drivers/acpi/acpi_lpss.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * ACPI support for Intel Lynxpoint LPSS.
   4  *
   5  * Copyright (C) 2013, Intel Corporation
   6  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
   7  *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
   8  */
   9
  10 #include <linux/acpi.h>
  11 #include <linux/clkdev.h>
  12 #include <linux/clk-provider.h>
  13 #include <linux/dmi.h>
  14 #include <linux/err.h>
  15 #include <linux/io.h>
  16 #include <linux/mutex.h>
  17 #include <linux/pci.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/platform_data/x86/clk-lpss.h>
  20 #include <linux/platform_data/x86/pmc_atom.h>
  21 #include <linux/pm_domain.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/pwm.h>
  24 #include <linux/suspend.h>
  25 #include <linux/delay.h>
  26
  27 #include "internal.h"
  28
  29 #ifdef CONFIG_X86_INTEL_LPSS
  30
  31 #include <asm/cpu_device_id.h>
  32 #include <asm/intel-family.h>
  33 #include <asm/iosf_mbi.h>
  34
  35 #define LPSS_ADDR(desc) ((unsigned long)&desc)
  36
  37 #define LPSS_CLK_SIZE   0x04
  38 #define LPSS_LTR_SIZE   0x18
  39
  40 /* Offsets relative to LPSS_PRIVATE_OFFSET */
  41 #define LPSS_CLK_DIVIDER_DEF_MASK       (BIT(1) | BIT(16))
  42 #define LPSS_RESETS                     0x04
  43 #define LPSS_RESETS_RESET_FUNC          BIT(0)
  44 #define LPSS_RESETS_RESET_APB           BIT(1)
  45 #define LPSS_GENERAL                    0x08
  46 #define LPSS_GENERAL_LTR_MODE_SW        BIT(2)
  47 #define LPSS_GENERAL_UART_RTS_OVRD      BIT(3)
  48 #define LPSS_SW_LTR                     0x10
  49 #define LPSS_AUTO_LTR                   0x14
  50 #define LPSS_LTR_SNOOP_REQ              BIT(15)
  51 #define LPSS_LTR_SNOOP_MASK             0x0000FFFF
  52 #define LPSS_LTR_SNOOP_LAT_1US          0x800
  53 #define LPSS_LTR_SNOOP_LAT_32US         0xC00
  54 #define LPSS_LTR_SNOOP_LAT_SHIFT        5
  55 #define LPSS_LTR_SNOOP_LAT_CUTOFF       3000
  56 #define LPSS_LTR_MAX_VAL                0x3FF
  57 #define LPSS_TX_INT                     0x20
  58 #define LPSS_TX_INT_MASK                BIT(1)
  59
  60 #define LPSS_PRV_REG_COUNT              9
  61
  62 /* LPSS Flags */
  63 #define LPSS_CLK                        BIT(0)
  64 #define LPSS_CLK_GATE                   BIT(1)
  65 #define LPSS_CLK_DIVIDER                BIT(2)
  66 #define LPSS_LTR                        BIT(3)
  67 #define LPSS_SAVE_CTX                   BIT(4)
  68 /*
  69  * For some devices the DSDT AML code for another device turns off the device
  70  * before our suspend handler runs, causing us to read/save all 1-s (0xffffffff)
  71  * as ctx register values.
  72  * Luckily these devices always use the same ctx register values, so we can
  73  * work around this by saving the ctx registers once on activation.
  74  */
  75 #define LPSS_SAVE_CTX_ONCE              BIT(5)
  76 #define LPSS_NO_D3_DELAY                BIT(6)
  77
  78 struct lpss_private_data;
  79
  80 struct lpss_device_desc {
  81         unsigned int flags;
  82         const char *clk_con_id;
  83         unsigned int prv_offset;
  84         size_t prv_size_override;
  85         struct property_entry *properties;
  86         void (*setup)(struct lpss_private_data *pdata);
  87         bool resume_from_noirq;
  88 };
  89
  90 static const struct lpss_device_desc lpss_dma_desc = {
  91         .flags = LPSS_CLK,
  92 };
  93
  94 struct lpss_private_data {
  95         struct acpi_device *adev;
  96         void __iomem *mmio_base;
  97         resource_size_t mmio_size;
  98         unsigned int fixed_clk_rate;
  99         struct clk *clk;
 100         const struct lpss_device_desc *dev_desc;
 101         u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
 102 };
 103
 104 /* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
 105 static u32 pmc_atom_d3_mask = 0xfe000ffe;
 106
 107 /* LPSS run time quirks */
 108 static unsigned int lpss_quirks;
 109
 110 /*
 111  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
 112  *
 113  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
 114  * it can be powered off automatically whenever the last LPSS device goes down.
 115  * In case of no power any access to the DMA controller will hang the system.
 116  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
 117  * well as on ASuS T100TA transformer.
 118  *
 119  * This quirk overrides power state of entire LPSS island to keep DMA powered
 120  * on whenever we have at least one other device in use.
 121  */
 122 #define LPSS_QUIRK_ALWAYS_POWER_ON      BIT(0)
 123
 124 /* UART Component Parameter Register */
 125 #define LPSS_UART_CPR                   0xF4
 126 #define LPSS_UART_CPR_AFCE              BIT(4)
 127
 128 static void lpss_uart_setup(struct lpss_private_data *pdata)
 129 {
 130         unsigned int offset;
 131         u32 val;
 132
 133         offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
 134         val = readl(pdata->mmio_base + offset);
 135         writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
 136
 137         val = readl(pdata->mmio_base + LPSS_UART_CPR);
 138         if (!(val & LPSS_UART_CPR_AFCE)) {
 139                 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
 140                 val = readl(pdata->mmio_base + offset);
 141                 val |= LPSS_GENERAL_UART_RTS_OVRD;
 142                 writel(val, pdata->mmio_base + offset);
 143         }
 144 }
 145
 146 static void lpss_deassert_reset(struct lpss_private_data *pdata)
 147 {
 148         unsigned int offset;
 149         u32 val;
 150
 151         offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
 152         val = readl(pdata->mmio_base + offset);
 153         val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 154         writel(val, pdata->mmio_base + offset);
 155 }
 156
 157 /*
 158  * BYT PWM used for backlight control by the i915 driver on systems without
 159  * the Crystal Cove PMIC.
 160  */
 161 static struct pwm_lookup byt_pwm_lookup[] = {
 162         PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
 163                                "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
 164                                "pwm-lpss-platform"),
 165 };
 166
 167 static void byt_pwm_setup(struct lpss_private_data *pdata)
 168 {
 169         struct acpi_device *adev = pdata->adev;
 170
 171         /* Only call pwm_add_table for the first PWM controller */
 172         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 173                 return;
 174
 175         pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
 176 }
 177
 178 #define LPSS_I2C_ENABLE                 0x6c
 179
 180 static void byt_i2c_setup(struct lpss_private_data *pdata)
 181 {
 182         const char *uid_str = acpi_device_uid(pdata->adev);
 183         acpi_handle handle = pdata->adev->handle;
 184         unsigned long long shared_host = 0;
 185         acpi_status status;
 186         long uid = 0;
 187
 188         /* Expected to always be true, but better safe then sorry */
 189         if (uid_str)
 190                 uid = simple_strtol(uid_str, NULL, 10);
 191
 192         /* Detect I2C bus shared with PUNIT and ignore its d3 status */
 193         status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
 194         if (ACPI_SUCCESS(status) && shared_host && uid)
 195                 pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
 196
 197         lpss_deassert_reset(pdata);
 198
 199         if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 200                 pdata->fixed_clk_rate = 133000000;
 201
 202         writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 203 }
 204
 205 /* BSW PWM used for backlight control by the i915 driver */
 206 static struct pwm_lookup bsw_pwm_lookup[] = {
 207         PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
 208                                "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
 209                                "pwm-lpss-platform"),
 210 };
 211
 212 static void bsw_pwm_setup(struct lpss_private_data *pdata)
 213 {
 214         struct acpi_device *adev = pdata->adev;
 215
 216         /* Only call pwm_add_table for the first PWM controller */
 217         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 218                 return;
 219
 220         pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
 221 }
 222
 223 static const struct lpss_device_desc lpt_dev_desc = {
 224         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 225                         | LPSS_SAVE_CTX,
 226         .prv_offset = 0x800,
 227 };
 228
 229 static const struct lpss_device_desc lpt_i2c_dev_desc = {
 230         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX,
 231         .prv_offset = 0x800,
 232 };
 233
 234 static struct property_entry uart_properties[] = {
 235         PROPERTY_ENTRY_U32("reg-io-width", 4),
 236         PROPERTY_ENTRY_U32("reg-shift", 2),
 237         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
 238         { },
 239 };
 240
 241 static const struct lpss_device_desc lpt_uart_dev_desc = {
 242         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 243                         | LPSS_SAVE_CTX,
 244         .clk_con_id = "baudclk",
 245         .prv_offset = 0x800,
 246         .setup = lpss_uart_setup,
 247         .properties = uart_properties,
 248 };
 249
 250 static const struct lpss_device_desc lpt_sdio_dev_desc = {
 251         .flags = LPSS_LTR,
 252         .prv_offset = 0x1000,
 253         .prv_size_override = 0x1018,
 254 };
 255
 256 static const struct lpss_device_desc byt_pwm_dev_desc = {
 257         .flags = LPSS_SAVE_CTX,
 258         .prv_offset = 0x800,
 259         .setup = byt_pwm_setup,
 260 };
 261
 262 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 263         .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY,
 264         .prv_offset = 0x800,
 265         .setup = bsw_pwm_setup,
 266         .resume_from_noirq = true,
 267 };
 268
 269 static const struct lpss_device_desc byt_uart_dev_desc = {
 270         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 271         .clk_con_id = "baudclk",
 272         .prv_offset = 0x800,
 273         .setup = lpss_uart_setup,
 274         .properties = uart_properties,
 275 };
 276
 277 static const struct lpss_device_desc bsw_uart_dev_desc = {
 278         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 279                         | LPSS_NO_D3_DELAY,
 280         .clk_con_id = "baudclk",
 281         .prv_offset = 0x800,
 282         .setup = lpss_uart_setup,
 283         .properties = uart_properties,
 284 };
 285
 286 static const struct lpss_device_desc byt_spi_dev_desc = {
 287         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 288         .prv_offset = 0x400,
 289 };
 290
 291 static const struct lpss_device_desc byt_sdio_dev_desc = {
 292         .flags = LPSS_CLK,
 293 };
 294
 295 static const struct lpss_device_desc byt_i2c_dev_desc = {
 296         .flags = LPSS_CLK | LPSS_SAVE_CTX,
 297         .prv_offset = 0x800,
 298         .setup = byt_i2c_setup,
 299         .resume_from_noirq = true,
 300 };
 301
 302 static const struct lpss_device_desc bsw_i2c_dev_desc = {
 303         .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 304         .prv_offset = 0x800,
 305         .setup = byt_i2c_setup,
 306         .resume_from_noirq = true,
 307 };
 308
 309 static const struct lpss_device_desc bsw_spi_dev_desc = {
 310         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 311                         | LPSS_NO_D3_DELAY,
 312         .prv_offset = 0x400,
 313         .setup = lpss_deassert_reset,
 314 };
 315
 316 static const struct x86_cpu_id lpss_cpu_ids[] = {
 317         X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT,     NULL),
 318         X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT,        NULL),
 319         {}
 320 };
 321
 322 #else
 323
 324 #define LPSS_ADDR(desc) (0UL)
 325
 326 #endif /* CONFIG_X86_INTEL_LPSS */
 327
 328 static const struct acpi_device_id acpi_lpss_device_ids[] = {
 329         /* Generic LPSS devices */
 330         { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
 331
 332         /* Lynxpoint LPSS devices */
 333         { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
 334         { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
 335         { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
 336         { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
 337         { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
 338         { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
 339         { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
 340         { "INT33C7", },
 341
 342         /* BayTrail LPSS devices */
 343         { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
 344         { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
 345         { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
 346         { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
 347         { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
 348         { "INT33B2", },
 349         { "INT33FC", },
 350
 351         /* Braswell LPSS devices */
 352         { "80862286", LPSS_ADDR(lpss_dma_desc) },
 353         { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 354         { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 355         { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 356         { "808622C0", LPSS_ADDR(lpss_dma_desc) },
 357         { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 358
 359         /* Broadwell LPSS devices */
 360         { "INT3430", LPSS_ADDR(lpt_dev_desc) },
 361         { "INT3431", LPSS_ADDR(lpt_dev_desc) },
 362         { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
 363         { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
 364         { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
 365         { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
 366         { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
 367         { "INT3437", },
 368
 369         /* Wildcat Point LPSS devices */
 370         { "INT3438", LPSS_ADDR(lpt_dev_desc) },
 371
 372         { }
 373 };
 374
 375 #ifdef CONFIG_X86_INTEL_LPSS
 376
 377 static int is_memory(struct acpi_resource *res, void *not_used)
 378 {
 379         struct resource r;
 380         return !acpi_dev_resource_memory(res, &r);
 381 }
 382
 383 /* LPSS main clock device. */
 384 static struct platform_device *lpss_clk_dev;
 385
 386 static inline void lpt_register_clock_device(void)
 387 {
 388         lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
 389 }
 390
 391 static int register_device_clock(struct acpi_device *adev,
 392                                  struct lpss_private_data *pdata)
 393 {
 394         const struct lpss_device_desc *dev_desc = pdata->dev_desc;
 395         const char *devname = dev_name(&adev->dev);
 396         struct clk *clk;
 397         struct lpss_clk_data *clk_data;
 398         const char *parent, *clk_name;
 399         void __iomem *prv_base;
 400
 401         if (!lpss_clk_dev)
 402                 lpt_register_clock_device();
 403
 404         clk_data = platform_get_drvdata(lpss_clk_dev);
 405         if (!clk_data)
 406                 return -ENODEV;
 407         clk = clk_data->clk;
 408
 409         if (!pdata->mmio_base
 410             || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 411                 return -ENODATA;
 412
 413         parent = clk_data->name;
 414         prv_base = pdata->mmio_base + dev_desc->prv_offset;
 415
 416         if (pdata->fixed_clk_rate) {
 417                 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
 418                                               pdata->fixed_clk_rate);
 419                 goto out;
 420         }
 421
 422         if (dev_desc->flags & LPSS_CLK_GATE) {
 423                 clk = clk_register_gate(NULL, devname, parent, 0,
 424                                         prv_base, 0, 0, NULL);
 425                 parent = devname;
 426         }
 427
 428         if (dev_desc->flags & LPSS_CLK_DIVIDER) {
 429                 /* Prevent division by zero */
 430                 if (!readl(prv_base))
 431                         writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
 432
 433                 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
 434                 if (!clk_name)
 435                         return -ENOMEM;
 436                 clk = clk_register_fractional_divider(NULL, clk_name, parent,
 437                                                       0, prv_base,
 438                                                       1, 15, 16, 15, 0, NULL);
 439                 parent = clk_name;
 440
 441                 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
 442                 if (!clk_name) {
 443                         kfree(parent);
 444                         return -ENOMEM;
 445                 }
 446                 clk = clk_register_gate(NULL, clk_name, parent,
 447                                         CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 448                                         prv_base, 31, 0, NULL);
 449                 kfree(parent);
 450                 kfree(clk_name);
 451         }
 452 out:
 453         if (IS_ERR(clk))
 454                 return PTR_ERR(clk);
 455
 456         pdata->clk = clk;
 457         clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
 458         return 0;
 459 }
 460
 461 struct lpss_device_links {
 462         const char *supplier_hid;
 463         const char *supplier_uid;
 464         const char *consumer_hid;
 465         const char *consumer_uid;
 466         u32 flags;
 467         const struct dmi_system_id *dep_missing_ids;
 468 };
 469
 470 /* Please keep this list sorted alphabetically by vendor and model */
 471 static const struct dmi_system_id i2c1_dep_missing_dmi_ids[] = {
 472         {
 473                 .matches = {
 474                         DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 475                         DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
 476                 },
 477         },
 478         {}
 479 };
 480
 481 /*
 482  * The _DEP method is used to identify dependencies but instead of creating
 483  * device links for every handle in _DEP, only links in the following list are
 484  * created. That is necessary because, in the general case, _DEP can refer to
 485  * devices that might not have drivers, or that are on different buses, or where
 486  * the supplier is not enumerated until after the consumer is probed.
 487  */
 488 static const struct lpss_device_links lpss_device_links[] = {
 489         /* CHT External sdcard slot controller depends on PMIC I2C ctrl */
 490         {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
 491         /* CHT iGPU depends on PMIC I2C controller */
 492         {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 493         /* BYT iGPU depends on the Embedded Controller I2C controller (UID 1) */
 494         {"80860F41", "1", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME,
 495          i2c1_dep_missing_dmi_ids},
 496         /* BYT CR iGPU depends on PMIC I2C controller (UID 5 on CR) */
 497         {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 498         /* BYT iGPU depends on PMIC I2C controller (UID 7 on non CR) */
 499         {"80860F41", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 500 };
 501
 502 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
 503                                   const struct lpss_device_links *link)
 504 {
 505         return acpi_dev_hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
 506 }
 507
 508 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
 509                                   const struct lpss_device_links *link)
 510 {
 511         return acpi_dev_hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
 512 }
 513
 514 struct hid_uid {
 515         const char *hid;
 516         const char *uid;
 517 };
 518
 519 static int match_hid_uid(struct device *dev, const void *data)
 520 {
 521         struct acpi_device *adev = ACPI_COMPANION(dev);
 522         const struct hid_uid *id = data;
 523
 524         if (!adev)
 525                 return 0;
 526
 527         return acpi_dev_hid_uid_match(adev, id->hid, id->uid);
 528 }
 529
 530 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
 531 {
 532         struct device *dev;
 533
 534         struct hid_uid data = {
 535                 .hid = hid,
 536                 .uid = uid,
 537         };
 538
 539         dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
 540         if (dev)
 541                 return dev;
 542
 543         return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
 544 }
 545
 546 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
 547 {
 548         struct acpi_handle_list dep_devices;
 549         acpi_status status;
 550         int i;
 551
 552         if (!acpi_has_method(adev->handle, "_DEP"))
 553                 return false;
 554
 555         status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
 556                                          &dep_devices);
 557         if (ACPI_FAILURE(status)) {
 558                 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
 559                 return false;
 560         }
 561
 562         for (i = 0; i < dep_devices.count; i++) {
 563                 if (dep_devices.handles[i] == handle)
 564                         return true;
 565         }
 566
 567         return false;
 568 }
 569
 570 static void acpi_lpss_link_consumer(struct device *dev1,
 571                                     const struct lpss_device_links *link)
 572 {
 573         struct device *dev2;
 574
 575         dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
 576         if (!dev2)
 577                 return;
 578
 579         if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
 580             || acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
 581                 device_link_add(dev2, dev1, link->flags);
 582
 583         put_device(dev2);
 584 }
 585
 586 static void acpi_lpss_link_supplier(struct device *dev1,
 587                                     const struct lpss_device_links *link)
 588 {
 589         struct device *dev2;
 590
 591         dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
 592         if (!dev2)
 593                 return;
 594
 595         if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
 596             || acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
 597                 device_link_add(dev1, dev2, link->flags);
 598
 599         put_device(dev2);
 600 }
 601
 602 static void acpi_lpss_create_device_links(struct acpi_device *adev,
 603                                           struct platform_device *pdev)
 604 {
 605         int i;
 606
 607         for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
 608                 const struct lpss_device_links *link = &lpss_device_links[i];
 609
 610                 if (acpi_lpss_is_supplier(adev, link))
 611                         acpi_lpss_link_consumer(&pdev->dev, link);
 612
 613                 if (acpi_lpss_is_consumer(adev, link))
 614                         acpi_lpss_link_supplier(&pdev->dev, link);
 615         }
 616 }
 617
 618 static int acpi_lpss_create_device(struct acpi_device *adev,
 619                                    const struct acpi_device_id *id)
 620 {
 621         const struct lpss_device_desc *dev_desc;
 622         struct lpss_private_data *pdata;
 623         struct resource_entry *rentry;
 624         struct list_head resource_list;
 625         struct platform_device *pdev;
 626         int ret;
 627
 628         dev_desc = (const struct lpss_device_desc *)id->driver_data;
 629         if (!dev_desc) {
 630                 pdev = acpi_create_platform_device(adev, NULL);
 631                 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
 632         }
 633         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 634         if (!pdata)
 635                 return -ENOMEM;
 636
 637         INIT_LIST_HEAD(&resource_list);
 638         ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
 639         if (ret < 0)
 640                 goto err_out;
 641
 642         list_for_each_entry(rentry, &resource_list, node)
 643                 if (resource_type(rentry->res) == IORESOURCE_MEM) {
 644                         if (dev_desc->prv_size_override)
 645                                 pdata->mmio_size = dev_desc->prv_size_override;
 646                         else
 647                                 pdata->mmio_size = resource_size(rentry->res);
 648                         pdata->mmio_base = ioremap(rentry->res->start,
 649                                                    pdata->mmio_size);
 650                         break;
 651                 }
 652
 653         acpi_dev_free_resource_list(&resource_list);
 654
 655         if (!pdata->mmio_base) {
 656                 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
 657                 adev->pnp.type.platform_id = 0;
 658                 /* Skip the device, but continue the namespace scan. */
 659                 ret = 0;
 660                 goto err_out;
 661         }
 662
 663         pdata->adev = adev;
 664         pdata->dev_desc = dev_desc;
 665
 666         if (dev_desc->setup)
 667                 dev_desc->setup(pdata);
 668
 669         if (dev_desc->flags & LPSS_CLK) {
 670                 ret = register_device_clock(adev, pdata);
 671                 if (ret) {
 672                         /* Skip the device, but continue the namespace scan. */
 673                         ret = 0;
 674                         goto err_out;
 675                 }
 676         }
 677
 678         /*
 679          * This works around a known issue in ACPI tables where LPSS devices
 680          * have _PS0 and _PS3 without _PSC (and no power resources), so
 681          * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 682          */
 683         acpi_device_fix_up_power(adev);
 684
 685         adev->driver_data = pdata;
 686         pdev = acpi_create_platform_device(adev, dev_desc->properties);
 687         if (!IS_ERR_OR_NULL(pdev)) {
 688                 acpi_lpss_create_device_links(adev, pdev);
 689                 return 1;
 690         }
 691
 692         ret = PTR_ERR(pdev);
 693         adev->driver_data = NULL;
 694
 695  err_out:
 696         kfree(pdata);
 697         return ret;
 698 }
 699
 700 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
 701 {
 702         return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 703 }
 704
 705 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
 706                              unsigned int reg)
 707 {
 708         writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 709 }
 710
 711 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
 712 {
 713         struct acpi_device *adev;
 714         struct lpss_private_data *pdata;
 715         unsigned long flags;
 716         int ret;
 717
 718         ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
 719         if (WARN_ON(ret))
 720                 return ret;
 721
 722         spin_lock_irqsave(&dev->power.lock, flags);
 723         if (pm_runtime_suspended(dev)) {
 724                 ret = -EAGAIN;
 725                 goto out;
 726         }
 727         pdata = acpi_driver_data(adev);
 728         if (WARN_ON(!pdata || !pdata->mmio_base)) {
 729                 ret = -ENODEV;
 730                 goto out;
 731         }
 732         *val = __lpss_reg_read(pdata, reg);
 733
 734  out:
 735         spin_unlock_irqrestore(&dev->power.lock, flags);
 736         return ret;
 737 }
 738
 739 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
 740                              char *buf)
 741 {
 742         u32 ltr_value = 0;
 743         unsigned int reg;
 744         int ret;
 745
 746         reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
 747         ret = lpss_reg_read(dev, reg, &ltr_value);
 748         if (ret)
 749                 return ret;
 750
 751         return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
 752 }
 753
 754 static ssize_t lpss_ltr_mode_show(struct device *dev,
 755                                   struct device_attribute *attr, char *buf)
 756 {
 757         u32 ltr_mode = 0;
 758         char *outstr;
 759         int ret;
 760
 761         ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
 762         if (ret)
 763                 return ret;
 764
 765         outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
 766         return sprintf(buf, "%s\n", outstr);
 767 }
 768
 769 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
 770 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
 771 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
 772
 773 static struct attribute *lpss_attrs[] = {
 774         &dev_attr_auto_ltr.attr,
 775         &dev_attr_sw_ltr.attr,
 776         &dev_attr_ltr_mode.attr,
 777         NULL,
 778 };
 779
 780 static const struct attribute_group lpss_attr_group = {
 781         .attrs = lpss_attrs,
 782         .name = "lpss_ltr",
 783 };
 784
 785 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
 786 {
 787         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 788         u32 ltr_mode, ltr_val;
 789
 790         ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
 791         if (val < 0) {
 792                 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
 793                         ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
 794                         __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 795                 }
 796                 return;
 797         }
 798         ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
 799         if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
 800                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
 801                 val = LPSS_LTR_MAX_VAL;
 802         } else if (val > LPSS_LTR_MAX_VAL) {
 803                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
 804                 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
 805         } else {
 806                 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
 807         }
 808         ltr_val |= val;
 809         __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
 810         if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
 811                 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
 812                 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 813         }
 814 }
 815
 816 #ifdef CONFIG_PM
 817 /**
 818  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
 819  * @dev: LPSS device
 820  * @pdata: pointer to the private data of the LPSS device
 821  *
 822  * Most LPSS devices have private registers which may loose their context when
 823  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
 824  * prv_reg_ctx array.
 825  */
 826 static void acpi_lpss_save_ctx(struct device *dev,
 827                                struct lpss_private_data *pdata)
 828 {
 829         unsigned int i;
 830
 831         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 832                 unsigned long offset = i * sizeof(u32);
 833
 834                 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
 835                 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
 836                         pdata->prv_reg_ctx[i], offset);
 837         }
 838 }
 839
 840 /**
 841  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
 842  * @dev: LPSS device
 843  * @pdata: pointer to the private data of the LPSS device
 844  *
 845  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
 846  */
 847 static void acpi_lpss_restore_ctx(struct device *dev,
 848                                   struct lpss_private_data *pdata)
 849 {
 850         unsigned int i;
 851
 852         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 853                 unsigned long offset = i * sizeof(u32);
 854
 855                 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
 856                 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
 857                         pdata->prv_reg_ctx[i], offset);
 858         }
 859 }
 860
 861 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
 862 {
 863         /*
 864          * The following delay is needed or the subsequent write operations may
 865          * fail. The LPSS devices are actually PCI devices and the PCI spec
 866          * expects 10ms delay before the device can be accessed after D3 to D0
 867          * transition. However some platforms like BSW does not need this delay.
 868          */
 869         unsigned int delay = 10;        /* default 10ms delay */
 870
 871         if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
 872                 delay = 0;
 873
 874         msleep(delay);
 875 }
 876
 877 static int acpi_lpss_activate(struct device *dev)
 878 {
 879         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 880         int ret;
 881
 882         ret = acpi_dev_resume(dev);
 883         if (ret)
 884                 return ret;
 885
 886         acpi_lpss_d3_to_d0_delay(pdata);
 887
 888         /*
 889          * This is called only on ->probe() stage where a device is either in
 890          * known state defined by BIOS or most likely powered off. Due to this
 891          * we have to deassert reset line to be sure that ->probe() will
 892          * recognize the device.
 893          */
 894         if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
 895                 lpss_deassert_reset(pdata);
 896
 897 #ifdef CONFIG_PM
 898         if (pdata->dev_desc->flags & LPSS_SAVE_CTX_ONCE)
 899                 acpi_lpss_save_ctx(dev, pdata);
 900 #endif
 901
 902         return 0;
 903 }
 904
 905 static void acpi_lpss_dismiss(struct device *dev)
 906 {
 907         acpi_dev_suspend(dev, false);
 908 }
 909
 910 /* IOSF SB for LPSS island */
 911 #define LPSS_IOSF_UNIT_LPIOEP           0xA0
 912 #define LPSS_IOSF_UNIT_LPIO1            0xAB
 913 #define LPSS_IOSF_UNIT_LPIO2            0xAC
 914
 915 #define LPSS_IOSF_PMCSR                 0x84
 916 #define LPSS_PMCSR_D0                   0
 917 #define LPSS_PMCSR_D3hot                3
 918 #define LPSS_PMCSR_Dx_MASK              GENMASK(1, 0)
 919
 920 #define LPSS_IOSF_GPIODEF0              0x154
 921 #define LPSS_GPIODEF0_DMA1_D3           BIT(2)
 922 #define LPSS_GPIODEF0_DMA2_D3           BIT(3)
 923 #define LPSS_GPIODEF0_DMA_D3_MASK       GENMASK(3, 2)
 924 #define LPSS_GPIODEF0_DMA_LLP           BIT(13)
 925
 926 static DEFINE_MUTEX(lpss_iosf_mutex);
 927 static bool lpss_iosf_d3_entered = true;
 928
 929 static void lpss_iosf_enter_d3_state(void)
 930 {
 931         u32 value1 = 0;
 932         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 933         u32 value2 = LPSS_PMCSR_D3hot;
 934         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 935         /*
 936          * PMC provides an information about actual status of the LPSS devices.
 937          * Here we read the values related to LPSS power island, i.e. LPSS
 938          * devices, excluding both LPSS DMA controllers, along with SCC domain.
 939          */
 940         u32 func_dis, d3_sts_0, pmc_status;
 941         int ret;
 942
 943         ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
 944         if (ret)
 945                 return;
 946
 947         mutex_lock(&lpss_iosf_mutex);
 948
 949         ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
 950         if (ret)
 951                 goto exit;
 952
 953         /*
 954          * Get the status of entire LPSS power island per device basis.
 955          * Shutdown both LPSS DMA controllers if and only if all other devices
 956          * are already in D3hot.
 957          */
 958         pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
 959         if (pmc_status)
 960                 goto exit;
 961
 962         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 963                         LPSS_IOSF_PMCSR, value2, mask2);
 964
 965         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 966                         LPSS_IOSF_PMCSR, value2, mask2);
 967
 968         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 969                         LPSS_IOSF_GPIODEF0, value1, mask1);
 970
 971         lpss_iosf_d3_entered = true;
 972
 973 exit:
 974         mutex_unlock(&lpss_iosf_mutex);
 975 }
 976
 977 static void lpss_iosf_exit_d3_state(void)
 978 {
 979         u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
 980                      LPSS_GPIODEF0_DMA_LLP;
 981         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 982         u32 value2 = LPSS_PMCSR_D0;
 983         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 984
 985         mutex_lock(&lpss_iosf_mutex);
 986
 987         if (!lpss_iosf_d3_entered)
 988                 goto exit;
 989
 990         lpss_iosf_d3_entered = false;
 991
 992         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 993                         LPSS_IOSF_GPIODEF0, value1, mask1);
 994
 995         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 996                         LPSS_IOSF_PMCSR, value2, mask2);
 997
 998         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 999                         LPSS_IOSF_PMCSR, value2, mask2);
1000
1001 exit:
1002         mutex_unlock(&lpss_iosf_mutex);
1003 }
1004
1005 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
1006 {
1007         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1008         int ret;
1009
1010         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
1011                 acpi_lpss_save_ctx(dev, pdata);
1012
1013         ret = acpi_dev_suspend(dev, wakeup);
1014
1015         /*
1016          * This call must be last in the sequence, otherwise PMC will return
1017          * wrong status for devices being about to be powered off. See
1018          * lpss_iosf_enter_d3_state() for further information.
1019          */
1020         if (acpi_target_system_state() == ACPI_STATE_S0 &&
1021             lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1022                 lpss_iosf_enter_d3_state();
1023
1024         return ret;
1025 }
1026
1027 static int acpi_lpss_resume(struct device *dev)
1028 {
1029         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1030         int ret;
1031
1032         /*
1033          * This call is kept first to be in symmetry with
1034          * acpi_lpss_runtime_suspend() one.
1035          */
1036         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1037                 lpss_iosf_exit_d3_state();
1038
1039         ret = acpi_dev_resume(dev);
1040         if (ret)
1041                 return ret;
1042
1043         acpi_lpss_d3_to_d0_delay(pdata);
1044
1045         if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
1046                 acpi_lpss_restore_ctx(dev, pdata);
1047
1048         return 0;
1049 }
1050
1051 #ifdef CONFIG_PM_SLEEP
1052 static int acpi_lpss_do_suspend_late(struct device *dev)
1053 {
1054         int ret;
1055
1056         if (dev_pm_skip_suspend(dev))
1057                 return 0;
1058
1059         ret = pm_generic_suspend_late(dev);
1060         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1061 }
1062
1063 static int acpi_lpss_suspend_late(struct device *dev)
1064 {
1065         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1066
1067         if (pdata->dev_desc->resume_from_noirq)
1068                 return 0;
1069
1070         return acpi_lpss_do_suspend_late(dev);
1071 }
1072
1073 static int acpi_lpss_suspend_noirq(struct device *dev)
1074 {
1075         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1076         int ret;
1077
1078         if (pdata->dev_desc->resume_from_noirq) {
1079                 /*
1080                  * The driver's ->suspend_late callback will be invoked by
1081                  * acpi_lpss_do_suspend_late(), with the assumption that the
1082                  * driver really wanted to run that code in ->suspend_noirq, but
1083                  * it could not run after acpi_dev_suspend() and the driver
1084                  * expected the latter to be called in the "late" phase.
1085                  */
1086                 ret = acpi_lpss_do_suspend_late(dev);
1087                 if (ret)
1088                         return ret;
1089         }
1090
1091         return acpi_subsys_suspend_noirq(dev);
1092 }
1093
1094 static int acpi_lpss_do_resume_early(struct device *dev)
1095 {
1096         int ret = acpi_lpss_resume(dev);
1097
1098         return ret ? ret : pm_generic_resume_early(dev);
1099 }
1100
1101 static int acpi_lpss_resume_early(struct device *dev)
1102 {
1103         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1104
1105         if (pdata->dev_desc->resume_from_noirq)
1106                 return 0;
1107
1108         if (dev_pm_skip_resume(dev))
1109                 return 0;
1110
1111         return acpi_lpss_do_resume_early(dev);
1112 }
1113
1114 static int acpi_lpss_resume_noirq(struct device *dev)
1115 {
1116         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1117         int ret;
1118
1119         /* Follow acpi_subsys_resume_noirq(). */
1120         if (dev_pm_skip_resume(dev))
1121                 return 0;
1122
1123         ret = pm_generic_resume_noirq(dev);
1124         if (ret)
1125                 return ret;
1126
1127         if (!pdata->dev_desc->resume_from_noirq)
1128                 return 0;
1129
1130         /*
1131          * The driver's ->resume_early callback will be invoked by
1132          * acpi_lpss_do_resume_early(), with the assumption that the driver
1133          * really wanted to run that code in ->resume_noirq, but it could not
1134          * run before acpi_dev_resume() and the driver expected the latter to be
1135          * called in the "early" phase.
1136          */
1137         return acpi_lpss_do_resume_early(dev);
1138 }
1139
1140 static int acpi_lpss_do_restore_early(struct device *dev)
1141 {
1142         int ret = acpi_lpss_resume(dev);
1143
1144         return ret ? ret : pm_generic_restore_early(dev);
1145 }
1146
1147 static int acpi_lpss_restore_early(struct device *dev)
1148 {
1149         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1150
1151         if (pdata->dev_desc->resume_from_noirq)
1152                 return 0;
1153
1154         return acpi_lpss_do_restore_early(dev);
1155 }
1156
1157 static int acpi_lpss_restore_noirq(struct device *dev)
1158 {
1159         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1160         int ret;
1161
1162         ret = pm_generic_restore_noirq(dev);
1163         if (ret)
1164                 return ret;
1165
1166         if (!pdata->dev_desc->resume_from_noirq)
1167                 return 0;
1168
1169         /* This is analogous to what happens in acpi_lpss_resume_noirq(). */
1170         return acpi_lpss_do_restore_early(dev);
1171 }
1172
1173 static int acpi_lpss_do_poweroff_late(struct device *dev)
1174 {
1175         int ret = pm_generic_poweroff_late(dev);
1176
1177         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1178 }
1179
1180 static int acpi_lpss_poweroff_late(struct device *dev)
1181 {
1182         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1183
1184         if (dev_pm_skip_suspend(dev))
1185                 return 0;
1186
1187         if (pdata->dev_desc->resume_from_noirq)
1188                 return 0;
1189
1190         return acpi_lpss_do_poweroff_late(dev);
1191 }
1192
1193 static int acpi_lpss_poweroff_noirq(struct device *dev)
1194 {
1195         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1196
1197         if (dev_pm_skip_suspend(dev))
1198                 return 0;
1199
1200         if (pdata->dev_desc->resume_from_noirq) {
1201                 /* This is analogous to the acpi_lpss_suspend_noirq() case. */
1202                 int ret = acpi_lpss_do_poweroff_late(dev);
1203                 if (ret)
1204                         return ret;
1205         }
1206
1207         return pm_generic_poweroff_noirq(dev);
1208 }
1209 #endif /* CONFIG_PM_SLEEP */
1210
1211 static int acpi_lpss_runtime_suspend(struct device *dev)
1212 {
1213         int ret = pm_generic_runtime_suspend(dev);
1214
1215         return ret ? ret : acpi_lpss_suspend(dev, true);
1216 }
1217
1218 static int acpi_lpss_runtime_resume(struct device *dev)
1219 {
1220         int ret = acpi_lpss_resume(dev);
1221
1222         return ret ? ret : pm_generic_runtime_resume(dev);
1223 }
1224 #endif /* CONFIG_PM */
1225
1226 static struct dev_pm_domain acpi_lpss_pm_domain = {
1227 #ifdef CONFIG_PM
1228         .activate = acpi_lpss_activate,
1229         .dismiss = acpi_lpss_dismiss,
1230 #endif
1231         .ops = {
1232 #ifdef CONFIG_PM
1233 #ifdef CONFIG_PM_SLEEP
1234                 .prepare = acpi_subsys_prepare,
1235                 .complete = acpi_subsys_complete,
1236                 .suspend = acpi_subsys_suspend,
1237                 .suspend_late = acpi_lpss_suspend_late,
1238                 .suspend_noirq = acpi_lpss_suspend_noirq,
1239                 .resume_noirq = acpi_lpss_resume_noirq,
1240                 .resume_early = acpi_lpss_resume_early,
1241                 .freeze = acpi_subsys_freeze,
1242                 .poweroff = acpi_subsys_poweroff,
1243                 .poweroff_late = acpi_lpss_poweroff_late,
1244                 .poweroff_noirq = acpi_lpss_poweroff_noirq,
1245                 .restore_noirq = acpi_lpss_restore_noirq,
1246                 .restore_early = acpi_lpss_restore_early,
1247 #endif
1248                 .runtime_suspend = acpi_lpss_runtime_suspend,
1249                 .runtime_resume = acpi_lpss_runtime_resume,
1250 #endif
1251         },
1252 };
1253
1254 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1255                                      unsigned long action, void *data)
1256 {
1257         struct platform_device *pdev = to_platform_device(data);
1258         struct lpss_private_data *pdata;
1259         struct acpi_device *adev;
1260         const struct acpi_device_id *id;
1261
1262         id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1263         if (!id || !id->driver_data)
1264                 return 0;
1265
1266         if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1267                 return 0;
1268
1269         pdata = acpi_driver_data(adev);
1270         if (!pdata)
1271                 return 0;
1272
1273         if (pdata->mmio_base &&
1274             pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1275                 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1276                 return 0;
1277         }
1278
1279         switch (action) {
1280         case BUS_NOTIFY_BIND_DRIVER:
1281                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1282                 break;
1283         case BUS_NOTIFY_DRIVER_NOT_BOUND:
1284         case BUS_NOTIFY_UNBOUND_DRIVER:
1285                 dev_pm_domain_set(&pdev->dev, NULL);
1286                 break;
1287         case BUS_NOTIFY_ADD_DEVICE:
1288                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1289                 if (pdata->dev_desc->flags & LPSS_LTR)
1290                         return sysfs_create_group(&pdev->dev.kobj,
1291                                                   &lpss_attr_group);
1292                 break;
1293         case BUS_NOTIFY_DEL_DEVICE:
1294                 if (pdata->dev_desc->flags & LPSS_LTR)
1295                         sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1296                 dev_pm_domain_set(&pdev->dev, NULL);
1297                 break;
1298         default:
1299                 break;
1300         }
1301
1302         return 0;
1303 }
1304
1305 static struct notifier_block acpi_lpss_nb = {
1306         .notifier_call = acpi_lpss_platform_notify,
1307 };
1308
1309 static void acpi_lpss_bind(struct device *dev)
1310 {
1311         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1312
1313         if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1314                 return;
1315
1316         if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1317                 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1318         else
1319                 dev_err(dev, "MMIO size insufficient to access LTR\n");
1320 }
1321
1322 static void acpi_lpss_unbind(struct device *dev)
1323 {
1324         dev->power.set_latency_tolerance = NULL;
1325 }
1326
1327 static struct acpi_scan_handler lpss_handler = {
1328         .ids = acpi_lpss_device_ids,
1329         .attach = acpi_lpss_create_device,
1330         .bind = acpi_lpss_bind,
1331         .unbind = acpi_lpss_unbind,
1332 };
1333
1334 void __init acpi_lpss_init(void)
1335 {
1336         const struct x86_cpu_id *id;
1337         int ret;
1338
1339         ret = lpt_clk_init();
1340         if (ret)
1341                 return;
1342
1343         id = x86_match_cpu(lpss_cpu_ids);
1344         if (id)
1345                 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1346
1347         bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1348         acpi_scan_add_handler(&lpss_handler);
1349 }
1350
1351 #else
1352
1353 static struct acpi_scan_handler lpss_handler = {
1354         .ids = acpi_lpss_device_ids,
1355 };
1356
1357 void __init acpi_lpss_init(void)
1358 {
1359         acpi_scan_add_handler(&lpss_handler);
1360 }
1361
1362 #endif /* CONFIG_X86_INTEL_LPSS */