perf probe: Fix memory leak when synthesizing SDT probes
[linux-2.6-microblaze.git] / drivers / cpufreq / pxa2xx-cpufreq.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  *  Copyright (C) 2002,2003 Intrinsyc Software
4  *
5  * History:
6  *   31-Jul-2002 : Initial version [FB]
7  *   29-Jan-2003 : added PXA255 support [FB]
8  *   20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
9  *
10  * Note:
11  *   This driver may change the memory bus clock rate, but will not do any
12  *   platform specific access timing changes... for example if you have flash
13  *   memory connected to CS0, you will need to register a platform specific
14  *   notifier which will adjust the memory access strobes to maintain a
15  *   minimum strobe width.
16  */
17
18 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
19
20 #include <linux/kernel.h>
21 #include <linux/module.h>
22 #include <linux/sched.h>
23 #include <linux/init.h>
24 #include <linux/cpufreq.h>
25 #include <linux/err.h>
26 #include <linux/regulator/consumer.h>
27 #include <linux/io.h>
28
29 #include <mach/pxa2xx-regs.h>
30 #include <mach/smemc.h>
31
32 #ifdef DEBUG
33 static unsigned int freq_debug;
34 module_param(freq_debug, uint, 0);
35 MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
36 #else
37 #define freq_debug  0
38 #endif
39
40 static struct regulator *vcc_core;
41
42 static unsigned int pxa27x_maxfreq;
43 module_param(pxa27x_maxfreq, uint, 0);
44 MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
45                  "(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
46
47 struct pxa_cpufreq_data {
48         struct clk *clk_core;
49 };
50 static struct pxa_cpufreq_data  pxa_cpufreq_data;
51
52 struct pxa_freqs {
53         unsigned int khz;
54         int vmin;
55         int vmax;
56 };
57
58 /*
59  * PXA255 definitions
60  */
61 static const struct pxa_freqs pxa255_run_freqs[] =
62 {
63         /* CPU   MEMBUS            run  turbo PXbus SDRAM */
64         { 99500, -1, -1},       /*  99,   99,   50,   50  */
65         {132700, -1, -1},       /* 133,  133,   66,   66  */
66         {199100, -1, -1},       /* 199,  199,   99,   99  */
67         {265400, -1, -1},       /* 265,  265,  133,   66  */
68         {331800, -1, -1},       /* 331,  331,  166,   83  */
69         {398100, -1, -1},       /* 398,  398,  196,   99  */
70 };
71
72 /* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
73 static const struct pxa_freqs pxa255_turbo_freqs[] =
74 {
75         /* CPU                     run  turbo PXbus SDRAM */
76         { 99500, -1, -1},       /*  99,   99,   50,   50  */
77         {199100, -1, -1},       /*  99,  199,   50,   99  */
78         {298500, -1, -1},       /*  99,  287,   50,   99  */
79         {298600, -1, -1},       /* 199,  287,   99,   99  */
80         {398100, -1, -1},       /* 199,  398,   99,   99  */
81 };
82
83 #define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
84 #define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
85
86 static struct cpufreq_frequency_table
87         pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
88 static struct cpufreq_frequency_table
89         pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
90
91 static unsigned int pxa255_turbo_table;
92 module_param(pxa255_turbo_table, uint, 0);
93 MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
94
95 static struct pxa_freqs pxa27x_freqs[] = {
96         {104000,  900000, 1705000 },
97         {156000, 1000000, 1705000 },
98         {208000, 1180000, 1705000 },
99         {312000, 1250000, 1705000 },
100         {416000, 1350000, 1705000 },
101         {520000, 1450000, 1705000 },
102         {624000, 1550000, 1705000 }
103 };
104
105 #define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
106 static struct cpufreq_frequency_table
107         pxa27x_freq_table[NUM_PXA27x_FREQS+1];
108
109 extern unsigned get_clk_frequency_khz(int info);
110
111 #ifdef CONFIG_REGULATOR
112
113 static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
114 {
115         int ret = 0;
116         int vmin, vmax;
117
118         if (!cpu_is_pxa27x())
119                 return 0;
120
121         vmin = pxa_freq->vmin;
122         vmax = pxa_freq->vmax;
123         if ((vmin == -1) || (vmax == -1))
124                 return 0;
125
126         ret = regulator_set_voltage(vcc_core, vmin, vmax);
127         if (ret)
128                 pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
129         return ret;
130 }
131
132 static void pxa_cpufreq_init_voltages(void)
133 {
134         vcc_core = regulator_get(NULL, "vcc_core");
135         if (IS_ERR(vcc_core)) {
136                 pr_info("Didn't find vcc_core regulator\n");
137                 vcc_core = NULL;
138         } else {
139                 pr_info("Found vcc_core regulator\n");
140         }
141 }
142 #else
143 static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
144 {
145         return 0;
146 }
147
148 static void pxa_cpufreq_init_voltages(void) { }
149 #endif
150
151 static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
152                              const struct pxa_freqs **pxa_freqs)
153 {
154         if (cpu_is_pxa25x()) {
155                 if (!pxa255_turbo_table) {
156                         *pxa_freqs = pxa255_run_freqs;
157                         *freq_table = pxa255_run_freq_table;
158                 } else {
159                         *pxa_freqs = pxa255_turbo_freqs;
160                         *freq_table = pxa255_turbo_freq_table;
161                 }
162         } else if (cpu_is_pxa27x()) {
163                 *pxa_freqs = pxa27x_freqs;
164                 *freq_table = pxa27x_freq_table;
165         } else {
166                 BUG();
167         }
168 }
169
170 static void pxa27x_guess_max_freq(void)
171 {
172         if (!pxa27x_maxfreq) {
173                 pxa27x_maxfreq = 416000;
174                 pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
175                         pxa27x_maxfreq);
176         } else {
177                 pxa27x_maxfreq *= 1000;
178         }
179 }
180
181 static unsigned int pxa_cpufreq_get(unsigned int cpu)
182 {
183         struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
184
185         return (unsigned int) clk_get_rate(data->clk_core) / 1000;
186 }
187
188 static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
189 {
190         struct cpufreq_frequency_table *pxa_freqs_table;
191         const struct pxa_freqs *pxa_freq_settings;
192         struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
193         unsigned int new_freq_cpu;
194         int ret = 0;
195
196         /* Get the current policy */
197         find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
198
199         new_freq_cpu = pxa_freq_settings[idx].khz;
200
201         if (freq_debug)
202                 pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n",
203                          policy->cur / 1000,  new_freq_cpu / 1000);
204
205         if (vcc_core && new_freq_cpu > policy->cur) {
206                 ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
207                 if (ret)
208                         return ret;
209         }
210
211         clk_set_rate(data->clk_core, new_freq_cpu * 1000);
212
213         /*
214          * Even if voltage setting fails, we don't report it, as the frequency
215          * change succeeded. The voltage reduction is not a critical failure,
216          * only power savings will suffer from this.
217          *
218          * Note: if the voltage change fails, and a return value is returned, a
219          * bug is triggered (seems a deadlock). Should anybody find out where,
220          * the "return 0" should become a "return ret".
221          */
222         if (vcc_core && new_freq_cpu < policy->cur)
223                 ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
224
225         return 0;
226 }
227
228 static int pxa_cpufreq_init(struct cpufreq_policy *policy)
229 {
230         int i;
231         unsigned int freq;
232         struct cpufreq_frequency_table *pxa255_freq_table;
233         const struct pxa_freqs *pxa255_freqs;
234
235         /* try to guess pxa27x cpu */
236         if (cpu_is_pxa27x())
237                 pxa27x_guess_max_freq();
238
239         pxa_cpufreq_init_voltages();
240
241         /* set default policy and cpuinfo */
242         policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
243
244         /* Generate pxa25x the run cpufreq_frequency_table struct */
245         for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
246                 pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
247                 pxa255_run_freq_table[i].driver_data = i;
248         }
249         pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
250
251         /* Generate pxa25x the turbo cpufreq_frequency_table struct */
252         for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
253                 pxa255_turbo_freq_table[i].frequency =
254                         pxa255_turbo_freqs[i].khz;
255                 pxa255_turbo_freq_table[i].driver_data = i;
256         }
257         pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
258
259         pxa255_turbo_table = !!pxa255_turbo_table;
260
261         /* Generate the pxa27x cpufreq_frequency_table struct */
262         for (i = 0; i < NUM_PXA27x_FREQS; i++) {
263                 freq = pxa27x_freqs[i].khz;
264                 if (freq > pxa27x_maxfreq)
265                         break;
266                 pxa27x_freq_table[i].frequency = freq;
267                 pxa27x_freq_table[i].driver_data = i;
268         }
269         pxa27x_freq_table[i].driver_data = i;
270         pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
271
272         /*
273          * Set the policy's minimum and maximum frequencies from the tables
274          * just constructed.  This sets cpuinfo.mxx_freq, min and max.
275          */
276         if (cpu_is_pxa25x()) {
277                 find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
278                 pr_info("using %s frequency table\n",
279                         pxa255_turbo_table ? "turbo" : "run");
280
281                 policy->freq_table = pxa255_freq_table;
282         }
283         else if (cpu_is_pxa27x()) {
284                 policy->freq_table = pxa27x_freq_table;
285         }
286
287         pr_info("frequency change support initialized\n");
288
289         return 0;
290 }
291
292 static struct cpufreq_driver pxa_cpufreq_driver = {
293         .flags  = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
294         .verify = cpufreq_generic_frequency_table_verify,
295         .target_index = pxa_set_target,
296         .init   = pxa_cpufreq_init,
297         .get    = pxa_cpufreq_get,
298         .name   = "PXA2xx",
299         .driver_data = &pxa_cpufreq_data,
300 };
301
302 static int __init pxa_cpu_init(void)
303 {
304         int ret = -ENODEV;
305
306         pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core");
307         if (IS_ERR(pxa_cpufreq_data.clk_core))
308                 return PTR_ERR(pxa_cpufreq_data.clk_core);
309
310         if (cpu_is_pxa25x() || cpu_is_pxa27x())
311                 ret = cpufreq_register_driver(&pxa_cpufreq_driver);
312         return ret;
313 }
314
315 static void __exit pxa_cpu_exit(void)
316 {
317         cpufreq_unregister_driver(&pxa_cpufreq_driver);
318 }
319
320
321 MODULE_AUTHOR("Intrinsyc Software Inc.");
322 MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
323 MODULE_LICENSE("GPL");
324 module_init(pxa_cpu_init);
325 module_exit(pxa_cpu_exit);