drivers/acpi/acpi_lpss.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * ACPI support for Intel Lynxpoint LPSS.
   4  *
   5  * Copyright (C) 2013, Intel Corporation
   6  * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
   7  *          Rafael J. Wysocki <rafael.j.wysocki@intel.com>
   8  */
   9
  10 #include <linux/acpi.h>
  11 #include <linux/clkdev.h>
  12 #include <linux/clk-provider.h>
  13 #include <linux/dmi.h>
  14 #include <linux/err.h>
  15 #include <linux/io.h>
  16 #include <linux/mutex.h>
  17 #include <linux/pci.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/platform_data/x86/clk-lpss.h>
  20 #include <linux/platform_data/x86/pmc_atom.h>
  21 #include <linux/pm_domain.h>
  22 #include <linux/pm_runtime.h>
  23 #include <linux/pwm.h>
  24 #include <linux/suspend.h>
  25 #include <linux/delay.h>
  26
  27 #include "internal.h"
  28
  29 #ifdef CONFIG_X86_INTEL_LPSS
  30
  31 #include <asm/cpu_device_id.h>
  32 #include <asm/intel-family.h>
  33 #include <asm/iosf_mbi.h>
  34
  35 #define LPSS_ADDR(desc) ((unsigned long)&desc)
  36
  37 #define LPSS_CLK_SIZE   0x04
  38 #define LPSS_LTR_SIZE   0x18
  39
  40 /* Offsets relative to LPSS_PRIVATE_OFFSET */
  41 #define LPSS_CLK_DIVIDER_DEF_MASK       (BIT(1) | BIT(16))
  42 #define LPSS_RESETS                     0x04
  43 #define LPSS_RESETS_RESET_FUNC          BIT(0)
  44 #define LPSS_RESETS_RESET_APB           BIT(1)
  45 #define LPSS_GENERAL                    0x08
  46 #define LPSS_GENERAL_LTR_MODE_SW        BIT(2)
  47 #define LPSS_GENERAL_UART_RTS_OVRD      BIT(3)
  48 #define LPSS_SW_LTR                     0x10
  49 #define LPSS_AUTO_LTR                   0x14
  50 #define LPSS_LTR_SNOOP_REQ              BIT(15)
  51 #define LPSS_LTR_SNOOP_MASK             0x0000FFFF
  52 #define LPSS_LTR_SNOOP_LAT_1US          0x800
  53 #define LPSS_LTR_SNOOP_LAT_32US         0xC00
  54 #define LPSS_LTR_SNOOP_LAT_SHIFT        5
  55 #define LPSS_LTR_SNOOP_LAT_CUTOFF       3000
  56 #define LPSS_LTR_MAX_VAL                0x3FF
  57 #define LPSS_TX_INT                     0x20
  58 #define LPSS_TX_INT_MASK                BIT(1)
  59
  60 #define LPSS_PRV_REG_COUNT              9
  61
  62 /* LPSS Flags */
  63 #define LPSS_CLK                        BIT(0)
  64 #define LPSS_CLK_GATE                   BIT(1)
  65 #define LPSS_CLK_DIVIDER                BIT(2)
  66 #define LPSS_LTR                        BIT(3)
  67 #define LPSS_SAVE_CTX                   BIT(4)
  68 /*
  69  * For some devices the DSDT AML code for another device turns off the device
  70  * before our suspend handler runs, causing us to read/save all 1-s (0xffffffff)
  71  * as ctx register values.
  72  * Luckily these devices always use the same ctx register values, so we can
  73  * work around this by saving the ctx registers once on activation.
  74  */
  75 #define LPSS_SAVE_CTX_ONCE              BIT(5)
  76 #define LPSS_NO_D3_DELAY                BIT(6)
  77
  78 struct lpss_private_data;
  79
  80 struct lpss_device_desc {
  81         unsigned int flags;
  82         const char *clk_con_id;
  83         unsigned int prv_offset;
  84         size_t prv_size_override;
  85         struct property_entry *properties;
  86         void (*setup)(struct lpss_private_data *pdata);
  87         bool resume_from_noirq;
  88 };
  89
  90 static const struct lpss_device_desc lpss_dma_desc = {
  91         .flags = LPSS_CLK,
  92 };
  93
  94 struct lpss_private_data {
  95         struct acpi_device *adev;
  96         void __iomem *mmio_base;
  97         resource_size_t mmio_size;
  98         unsigned int fixed_clk_rate;
  99         struct clk *clk;
 100         const struct lpss_device_desc *dev_desc;
 101         u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
 102 };
 103
 104 /* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
 105 static u32 pmc_atom_d3_mask = 0xfe000ffe;
 106
 107 /* LPSS run time quirks */
 108 static unsigned int lpss_quirks;
 109
 110 /*
 111  * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
 112  *
 113  * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
 114  * it can be powered off automatically whenever the last LPSS device goes down.
 115  * In case of no power any access to the DMA controller will hang the system.
 116  * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
 117  * well as on ASuS T100TA transformer.
 118  *
 119  * This quirk overrides power state of entire LPSS island to keep DMA powered
 120  * on whenever we have at least one other device in use.
 121  */
 122 #define LPSS_QUIRK_ALWAYS_POWER_ON      BIT(0)
 123
 124 /* UART Component Parameter Register */
 125 #define LPSS_UART_CPR                   0xF4
 126 #define LPSS_UART_CPR_AFCE              BIT(4)
 127
 128 static void lpss_uart_setup(struct lpss_private_data *pdata)
 129 {
 130         unsigned int offset;
 131         u32 val;
 132
 133         offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
 134         val = readl(pdata->mmio_base + offset);
 135         writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
 136
 137         val = readl(pdata->mmio_base + LPSS_UART_CPR);
 138         if (!(val & LPSS_UART_CPR_AFCE)) {
 139                 offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
 140                 val = readl(pdata->mmio_base + offset);
 141                 val |= LPSS_GENERAL_UART_RTS_OVRD;
 142                 writel(val, pdata->mmio_base + offset);
 143         }
 144 }
 145
 146 static void lpss_deassert_reset(struct lpss_private_data *pdata)
 147 {
 148         unsigned int offset;
 149         u32 val;
 150
 151         offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
 152         val = readl(pdata->mmio_base + offset);
 153         val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
 154         writel(val, pdata->mmio_base + offset);
 155 }
 156
 157 /*
 158  * BYT PWM used for backlight control by the i915 driver on systems without
 159  * the Crystal Cove PMIC.
 160  */
 161 static struct pwm_lookup byt_pwm_lookup[] = {
 162         PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
 163                                "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
 164                                "pwm-lpss-platform"),
 165 };
 166
 167 static void byt_pwm_setup(struct lpss_private_data *pdata)
 168 {
 169         struct acpi_device *adev = pdata->adev;
 170
 171         /* Only call pwm_add_table for the first PWM controller */
 172         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 173                 return;
 174
 175         pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
 176 }
 177
 178 #define LPSS_I2C_ENABLE                 0x6c
 179
 180 static void byt_i2c_setup(struct lpss_private_data *pdata)
 181 {
 182         const char *uid_str = acpi_device_uid(pdata->adev);
 183         acpi_handle handle = pdata->adev->handle;
 184         unsigned long long shared_host = 0;
 185         acpi_status status;
 186         long uid = 0;
 187
 188         /* Expected to always be true, but better safe then sorry */
 189         if (uid_str && !kstrtol(uid_str, 10, &uid) && uid) {
 190                 /* Detect I2C bus shared with PUNIT and ignore its d3 status */
 191                 status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
 192                 if (ACPI_SUCCESS(status) && shared_host)
 193                         pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
 194         }
 195
 196         lpss_deassert_reset(pdata);
 197
 198         if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
 199                 pdata->fixed_clk_rate = 133000000;
 200
 201         writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
 202 }
 203
 204 /* BSW PWM used for backlight control by the i915 driver */
 205 static struct pwm_lookup bsw_pwm_lookup[] = {
 206         PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
 207                                "pwm_soc_backlight", 0, PWM_POLARITY_NORMAL,
 208                                "pwm-lpss-platform"),
 209 };
 210
 211 static void bsw_pwm_setup(struct lpss_private_data *pdata)
 212 {
 213         struct acpi_device *adev = pdata->adev;
 214
 215         /* Only call pwm_add_table for the first PWM controller */
 216         if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
 217                 return;
 218
 219         pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
 220 }
 221
 222 static const struct lpss_device_desc lpt_dev_desc = {
 223         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 224                         | LPSS_SAVE_CTX,
 225         .prv_offset = 0x800,
 226 };
 227
 228 static const struct lpss_device_desc lpt_i2c_dev_desc = {
 229         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR | LPSS_SAVE_CTX,
 230         .prv_offset = 0x800,
 231 };
 232
 233 static struct property_entry uart_properties[] = {
 234         PROPERTY_ENTRY_U32("reg-io-width", 4),
 235         PROPERTY_ENTRY_U32("reg-shift", 2),
 236         PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
 237         { },
 238 };
 239
 240 static const struct lpss_device_desc lpt_uart_dev_desc = {
 241         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR
 242                         | LPSS_SAVE_CTX,
 243         .clk_con_id = "baudclk",
 244         .prv_offset = 0x800,
 245         .setup = lpss_uart_setup,
 246         .properties = uart_properties,
 247 };
 248
 249 static const struct lpss_device_desc lpt_sdio_dev_desc = {
 250         .flags = LPSS_LTR,
 251         .prv_offset = 0x1000,
 252         .prv_size_override = 0x1018,
 253 };
 254
 255 static const struct lpss_device_desc byt_pwm_dev_desc = {
 256         .flags = LPSS_SAVE_CTX,
 257         .prv_offset = 0x800,
 258         .setup = byt_pwm_setup,
 259 };
 260
 261 static const struct lpss_device_desc bsw_pwm_dev_desc = {
 262         .flags = LPSS_SAVE_CTX_ONCE | LPSS_NO_D3_DELAY,
 263         .prv_offset = 0x800,
 264         .setup = bsw_pwm_setup,
 265         .resume_from_noirq = true,
 266 };
 267
 268 static const struct lpss_device_desc byt_uart_dev_desc = {
 269         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 270         .clk_con_id = "baudclk",
 271         .prv_offset = 0x800,
 272         .setup = lpss_uart_setup,
 273         .properties = uart_properties,
 274 };
 275
 276 static const struct lpss_device_desc bsw_uart_dev_desc = {
 277         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 278                         | LPSS_NO_D3_DELAY,
 279         .clk_con_id = "baudclk",
 280         .prv_offset = 0x800,
 281         .setup = lpss_uart_setup,
 282         .properties = uart_properties,
 283 };
 284
 285 static const struct lpss_device_desc byt_spi_dev_desc = {
 286         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
 287         .prv_offset = 0x400,
 288 };
 289
 290 static const struct lpss_device_desc byt_sdio_dev_desc = {
 291         .flags = LPSS_CLK,
 292 };
 293
 294 static const struct lpss_device_desc byt_i2c_dev_desc = {
 295         .flags = LPSS_CLK | LPSS_SAVE_CTX,
 296         .prv_offset = 0x800,
 297         .setup = byt_i2c_setup,
 298         .resume_from_noirq = true,
 299 };
 300
 301 static const struct lpss_device_desc bsw_i2c_dev_desc = {
 302         .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
 303         .prv_offset = 0x800,
 304         .setup = byt_i2c_setup,
 305         .resume_from_noirq = true,
 306 };
 307
 308 static const struct lpss_device_desc bsw_spi_dev_desc = {
 309         .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 310                         | LPSS_NO_D3_DELAY,
 311         .prv_offset = 0x400,
 312         .setup = lpss_deassert_reset,
 313 };
 314
 315 static const struct x86_cpu_id lpss_cpu_ids[] = {
 316         X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT,     NULL),
 317         X86_MATCH_INTEL_FAM6_MODEL(ATOM_AIRMONT,        NULL),
 318         {}
 319 };
 320
 321 #else
 322
 323 #define LPSS_ADDR(desc) (0UL)
 324
 325 #endif /* CONFIG_X86_INTEL_LPSS */
 326
 327 static const struct acpi_device_id acpi_lpss_device_ids[] = {
 328         /* Generic LPSS devices */
 329         { "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
 330
 331         /* Lynxpoint LPSS devices */
 332         { "INT33C0", LPSS_ADDR(lpt_dev_desc) },
 333         { "INT33C1", LPSS_ADDR(lpt_dev_desc) },
 334         { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
 335         { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
 336         { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
 337         { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
 338         { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
 339         { "INT33C7", },
 340
 341         /* BayTrail LPSS devices */
 342         { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
 343         { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
 344         { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
 345         { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
 346         { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
 347         { "INT33B2", },
 348         { "INT33FC", },
 349
 350         /* Braswell LPSS devices */
 351         { "80862286", LPSS_ADDR(lpss_dma_desc) },
 352         { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
 353         { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
 354         { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
 355         { "808622C0", LPSS_ADDR(lpss_dma_desc) },
 356         { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
 357
 358         /* Broadwell LPSS devices */
 359         { "INT3430", LPSS_ADDR(lpt_dev_desc) },
 360         { "INT3431", LPSS_ADDR(lpt_dev_desc) },
 361         { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
 362         { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
 363         { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
 364         { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
 365         { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
 366         { "INT3437", },
 367
 368         /* Wildcat Point LPSS devices */
 369         { "INT3438", LPSS_ADDR(lpt_dev_desc) },
 370
 371         { }
 372 };
 373
 374 #ifdef CONFIG_X86_INTEL_LPSS
 375
 376 static int is_memory(struct acpi_resource *res, void *not_used)
 377 {
 378         struct resource r;
 379
 380         return !acpi_dev_resource_memory(res, &r);
 381 }
 382
 383 /* LPSS main clock device. */
 384 static struct platform_device *lpss_clk_dev;
 385
 386 static inline void lpt_register_clock_device(void)
 387 {
 388         lpss_clk_dev = platform_device_register_simple("clk-lpss-atom",
 389                                                        PLATFORM_DEVID_NONE,
 390                                                        NULL, 0);
 391 }
 392
 393 static int register_device_clock(struct acpi_device *adev,
 394                                  struct lpss_private_data *pdata)
 395 {
 396         const struct lpss_device_desc *dev_desc = pdata->dev_desc;
 397         const char *devname = dev_name(&adev->dev);
 398         struct clk *clk;
 399         struct lpss_clk_data *clk_data;
 400         const char *parent, *clk_name;
 401         void __iomem *prv_base;
 402
 403         if (!lpss_clk_dev)
 404                 lpt_register_clock_device();
 405
 406         clk_data = platform_get_drvdata(lpss_clk_dev);
 407         if (!clk_data)
 408                 return -ENODEV;
 409         clk = clk_data->clk;
 410
 411         if (!pdata->mmio_base
 412             || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
 413                 return -ENODATA;
 414
 415         parent = clk_data->name;
 416         prv_base = pdata->mmio_base + dev_desc->prv_offset;
 417
 418         if (pdata->fixed_clk_rate) {
 419                 clk = clk_register_fixed_rate(NULL, devname, parent, 0,
 420                                               pdata->fixed_clk_rate);
 421                 goto out;
 422         }
 423
 424         if (dev_desc->flags & LPSS_CLK_GATE) {
 425                 clk = clk_register_gate(NULL, devname, parent, 0,
 426                                         prv_base, 0, 0, NULL);
 427                 parent = devname;
 428         }
 429
 430         if (dev_desc->flags & LPSS_CLK_DIVIDER) {
 431                 /* Prevent division by zero */
 432                 if (!readl(prv_base))
 433                         writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
 434
 435                 clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
 436                 if (!clk_name)
 437                         return -ENOMEM;
 438                 clk = clk_register_fractional_divider(NULL, clk_name, parent,
 439                                                       CLK_FRAC_DIVIDER_POWER_OF_TWO_PS,
 440                                                       prv_base, 1, 15, 16, 15, 0, NULL);
 441                 parent = clk_name;
 442
 443                 clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
 444                 if (!clk_name) {
 445                         kfree(parent);
 446                         return -ENOMEM;
 447                 }
 448                 clk = clk_register_gate(NULL, clk_name, parent,
 449                                         CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
 450                                         prv_base, 31, 0, NULL);
 451                 kfree(parent);
 452                 kfree(clk_name);
 453         }
 454 out:
 455         if (IS_ERR(clk))
 456                 return PTR_ERR(clk);
 457
 458         pdata->clk = clk;
 459         clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
 460         return 0;
 461 }
 462
 463 struct lpss_device_links {
 464         const char *supplier_hid;
 465         const char *supplier_uid;
 466         const char *consumer_hid;
 467         const char *consumer_uid;
 468         u32 flags;
 469         const struct dmi_system_id *dep_missing_ids;
 470 };
 471
 472 /* Please keep this list sorted alphabetically by vendor and model */
 473 static const struct dmi_system_id i2c1_dep_missing_dmi_ids[] = {
 474         {
 475                 .matches = {
 476                         DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 477                         DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
 478                 },
 479         },
 480         {}
 481 };
 482
 483 /*
 484  * The _DEP method is used to identify dependencies but instead of creating
 485  * device links for every handle in _DEP, only links in the following list are
 486  * created. That is necessary because, in the general case, _DEP can refer to
 487  * devices that might not have drivers, or that are on different buses, or where
 488  * the supplier is not enumerated until after the consumer is probed.
 489  */
 490 static const struct lpss_device_links lpss_device_links[] = {
 491         /* CHT External sdcard slot controller depends on PMIC I2C ctrl */
 492         {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
 493         /* CHT iGPU depends on PMIC I2C controller */
 494         {"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 495         /* BYT iGPU depends on the Embedded Controller I2C controller (UID 1) */
 496         {"80860F41", "1", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME,
 497          i2c1_dep_missing_dmi_ids},
 498         /* BYT CR iGPU depends on PMIC I2C controller (UID 5 on CR) */
 499         {"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 500         /* BYT iGPU depends on PMIC I2C controller (UID 7 on non CR) */
 501         {"80860F41", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
 502 };
 503
 504 static bool acpi_lpss_is_supplier(struct acpi_device *adev,
 505                                   const struct lpss_device_links *link)
 506 {
 507         return acpi_dev_hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
 508 }
 509
 510 static bool acpi_lpss_is_consumer(struct acpi_device *adev,
 511                                   const struct lpss_device_links *link)
 512 {
 513         return acpi_dev_hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
 514 }
 515
 516 struct hid_uid {
 517         const char *hid;
 518         const char *uid;
 519 };
 520
 521 static int match_hid_uid(struct device *dev, const void *data)
 522 {
 523         struct acpi_device *adev = ACPI_COMPANION(dev);
 524         const struct hid_uid *id = data;
 525
 526         if (!adev)
 527                 return 0;
 528
 529         return acpi_dev_hid_uid_match(adev, id->hid, id->uid);
 530 }
 531
 532 static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
 533 {
 534         struct device *dev;
 535
 536         struct hid_uid data = {
 537                 .hid = hid,
 538                 .uid = uid,
 539         };
 540
 541         dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
 542         if (dev)
 543                 return dev;
 544
 545         return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
 546 }
 547
 548 static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
 549 {
 550         struct acpi_handle_list dep_devices;
 551         acpi_status status;
 552         int i;
 553
 554         if (!acpi_has_method(adev->handle, "_DEP"))
 555                 return false;
 556
 557         status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
 558                                          &dep_devices);
 559         if (ACPI_FAILURE(status)) {
 560                 dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
 561                 return false;
 562         }
 563
 564         for (i = 0; i < dep_devices.count; i++) {
 565                 if (dep_devices.handles[i] == handle)
 566                         return true;
 567         }
 568
 569         return false;
 570 }
 571
 572 static void acpi_lpss_link_consumer(struct device *dev1,
 573                                     const struct lpss_device_links *link)
 574 {
 575         struct device *dev2;
 576
 577         dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
 578         if (!dev2)
 579                 return;
 580
 581         if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
 582             || acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
 583                 device_link_add(dev2, dev1, link->flags);
 584
 585         put_device(dev2);
 586 }
 587
 588 static void acpi_lpss_link_supplier(struct device *dev1,
 589                                     const struct lpss_device_links *link)
 590 {
 591         struct device *dev2;
 592
 593         dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
 594         if (!dev2)
 595                 return;
 596
 597         if ((link->dep_missing_ids && dmi_check_system(link->dep_missing_ids))
 598             || acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
 599                 device_link_add(dev1, dev2, link->flags);
 600
 601         put_device(dev2);
 602 }
 603
 604 static void acpi_lpss_create_device_links(struct acpi_device *adev,
 605                                           struct platform_device *pdev)
 606 {
 607         int i;
 608
 609         for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
 610                 const struct lpss_device_links *link = &lpss_device_links[i];
 611
 612                 if (acpi_lpss_is_supplier(adev, link))
 613                         acpi_lpss_link_consumer(&pdev->dev, link);
 614
 615                 if (acpi_lpss_is_consumer(adev, link))
 616                         acpi_lpss_link_supplier(&pdev->dev, link);
 617         }
 618 }
 619
 620 static int acpi_lpss_create_device(struct acpi_device *adev,
 621                                    const struct acpi_device_id *id)
 622 {
 623         const struct lpss_device_desc *dev_desc;
 624         struct lpss_private_data *pdata;
 625         struct resource_entry *rentry;
 626         struct list_head resource_list;
 627         struct platform_device *pdev;
 628         int ret;
 629
 630         dev_desc = (const struct lpss_device_desc *)id->driver_data;
 631         if (!dev_desc) {
 632                 pdev = acpi_create_platform_device(adev, NULL);
 633                 return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
 634         }
 635         pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
 636         if (!pdata)
 637                 return -ENOMEM;
 638
 639         INIT_LIST_HEAD(&resource_list);
 640         ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
 641         if (ret < 0)
 642                 goto err_out;
 643
 644         list_for_each_entry(rentry, &resource_list, node)
 645                 if (resource_type(rentry->res) == IORESOURCE_MEM) {
 646                         if (dev_desc->prv_size_override)
 647                                 pdata->mmio_size = dev_desc->prv_size_override;
 648                         else
 649                                 pdata->mmio_size = resource_size(rentry->res);
 650                         pdata->mmio_base = ioremap(rentry->res->start,
 651                                                    pdata->mmio_size);
 652                         break;
 653                 }
 654
 655         acpi_dev_free_resource_list(&resource_list);
 656
 657         if (!pdata->mmio_base) {
 658                 /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
 659                 adev->pnp.type.platform_id = 0;
 660                 /* Skip the device, but continue the namespace scan. */
 661                 ret = 0;
 662                 goto err_out;
 663         }
 664
 665         pdata->adev = adev;
 666         pdata->dev_desc = dev_desc;
 667
 668         if (dev_desc->setup)
 669                 dev_desc->setup(pdata);
 670
 671         if (dev_desc->flags & LPSS_CLK) {
 672                 ret = register_device_clock(adev, pdata);
 673                 if (ret) {
 674                         /* Skip the device, but continue the namespace scan. */
 675                         ret = 0;
 676                         goto err_out;
 677                 }
 678         }
 679
 680         /*
 681          * This works around a known issue in ACPI tables where LPSS devices
 682          * have _PS0 and _PS3 without _PSC (and no power resources), so
 683          * acpi_bus_init_power() will assume that the BIOS has put them into D0.
 684          */
 685         acpi_device_fix_up_power(adev);
 686
 687         adev->driver_data = pdata;
 688         pdev = acpi_create_platform_device(adev, dev_desc->properties);
 689         if (!IS_ERR_OR_NULL(pdev)) {
 690                 acpi_lpss_create_device_links(adev, pdev);
 691                 return 1;
 692         }
 693
 694         ret = PTR_ERR(pdev);
 695         adev->driver_data = NULL;
 696
 697  err_out:
 698         kfree(pdata);
 699         return ret;
 700 }
 701
 702 static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
 703 {
 704         return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 705 }
 706
 707 static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
 708                              unsigned int reg)
 709 {
 710         writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
 711 }
 712
 713 static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
 714 {
 715         struct acpi_device *adev;
 716         struct lpss_private_data *pdata;
 717         unsigned long flags;
 718         int ret;
 719
 720         ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
 721         if (WARN_ON(ret))
 722                 return ret;
 723
 724         spin_lock_irqsave(&dev->power.lock, flags);
 725         if (pm_runtime_suspended(dev)) {
 726                 ret = -EAGAIN;
 727                 goto out;
 728         }
 729         pdata = acpi_driver_data(adev);
 730         if (WARN_ON(!pdata || !pdata->mmio_base)) {
 731                 ret = -ENODEV;
 732                 goto out;
 733         }
 734         *val = __lpss_reg_read(pdata, reg);
 735
 736  out:
 737         spin_unlock_irqrestore(&dev->power.lock, flags);
 738         return ret;
 739 }
 740
 741 static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
 742                              char *buf)
 743 {
 744         u32 ltr_value = 0;
 745         unsigned int reg;
 746         int ret;
 747
 748         reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
 749         ret = lpss_reg_read(dev, reg, &ltr_value);
 750         if (ret)
 751                 return ret;
 752
 753         return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
 754 }
 755
 756 static ssize_t lpss_ltr_mode_show(struct device *dev,
 757                                   struct device_attribute *attr, char *buf)
 758 {
 759         u32 ltr_mode = 0;
 760         char *outstr;
 761         int ret;
 762
 763         ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
 764         if (ret)
 765                 return ret;
 766
 767         outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
 768         return sprintf(buf, "%s\n", outstr);
 769 }
 770
 771 static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
 772 static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
 773 static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
 774
 775 static struct attribute *lpss_attrs[] = {
 776         &dev_attr_auto_ltr.attr,
 777         &dev_attr_sw_ltr.attr,
 778         &dev_attr_ltr_mode.attr,
 779         NULL,
 780 };
 781
 782 static const struct attribute_group lpss_attr_group = {
 783         .attrs = lpss_attrs,
 784         .name = "lpss_ltr",
 785 };
 786
 787 static void acpi_lpss_set_ltr(struct device *dev, s32 val)
 788 {
 789         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 790         u32 ltr_mode, ltr_val;
 791
 792         ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
 793         if (val < 0) {
 794                 if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
 795                         ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
 796                         __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 797                 }
 798                 return;
 799         }
 800         ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
 801         if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
 802                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
 803                 val = LPSS_LTR_MAX_VAL;
 804         } else if (val > LPSS_LTR_MAX_VAL) {
 805                 ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
 806                 val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
 807         } else {
 808                 ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
 809         }
 810         ltr_val |= val;
 811         __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
 812         if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
 813                 ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
 814                 __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
 815         }
 816 }
 817
 818 #ifdef CONFIG_PM
 819 /**
 820  * acpi_lpss_save_ctx() - Save the private registers of LPSS device
 821  * @dev: LPSS device
 822  * @pdata: pointer to the private data of the LPSS device
 823  *
 824  * Most LPSS devices have private registers which may loose their context when
 825  * the device is powered down. acpi_lpss_save_ctx() saves those registers into
 826  * prv_reg_ctx array.
 827  */
 828 static void acpi_lpss_save_ctx(struct device *dev,
 829                                struct lpss_private_data *pdata)
 830 {
 831         unsigned int i;
 832
 833         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 834                 unsigned long offset = i * sizeof(u32);
 835
 836                 pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
 837                 dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
 838                         pdata->prv_reg_ctx[i], offset);
 839         }
 840 }
 841
 842 /**
 843  * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
 844  * @dev: LPSS device
 845  * @pdata: pointer to the private data of the LPSS device
 846  *
 847  * Restores the registers that were previously stored with acpi_lpss_save_ctx().
 848  */
 849 static void acpi_lpss_restore_ctx(struct device *dev,
 850                                   struct lpss_private_data *pdata)
 851 {
 852         unsigned int i;
 853
 854         for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
 855                 unsigned long offset = i * sizeof(u32);
 856
 857                 __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
 858                 dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
 859                         pdata->prv_reg_ctx[i], offset);
 860         }
 861 }
 862
 863 static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
 864 {
 865         /*
 866          * The following delay is needed or the subsequent write operations may
 867          * fail. The LPSS devices are actually PCI devices and the PCI spec
 868          * expects 10ms delay before the device can be accessed after D3 to D0
 869          * transition. However some platforms like BSW does not need this delay.
 870          */
 871         unsigned int delay = 10;        /* default 10ms delay */
 872
 873         if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
 874                 delay = 0;
 875
 876         msleep(delay);
 877 }
 878
 879 static int acpi_lpss_activate(struct device *dev)
 880 {
 881         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 882         int ret;
 883
 884         ret = acpi_dev_resume(dev);
 885         if (ret)
 886                 return ret;
 887
 888         acpi_lpss_d3_to_d0_delay(pdata);
 889
 890         /*
 891          * This is called only on ->probe() stage where a device is either in
 892          * known state defined by BIOS or most likely powered off. Due to this
 893          * we have to deassert reset line to be sure that ->probe() will
 894          * recognize the device.
 895          */
 896         if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
 897                 lpss_deassert_reset(pdata);
 898
 899 #ifdef CONFIG_PM
 900         if (pdata->dev_desc->flags & LPSS_SAVE_CTX_ONCE)
 901                 acpi_lpss_save_ctx(dev, pdata);
 902 #endif
 903
 904         return 0;
 905 }
 906
 907 static void acpi_lpss_dismiss(struct device *dev)
 908 {
 909         acpi_dev_suspend(dev, false);
 910 }
 911
 912 /* IOSF SB for LPSS island */
 913 #define LPSS_IOSF_UNIT_LPIOEP           0xA0
 914 #define LPSS_IOSF_UNIT_LPIO1            0xAB
 915 #define LPSS_IOSF_UNIT_LPIO2            0xAC
 916
 917 #define LPSS_IOSF_PMCSR                 0x84
 918 #define LPSS_PMCSR_D0                   0
 919 #define LPSS_PMCSR_D3hot                3
 920 #define LPSS_PMCSR_Dx_MASK              GENMASK(1, 0)
 921
 922 #define LPSS_IOSF_GPIODEF0              0x154
 923 #define LPSS_GPIODEF0_DMA1_D3           BIT(2)
 924 #define LPSS_GPIODEF0_DMA2_D3           BIT(3)
 925 #define LPSS_GPIODEF0_DMA_D3_MASK       GENMASK(3, 2)
 926 #define LPSS_GPIODEF0_DMA_LLP           BIT(13)
 927
 928 static DEFINE_MUTEX(lpss_iosf_mutex);
 929 static bool lpss_iosf_d3_entered = true;
 930
 931 static void lpss_iosf_enter_d3_state(void)
 932 {
 933         u32 value1 = 0;
 934         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 935         u32 value2 = LPSS_PMCSR_D3hot;
 936         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 937         /*
 938          * PMC provides an information about actual status of the LPSS devices.
 939          * Here we read the values related to LPSS power island, i.e. LPSS
 940          * devices, excluding both LPSS DMA controllers, along with SCC domain.
 941          */
 942         u32 func_dis, d3_sts_0, pmc_status;
 943         int ret;
 944
 945         ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
 946         if (ret)
 947                 return;
 948
 949         mutex_lock(&lpss_iosf_mutex);
 950
 951         ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
 952         if (ret)
 953                 goto exit;
 954
 955         /*
 956          * Get the status of entire LPSS power island per device basis.
 957          * Shutdown both LPSS DMA controllers if and only if all other devices
 958          * are already in D3hot.
 959          */
 960         pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
 961         if (pmc_status)
 962                 goto exit;
 963
 964         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
 965                         LPSS_IOSF_PMCSR, value2, mask2);
 966
 967         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 968                         LPSS_IOSF_PMCSR, value2, mask2);
 969
 970         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 971                         LPSS_IOSF_GPIODEF0, value1, mask1);
 972
 973         lpss_iosf_d3_entered = true;
 974
 975 exit:
 976         mutex_unlock(&lpss_iosf_mutex);
 977 }
 978
 979 static void lpss_iosf_exit_d3_state(void)
 980 {
 981         u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
 982                      LPSS_GPIODEF0_DMA_LLP;
 983         u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
 984         u32 value2 = LPSS_PMCSR_D0;
 985         u32 mask2 = LPSS_PMCSR_Dx_MASK;
 986
 987         mutex_lock(&lpss_iosf_mutex);
 988
 989         if (!lpss_iosf_d3_entered)
 990                 goto exit;
 991
 992         lpss_iosf_d3_entered = false;
 993
 994         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
 995                         LPSS_IOSF_GPIODEF0, value1, mask1);
 996
 997         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
 998                         LPSS_IOSF_PMCSR, value2, mask2);
 999
1000         iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
1001                         LPSS_IOSF_PMCSR, value2, mask2);
1002
1003 exit:
1004         mutex_unlock(&lpss_iosf_mutex);
1005 }
1006
1007 static int acpi_lpss_suspend(struct device *dev, bool wakeup)
1008 {
1009         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1010         int ret;
1011
1012         if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
1013                 acpi_lpss_save_ctx(dev, pdata);
1014
1015         ret = acpi_dev_suspend(dev, wakeup);
1016
1017         /*
1018          * This call must be last in the sequence, otherwise PMC will return
1019          * wrong status for devices being about to be powered off. See
1020          * lpss_iosf_enter_d3_state() for further information.
1021          */
1022         if (acpi_target_system_state() == ACPI_STATE_S0 &&
1023             lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1024                 lpss_iosf_enter_d3_state();
1025
1026         return ret;
1027 }
1028
1029 static int acpi_lpss_resume(struct device *dev)
1030 {
1031         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1032         int ret;
1033
1034         /*
1035          * This call is kept first to be in symmetry with
1036          * acpi_lpss_runtime_suspend() one.
1037          */
1038         if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
1039                 lpss_iosf_exit_d3_state();
1040
1041         ret = acpi_dev_resume(dev);
1042         if (ret)
1043                 return ret;
1044
1045         acpi_lpss_d3_to_d0_delay(pdata);
1046
1047         if (pdata->dev_desc->flags & (LPSS_SAVE_CTX | LPSS_SAVE_CTX_ONCE))
1048                 acpi_lpss_restore_ctx(dev, pdata);
1049
1050         return 0;
1051 }
1052
1053 #ifdef CONFIG_PM_SLEEP
1054 static int acpi_lpss_do_suspend_late(struct device *dev)
1055 {
1056         int ret;
1057
1058         if (dev_pm_skip_suspend(dev))
1059                 return 0;
1060
1061         ret = pm_generic_suspend_late(dev);
1062         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1063 }
1064
1065 static int acpi_lpss_suspend_late(struct device *dev)
1066 {
1067         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1068
1069         if (pdata->dev_desc->resume_from_noirq)
1070                 return 0;
1071
1072         return acpi_lpss_do_suspend_late(dev);
1073 }
1074
1075 static int acpi_lpss_suspend_noirq(struct device *dev)
1076 {
1077         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1078         int ret;
1079
1080         if (pdata->dev_desc->resume_from_noirq) {
1081                 /*
1082                  * The driver's ->suspend_late callback will be invoked by
1083                  * acpi_lpss_do_suspend_late(), with the assumption that the
1084                  * driver really wanted to run that code in ->suspend_noirq, but
1085                  * it could not run after acpi_dev_suspend() and the driver
1086                  * expected the latter to be called in the "late" phase.
1087                  */
1088                 ret = acpi_lpss_do_suspend_late(dev);
1089                 if (ret)
1090                         return ret;
1091         }
1092
1093         return acpi_subsys_suspend_noirq(dev);
1094 }
1095
1096 static int acpi_lpss_do_resume_early(struct device *dev)
1097 {
1098         int ret = acpi_lpss_resume(dev);
1099
1100         return ret ? ret : pm_generic_resume_early(dev);
1101 }
1102
1103 static int acpi_lpss_resume_early(struct device *dev)
1104 {
1105         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1106
1107         if (pdata->dev_desc->resume_from_noirq)
1108                 return 0;
1109
1110         if (dev_pm_skip_resume(dev))
1111                 return 0;
1112
1113         return acpi_lpss_do_resume_early(dev);
1114 }
1115
1116 static int acpi_lpss_resume_noirq(struct device *dev)
1117 {
1118         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1119         int ret;
1120
1121         /* Follow acpi_subsys_resume_noirq(). */
1122         if (dev_pm_skip_resume(dev))
1123                 return 0;
1124
1125         ret = pm_generic_resume_noirq(dev);
1126         if (ret)
1127                 return ret;
1128
1129         if (!pdata->dev_desc->resume_from_noirq)
1130                 return 0;
1131
1132         /*
1133          * The driver's ->resume_early callback will be invoked by
1134          * acpi_lpss_do_resume_early(), with the assumption that the driver
1135          * really wanted to run that code in ->resume_noirq, but it could not
1136          * run before acpi_dev_resume() and the driver expected the latter to be
1137          * called in the "early" phase.
1138          */
1139         return acpi_lpss_do_resume_early(dev);
1140 }
1141
1142 static int acpi_lpss_do_restore_early(struct device *dev)
1143 {
1144         int ret = acpi_lpss_resume(dev);
1145
1146         return ret ? ret : pm_generic_restore_early(dev);
1147 }
1148
1149 static int acpi_lpss_restore_early(struct device *dev)
1150 {
1151         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1152
1153         if (pdata->dev_desc->resume_from_noirq)
1154                 return 0;
1155
1156         return acpi_lpss_do_restore_early(dev);
1157 }
1158
1159 static int acpi_lpss_restore_noirq(struct device *dev)
1160 {
1161         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1162         int ret;
1163
1164         ret = pm_generic_restore_noirq(dev);
1165         if (ret)
1166                 return ret;
1167
1168         if (!pdata->dev_desc->resume_from_noirq)
1169                 return 0;
1170
1171         /* This is analogous to what happens in acpi_lpss_resume_noirq(). */
1172         return acpi_lpss_do_restore_early(dev);
1173 }
1174
1175 static int acpi_lpss_do_poweroff_late(struct device *dev)
1176 {
1177         int ret = pm_generic_poweroff_late(dev);
1178
1179         return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
1180 }
1181
1182 static int acpi_lpss_poweroff_late(struct device *dev)
1183 {
1184         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1185
1186         if (dev_pm_skip_suspend(dev))
1187                 return 0;
1188
1189         if (pdata->dev_desc->resume_from_noirq)
1190                 return 0;
1191
1192         return acpi_lpss_do_poweroff_late(dev);
1193 }
1194
1195 static int acpi_lpss_poweroff_noirq(struct device *dev)
1196 {
1197         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1198
1199         if (dev_pm_skip_suspend(dev))
1200                 return 0;
1201
1202         if (pdata->dev_desc->resume_from_noirq) {
1203                 /* This is analogous to the acpi_lpss_suspend_noirq() case. */
1204                 int ret = acpi_lpss_do_poweroff_late(dev);
1205
1206                 if (ret)
1207                         return ret;
1208         }
1209
1210         return pm_generic_poweroff_noirq(dev);
1211 }
1212 #endif /* CONFIG_PM_SLEEP */
1213
1214 static int acpi_lpss_runtime_suspend(struct device *dev)
1215 {
1216         int ret = pm_generic_runtime_suspend(dev);
1217
1218         return ret ? ret : acpi_lpss_suspend(dev, true);
1219 }
1220
1221 static int acpi_lpss_runtime_resume(struct device *dev)
1222 {
1223         int ret = acpi_lpss_resume(dev);
1224
1225         return ret ? ret : pm_generic_runtime_resume(dev);
1226 }
1227 #endif /* CONFIG_PM */
1228
1229 static struct dev_pm_domain acpi_lpss_pm_domain = {
1230 #ifdef CONFIG_PM
1231         .activate = acpi_lpss_activate,
1232         .dismiss = acpi_lpss_dismiss,
1233 #endif
1234         .ops = {
1235 #ifdef CONFIG_PM
1236 #ifdef CONFIG_PM_SLEEP
1237                 .prepare = acpi_subsys_prepare,
1238                 .complete = acpi_subsys_complete,
1239                 .suspend = acpi_subsys_suspend,
1240                 .suspend_late = acpi_lpss_suspend_late,
1241                 .suspend_noirq = acpi_lpss_suspend_noirq,
1242                 .resume_noirq = acpi_lpss_resume_noirq,
1243                 .resume_early = acpi_lpss_resume_early,
1244                 .freeze = acpi_subsys_freeze,
1245                 .poweroff = acpi_subsys_poweroff,
1246                 .poweroff_late = acpi_lpss_poweroff_late,
1247                 .poweroff_noirq = acpi_lpss_poweroff_noirq,
1248                 .restore_noirq = acpi_lpss_restore_noirq,
1249                 .restore_early = acpi_lpss_restore_early,
1250 #endif
1251                 .runtime_suspend = acpi_lpss_runtime_suspend,
1252                 .runtime_resume = acpi_lpss_runtime_resume,
1253 #endif
1254         },
1255 };
1256
1257 static int acpi_lpss_platform_notify(struct notifier_block *nb,
1258                                      unsigned long action, void *data)
1259 {
1260         struct platform_device *pdev = to_platform_device(data);
1261         struct lpss_private_data *pdata;
1262         struct acpi_device *adev;
1263         const struct acpi_device_id *id;
1264
1265         id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
1266         if (!id || !id->driver_data)
1267                 return 0;
1268
1269         if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
1270                 return 0;
1271
1272         pdata = acpi_driver_data(adev);
1273         if (!pdata)
1274                 return 0;
1275
1276         if (pdata->mmio_base &&
1277             pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
1278                 dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
1279                 return 0;
1280         }
1281
1282         switch (action) {
1283         case BUS_NOTIFY_BIND_DRIVER:
1284                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1285                 break;
1286         case BUS_NOTIFY_DRIVER_NOT_BOUND:
1287         case BUS_NOTIFY_UNBOUND_DRIVER:
1288                 dev_pm_domain_set(&pdev->dev, NULL);
1289                 break;
1290         case BUS_NOTIFY_ADD_DEVICE:
1291                 dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
1292                 if (pdata->dev_desc->flags & LPSS_LTR)
1293                         return sysfs_create_group(&pdev->dev.kobj,
1294                                                   &lpss_attr_group);
1295                 break;
1296         case BUS_NOTIFY_DEL_DEVICE:
1297                 if (pdata->dev_desc->flags & LPSS_LTR)
1298                         sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
1299                 dev_pm_domain_set(&pdev->dev, NULL);
1300                 break;
1301         default:
1302                 break;
1303         }
1304
1305         return 0;
1306 }
1307
1308 static struct notifier_block acpi_lpss_nb = {
1309         .notifier_call = acpi_lpss_platform_notify,
1310 };
1311
1312 static void acpi_lpss_bind(struct device *dev)
1313 {
1314         struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
1315
1316         if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
1317                 return;
1318
1319         if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
1320                 dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
1321         else
1322                 dev_err(dev, "MMIO size insufficient to access LTR\n");
1323 }
1324
1325 static void acpi_lpss_unbind(struct device *dev)
1326 {
1327         dev->power.set_latency_tolerance = NULL;
1328 }
1329
1330 static struct acpi_scan_handler lpss_handler = {
1331         .ids = acpi_lpss_device_ids,
1332         .attach = acpi_lpss_create_device,
1333         .bind = acpi_lpss_bind,
1334         .unbind = acpi_lpss_unbind,
1335 };
1336
1337 void __init acpi_lpss_init(void)
1338 {
1339         const struct x86_cpu_id *id;
1340         int ret;
1341
1342         ret = lpss_atom_clk_init();
1343         if (ret)
1344                 return;
1345
1346         id = x86_match_cpu(lpss_cpu_ids);
1347         if (id)
1348                 lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
1349
1350         bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
1351         acpi_scan_add_handler(&lpss_handler);
1352 }
1353
1354 #else
1355
1356 static struct acpi_scan_handler lpss_handler = {
1357         .ids = acpi_lpss_device_ids,
1358 };
1359
1360 void __init acpi_lpss_init(void)
1361 {
1362         acpi_scan_add_handler(&lpss_handler);
1363 }
1364
1365 #endif /* CONFIG_X86_INTEL_LPSS */