tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
[linux-2.6-microblaze.git] / arch / openrisc / kernel / signal.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * OpenRISC signal.c
4  *
5  * Linux architectural port borrowing liberally from similar works of
6  * others.  All original copyrights apply as per the original source
7  * declaration.
8  *
9  * Modifications for the OpenRISC architecture:
10  * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11  * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
12  */
13
14 #include <linux/sched.h>
15 #include <linux/mm.h>
16 #include <linux/smp.h>
17 #include <linux/kernel.h>
18 #include <linux/signal.h>
19 #include <linux/errno.h>
20 #include <linux/wait.h>
21 #include <linux/ptrace.h>
22 #include <linux/unistd.h>
23 #include <linux/stddef.h>
24 #include <linux/tracehook.h>
25
26 #include <asm/processor.h>
27 #include <asm/syscall.h>
28 #include <asm/ucontext.h>
29 #include <linux/uaccess.h>
30
31 #define DEBUG_SIG 0
32
33 struct rt_sigframe {
34         struct siginfo info;
35         struct ucontext uc;
36         unsigned char retcode[16];      /* trampoline code */
37 };
38
39 static int restore_sigcontext(struct pt_regs *regs,
40                               struct sigcontext __user *sc)
41 {
42         int err = 0;
43
44         /* Always make any pending restarted system calls return -EINTR */
45         current->restart_block.fn = do_no_restart_syscall;
46
47         /*
48          * Restore the regs from &sc->regs.
49          * (sc is already checked since the sigframe was
50          *  checked in sys_sigreturn previously)
51          */
52         err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
53         err |= __copy_from_user(&regs->pc, &sc->regs.pc, sizeof(unsigned long));
54         err |= __copy_from_user(&regs->sr, &sc->regs.sr, sizeof(unsigned long));
55
56         /* make sure the SM-bit is cleared so user-mode cannot fool us */
57         regs->sr &= ~SPR_SR_SM;
58
59         regs->orig_gpr11 = -1;  /* Avoid syscall restart checks */
60
61         /* TODO: the other ports use regs->orig_XX to disable syscall checks
62          * after this completes, but we don't use that mechanism. maybe we can
63          * use it now ?
64          */
65
66         return err;
67 }
68
69 asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
70 {
71         struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp;
72         sigset_t set;
73
74         /*
75          * Since we stacked the signal on a dword boundary,
76          * then frame should be dword aligned here.  If it's
77          * not, then the user is trying to mess with us.
78          */
79         if (((unsigned long)frame) & 3)
80                 goto badframe;
81
82         if (!access_ok(frame, sizeof(*frame)))
83                 goto badframe;
84         if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
85                 goto badframe;
86
87         set_current_blocked(&set);
88
89         if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
90                 goto badframe;
91
92         if (restore_altstack(&frame->uc.uc_stack))
93                 goto badframe;
94
95         return regs->gpr[11];
96
97 badframe:
98         force_sig(SIGSEGV);
99         return 0;
100 }
101
102 /*
103  * Set up a signal frame.
104  */
105
106 static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
107 {
108         int err = 0;
109
110         /* copy the regs */
111         /* There should be no need to save callee-saved registers here...
112          * ...but we save them anyway.  Revisit this
113          */
114         err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
115         err |= __copy_to_user(&sc->regs.pc, &regs->pc, sizeof(unsigned long));
116         err |= __copy_to_user(&sc->regs.sr, &regs->sr, sizeof(unsigned long));
117
118         return err;
119 }
120
121 static inline unsigned long align_sigframe(unsigned long sp)
122 {
123         return sp & ~3UL;
124 }
125
126 /*
127  * Work out where the signal frame should go.  It's either on the user stack
128  * or the alternate stack.
129  */
130
131 static inline void __user *get_sigframe(struct ksignal *ksig,
132                                         struct pt_regs *regs, size_t frame_size)
133 {
134         unsigned long sp = regs->sp;
135
136         /* redzone */
137         sp -= STACK_FRAME_OVERHEAD;
138         sp = sigsp(sp, ksig);
139         sp = align_sigframe(sp - frame_size);
140
141         return (void __user *)sp;
142 }
143
144 /* grab and setup a signal frame.
145  *
146  * basically we stack a lot of state info, and arrange for the
147  * user-mode program to return to the kernel using either a
148  * trampoline which performs the syscall sigreturn, or a provided
149  * user-mode trampoline.
150  */
151 static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
152                           struct pt_regs *regs)
153 {
154         struct rt_sigframe __user *frame;
155         unsigned long return_ip;
156         int err = 0;
157
158         frame = get_sigframe(ksig, regs, sizeof(*frame));
159
160         if (!access_ok(frame, sizeof(*frame)))
161                 return -EFAULT;
162
163         /* Create siginfo.  */
164         if (ksig->ka.sa.sa_flags & SA_SIGINFO)
165                 err |= copy_siginfo_to_user(&frame->info, &ksig->info);
166
167         /* Create the ucontext.  */
168         err |= __put_user(0, &frame->uc.uc_flags);
169         err |= __put_user(NULL, &frame->uc.uc_link);
170         err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
171         err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
172
173         err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
174
175         if (err)
176                 return -EFAULT;
177
178         /* trampoline - the desired return ip is the retcode itself */
179         return_ip = (unsigned long)&frame->retcode;
180         /* This is:
181                 l.ori r11,r0,__NR_sigreturn
182                 l.sys 1
183          */
184         err |= __put_user(0xa960,             (short __user *)(frame->retcode + 0));
185         err |= __put_user(__NR_rt_sigreturn,  (short __user *)(frame->retcode + 2));
186         err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4));
187         err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8));
188
189         if (err)
190                 return -EFAULT;
191
192         /* Set up registers for signal handler */
193         regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
194         regs->gpr[9] = (unsigned long)return_ip;     /* what we enter LATER */
195         regs->gpr[3] = (unsigned long)ksig->sig;           /* arg 1: signo */
196         regs->gpr[4] = (unsigned long)&frame->info;  /* arg 2: (siginfo_t*) */
197         regs->gpr[5] = (unsigned long)&frame->uc;    /* arg 3: ucontext */
198
199         /* actually move the usp to reflect the stacked frame */
200         regs->sp = (unsigned long)frame;
201
202         return 0;
203 }
204
205 static inline void
206 handle_signal(struct ksignal *ksig, struct pt_regs *regs)
207 {
208         int ret;
209
210         ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
211
212         signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
213 }
214
215 /*
216  * Note that 'init' is a special process: it doesn't get signals it doesn't
217  * want to handle. Thus you cannot kill init even with a SIGKILL even by
218  * mistake.
219  *
220  * Also note that the regs structure given here as an argument, is the latest
221  * pushed pt_regs. It may or may not be the same as the first pushed registers
222  * when the initial usermode->kernelmode transition took place. Therefore
223  * we can use user_mode(regs) to see if we came directly from kernel or user
224  * mode below.
225  */
226
227 int do_signal(struct pt_regs *regs, int syscall)
228 {
229         struct ksignal ksig;
230         unsigned long continue_addr = 0;
231         unsigned long restart_addr = 0;
232         unsigned long retval = 0;
233         int restart = 0;
234
235         if (syscall) {
236                 continue_addr = regs->pc;
237                 restart_addr = continue_addr - 4;
238                 retval = regs->gpr[11];
239
240                 /*
241                  * Setup syscall restart here so that a debugger will
242                  * see the already changed PC.
243                  */
244                 switch (retval) {
245                 case -ERESTART_RESTARTBLOCK:
246                         restart = -2;
247                         fallthrough;
248                 case -ERESTARTNOHAND:
249                 case -ERESTARTSYS:
250                 case -ERESTARTNOINTR:
251                         restart++;
252                         regs->gpr[11] = regs->orig_gpr11;
253                         regs->pc = restart_addr;
254                         break;
255                 }
256         }
257
258         /*
259          * Get the signal to deliver.  During the call to get_signal the
260          * debugger may change all our registers so we may need to revert
261          * the decision to restart the syscall; specifically, if the PC is
262          * changed, don't restart the syscall.
263          */
264         if (get_signal(&ksig)) {
265                 if (unlikely(restart) && regs->pc == restart_addr) {
266                         if (retval == -ERESTARTNOHAND ||
267                             retval == -ERESTART_RESTARTBLOCK
268                             || (retval == -ERESTARTSYS
269                                 && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
270                                 /* No automatic restart */
271                                 regs->gpr[11] = -EINTR;
272                                 regs->pc = continue_addr;
273                         }
274                 }
275                 handle_signal(&ksig, regs);
276         } else {
277                 /* no handler */
278                 restore_saved_sigmask();
279                 /*
280                  * Restore pt_regs PC as syscall restart will be handled by
281                  * kernel without return to userspace
282                  */
283                 if (unlikely(restart) && regs->pc == restart_addr) {
284                         regs->pc = continue_addr;
285                         return restart;
286                 }
287         }
288
289         return 0;
290 }
291
292 asmlinkage int
293 do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
294 {
295         do {
296                 if (likely(thread_flags & _TIF_NEED_RESCHED)) {
297                         schedule();
298                 } else {
299                         if (unlikely(!user_mode(regs)))
300                                 return 0;
301                         local_irq_enable();
302                         if (thread_flags & _TIF_SIGPENDING) {
303                                 int restart = do_signal(regs, syscall);
304                                 if (unlikely(restart)) {
305                                         /*
306                                          * Restart without handlers.
307                                          * Deal with it without leaving
308                                          * the kernel space.
309                                          */
310                                         return restart;
311                                 }
312                                 syscall = 0;
313                         } else {
314                                 tracehook_notify_resume(regs);
315                         }
316                 }
317                 local_irq_disable();
318                 thread_flags = current_thread_info()->flags;
319         } while (thread_flags & _TIF_WORK_MASK);
320         return 0;
321 }