x86/process: Make room for TIF_SPEC_L1D_FLUSH
[linux-2.6-microblaze.git] / arch / x86 / include / asm / thread_info.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /* thread_info.h: low-level thread information
3  *
4  * Copyright (C) 2002  David Howells (dhowells@redhat.com)
5  * - Incorporating suggestions made by Linus Torvalds and Dave Miller
6  */
7
8 #ifndef _ASM_X86_THREAD_INFO_H
9 #define _ASM_X86_THREAD_INFO_H
10
11 #include <linux/compiler.h>
12 #include <asm/page.h>
13 #include <asm/percpu.h>
14 #include <asm/types.h>
15
16 /*
17  * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
18  * reserve at the top of the kernel stack.  We do it because of a nasty
19  * 32-bit corner case.  On x86_32, the hardware stack frame is
20  * variable-length.  Except for vm86 mode, struct pt_regs assumes a
21  * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
22  * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
23  * does in at least one case:
24  *
25  * If we take an NMI early enough in SYSENTER, then we can end up with
26  * pt_regs that extends above sp0.  On the way out, in the espfix code,
27  * we can read the saved SS value, but that value will be above sp0.
28  * Without this offset, that can result in a page fault.  (We are
29  * careful that, in this case, the value we read doesn't matter.)
30  *
31  * In vm86 mode, the hardware frame is much longer still, so add 16
32  * bytes to make room for the real-mode segments.
33  *
34  * x86_64 has a fixed-length stack frame.
35  */
36 #ifdef CONFIG_X86_32
37 # ifdef CONFIG_VM86
38 #  define TOP_OF_KERNEL_STACK_PADDING 16
39 # else
40 #  define TOP_OF_KERNEL_STACK_PADDING 8
41 # endif
42 #else
43 # define TOP_OF_KERNEL_STACK_PADDING 0
44 #endif
45
46 /*
47  * low level task data that entry.S needs immediate access to
48  * - this struct should fit entirely inside of one cache line
49  * - this struct shares the supervisor stack pages
50  */
51 #ifndef __ASSEMBLY__
52 struct task_struct;
53 #include <asm/cpufeature.h>
54 #include <linux/atomic.h>
55
56 struct thread_info {
57         unsigned long           flags;          /* low level flags */
58         unsigned long           syscall_work;   /* SYSCALL_WORK_ flags */
59         u32                     status;         /* thread synchronous flags */
60 };
61
62 #define INIT_THREAD_INFO(tsk)                   \
63 {                                               \
64         .flags          = 0,                    \
65 }
66
67 #else /* !__ASSEMBLY__ */
68
69 #include <asm/asm-offsets.h>
70
71 #endif
72
73 /*
74  * thread information flags
75  * - these are process state flags that various assembly files
76  *   may need to access
77  */
78 #define TIF_NOTIFY_RESUME       1       /* callback before returning to user */
79 #define TIF_SIGPENDING          2       /* signal pending */
80 #define TIF_NEED_RESCHED        3       /* rescheduling necessary */
81 #define TIF_SINGLESTEP          4       /* reenable singlestep on user return*/
82 #define TIF_SSBD                5       /* Speculative store bypass disable */
83 #define TIF_SPEC_IB             9       /* Indirect branch speculation mitigation */
84 #define TIF_USER_RETURN_NOTIFY  11      /* notify kernel of userspace return */
85 #define TIF_UPROBE              12      /* breakpointed or singlestepping */
86 #define TIF_PATCH_PENDING       13      /* pending live patching update */
87 #define TIF_NEED_FPU_LOAD       14      /* load FPU on return to userspace */
88 #define TIF_NOCPUID             15      /* CPUID is not accessible in userland */
89 #define TIF_NOTSC               16      /* TSC is not accessible in userland */
90 #define TIF_NOTIFY_SIGNAL       17      /* signal notifications exist */
91 #define TIF_SLD                 18      /* Restore split lock detection on context switch */
92 #define TIF_MEMDIE              20      /* is terminating due to OOM killer */
93 #define TIF_POLLING_NRFLAG      21      /* idle is polling for TIF_NEED_RESCHED */
94 #define TIF_IO_BITMAP           22      /* uses I/O bitmap */
95 #define TIF_SPEC_FORCE_UPDATE   23      /* Force speculation MSR update in context switch */
96 #define TIF_FORCED_TF           24      /* true if TF in eflags artificially */
97 #define TIF_BLOCKSTEP           25      /* set when we want DEBUGCTLMSR_BTF */
98 #define TIF_LAZY_MMU_UPDATES    27      /* task is updating the mmu lazily */
99 #define TIF_ADDR32              29      /* 32-bit address space on 64 bits */
100
101 #define _TIF_NOTIFY_RESUME      (1 << TIF_NOTIFY_RESUME)
102 #define _TIF_SIGPENDING         (1 << TIF_SIGPENDING)
103 #define _TIF_NEED_RESCHED       (1 << TIF_NEED_RESCHED)
104 #define _TIF_SINGLESTEP         (1 << TIF_SINGLESTEP)
105 #define _TIF_SSBD               (1 << TIF_SSBD)
106 #define _TIF_SPEC_IB            (1 << TIF_SPEC_IB)
107 #define _TIF_USER_RETURN_NOTIFY (1 << TIF_USER_RETURN_NOTIFY)
108 #define _TIF_UPROBE             (1 << TIF_UPROBE)
109 #define _TIF_PATCH_PENDING      (1 << TIF_PATCH_PENDING)
110 #define _TIF_NEED_FPU_LOAD      (1 << TIF_NEED_FPU_LOAD)
111 #define _TIF_NOCPUID            (1 << TIF_NOCPUID)
112 #define _TIF_NOTSC              (1 << TIF_NOTSC)
113 #define _TIF_NOTIFY_SIGNAL      (1 << TIF_NOTIFY_SIGNAL)
114 #define _TIF_SLD                (1 << TIF_SLD)
115 #define _TIF_POLLING_NRFLAG     (1 << TIF_POLLING_NRFLAG)
116 #define _TIF_IO_BITMAP          (1 << TIF_IO_BITMAP)
117 #define _TIF_SPEC_FORCE_UPDATE  (1 << TIF_SPEC_FORCE_UPDATE)
118 #define _TIF_FORCED_TF          (1 << TIF_FORCED_TF)
119 #define _TIF_BLOCKSTEP          (1 << TIF_BLOCKSTEP)
120 #define _TIF_LAZY_MMU_UPDATES   (1 << TIF_LAZY_MMU_UPDATES)
121 #define _TIF_ADDR32             (1 << TIF_ADDR32)
122
123 /* flags to check in __switch_to() */
124 #define _TIF_WORK_CTXSW_BASE                                    \
125         (_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |           \
126          _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE | _TIF_SLD)
127
128 /*
129  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
130  */
131 #ifdef CONFIG_SMP
132 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE | _TIF_SPEC_IB)
133 #else
134 # define _TIF_WORK_CTXSW        (_TIF_WORK_CTXSW_BASE)
135 #endif
136
137 #ifdef CONFIG_X86_IOPL_IOPERM
138 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY | \
139                                  _TIF_IO_BITMAP)
140 #else
141 # define _TIF_WORK_CTXSW_PREV   (_TIF_WORK_CTXSW| _TIF_USER_RETURN_NOTIFY)
142 #endif
143
144 #define _TIF_WORK_CTXSW_NEXT    (_TIF_WORK_CTXSW)
145
146 #define STACK_WARN              (THREAD_SIZE/8)
147
148 /*
149  * macros/functions for gaining access to the thread information structure
150  *
151  * preempt_count needs to be 1 initially, until the scheduler is functional.
152  */
153 #ifndef __ASSEMBLY__
154
155 /*
156  * Walks up the stack frames to make sure that the specified object is
157  * entirely contained by a single stack frame.
158  *
159  * Returns:
160  *      GOOD_FRAME      if within a frame
161  *      BAD_STACK       if placed across a frame boundary (or outside stack)
162  *      NOT_STACK       unable to determine (no frame pointers, etc)
163  */
164 static inline int arch_within_stack_frames(const void * const stack,
165                                            const void * const stackend,
166                                            const void *obj, unsigned long len)
167 {
168 #if defined(CONFIG_FRAME_POINTER)
169         const void *frame = NULL;
170         const void *oldframe;
171
172         oldframe = __builtin_frame_address(1);
173         if (oldframe)
174                 frame = __builtin_frame_address(2);
175         /*
176          * low ----------------------------------------------> high
177          * [saved bp][saved ip][args][local vars][saved bp][saved ip]
178          *                     ^----------------^
179          *               allow copies only within here
180          */
181         while (stack <= frame && frame < stackend) {
182                 /*
183                  * If obj + len extends past the last frame, this
184                  * check won't pass and the next frame will be 0,
185                  * causing us to bail out and correctly report
186                  * the copy as invalid.
187                  */
188                 if (obj + len <= frame)
189                         return obj >= oldframe + 2 * sizeof(void *) ?
190                                 GOOD_FRAME : BAD_STACK;
191                 oldframe = frame;
192                 frame = *(const void * const *)frame;
193         }
194         return BAD_STACK;
195 #else
196         return NOT_STACK;
197 #endif
198 }
199
200 #endif  /* !__ASSEMBLY__ */
201
202 /*
203  * Thread-synchronous status.
204  *
205  * This is different from the flags in that nobody else
206  * ever touches our thread-synchronous status, so we don't
207  * have to worry about atomic accesses.
208  */
209 #define TS_COMPAT               0x0002  /* 32bit syscall active (64BIT)*/
210
211 #ifndef __ASSEMBLY__
212 #ifdef CONFIG_COMPAT
213 #define TS_I386_REGS_POKED      0x0004  /* regs poked by 32-bit ptracer */
214
215 #define arch_set_restart_data(restart)  \
216         do { restart->arch_data = current_thread_info()->status; } while (0)
217
218 #endif
219
220 #ifdef CONFIG_X86_32
221 #define in_ia32_syscall() true
222 #else
223 #define in_ia32_syscall() (IS_ENABLED(CONFIG_IA32_EMULATION) && \
224                            current_thread_info()->status & TS_COMPAT)
225 #endif
226
227 extern void arch_task_cache_init(void);
228 extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
229 extern void arch_release_task_struct(struct task_struct *tsk);
230 extern void arch_setup_new_exec(void);
231 #define arch_setup_new_exec arch_setup_new_exec
232 #endif  /* !__ASSEMBLY__ */
233
234 #endif /* _ASM_X86_THREAD_INFO_H */