dsize += sizeof(sdesc->resolution);
534
535                                         scmi_parse_range_attrs(&s->scalar_attrs,
536                                                                &sdesc->scalar_attrs);
537                                         dsize += sizeof(sdesc->scalar_attrs);
538                                 }
539                         }
540                         if (s->num_axis > 0) {
541                                 ret = scmi_sensor_axis_description(ph, s);
542                                 if (ret)
543                                         goto out;
544                         }
545
546                         sdesc = (typeof(sdesc))((u8 *)sdesc + dsize);
547                 }
548
549                 desc_index += num_returned;
550
551                 ph->xops->reset_rx_to_maxsz(ph, t);
552                 /*
553                  * check for both returned and remaining to avoid infinite
554                  * loop due to buggy firmware
555                  */
556         } while (num_returned && num_remaining);
557
558 out:
559         ph->xops->xfer_put(ph, t);
560         return ret;
561 }
562
563 static inline int
564 scmi_sensor_request_notify(const struct scmi_protocol_handle *ph, u32 sensor_id,
565                            u8 message_id, bool enable)
566 {
567         int ret;
568         u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0;
569         struct scmi_xfer *t;
570         struct scmi_msg_sensor_request_notify *cfg;
571
572         ret = ph->xops->xfer_get_init(ph, message_id, sizeof(*cfg), 0, &t);
573         if (ret)
574                 return ret;
575
576         cfg = t->tx.buf;
577         cfg->id = cpu_to_le32(sensor_id);
578         cfg->event_control = cpu_to_le32(evt_cntl);
579
580         ret = ph->xops->do_xfer(ph, t);
581
582         ph->xops->xfer_put(ph, t);
583         return ret;
584 }
585
586 static int scmi_sensor_trip_point_notify(const struct scmi_protocol_handle *ph,
587                                          u32 sensor_id, bool enable)
588 {
589         return scmi_sensor_request_notify(ph, sensor_id,
590                                           SENSOR_TRIP_POINT_NOTIFY,
591                                           enable);
592 }
593
594 static int
595 scmi_sensor_continuous_update_notify(const struct scmi_protocol_handle *ph,
596                                      u32 sensor_id, bool enable)
597 {
598         return scmi_sensor_request_notify(ph, sensor_id,
599                                           SENSOR_CONTINUOUS_UPDATE_NOTIFY,
600                                           enable);
601 }
602
603 static int
604 scmi_sensor_trip_point_config(const struct scmi_protocol_handle *ph,
605                               u32 sensor_id, u8 trip_id, u64 trip_value)
606 {
607         int ret;
608         u32 evt_cntl = SENSOR_TP_BOTH;
609         struct scmi_xfer *t;
610         struct scmi_msg_set_sensor_trip_point *trip;
611
612         ret = ph->xops->xfer_get_init(ph, SENSOR_TRIP_POINT_CONFIG,
613                                       sizeof(*trip), 0, &t);
614         if (ret)
615                 return ret;
616
617         trip = t->tx.buf;
618         trip->id = cpu_to_le32(sensor_id);
619         trip->event_control = cpu_to_le32(evt_cntl | SENSOR_TP_ID(trip_id));
620         trip->value_low = cpu_to_le32(trip_value & 0xffffffff);
621         trip->value_high = cpu_to_le32(trip_value >> 32);
622
623         ret = ph->xops->do_xfer(ph, t);
624
625         ph->xops->xfer_put(ph, t);
626         return ret;
627 }
628
629 static int scmi_sensor_config_get(const struct scmi_protocol_handle *ph,
630                                   u32 sensor_id, u32 *sensor_config)
631 {
632         int ret;
633         struct scmi_xfer *t;
634
635         ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_GET,
636                                       sizeof(__le32), sizeof(__le32), &t);
637         if (ret)
638                 return ret;
639
640         put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf);
641         ret = ph->xops->do_xfer(ph, t);
642         if (!ret) {
643                 struct sensors_info *si = ph->get_priv(ph);
644                 struct scmi_sensor_info *s = si->sensors + sensor_id;
645
646                 *sensor_config = get_unaligned_le64(t->rx.buf);
647                 s->sensor_config = *sensor_config;
648         }
649
650         ph->xops->xfer_put(ph, t);
651         return ret;
652 }
653
654 static int scmi_sensor_config_set(const struct scmi_protocol_handle *ph,
655                                   u32 sensor_id, u32 sensor_config)
656 {
657         int ret;
658         struct scmi_xfer *t;
659         struct scmi_msg_sensor_config_set *msg;
660
661         ret = ph->xops->xfer_get_init(ph, SENSOR_CONFIG_SET,
662                                       sizeof(*msg), 0, &t);
663         if (ret)
664                 return ret;
665
666         msg = t->tx.buf;
667         msg->id = cpu_to_le32(sensor_id);
668         msg->sensor_config = cpu_to_le32(sensor_config);
669
670         ret = ph->xops->do_xfer(ph, t);
671         if (!ret) {
672                 struct sensors_info *si = ph->get_priv(ph);
673                 struct scmi_sensor_info *s = si->sensors + sensor_id;
674
675                 s->sensor_config = sensor_config;
676         }
677
678         ph->xops->xfer_put(ph, t);
679         return ret;
680 }
681
682 /**
683  * scmi_sensor_reading_get  - Read scalar sensor value
684  * @ph: Protocol handle
685  * @sensor_id: Sensor ID
686  * @value: The 64bit value sensor reading
687  *
688  * This function returns a single 64 bit reading value representing the sensor
689  * value; if the platform SCMI Protocol implementation and the sensor support
690  * multiple axis and timestamped-reads, this just returns the first axis while
691  * dropping the timestamp value.
692  * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of
693  * timestamped multi-axis values.
694  *
695  * Return: 0 on Success
696  */
697 static int scmi_sensor_reading_get(const struct scmi_protocol_handle *ph,
698                                    u32 sensor_id, u64 *value)
699 {
700         int ret;
701         struct scmi_xfer *t;
702         struct scmi_msg_sensor_reading_get *sensor;
703         struct sensors_info *si = ph->get_priv(ph);
704         struct scmi_sensor_info *s = si->sensors + sensor_id;
705
706         ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
707                                       sizeof(*sensor), 0, &t);
708         if (ret)
709                 return ret;
710
711         sensor = t->tx.buf;
712         sensor->id = cpu_to_le32(sensor_id);
713         if (s->async) {
714                 sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
715                 ret = ph->xops->do_xfer_with_response(ph, t);
716                 if (!ret) {
717                         struct scmi_resp_sensor_reading_complete *resp;
718
719                         resp = t->rx.buf;
720                         if (le32_to_cpu(resp->id) == sensor_id)
721                                 *value =
722                                         get_unaligned_le64(&resp->readings_low);
723                         else
724                                 ret = -EPROTO;
725                 }
726         } else {
727                 sensor->flags = cpu_to_le32(0);
728                 ret = ph->xops->do_xfer(ph, t);
729                 if (!ret)
730                         *value = get_unaligned_le64(t->rx.buf);
731         }
732
733         ph->xops->xfer_put(ph, t);
734         return ret;
735 }
736
737 static inline void
738 scmi_parse_sensor_readings(struct scmi_sensor_reading *out,
739                            const struct scmi_sensor_reading_resp *in)
740 {
741         out->value = get_unaligned_le64((void *)&in->sensor_value_low);
742         out->timestamp = get_unaligned_le64((void *)&in->timestamp_low);
743 }
744
745 /**
746  * scmi_sensor_reading_get_timestamped  - Read multiple-axis timestamped values
747  * @ph: Protocol handle
748  * @sensor_id: Sensor ID
749  * @count: The length of the provided @readings array
750  * @readings: An array of elements each representing a timestamped per-axis
751  *            reading of type @struct scmi_sensor_reading.
752  *            Returned readings are ordered as the @axis descriptors array
753  *            included in @struct scmi_sensor_info and the max number of
754  *            returned elements is min(@count, @num_axis); ideally the provided
755  *            array should be of length @count equal to @num_axis.
756  *
757  * Return: 0 on Success
758  */
759 static int
760 scmi_sensor_reading_get_timestamped(const struct scmi_protocol_handle *ph,
761                                     u32 sensor_id, u8 count,
762                                     struct scmi_sensor_reading *readings)
763 {
764         int ret;
765         struct scmi_xfer *t;
766         struct scmi_msg_sensor_reading_get *sensor;
767         struct sensors_info *si = ph->get_priv(ph);
768         struct scmi_sensor_info *s = si->sensors + sensor_id;
769
770         if (!count || !readings ||
771             (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis))
772                 return -EINVAL;
773
774         ret = ph->xops->xfer_get_init(ph, SENSOR_READING_GET,
775                                       sizeof(*sensor), 0, &t);
776         if (ret)
777                 return ret;
778
779         sensor = t->tx.buf;
780         sensor->id = cpu_to_le32(sensor_id);
781         if (s->async) {
782                 sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC);
783                 ret = ph->xops->do_xfer_with_response(ph, t);
784                 if (!ret) {
785                         int i;
786                         struct scmi_resp_sensor_reading_complete_v3 *resp;
787
788                         resp = t->rx.buf;
789                         /* Retrieve only the number of requested axis anyway */
790                         if (le32_to_cpu(resp->id) == sensor_id)
791                                 for (i = 0; i < count; i++)
792                                         scmi_parse_sensor_readings(&readings[i],
793                                                                    &resp->readings[i]);
794                         else
795                                 ret = -EPROTO;
796                 }
797         } else {
798                 sensor->flags = cpu_to_le32(0);
799                 ret = ph->xops->do_xfer(ph, t);
800                 if (!ret) {
801                         int i;
802                         struct scmi_sensor_reading_resp *resp_readings;
803
804                         resp_readings = t->rx.buf;
805                         for (i = 0; i < count; i++)
806                                 scmi_parse_sensor_readings(&readings[i],
807                                                            &resp_readings[i]);
808                 }
809         }
810
811         ph->xops->xfer_put(ph, t);
812         return ret;
813 }
814
815 static const struct scmi_sensor_info *
816 scmi_sensor_info_get(const struct scmi_protocol_handle *ph, u32 sensor_id)
817 {
818         struct sensors_info *si = ph->get_priv(ph);
819
820         return si->sensors + sensor_id;
821 }
822
823 static int scmi_sensor_count_get(const struct scmi_protocol_handle *ph)
824 {
825         struct sensors_info *si = ph->get_priv(ph);
826
827         return si->num_sensors;
828 }
829
830 static const struct scmi_sensor_proto_ops sensor_proto_ops = {
831         .count_get = scmi_sensor_count_get,
832         .info_get = scmi_sensor_info_get,
833         .trip_point_config = scmi_sensor_trip_point_config,
834         .reading_get = scmi_sensor_reading_get,
835         .reading_get_timestamped = scmi_sensor_reading_get_timestamped,
836         .config_get = scmi_sensor_config_get,
837         .config_set = scmi_sensor_config_set,
838 };
839
840 static int scmi_sensor_set_notify_enabled(const struct scmi_protocol_handle *ph,
841                                           u8 evt_id, u32 src_id, bool enable)
842 {
843         int ret;
844
845         switch (evt_id) {
846         case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
847                 ret = scmi_sensor_trip_point_notify(ph, src_id, enable);
848                 break;
849         case SCMI_EVENT_SENSOR_UPDATE:
850                 ret = scmi_sensor_continuous_update_notify(ph, src_id, enable);
851                 break;
852         default:
853                 ret = -EINVAL;
854                 break;
855         }
856
857         if (ret)
858                 pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n",
859                          evt_id, src_id, ret);
860
861         return ret;
862 }
863
864 static void *
865 scmi_sensor_fill_custom_report(const struct scmi_protocol_handle *ph,
866                                u8 evt_id, ktime_t timestamp,
867                                const void *payld, size_t payld_sz,
868                                void *report, u32 *src_id)
869 {
870         void *rep = NULL;
871
872         switch (evt_id) {
873         case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT:
874         {
875                 const struct scmi_sensor_trip_notify_payld *p = payld;
876                 struct scmi_sensor_trip_point_report *r = report;
877
878                 if (sizeof(*p) != payld_sz)
879                         break;
880
881                 r->timestamp = timestamp;
882                 r->agent_id = le32_to_cpu(p->agent_id);
883                 r->sensor_id = le32_to_cpu(p->sensor_id);
884                 r->trip_point_desc = le32_to_cpu(p->trip_point_desc);
885                 *src_id = r->sensor_id;
886                 rep = r;
887                 break;
888         }
889         case SCMI_EVENT_SENSOR_UPDATE:
890         {
891                 int i;
892                 struct scmi_sensor_info *s;
893                 const struct scmi_sensor_update_notify_payld *p = payld;
894                 struct scmi_sensor_update_report *r = report;
895                 struct sensors_info *sinfo = ph->get_priv(ph);
896
897                 /* payld_sz is variable for this event */
898                 r->sensor_id = le32_to_cpu(p->sensor_id);
899                 if (r->sensor_id >= sinfo->num_sensors)
900                         break;
901                 r->timestamp = timestamp;
902                 r->agent_id = le32_to_cpu(p->agent_id);
903                 s = &sinfo->sensors[r->sensor_id];
904                 /*
905                  * The generated report r (@struct scmi_sensor_update_report)
906                  * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS
907                  * readings: here it is filled with the effective @num_axis
908                  * readings defined for this sensor or 1 for scalar sensors.
909                  */
910                 r->readings_count = s->num_axis ?: 1;
911                 for (i = 0; i < r->readings_count; i++)
912                         scmi_parse_sensor_readings(&r->readings[i],
913                                                    &p->readings[i]);
914                 *src_id = r->sensor_id;
915                 rep = r;
916                 break;
917         }
918         default:
919                 break;
920         }
921
922         return rep;
923 }
924
925 static int scmi_sensor_get_num_sources(const struct scmi_protocol_handle *ph)
926 {
927         struct sensors_info *si = ph->get_priv(ph);
928
929         return si->num_sensors;
930 }
931
932 static const struct scmi_event sensor_events[] = {
933         {
934                 .id = SCMI_EVENT_SENSOR_TRIP_POINT_EVENT,
935                 .max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld),
936                 .max_report_sz = sizeof(struct scmi_sensor_trip_point_report),
937         },
938         {
939                 .id = SCMI_EVENT_SENSOR_UPDATE,
940                 .max_payld_sz =
941                         sizeof(struct scmi_sensor_update_notify_payld) +
942                          SCMI_MAX_NUM_SENSOR_AXIS *
943                          sizeof(struct scmi_sensor_reading_resp),
944                 .max_report_sz = sizeof(struct scmi_sensor_update_report) +
945                                   SCMI_MAX_NUM_SENSOR_AXIS *
946                                   sizeof(struct scmi_sensor_reading),
947         },
948 };
949
950 static const struct scmi_event_ops sensor_event_ops = {
951         .get_num_sources = scmi_sensor_get_num_sources,
952         .set_notify_enabled = scmi_sensor_set_notify_enabled,
953         .fill_custom_report = scmi_sensor_fill_custom_report,
954 };
955
956 static const struct scmi_protocol_events sensor_protocol_events = {
957         .queue_sz = SCMI_PROTO_QUEUE_SZ,
958         .ops = &sensor_event_ops,
959         .evts = sensor_events,
960         .num_events = ARRAY_SIZE(sensor_events),
961 };
962
963 static int scmi_sensors_protocol_init(const struct scmi_protocol_handle *ph)
964 {
965         u32 version;
966         int ret;
967         struct sensors_info *sinfo;
968
969         ph->xops->version_get(ph, &version);
970
971         dev_dbg(ph->dev, "Sensor Version %d.%d\n",
972                 PROTOCOL_REV_MAJOR(version), PROTOCOL_REV_MINOR(version));
973
974         sinfo = devm_kzalloc(ph->dev, sizeof(*sinfo), GFP_KERNEL);
975         if (!sinfo)
976                 return -ENOMEM;
977         sinfo->version = version;
978
979         ret = scmi_sensor_attributes_get(ph, sinfo);
980         if (ret)
981                 return ret;
982         sinfo->sensors = devm_kcalloc(ph->dev, sinfo->num_sensors,
983                                       sizeof(*sinfo->sensors), GFP_KERNEL);
984         if (!sinfo->sensors)
985                 return -ENOMEM;
986
987         ret = scmi_sensor_description_get(ph, sinfo);
988         if (ret)
989                 return ret;
990
991         return ph->set_priv(ph, sinfo);
992 }
993
994 static const struct scmi_protocol scmi_sensors = {
995         .id = SCMI_PROTOCOL_SENSOR,
996         .owner = THIS_MODULE,
997         .instance_init = &scmi_sensors_protocol_init,
998         .ops = &sensor_proto_ops,
999         .events = &sensor_protocol_events,
1000 };
1001
1002 DEFINE_SCMI_PROTOCOL_REGISTER_UNREGISTER(sensors, scmi_sensors)