KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
[linux-2.6-microblaze.git] / arch / x86 / include / asm / paravirt_types.h
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef _ASM_X86_PARAVIRT_TYPES_H
3 #define _ASM_X86_PARAVIRT_TYPES_H
4
5 /* Bitmask of what can be clobbered: usually at least eax. */
6 #define CLBR_NONE 0
7 #define CLBR_EAX  (1 << 0)
8 #define CLBR_ECX  (1 << 1)
9 #define CLBR_EDX  (1 << 2)
10 #define CLBR_EDI  (1 << 3)
11
12 #ifdef CONFIG_X86_32
13 /* CLBR_ANY should match all regs platform has. For i386, that's just it */
14 #define CLBR_ANY  ((1 << 4) - 1)
15
16 #define CLBR_ARG_REGS   (CLBR_EAX | CLBR_EDX | CLBR_ECX)
17 #define CLBR_RET_REG    (CLBR_EAX | CLBR_EDX)
18 #define CLBR_SCRATCH    (0)
19 #else
20 #define CLBR_RAX  CLBR_EAX
21 #define CLBR_RCX  CLBR_ECX
22 #define CLBR_RDX  CLBR_EDX
23 #define CLBR_RDI  CLBR_EDI
24 #define CLBR_RSI  (1 << 4)
25 #define CLBR_R8   (1 << 5)
26 #define CLBR_R9   (1 << 6)
27 #define CLBR_R10  (1 << 7)
28 #define CLBR_R11  (1 << 8)
29
30 #define CLBR_ANY  ((1 << 9) - 1)
31
32 #define CLBR_ARG_REGS   (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
33                          CLBR_RCX | CLBR_R8 | CLBR_R9)
34 #define CLBR_RET_REG    (CLBR_RAX)
35 #define CLBR_SCRATCH    (CLBR_R10 | CLBR_R11)
36
37 #endif /* X86_64 */
38
39 #define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
40
41 #ifndef __ASSEMBLY__
42
43 #include <asm/desc_defs.h>
44 #include <asm/kmap_types.h>
45 #include <asm/pgtable_types.h>
46 #include <asm/nospec-branch.h>
47
48 struct page;
49 struct thread_struct;
50 struct desc_ptr;
51 struct tss_struct;
52 struct mm_struct;
53 struct desc_struct;
54 struct task_struct;
55 struct cpumask;
56 struct flush_tlb_info;
57 struct mmu_gather;
58 struct vm_area_struct;
59
60 /*
61  * Wrapper type for pointers to code which uses the non-standard
62  * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
63  */
64 struct paravirt_callee_save {
65         void *func;
66 };
67
68 /* general info */
69 struct pv_info {
70 #ifdef CONFIG_PARAVIRT_XXL
71         u16 extra_user_64bit_cs;  /* __USER_CS if none */
72 #endif
73
74         const char *name;
75 };
76
77 struct pv_init_ops {
78         /*
79          * Patch may replace one of the defined code sequences with
80          * arbitrary code, subject to the same register constraints.
81          * This generally means the code is not free to clobber any
82          * registers other than EAX.  The patch function should return
83          * the number of bytes of code generated, as we nop pad the
84          * rest in generic code.
85          */
86         unsigned (*patch)(u8 type, void *insn_buff,
87                           unsigned long addr, unsigned len);
88 } __no_randomize_layout;
89
90 #ifdef CONFIG_PARAVIRT_XXL
91 struct pv_lazy_ops {
92         /* Set deferred update mode, used for batching operations. */
93         void (*enter)(void);
94         void (*leave)(void);
95         void (*flush)(void);
96 } __no_randomize_layout;
97 #endif
98
99 struct pv_time_ops {
100         unsigned long long (*sched_clock)(void);
101         unsigned long long (*steal_clock)(int cpu);
102 } __no_randomize_layout;
103
104 struct pv_cpu_ops {
105         /* hooks for various privileged instructions */
106         void (*io_delay)(void);
107
108 #ifdef CONFIG_PARAVIRT_XXL
109         unsigned long (*get_debugreg)(int regno);
110         void (*set_debugreg)(int regno, unsigned long value);
111
112         unsigned long (*read_cr0)(void);
113         void (*write_cr0)(unsigned long);
114
115         void (*write_cr4)(unsigned long);
116
117         /* Segment descriptor handling */
118         void (*load_tr_desc)(void);
119         void (*load_gdt)(const struct desc_ptr *);
120         void (*load_idt)(const struct desc_ptr *);
121         void (*set_ldt)(const void *desc, unsigned entries);
122         unsigned long (*store_tr)(void);
123         void (*load_tls)(struct thread_struct *t, unsigned int cpu);
124         void (*load_gs_index)(unsigned int idx);
125         void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
126                                 const void *desc);
127         void (*write_gdt_entry)(struct desc_struct *,
128                                 int entrynum, const void *desc, int size);
129         void (*write_idt_entry)(gate_desc *,
130                                 int entrynum, const gate_desc *gate);
131         void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
132         void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
133
134         void (*load_sp0)(unsigned long sp0);
135
136 #ifdef CONFIG_X86_IOPL_IOPERM
137         void (*invalidate_io_bitmap)(void);
138         void (*update_io_bitmap)(void);
139 #endif
140
141         void (*wbinvd)(void);
142
143         /* cpuid emulation, mostly so that caps bits can be disabled */
144         void (*cpuid)(unsigned int *eax, unsigned int *ebx,
145                       unsigned int *ecx, unsigned int *edx);
146
147         /* Unsafe MSR operations.  These will warn or panic on failure. */
148         u64 (*read_msr)(unsigned int msr);
149         void (*write_msr)(unsigned int msr, unsigned low, unsigned high);
150
151         /*
152          * Safe MSR operations.
153          * read sets err to 0 or -EIO.  write returns 0 or -EIO.
154          */
155         u64 (*read_msr_safe)(unsigned int msr, int *err);
156         int (*write_msr_safe)(unsigned int msr, unsigned low, unsigned high);
157
158         u64 (*read_pmc)(int counter);
159
160         /*
161          * Switch to usermode gs and return to 64-bit usermode using
162          * sysret.  Only used in 64-bit kernels to return to 64-bit
163          * processes.  Usermode register state, including %rsp, must
164          * already be restored.
165          */
166         void (*usergs_sysret64)(void);
167
168         /* Normal iret.  Jump to this with the standard iret stack
169            frame set up. */
170         void (*iret)(void);
171
172         void (*swapgs)(void);
173
174         void (*start_context_switch)(struct task_struct *prev);
175         void (*end_context_switch)(struct task_struct *next);
176 #endif
177 } __no_randomize_layout;
178
179 struct pv_irq_ops {
180 #ifdef CONFIG_PARAVIRT_XXL
181         /*
182          * Get/set interrupt state.  save_fl and restore_fl are only
183          * expected to use X86_EFLAGS_IF; all other bits
184          * returned from save_fl are undefined, and may be ignored by
185          * restore_fl.
186          *
187          * NOTE: These functions callers expect the callee to preserve
188          * more registers than the standard C calling convention.
189          */
190         struct paravirt_callee_save save_fl;
191         struct paravirt_callee_save restore_fl;
192         struct paravirt_callee_save irq_disable;
193         struct paravirt_callee_save irq_enable;
194
195         void (*safe_halt)(void);
196         void (*halt)(void);
197 #endif
198 } __no_randomize_layout;
199
200 struct pv_mmu_ops {
201         /* TLB operations */
202         void (*flush_tlb_user)(void);
203         void (*flush_tlb_kernel)(void);
204         void (*flush_tlb_one_user)(unsigned long addr);
205         void (*flush_tlb_others)(const struct cpumask *cpus,
206                                  const struct flush_tlb_info *info);
207
208         void (*tlb_remove_table)(struct mmu_gather *tlb, void *table);
209
210         /* Hook for intercepting the destruction of an mm_struct. */
211         void (*exit_mmap)(struct mm_struct *mm);
212
213 #ifdef CONFIG_PARAVIRT_XXL
214         struct paravirt_callee_save read_cr2;
215         void (*write_cr2)(unsigned long);
216
217         unsigned long (*read_cr3)(void);
218         void (*write_cr3)(unsigned long);
219
220         /* Hooks for intercepting the creation/use of an mm_struct. */
221         void (*activate_mm)(struct mm_struct *prev,
222                             struct mm_struct *next);
223         void (*dup_mmap)(struct mm_struct *oldmm,
224                          struct mm_struct *mm);
225
226         /* Hooks for allocating and freeing a pagetable top-level */
227         int  (*pgd_alloc)(struct mm_struct *mm);
228         void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
229
230         /*
231          * Hooks for allocating/releasing pagetable pages when they're
232          * attached to a pagetable
233          */
234         void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
235         void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
236         void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
237         void (*alloc_p4d)(struct mm_struct *mm, unsigned long pfn);
238         void (*release_pte)(unsigned long pfn);
239         void (*release_pmd)(unsigned long pfn);
240         void (*release_pud)(unsigned long pfn);
241         void (*release_p4d)(unsigned long pfn);
242
243         /* Pagetable manipulation functions */
244         void (*set_pte)(pte_t *ptep, pte_t pteval);
245         void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
246
247         pte_t (*ptep_modify_prot_start)(struct vm_area_struct *vma, unsigned long addr,
248                                         pte_t *ptep);
249         void (*ptep_modify_prot_commit)(struct vm_area_struct *vma, unsigned long addr,
250                                         pte_t *ptep, pte_t pte);
251
252         struct paravirt_callee_save pte_val;
253         struct paravirt_callee_save make_pte;
254
255         struct paravirt_callee_save pgd_val;
256         struct paravirt_callee_save make_pgd;
257
258         void (*set_pud)(pud_t *pudp, pud_t pudval);
259
260         struct paravirt_callee_save pmd_val;
261         struct paravirt_callee_save make_pmd;
262
263         struct paravirt_callee_save pud_val;
264         struct paravirt_callee_save make_pud;
265
266         void (*set_p4d)(p4d_t *p4dp, p4d_t p4dval);
267
268 #if CONFIG_PGTABLE_LEVELS >= 5
269         struct paravirt_callee_save p4d_val;
270         struct paravirt_callee_save make_p4d;
271
272         void (*set_pgd)(pgd_t *pgdp, pgd_t pgdval);
273 #endif  /* CONFIG_PGTABLE_LEVELS >= 5 */
274
275         struct pv_lazy_ops lazy_mode;
276
277         /* dom0 ops */
278
279         /* Sometimes the physical address is a pfn, and sometimes its
280            an mfn.  We can tell which is which from the index. */
281         void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
282                            phys_addr_t phys, pgprot_t flags);
283 #endif
284 } __no_randomize_layout;
285
286 struct arch_spinlock;
287 #ifdef CONFIG_SMP
288 #include <asm/spinlock_types.h>
289 #endif
290
291 struct qspinlock;
292
293 struct pv_lock_ops {
294         void (*queued_spin_lock_slowpath)(struct qspinlock *lock, u32 val);
295         struct paravirt_callee_save queued_spin_unlock;
296
297         void (*wait)(u8 *ptr, u8 val);
298         void (*kick)(int cpu);
299
300         struct paravirt_callee_save vcpu_is_preempted;
301 } __no_randomize_layout;
302
303 /* This contains all the paravirt structures: we get a convenient
304  * number for each function using the offset which we use to indicate
305  * what to patch. */
306 struct paravirt_patch_template {
307         struct pv_init_ops      init;
308         struct pv_time_ops      time;
309         struct pv_cpu_ops       cpu;
310         struct pv_irq_ops       irq;
311         struct pv_mmu_ops       mmu;
312         struct pv_lock_ops      lock;
313 } __no_randomize_layout;
314
315 extern struct pv_info pv_info;
316 extern struct paravirt_patch_template pv_ops;
317
318 #define PARAVIRT_PATCH(x)                                       \
319         (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
320
321 #define paravirt_type(op)                               \
322         [paravirt_typenum] "i" (PARAVIRT_PATCH(op)),    \
323         [paravirt_opptr] "i" (&(pv_ops.op))
324 #define paravirt_clobber(clobber)               \
325         [paravirt_clobber] "i" (clobber)
326
327 /*
328  * Generate some code, and mark it as patchable by the
329  * apply_paravirt() alternate instruction patcher.
330  */
331 #define _paravirt_alt(insn_string, type, clobber)       \
332         "771:\n\t" insn_string "\n" "772:\n"            \
333         ".pushsection .parainstructions,\"a\"\n"        \
334         _ASM_ALIGN "\n"                                 \
335         _ASM_PTR " 771b\n"                              \
336         "  .byte " type "\n"                            \
337         "  .byte 772b-771b\n"                           \
338         "  .short " clobber "\n"                        \
339         ".popsection\n"
340
341 /* Generate patchable code, with the default asm parameters. */
342 #define paravirt_alt(insn_string)                                       \
343         _paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
344
345 /* Simple instruction patching code. */
346 #define NATIVE_LABEL(a,x,b) "\n\t.globl " a #x "_" #b "\n" a #x "_" #b ":\n\t"
347
348 unsigned paravirt_patch_ident_64(void *insn_buff, unsigned len);
349 unsigned paravirt_patch_default(u8 type, void *insn_buff, unsigned long addr, unsigned len);
350 unsigned paravirt_patch_insns(void *insn_buff, unsigned len, const char *start, const char *end);
351
352 unsigned native_patch(u8 type, void *insn_buff, unsigned long addr, unsigned len);
353
354 int paravirt_disable_iospace(void);
355
356 /*
357  * This generates an indirect call based on the operation type number.
358  * The type number, computed in PARAVIRT_PATCH, is derived from the
359  * offset into the paravirt_patch_template structure, and can therefore be
360  * freely converted back into a structure offset.
361  */
362 #define PARAVIRT_CALL                                   \
363         ANNOTATE_RETPOLINE_SAFE                         \
364         "call *%c[paravirt_opptr];"
365
366 /*
367  * These macros are intended to wrap calls through one of the paravirt
368  * ops structs, so that they can be later identified and patched at
369  * runtime.
370  *
371  * Normally, a call to a pv_op function is a simple indirect call:
372  * (pv_op_struct.operations)(args...).
373  *
374  * Unfortunately, this is a relatively slow operation for modern CPUs,
375  * because it cannot necessarily determine what the destination
376  * address is.  In this case, the address is a runtime constant, so at
377  * the very least we can patch the call to e a simple direct call, or
378  * ideally, patch an inline implementation into the callsite.  (Direct
379  * calls are essentially free, because the call and return addresses
380  * are completely predictable.)
381  *
382  * For i386, these macros rely on the standard gcc "regparm(3)" calling
383  * convention, in which the first three arguments are placed in %eax,
384  * %edx, %ecx (in that order), and the remaining arguments are placed
385  * on the stack.  All caller-save registers (eax,edx,ecx) are expected
386  * to be modified (either clobbered or used for return values).
387  * X86_64, on the other hand, already specifies a register-based calling
388  * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
389  * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
390  * special handling for dealing with 4 arguments, unlike i386.
391  * However, x86_64 also have to clobber all caller saved registers, which
392  * unfortunately, are quite a bit (r8 - r11)
393  *
394  * The call instruction itself is marked by placing its start address
395  * and size into the .parainstructions section, so that
396  * apply_paravirt() in arch/i386/kernel/alternative.c can do the
397  * appropriate patching under the control of the backend pv_init_ops
398  * implementation.
399  *
400  * Unfortunately there's no way to get gcc to generate the args setup
401  * for the call, and then allow the call itself to be generated by an
402  * inline asm.  Because of this, we must do the complete arg setup and
403  * return value handling from within these macros.  This is fairly
404  * cumbersome.
405  *
406  * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
407  * It could be extended to more arguments, but there would be little
408  * to be gained from that.  For each number of arguments, there are
409  * the two VCALL and CALL variants for void and non-void functions.
410  *
411  * When there is a return value, the invoker of the macro must specify
412  * the return type.  The macro then uses sizeof() on that type to
413  * determine whether its a 32 or 64 bit value, and places the return
414  * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
415  * 64-bit). For x86_64 machines, it just returns at %rax regardless of
416  * the return value size.
417  *
418  * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
419  * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
420  * in low,high order
421  *
422  * Small structures are passed and returned in registers.  The macro
423  * calling convention can't directly deal with this, so the wrapper
424  * functions must do this.
425  *
426  * These PVOP_* macros are only defined within this header.  This
427  * means that all uses must be wrapped in inline functions.  This also
428  * makes sure the incoming and outgoing types are always correct.
429  */
430 #ifdef CONFIG_X86_32
431 #define PVOP_VCALL_ARGS                                                 \
432         unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx;
433
434 #define PVOP_CALL_ARGS                  PVOP_VCALL_ARGS
435
436 #define PVOP_CALL_ARG1(x)               "a" ((unsigned long)(x))
437 #define PVOP_CALL_ARG2(x)               "d" ((unsigned long)(x))
438 #define PVOP_CALL_ARG3(x)               "c" ((unsigned long)(x))
439
440 #define PVOP_VCALL_CLOBBERS             "=a" (__eax), "=d" (__edx),     \
441                                         "=c" (__ecx)
442 #define PVOP_CALL_CLOBBERS              PVOP_VCALL_CLOBBERS
443
444 #define PVOP_VCALLEE_CLOBBERS           "=a" (__eax), "=d" (__edx)
445 #define PVOP_CALLEE_CLOBBERS            PVOP_VCALLEE_CLOBBERS
446
447 #define EXTRA_CLOBBERS
448 #define VEXTRA_CLOBBERS
449 #else  /* CONFIG_X86_64 */
450 /* [re]ax isn't an arg, but the return val */
451 #define PVOP_VCALL_ARGS                                         \
452         unsigned long __edi = __edi, __esi = __esi,             \
453                 __edx = __edx, __ecx = __ecx, __eax = __eax;
454
455 #define PVOP_CALL_ARGS          PVOP_VCALL_ARGS
456
457 #define PVOP_CALL_ARG1(x)               "D" ((unsigned long)(x))
458 #define PVOP_CALL_ARG2(x)               "S" ((unsigned long)(x))
459 #define PVOP_CALL_ARG3(x)               "d" ((unsigned long)(x))
460 #define PVOP_CALL_ARG4(x)               "c" ((unsigned long)(x))
461
462 #define PVOP_VCALL_CLOBBERS     "=D" (__edi),                           \
463                                 "=S" (__esi), "=d" (__edx),             \
464                                 "=c" (__ecx)
465 #define PVOP_CALL_CLOBBERS      PVOP_VCALL_CLOBBERS, "=a" (__eax)
466
467 /* void functions are still allowed [re]ax for scratch */
468 #define PVOP_VCALLEE_CLOBBERS   "=a" (__eax)
469 #define PVOP_CALLEE_CLOBBERS    PVOP_VCALLEE_CLOBBERS
470
471 #define EXTRA_CLOBBERS   , "r8", "r9", "r10", "r11"
472 #define VEXTRA_CLOBBERS  , "rax", "r8", "r9", "r10", "r11"
473 #endif  /* CONFIG_X86_32 */
474
475 #ifdef CONFIG_PARAVIRT_DEBUG
476 #define PVOP_TEST_NULL(op)      BUG_ON(pv_ops.op == NULL)
477 #else
478 #define PVOP_TEST_NULL(op)      ((void)pv_ops.op)
479 #endif
480
481 #define PVOP_RETMASK(rettype)                                           \
482         ({      unsigned long __mask = ~0UL;                            \
483                 switch (sizeof(rettype)) {                              \
484                 case 1: __mask =       0xffUL; break;                   \
485                 case 2: __mask =     0xffffUL; break;                   \
486                 case 4: __mask = 0xffffffffUL; break;                   \
487                 default: break;                                         \
488                 }                                                       \
489                 __mask;                                                 \
490         })
491
492
493 #define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,         \
494                       pre, post, ...)                                   \
495         ({                                                              \
496                 rettype __ret;                                          \
497                 PVOP_CALL_ARGS;                                         \
498                 PVOP_TEST_NULL(op);                                     \
499                 /* This is 32-bit specific, but is okay in 64-bit */    \
500                 /* since this condition will never hold */              \
501                 if (sizeof(rettype) > sizeof(unsigned long)) {          \
502                         asm volatile(pre                                \
503                                      paravirt_alt(PARAVIRT_CALL)        \
504                                      post                               \
505                                      : call_clbr, ASM_CALL_CONSTRAINT   \
506                                      : paravirt_type(op),               \
507                                        paravirt_clobber(clbr),          \
508                                        ##__VA_ARGS__                    \
509                                      : "memory", "cc" extra_clbr);      \
510                         __ret = (rettype)((((u64)__edx) << 32) | __eax); \
511                 } else {                                                \
512                         asm volatile(pre                                \
513                                      paravirt_alt(PARAVIRT_CALL)        \
514                                      post                               \
515                                      : call_clbr, ASM_CALL_CONSTRAINT   \
516                                      : paravirt_type(op),               \
517                                        paravirt_clobber(clbr),          \
518                                        ##__VA_ARGS__                    \
519                                      : "memory", "cc" extra_clbr);      \
520                         __ret = (rettype)(__eax & PVOP_RETMASK(rettype));       \
521                 }                                                       \
522                 __ret;                                                  \
523         })
524
525 #define __PVOP_CALL(rettype, op, pre, post, ...)                        \
526         ____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,        \
527                       EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
528
529 #define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)                  \
530         ____PVOP_CALL(rettype, op.func, CLBR_RET_REG,                   \
531                       PVOP_CALLEE_CLOBBERS, ,                           \
532                       pre, post, ##__VA_ARGS__)
533
534
535 #define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...) \
536         ({                                                              \
537                 PVOP_VCALL_ARGS;                                        \
538                 PVOP_TEST_NULL(op);                                     \
539                 asm volatile(pre                                        \
540                              paravirt_alt(PARAVIRT_CALL)                \
541                              post                                       \
542                              : call_clbr, ASM_CALL_CONSTRAINT           \
543                              : paravirt_type(op),                       \
544                                paravirt_clobber(clbr),                  \
545                                ##__VA_ARGS__                            \
546                              : "memory", "cc" extra_clbr);              \
547         })
548
549 #define __PVOP_VCALL(op, pre, post, ...)                                \
550         ____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,               \
551                        VEXTRA_CLOBBERS,                                 \
552                        pre, post, ##__VA_ARGS__)
553
554 #define __PVOP_VCALLEESAVE(op, pre, post, ...)                          \
555         ____PVOP_VCALL(op.func, CLBR_RET_REG,                           \
556                       PVOP_VCALLEE_CLOBBERS, ,                          \
557                       pre, post, ##__VA_ARGS__)
558
559
560
561 #define PVOP_CALL0(rettype, op)                                         \
562         __PVOP_CALL(rettype, op, "", "")
563 #define PVOP_VCALL0(op)                                                 \
564         __PVOP_VCALL(op, "", "")
565
566 #define PVOP_CALLEE0(rettype, op)                                       \
567         __PVOP_CALLEESAVE(rettype, op, "", "")
568 #define PVOP_VCALLEE0(op)                                               \
569         __PVOP_VCALLEESAVE(op, "", "")
570
571
572 #define PVOP_CALL1(rettype, op, arg1)                                   \
573         __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
574 #define PVOP_VCALL1(op, arg1)                                           \
575         __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
576
577 #define PVOP_CALLEE1(rettype, op, arg1)                                 \
578         __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
579 #define PVOP_VCALLEE1(op, arg1)                                         \
580         __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
581
582
583 #define PVOP_CALL2(rettype, op, arg1, arg2)                             \
584         __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),          \
585                     PVOP_CALL_ARG2(arg2))
586 #define PVOP_VCALL2(op, arg1, arg2)                                     \
587         __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),                  \
588                      PVOP_CALL_ARG2(arg2))
589
590 #define PVOP_CALLEE2(rettype, op, arg1, arg2)                           \
591         __PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),    \
592                           PVOP_CALL_ARG2(arg2))
593 #define PVOP_VCALLEE2(op, arg1, arg2)                                   \
594         __PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),            \
595                            PVOP_CALL_ARG2(arg2))
596
597
598 #define PVOP_CALL3(rettype, op, arg1, arg2, arg3)                       \
599         __PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),          \
600                     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
601 #define PVOP_VCALL3(op, arg1, arg2, arg3)                               \
602         __PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),                  \
603                      PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
604
605 /* This is the only difference in x86_64. We can make it much simpler */
606 #ifdef CONFIG_X86_32
607 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)                 \
608         __PVOP_CALL(rettype, op,                                        \
609                     "push %[_arg4];", "lea 4(%%esp),%%esp;",            \
610                     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),         \
611                     PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
612 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)                         \
613         __PVOP_VCALL(op,                                                \
614                     "push %[_arg4];", "lea 4(%%esp),%%esp;",            \
615                     "0" ((u32)(arg1)), "1" ((u32)(arg2)),               \
616                     "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
617 #else
618 #define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)                 \
619         __PVOP_CALL(rettype, op, "", "",                                \
620                     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),         \
621                     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
622 #define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)                         \
623         __PVOP_VCALL(op, "", "",                                        \
624                      PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),        \
625                      PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
626 #endif
627
628 /* Lazy mode for batching updates / context switch */
629 enum paravirt_lazy_mode {
630         PARAVIRT_LAZY_NONE,
631         PARAVIRT_LAZY_MMU,
632         PARAVIRT_LAZY_CPU,
633 };
634
635 enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
636 void paravirt_start_context_switch(struct task_struct *prev);
637 void paravirt_end_context_switch(struct task_struct *next);
638
639 void paravirt_enter_lazy_mmu(void);
640 void paravirt_leave_lazy_mmu(void);
641 void paravirt_flush_lazy_mmu(void);
642
643 void _paravirt_nop(void);
644 u64 _paravirt_ident_64(u64);
645
646 #define paravirt_nop    ((void *)_paravirt_nop)
647
648 /* These all sit in the .parainstructions section to tell us what to patch. */
649 struct paravirt_patch_site {
650         u8 *instr;              /* original instructions */
651         u8 type;                /* type of this instruction */
652         u8 len;                 /* length of original instruction */
653 };
654
655 extern struct paravirt_patch_site __parainstructions[],
656         __parainstructions_end[];
657
658 #endif  /* __ASSEMBLY__ */
659
660 #endif  /* _ASM_X86_PARAVIRT_TYPES_H */