drivers/char/ipmi/ipmi_smic_sm.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * ipmi_smic_sm.c
   4  *
   5  * The state-machine driver for an IPMI SMIC driver
   6  *
   7  * It started as a copy of Corey Minyard's driver for the KSC interface
   8  * and the kernel patch "mmcdev-patch-245" by HP
   9  *
  10  * modified by: Hannes Schulz <schulz@schwaar.com>
  11  *              ipmi@schwaar.com
  12  *
  13  *
  14  * Corey Minyard's driver for the KSC interface has the following
  15  * copyright notice:
  16  *   Copyright 2002 MontaVista Software Inc.
  17  *
  18  * the kernel patch "mmcdev-patch-245" by HP has the following
  19  * copyright notice:
  20  * (c) Copyright 2001 Grant Grundler (c) Copyright
  21  * 2001 Hewlett-Packard Company
  22  */
  23
  24 #define DEBUG /* So dev_dbg() is always available. */
  25
  26 #include <linux/kernel.h> /* For printk. */
  27 #include <linux/string.h>
  28 #include <linux/module.h>
  29 #include <linux/moduleparam.h>
  30 #include <linux/ipmi_msgdefs.h>         /* for completion codes */
  31 #include "ipmi_si_sm.h"
  32
  33 /* smic_debug is a bit-field
  34  *      SMIC_DEBUG_ENABLE -     turned on for now
  35  *      SMIC_DEBUG_MSG -        commands and their responses
  36  *      SMIC_DEBUG_STATES -     state machine
  37 */
  38 #define SMIC_DEBUG_STATES       4
  39 #define SMIC_DEBUG_MSG          2
  40 #define SMIC_DEBUG_ENABLE       1
  41
  42 static int smic_debug = 1;
  43 module_param(smic_debug, int, 0644);
  44 MODULE_PARM_DESC(smic_debug, "debug bitmask, 1=enable, 2=messages, 4=states");
  45
  46 enum smic_states {
  47         SMIC_IDLE,
  48         SMIC_START_OP,
  49         SMIC_OP_OK,
  50         SMIC_WRITE_START,
  51         SMIC_WRITE_NEXT,
  52         SMIC_WRITE_END,
  53         SMIC_WRITE2READ,
  54         SMIC_READ_START,
  55         SMIC_READ_NEXT,
  56         SMIC_READ_END,
  57         SMIC_HOSED
  58 };
  59
  60 #define MAX_SMIC_READ_SIZE 80
  61 #define MAX_SMIC_WRITE_SIZE 80
  62 #define SMIC_MAX_ERROR_RETRIES 3
  63
  64 /* Timeouts in microseconds. */
  65 #define SMIC_RETRY_TIMEOUT (2*USEC_PER_SEC)
  66
  67 /* SMIC Flags Register Bits */
  68 #define SMIC_RX_DATA_READY      0x80
  69 #define SMIC_TX_DATA_READY      0x40
  70
  71 /*
  72  * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by
  73  * a few systems, and then only by Systems Management
  74  * Interrupts, not by the OS.  Always ignore these bits.
  75  *
  76  */
  77 #define SMIC_SMI                0x10
  78 #define SMIC_EVM_DATA_AVAIL     0x08
  79 #define SMIC_SMS_DATA_AVAIL     0x04
  80 #define SMIC_FLAG_BSY           0x01
  81
  82 /* SMIC Error Codes */
  83 #define EC_NO_ERROR             0x00
  84 #define EC_ABORTED              0x01
  85 #define EC_ILLEGAL_CONTROL      0x02
  86 #define EC_NO_RESPONSE          0x03
  87 #define EC_ILLEGAL_COMMAND      0x04
  88 #define EC_BUFFER_FULL          0x05
  89
  90 struct si_sm_data {
  91         enum smic_states state;
  92         struct si_sm_io *io;
  93         unsigned char    write_data[MAX_SMIC_WRITE_SIZE];
  94         int              write_pos;
  95         int              write_count;
  96         int              orig_write_count;
  97         unsigned char    read_data[MAX_SMIC_READ_SIZE];
  98         int              read_pos;
  99         int              truncated;
 100         unsigned int     error_retries;
 101         long             smic_timeout;
 102 };
 103
 104 static unsigned int init_smic_data(struct si_sm_data *smic,
 105                                    struct si_sm_io *io)
 106 {
 107         smic->state = SMIC_IDLE;
 108         smic->io = io;
 109         smic->write_pos = 0;
 110         smic->write_count = 0;
 111         smic->orig_write_count = 0;
 112         smic->read_pos = 0;
 113         smic->error_retries = 0;
 114         smic->truncated = 0;
 115         smic->smic_timeout = SMIC_RETRY_TIMEOUT;
 116
 117         /* We use 3 bytes of I/O. */
 118         return 3;
 119 }
 120
 121 static int start_smic_transaction(struct si_sm_data *smic,
 122                                   unsigned char *data, unsigned int size)
 123 {
 124         unsigned int i;
 125
 126         if (size < 2)
 127                 return IPMI_REQ_LEN_INVALID_ERR;
 128         if (size > MAX_SMIC_WRITE_SIZE)
 129                 return IPMI_REQ_LEN_EXCEEDED_ERR;
 130
 131         if ((smic->state != SMIC_IDLE) && (smic->state != SMIC_HOSED)) {
 132                 dev_warn(smic->io->dev,
 133                          "SMIC in invalid state %d\n", smic->state);
 134                 return IPMI_NOT_IN_MY_STATE_ERR;
 135         }
 136
 137         if (smic_debug & SMIC_DEBUG_MSG) {
 138                 dev_dbg(smic->io->dev, "%s -", __func__);
 139                 for (i = 0; i < size; i++)
 140                         pr_cont(" %02x", data[i]);
 141                 pr_cont("\n");
 142         }
 143         smic->error_retries = 0;
 144         memcpy(smic->write_data, data, size);
 145         smic->write_count = size;
 146         smic->orig_write_count = size;
 147         smic->write_pos = 0;
 148         smic->read_pos = 0;
 149         smic->state = SMIC_START_OP;
 150         smic->smic_timeout = SMIC_RETRY_TIMEOUT;
 151         return 0;
 152 }
 153
 154 static int smic_get_result(struct si_sm_data *smic,
 155                            unsigned char *data, unsigned int length)
 156 {
 157         int i;
 158
 159         if (smic_debug & SMIC_DEBUG_MSG) {
 160                 dev_dbg(smic->io->dev, "smic_get result -");
 161                 for (i = 0; i < smic->read_pos; i++)
 162                         pr_cont(" %02x", smic->read_data[i]);
 163                 pr_cont("\n");
 164         }
 165         if (length < smic->read_pos) {
 166                 smic->read_pos = length;
 167                 smic->truncated = 1;
 168         }
 169         memcpy(data, smic->read_data, smic->read_pos);
 170
 171         if ((length >= 3) && (smic->read_pos < 3)) {
 172                 data[2] = IPMI_ERR_UNSPECIFIED;
 173                 smic->read_pos = 3;
 174         }
 175         if (smic->truncated) {
 176                 data[2] = IPMI_ERR_MSG_TRUNCATED;
 177                 smic->truncated = 0;
 178         }
 179         return smic->read_pos;
 180 }
 181
 182 static inline unsigned char read_smic_flags(struct si_sm_data *smic)
 183 {
 184         return smic->io->inputb(smic->io, 2);
 185 }
 186
 187 static inline unsigned char read_smic_status(struct si_sm_data *smic)
 188 {
 189         return smic->io->inputb(smic->io, 1);
 190 }
 191
 192 static inline unsigned char read_smic_data(struct si_sm_data *smic)
 193 {
 194         return smic->io->inputb(smic->io, 0);
 195 }
 196
 197 static inline void write_smic_flags(struct si_sm_data *smic,
 198                                     unsigned char   flags)
 199 {
 200         smic->io->outputb(smic->io, 2, flags);
 201 }
 202
 203 static inline void write_smic_control(struct si_sm_data *smic,
 204                                       unsigned char   control)
 205 {
 206         smic->io->outputb(smic->io, 1, control);
 207 }
 208
 209 static inline void write_si_sm_data(struct si_sm_data *smic,
 210                                     unsigned char   data)
 211 {
 212         smic->io->outputb(smic->io, 0, data);
 213 }
 214
 215 static inline void start_error_recovery(struct si_sm_data *smic, char *reason)
 216 {
 217         (smic->error_retries)++;
 218         if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) {
 219                 if (smic_debug & SMIC_DEBUG_ENABLE)
 220                         pr_warn("ipmi_smic_drv: smic hosed: %s\n", reason);
 221                 smic->state = SMIC_HOSED;
 222         } else {
 223                 smic->write_count = smic->orig_write_count;
 224                 smic->write_pos = 0;
 225                 smic->read_pos = 0;
 226                 smic->state = SMIC_START_OP;
 227                 smic->smic_timeout = SMIC_RETRY_TIMEOUT;
 228         }
 229 }
 230
 231 static inline void write_next_byte(struct si_sm_data *smic)
 232 {
 233         write_si_sm_data(smic, smic->write_data[smic->write_pos]);
 234         (smic->write_pos)++;
 235         (smic->write_count)--;
 236 }
 237
 238 static inline void read_next_byte(struct si_sm_data *smic)
 239 {
 240         if (smic->read_pos >= MAX_SMIC_READ_SIZE) {
 241                 read_smic_data(smic);
 242                 smic->truncated = 1;
 243         } else {
 244                 smic->read_data[smic->read_pos] = read_smic_data(smic);
 245                 smic->read_pos++;
 246         }
 247 }
 248
 249 /*  SMIC Control/Status Code Components */
 250 #define SMIC_GET_STATUS         0x00    /* Control form's name */
 251 #define SMIC_READY              0x00    /* Status  form's name */
 252 #define SMIC_WR_START           0x01    /* Unified Control/Status names... */
 253 #define SMIC_WR_NEXT            0x02
 254 #define SMIC_WR_END             0x03
 255 #define SMIC_RD_START           0x04
 256 #define SMIC_RD_NEXT            0x05
 257 #define SMIC_RD_END             0x06
 258 #define SMIC_CODE_MASK          0x0f
 259
 260 #define SMIC_CONTROL            0x00
 261 #define SMIC_STATUS             0x80
 262 #define SMIC_CS_MASK            0x80
 263
 264 #define SMIC_SMS                0x40
 265 #define SMIC_SMM                0x60
 266 #define SMIC_STREAM_MASK        0x60
 267
 268 /*  SMIC Control Codes */
 269 #define SMIC_CC_SMS_GET_STATUS  (SMIC_CONTROL|SMIC_SMS|SMIC_GET_STATUS)
 270 #define SMIC_CC_SMS_WR_START    (SMIC_CONTROL|SMIC_SMS|SMIC_WR_START)
 271 #define SMIC_CC_SMS_WR_NEXT     (SMIC_CONTROL|SMIC_SMS|SMIC_WR_NEXT)
 272 #define SMIC_CC_SMS_WR_END      (SMIC_CONTROL|SMIC_SMS|SMIC_WR_END)
 273 #define SMIC_CC_SMS_RD_START    (SMIC_CONTROL|SMIC_SMS|SMIC_RD_START)
 274 #define SMIC_CC_SMS_RD_NEXT     (SMIC_CONTROL|SMIC_SMS|SMIC_RD_NEXT)
 275 #define SMIC_CC_SMS_RD_END      (SMIC_CONTROL|SMIC_SMS|SMIC_RD_END)
 276
 277 #define SMIC_CC_SMM_GET_STATUS  (SMIC_CONTROL|SMIC_SMM|SMIC_GET_STATUS)
 278 #define SMIC_CC_SMM_WR_START    (SMIC_CONTROL|SMIC_SMM|SMIC_WR_START)
 279 #define SMIC_CC_SMM_WR_NEXT     (SMIC_CONTROL|SMIC_SMM|SMIC_WR_NEXT)
 280 #define SMIC_CC_SMM_WR_END      (SMIC_CONTROL|SMIC_SMM|SMIC_WR_END)
 281 #define SMIC_CC_SMM_RD_START    (SMIC_CONTROL|SMIC_SMM|SMIC_RD_START)
 282 #define SMIC_CC_SMM_RD_NEXT     (SMIC_CONTROL|SMIC_SMM|SMIC_RD_NEXT)
 283 #define SMIC_CC_SMM_RD_END      (SMIC_CONTROL|SMIC_SMM|SMIC_RD_END)
 284
 285 /*  SMIC Status Codes */
 286 #define SMIC_SC_SMS_READY       (SMIC_STATUS|SMIC_SMS|SMIC_READY)
 287 #define SMIC_SC_SMS_WR_START    (SMIC_STATUS|SMIC_SMS|SMIC_WR_START)
 288 #define SMIC_SC_SMS_WR_NEXT     (SMIC_STATUS|SMIC_SMS|SMIC_WR_NEXT)
 289 #define SMIC_SC_SMS_WR_END      (SMIC_STATUS|SMIC_SMS|SMIC_WR_END)
 290 #define SMIC_SC_SMS_RD_START    (SMIC_STATUS|SMIC_SMS|SMIC_RD_START)
 291 #define SMIC_SC_SMS_RD_NEXT     (SMIC_STATUS|SMIC_SMS|SMIC_RD_NEXT)
 292 #define SMIC_SC_SMS_RD_END      (SMIC_STATUS|SMIC_SMS|SMIC_RD_END)
 293
 294 #define SMIC_SC_SMM_READY       (SMIC_STATUS|SMIC_SMM|SMIC_READY)
 295 #define SMIC_SC_SMM_WR_START    (SMIC_STATUS|SMIC_SMM|SMIC_WR_START)
 296 #define SMIC_SC_SMM_WR_NEXT     (SMIC_STATUS|SMIC_SMM|SMIC_WR_NEXT)
 297 #define SMIC_SC_SMM_WR_END      (SMIC_STATUS|SMIC_SMM|SMIC_WR_END)
 298 #define SMIC_SC_SMM_RD_START    (SMIC_STATUS|SMIC_SMM|SMIC_RD_START)
 299 #define SMIC_SC_SMM_RD_NEXT     (SMIC_STATUS|SMIC_SMM|SMIC_RD_NEXT)
 300 #define SMIC_SC_SMM_RD_END      (SMIC_STATUS|SMIC_SMM|SMIC_RD_END)
 301
 302 /* these are the control/status codes we actually use
 303         SMIC_CC_SMS_GET_STATUS  0x40
 304         SMIC_CC_SMS_WR_START    0x41
 305         SMIC_CC_SMS_WR_NEXT     0x42
 306         SMIC_CC_SMS_WR_END      0x43
 307         SMIC_CC_SMS_RD_START    0x44
 308         SMIC_CC_SMS_RD_NEXT     0x45
 309         SMIC_CC_SMS_RD_END      0x46
 310
 311         SMIC_SC_SMS_READY       0xC0
 312         SMIC_SC_SMS_WR_START    0xC1
 313         SMIC_SC_SMS_WR_NEXT     0xC2
 314         SMIC_SC_SMS_WR_END      0xC3
 315         SMIC_SC_SMS_RD_START    0xC4
 316         SMIC_SC_SMS_RD_NEXT     0xC5
 317         SMIC_SC_SMS_RD_END      0xC6
 318 */
 319
 320 static enum si_sm_result smic_event(struct si_sm_data *smic, long time)
 321 {
 322         unsigned char status;
 323         unsigned char flags;
 324         unsigned char data;
 325
 326         if (smic->state == SMIC_HOSED) {
 327                 init_smic_data(smic, smic->io);
 328                 return SI_SM_HOSED;
 329         }
 330         if (smic->state != SMIC_IDLE) {
 331                 if (smic_debug & SMIC_DEBUG_STATES)
 332                         dev_dbg(smic->io->dev,
 333                                 "%s - smic->smic_timeout = %ld, time = %ld\n",
 334                                 __func__, smic->smic_timeout, time);
 335                 /*
 336                  * FIXME: smic_event is sometimes called with time >
 337                  * SMIC_RETRY_TIMEOUT
 338                  */
 339                 if (time < SMIC_RETRY_TIMEOUT) {
 340                         smic->smic_timeout -= time;
 341                         if (smic->smic_timeout < 0) {
 342                                 start_error_recovery(smic, "smic timed out.");
 343                                 return SI_SM_CALL_WITH_DELAY;
 344                         }
 345                 }
 346         }
 347         flags = read_smic_flags(smic);
 348         if (flags & SMIC_FLAG_BSY)
 349                 return SI_SM_CALL_WITH_DELAY;
 350
 351         status = read_smic_status(smic);
 352         if (smic_debug & SMIC_DEBUG_STATES)
 353                 dev_dbg(smic->io->dev,
 354                         "%s - state = %d, flags = 0x%02x, status = 0x%02x\n",
 355                         __func__, smic->state, flags, status);
 356
 357         switch (smic->state) {
 358         case SMIC_IDLE:
 359                 /* in IDLE we check for available messages */
 360                 if (flags & SMIC_SMS_DATA_AVAIL)
 361                         return SI_SM_ATTN;
 362                 return SI_SM_IDLE;
 363
 364         case SMIC_START_OP:
 365                 /* sanity check whether smic is really idle */
 366                 write_smic_control(smic, SMIC_CC_SMS_GET_STATUS);
 367                 write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 368                 smic->state = SMIC_OP_OK;
 369                 break;
 370
 371         case SMIC_OP_OK:
 372                 if (status != SMIC_SC_SMS_READY) {
 373                         /* this should not happen */
 374                         start_error_recovery(smic,
 375                                              "state = SMIC_OP_OK,"
 376                                              " status != SMIC_SC_SMS_READY");
 377                         return SI_SM_CALL_WITH_DELAY;
 378                 }
 379                 /* OK so far; smic is idle let us start ... */
 380                 write_smic_control(smic, SMIC_CC_SMS_WR_START);
 381                 write_next_byte(smic);
 382                 write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 383                 smic->state = SMIC_WRITE_START;
 384                 break;
 385
 386         case SMIC_WRITE_START:
 387                 if (status != SMIC_SC_SMS_WR_START) {
 388                         start_error_recovery(smic,
 389                                              "state = SMIC_WRITE_START, "
 390                                              "status != SMIC_SC_SMS_WR_START");
 391                         return SI_SM_CALL_WITH_DELAY;
 392                 }
 393                 /*
 394                  * we must not issue WR_(NEXT|END) unless
 395                  * TX_DATA_READY is set
 396                  * */
 397                 if (flags & SMIC_TX_DATA_READY) {
 398                         if (smic->write_count == 1) {
 399                                 /* last byte */
 400                                 write_smic_control(smic, SMIC_CC_SMS_WR_END);
 401                                 smic->state = SMIC_WRITE_END;
 402                         } else {
 403                                 write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
 404                                 smic->state = SMIC_WRITE_NEXT;
 405                         }
 406                         write_next_byte(smic);
 407                         write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 408                 } else
 409                         return SI_SM_CALL_WITH_DELAY;
 410                 break;
 411
 412         case SMIC_WRITE_NEXT:
 413                 if (status != SMIC_SC_SMS_WR_NEXT) {
 414                         start_error_recovery(smic,
 415                                              "state = SMIC_WRITE_NEXT, "
 416                                              "status != SMIC_SC_SMS_WR_NEXT");
 417                         return SI_SM_CALL_WITH_DELAY;
 418                 }
 419                 /* this is the same code as in SMIC_WRITE_START */
 420                 if (flags & SMIC_TX_DATA_READY) {
 421                         if (smic->write_count == 1) {
 422                                 write_smic_control(smic, SMIC_CC_SMS_WR_END);
 423                                 smic->state = SMIC_WRITE_END;
 424                         } else {
 425                                 write_smic_control(smic, SMIC_CC_SMS_WR_NEXT);
 426                                 smic->state = SMIC_WRITE_NEXT;
 427                         }
 428                         write_next_byte(smic);
 429                         write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 430                 } else
 431                         return SI_SM_CALL_WITH_DELAY;
 432                 break;
 433
 434         case SMIC_WRITE_END:
 435                 if (status != SMIC_SC_SMS_WR_END) {
 436                         start_error_recovery(smic,
 437                                              "state = SMIC_WRITE_END, "
 438                                              "status != SMIC_SC_SMS_WR_END");
 439                         return SI_SM_CALL_WITH_DELAY;
 440                 }
 441                 /* data register holds an error code */
 442                 data = read_smic_data(smic);
 443                 if (data != 0) {
 444                         if (smic_debug & SMIC_DEBUG_ENABLE)
 445                                 dev_dbg(smic->io->dev,
 446                                         "SMIC_WRITE_END: data = %02x\n",
 447                                         data);
 448                         start_error_recovery(smic,
 449                                              "state = SMIC_WRITE_END, "
 450                                              "data != SUCCESS");
 451                         return SI_SM_CALL_WITH_DELAY;
 452                 } else
 453                         smic->state = SMIC_WRITE2READ;
 454                 break;
 455
 456         case SMIC_WRITE2READ:
 457                 /*
 458                  * we must wait for RX_DATA_READY to be set before we
 459                  * can continue
 460                  */
 461                 if (flags & SMIC_RX_DATA_READY) {
 462                         write_smic_control(smic, SMIC_CC_SMS_RD_START);
 463                         write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 464                         smic->state = SMIC_READ_START;
 465                 } else
 466                         return SI_SM_CALL_WITH_DELAY;
 467                 break;
 468
 469         case SMIC_READ_START:
 470                 if (status != SMIC_SC_SMS_RD_START) {
 471                         start_error_recovery(smic,
 472                                              "state = SMIC_READ_START, "
 473                                              "status != SMIC_SC_SMS_RD_START");
 474                         return SI_SM_CALL_WITH_DELAY;
 475                 }
 476                 if (flags & SMIC_RX_DATA_READY) {
 477                         read_next_byte(smic);
 478                         write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
 479                         write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 480                         smic->state = SMIC_READ_NEXT;
 481                 } else
 482                         return SI_SM_CALL_WITH_DELAY;
 483                 break;
 484
 485         case SMIC_READ_NEXT:
 486                 switch (status) {
 487                 /*
 488                  * smic tells us that this is the last byte to be read
 489                  * --> clean up
 490                  */
 491                 case SMIC_SC_SMS_RD_END:
 492                         read_next_byte(smic);
 493                         write_smic_control(smic, SMIC_CC_SMS_RD_END);
 494                         write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 495                         smic->state = SMIC_READ_END;
 496                         break;
 497                 case SMIC_SC_SMS_RD_NEXT:
 498                         if (flags & SMIC_RX_DATA_READY) {
 499                                 read_next_byte(smic);
 500                                 write_smic_control(smic, SMIC_CC_SMS_RD_NEXT);
 501                                 write_smic_flags(smic, flags | SMIC_FLAG_BSY);
 502                                 smic->state = SMIC_READ_NEXT;
 503                         } else
 504                                 return SI_SM_CALL_WITH_DELAY;
 505                         break;
 506                 default:
 507                         start_error_recovery(
 508                                 smic,
 509                                 "state = SMIC_READ_NEXT, "
 510                                 "status != SMIC_SC_SMS_RD_(NEXT|END)");
 511                         return SI_SM_CALL_WITH_DELAY;
 512                 }
 513                 break;
 514
 515         case SMIC_READ_END:
 516                 if (status != SMIC_SC_SMS_READY) {
 517                         start_error_recovery(smic,
 518                                              "state = SMIC_READ_END, "
 519                                              "status != SMIC_SC_SMS_READY");
 520                         return SI_SM_CALL_WITH_DELAY;
 521                 }
 522                 data = read_smic_data(smic);
 523                 /* data register holds an error code */
 524                 if (data != 0) {
 525                         if (smic_debug & SMIC_DEBUG_ENABLE)
 526                                 dev_dbg(smic->io->dev,
 527                                         "SMIC_READ_END: data = %02x\n",
 528                                         data);
 529                         start_error_recovery(smic,
 530                                              "state = SMIC_READ_END, "
 531                                              "data != SUCCESS");
 532                         return SI_SM_CALL_WITH_DELAY;
 533                 } else {
 534                         smic->state = SMIC_IDLE;
 535                         return SI_SM_TRANSACTION_COMPLETE;
 536                 }
 537
 538         case SMIC_HOSED:
 539                 init_smic_data(smic, smic->io);
 540                 return SI_SM_HOSED;
 541
 542         default:
 543                 if (smic_debug & SMIC_DEBUG_ENABLE) {
 544                         dev_dbg(smic->io->dev,
 545                                 "smic->state = %d\n", smic->state);
 546                         start_error_recovery(smic, "state = UNKNOWN");
 547                         return SI_SM_CALL_WITH_DELAY;
 548                 }
 549         }
 550         smic->smic_timeout = SMIC_RETRY_TIMEOUT;
 551         return SI_SM_CALL_WITHOUT_DELAY;
 552 }
 553
 554 static int smic_detect(struct si_sm_data *smic)
 555 {
 556         /*
 557          * It's impossible for the SMIC fnags register to be all 1's,
 558          * (assuming a properly functioning, self-initialized BMC)
 559          * but that's what you get from reading a bogus address, so we
 560          * test that first.
 561          */
 562         if (read_smic_flags(smic) == 0xff)
 563                 return 1;
 564
 565         return 0;
 566 }
 567
 568 static void smic_cleanup(struct si_sm_data *kcs)
 569 {
 570 }
 571
 572 static int smic_size(void)
 573 {
 574         return sizeof(struct si_sm_data);
 575 }
 576
 577 const struct si_sm_handlers smic_smi_handlers = {
 578         .init_data         = init_smic_data,
 579         .start_transaction = start_smic_transaction,
 580         .get_result        = smic_get_result,
 581         .event             = smic_event,
 582         .detect            = smic_detect,
 583         .cleanup           = smic_cleanup,
 584         .size              = smic_size,
 585 };