Merge tag 'asoc-fix-v4.15-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git...
[linux-2.6-microblaze.git] / arch / x86 / include / asm / tlbflush.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_TLBFLUSH_H
3 #define _ASM_X86_TLBFLUSH_H
4
5 #include <linux/mm.h>
6 #include <linux/sched.h>
7
8 #include <asm/processor.h>
9 #include <asm/cpufeature.h>
10 #include <asm/special_insns.h>
11 #include <asm/smp.h>
12
13 static inline void __invpcid(unsigned long pcid, unsigned long addr,
14                              unsigned long type)
15 {
16         struct { u64 d[2]; } desc = { { pcid, addr } };
17
18         /*
19          * The memory clobber is because the whole point is to invalidate
20          * stale TLB entries and, especially if we're flushing global
21          * mappings, we don't want the compiler to reorder any subsequent
22          * memory accesses before the TLB flush.
23          *
24          * The hex opcode is invpcid (%ecx), %eax in 32-bit mode and
25          * invpcid (%rcx), %rax in long mode.
26          */
27         asm volatile (".byte 0x66, 0x0f, 0x38, 0x82, 0x01"
28                       : : "m" (desc), "a" (type), "c" (&desc) : "memory");
29 }
30
31 #define INVPCID_TYPE_INDIV_ADDR         0
32 #define INVPCID_TYPE_SINGLE_CTXT        1
33 #define INVPCID_TYPE_ALL_INCL_GLOBAL    2
34 #define INVPCID_TYPE_ALL_NON_GLOBAL     3
35
36 /* Flush all mappings for a given pcid and addr, not including globals. */
37 static inline void invpcid_flush_one(unsigned long pcid,
38                                      unsigned long addr)
39 {
40         __invpcid(pcid, addr, INVPCID_TYPE_INDIV_ADDR);
41 }
42
43 /* Flush all mappings for a given PCID, not including globals. */
44 static inline void invpcid_flush_single_context(unsigned long pcid)
45 {
46         __invpcid(pcid, 0, INVPCID_TYPE_SINGLE_CTXT);
47 }
48
49 /* Flush all mappings, including globals, for all PCIDs. */
50 static inline void invpcid_flush_all(void)
51 {
52         __invpcid(0, 0, INVPCID_TYPE_ALL_INCL_GLOBAL);
53 }
54
55 /* Flush all mappings for all PCIDs except globals. */
56 static inline void invpcid_flush_all_nonglobals(void)
57 {
58         __invpcid(0, 0, INVPCID_TYPE_ALL_NON_GLOBAL);
59 }
60
61 static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
62 {
63         u64 new_tlb_gen;
64
65         /*
66          * Bump the generation count.  This also serves as a full barrier
67          * that synchronizes with switch_mm(): callers are required to order
68          * their read of mm_cpumask after their writes to the paging
69          * structures.
70          */
71         smp_mb__before_atomic();
72         new_tlb_gen = atomic64_inc_return(&mm->context.tlb_gen);
73         smp_mb__after_atomic();
74
75         return new_tlb_gen;
76 }
77
78 #ifdef CONFIG_PARAVIRT
79 #include <asm/paravirt.h>
80 #else
81 #define __flush_tlb() __native_flush_tlb()
82 #define __flush_tlb_global() __native_flush_tlb_global()
83 #define __flush_tlb_single(addr) __native_flush_tlb_single(addr)
84 #endif
85
86 static inline bool tlb_defer_switch_to_init_mm(void)
87 {
88         /*
89          * If we have PCID, then switching to init_mm is reasonably
90          * fast.  If we don't have PCID, then switching to init_mm is
91          * quite slow, so we try to defer it in the hopes that we can
92          * avoid it entirely.  The latter approach runs the risk of
93          * receiving otherwise unnecessary IPIs.
94          *
95          * This choice is just a heuristic.  The tlb code can handle this
96          * function returning true or false regardless of whether we have
97          * PCID.
98          */
99         return !static_cpu_has(X86_FEATURE_PCID);
100 }
101
102 /*
103  * 6 because 6 should be plenty and struct tlb_state will fit in
104  * two cache lines.
105  */
106 #define TLB_NR_DYN_ASIDS 6
107
108 struct tlb_context {
109         u64 ctx_id;
110         u64 tlb_gen;
111 };
112
113 struct tlb_state {
114         /*
115          * cpu_tlbstate.loaded_mm should match CR3 whenever interrupts
116          * are on.  This means that it may not match current->active_mm,
117          * which will contain the previous user mm when we're in lazy TLB
118          * mode even if we've already switched back to swapper_pg_dir.
119          */
120         struct mm_struct *loaded_mm;
121         u16 loaded_mm_asid;
122         u16 next_asid;
123
124         /*
125          * We can be in one of several states:
126          *
127          *  - Actively using an mm.  Our CPU's bit will be set in
128          *    mm_cpumask(loaded_mm) and is_lazy == false;
129          *
130          *  - Not using a real mm.  loaded_mm == &init_mm.  Our CPU's bit
131          *    will not be set in mm_cpumask(&init_mm) and is_lazy == false.
132          *
133          *  - Lazily using a real mm.  loaded_mm != &init_mm, our bit
134          *    is set in mm_cpumask(loaded_mm), but is_lazy == true.
135          *    We're heuristically guessing that the CR3 load we
136          *    skipped more than makes up for the overhead added by
137          *    lazy mode.
138          */
139         bool is_lazy;
140
141         /*
142          * Access to this CR4 shadow and to H/W CR4 is protected by
143          * disabling interrupts when modifying either one.
144          */
145         unsigned long cr4;
146
147         /*
148          * This is a list of all contexts that might exist in the TLB.
149          * There is one per ASID that we use, and the ASID (what the
150          * CPU calls PCID) is the index into ctxts.
151          *
152          * For each context, ctx_id indicates which mm the TLB's user
153          * entries came from.  As an invariant, the TLB will never
154          * contain entries that are out-of-date as when that mm reached
155          * the tlb_gen in the list.
156          *
157          * To be clear, this means that it's legal for the TLB code to
158          * flush the TLB without updating tlb_gen.  This can happen
159          * (for now, at least) due to paravirt remote flushes.
160          *
161          * NB: context 0 is a bit special, since it's also used by
162          * various bits of init code.  This is fine -- code that
163          * isn't aware of PCID will end up harmlessly flushing
164          * context 0.
165          */
166         struct tlb_context ctxs[TLB_NR_DYN_ASIDS];
167 };
168 DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
169
170 /* Initialize cr4 shadow for this CPU. */
171 static inline void cr4_init_shadow(void)
172 {
173         this_cpu_write(cpu_tlbstate.cr4, __read_cr4());
174 }
175
176 static inline void __cr4_set(unsigned long cr4)
177 {
178         lockdep_assert_irqs_disabled();
179         this_cpu_write(cpu_tlbstate.cr4, cr4);
180         __write_cr4(cr4);
181 }
182
183 /* Set in this cpu's CR4. */
184 static inline void cr4_set_bits(unsigned long mask)
185 {
186         unsigned long cr4, flags;
187
188         local_irq_save(flags);
189         cr4 = this_cpu_read(cpu_tlbstate.cr4);
190         if ((cr4 | mask) != cr4)
191                 __cr4_set(cr4 | mask);
192         local_irq_restore(flags);
193 }
194
195 /* Clear in this cpu's CR4. */
196 static inline void cr4_clear_bits(unsigned long mask)
197 {
198         unsigned long cr4, flags;
199
200         local_irq_save(flags);
201         cr4 = this_cpu_read(cpu_tlbstate.cr4);
202         if ((cr4 & ~mask) != cr4)
203                 __cr4_set(cr4 & ~mask);
204         local_irq_restore(flags);
205 }
206
207 static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
208 {
209         unsigned long cr4;
210
211         cr4 = this_cpu_read(cpu_tlbstate.cr4);
212         __cr4_set(cr4 ^ mask);
213 }
214
215 /* Read the CR4 shadow. */
216 static inline unsigned long cr4_read_shadow(void)
217 {
218         return this_cpu_read(cpu_tlbstate.cr4);
219 }
220
221 /*
222  * Save some of cr4 feature set we're using (e.g.  Pentium 4MB
223  * enable and PPro Global page enable), so that any CPU's that boot
224  * up after us can get the correct flags.  This should only be used
225  * during boot on the boot cpu.
226  */
227 extern unsigned long mmu_cr4_features;
228 extern u32 *trampoline_cr4_features;
229
230 static inline void cr4_set_bits_and_update_boot(unsigned long mask)
231 {
232         mmu_cr4_features |= mask;
233         if (trampoline_cr4_features)
234                 *trampoline_cr4_features = mmu_cr4_features;
235         cr4_set_bits(mask);
236 }
237
238 extern void initialize_tlbstate_and_flush(void);
239
240 static inline void __native_flush_tlb(void)
241 {
242         /*
243          * If current->mm == NULL then we borrow a mm which may change during a
244          * task switch and therefore we must not be preempted while we write CR3
245          * back:
246          */
247         preempt_disable();
248         native_write_cr3(__native_read_cr3());
249         preempt_enable();
250 }
251
252 static inline void __native_flush_tlb_global_irq_disabled(void)
253 {
254         unsigned long cr4;
255
256         cr4 = this_cpu_read(cpu_tlbstate.cr4);
257         /* clear PGE */
258         native_write_cr4(cr4 & ~X86_CR4_PGE);
259         /* write old PGE again and flush TLBs */
260         native_write_cr4(cr4);
261 }
262
263 static inline void __native_flush_tlb_global(void)
264 {
265         unsigned long flags;
266
267         if (static_cpu_has(X86_FEATURE_INVPCID)) {
268                 /*
269                  * Using INVPCID is considerably faster than a pair of writes
270                  * to CR4 sandwiched inside an IRQ flag save/restore.
271                  */
272                 invpcid_flush_all();
273                 return;
274         }
275
276         /*
277          * Read-modify-write to CR4 - protect it from preemption and
278          * from interrupts. (Use the raw variant because this code can
279          * be called from deep inside debugging code.)
280          */
281         raw_local_irq_save(flags);
282
283         __native_flush_tlb_global_irq_disabled();
284
285         raw_local_irq_restore(flags);
286 }
287
288 static inline void __native_flush_tlb_single(unsigned long addr)
289 {
290         asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
291 }
292
293 static inline void __flush_tlb_all(void)
294 {
295         if (boot_cpu_has(X86_FEATURE_PGE))
296                 __flush_tlb_global();
297         else
298                 __flush_tlb();
299
300         /*
301          * Note: if we somehow had PCID but not PGE, then this wouldn't work --
302          * we'd end up flushing kernel translations for the current ASID but
303          * we might fail to flush kernel translations for other cached ASIDs.
304          *
305          * To avoid this issue, we force PCID off if PGE is off.
306          */
307 }
308
309 static inline void __flush_tlb_one(unsigned long addr)
310 {
311         count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
312         __flush_tlb_single(addr);
313 }
314
315 #define TLB_FLUSH_ALL   -1UL
316
317 /*
318  * TLB flushing:
319  *
320  *  - flush_tlb_all() flushes all processes TLBs
321  *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
322  *  - flush_tlb_page(vma, vmaddr) flushes one page
323  *  - flush_tlb_range(vma, start, end) flushes a range of pages
324  *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
325  *  - flush_tlb_others(cpumask, info) flushes TLBs on other cpus
326  *
327  * ..but the i386 has somewhat limited tlb flushing capabilities,
328  * and page-granular flushes are available only on i486 and up.
329  */
330 struct flush_tlb_info {
331         /*
332          * We support several kinds of flushes.
333          *
334          * - Fully flush a single mm.  .mm will be set, .end will be
335          *   TLB_FLUSH_ALL, and .new_tlb_gen will be the tlb_gen to
336          *   which the IPI sender is trying to catch us up.
337          *
338          * - Partially flush a single mm.  .mm will be set, .start and
339          *   .end will indicate the range, and .new_tlb_gen will be set
340          *   such that the changes between generation .new_tlb_gen-1 and
341          *   .new_tlb_gen are entirely contained in the indicated range.
342          *
343          * - Fully flush all mms whose tlb_gens have been updated.  .mm
344          *   will be NULL, .end will be TLB_FLUSH_ALL, and .new_tlb_gen
345          *   will be zero.
346          */
347         struct mm_struct        *mm;
348         unsigned long           start;
349         unsigned long           end;
350         u64                     new_tlb_gen;
351 };
352
353 #define local_flush_tlb() __flush_tlb()
354
355 #define flush_tlb_mm(mm)        flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL)
356
357 #define flush_tlb_range(vma, start, end)        \
358                 flush_tlb_mm_range(vma->vm_mm, start, end, vma->vm_flags)
359
360 extern void flush_tlb_all(void);
361 extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
362                                 unsigned long end, unsigned long vmflag);
363 extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
364
365 static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a)
366 {
367         flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, VM_NONE);
368 }
369
370 void native_flush_tlb_others(const struct cpumask *cpumask,
371                              const struct flush_tlb_info *info);
372
373 static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
374                                         struct mm_struct *mm)
375 {
376         inc_mm_tlb_gen(mm);
377         cpumask_or(&batch->cpumask, &batch->cpumask, mm_cpumask(mm));
378 }
379
380 extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
381
382 #ifndef CONFIG_PARAVIRT
383 #define flush_tlb_others(mask, info)    \
384         native_flush_tlb_others(mask, info)
385 #endif
386
387 #endif /* _ASM_X86_TLBFLUSH_H */