arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
   4  */
   5
   6 /dts-v1/;
   7 #include "rk3399-puma.dtsi"
   8 #include <dt-bindings/input/input.h>
   9
  10 / {
  11         model = "Theobroma Systems RK3399-Q7 SoM";
  12         compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
  13
  14         aliases {
  15                 mmc1 = &sdmmc;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0:115200n8";
  20         };
  21
  22         gpio-keys {
  23                 compatible = "gpio-keys";
  24                 pinctrl-0 = <&haikou_keys_pin>;
  25                 pinctrl-names = "default";
  26
  27                 button-batlow-n {
  28                         gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  29                         label = "BATLOW#";
  30                         linux,code = <KEY_BATTERY>;
  31                 };
  32
  33                 button-slp-btn-n {
  34                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
  35                         label = "SLP_BTN#";
  36                         linux,code = <KEY_SLEEP>;
  37                 };
  38
  39                 button-wake-n {
  40                         gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
  41                         label = "WAKE#";
  42                         linux,code = <KEY_WAKEUP>;
  43                         wakeup-source;
  44                 };
  45
  46                 switch-lid-btn-n {
  47                         gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
  48                         label = "LID_BTN#";
  49                         linux,code = <SW_LID>;
  50                         linux,input-type = <EV_SW>;
  51                 };
  52         };
  53
  54         leds {
  55                 pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
  56
  57                 sd_card_led: led-1 {
  58                         label = "sd_card_led";
  59                         gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
  60                         linux,default-trigger = "mmc0";
  61                 };
  62         };
  63
  64         i2s0-sound {
  65                 compatible = "simple-audio-card";
  66                 simple-audio-card,format = "i2s";
  67                 simple-audio-card,name = "Haikou,I2S-codec";
  68                 simple-audio-card,mclk-fs = <512>;
  69
  70                 simple-audio-card,codec {
  71                         clocks = <&sgtl5000_clk>;
  72                         sound-dai = <&sgtl5000>;
  73                 };
  74
  75                 simple-audio-card,cpu {
  76                         bitclock-master;
  77                         frame-master;
  78                         sound-dai = <&i2s0>;
  79                 };
  80         };
  81
  82         sgtl5000_clk: sgtl5000-oscillator  {
  83                         compatible = "fixed-clock";
  84                         #clock-cells = <0>;
  85                         clock-frequency = <24576000>;
  86         };
  87
  88         dc_12v: dc-12v {
  89                 compatible = "regulator-fixed";
  90                 regulator-name = "dc_12v";
  91                 regulator-always-on;
  92                 regulator-boot-on;
  93                 regulator-min-microvolt = <12000000>;
  94                 regulator-max-microvolt = <12000000>;
  95         };
  96
  97         vcc3v3_baseboard: vcc3v3-baseboard {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "vcc3v3_baseboard";
 100                 regulator-always-on;
 101                 regulator-boot-on;
 102                 regulator-min-microvolt = <3300000>;
 103                 regulator-max-microvolt = <3300000>;
 104                 vin-supply = <&dc_12v>;
 105         };
 106
 107         vcc5v0_baseboard: vcc5v0-baseboard {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "vcc5v0_baseboard";
 110                 regulator-always-on;
 111                 regulator-boot-on;
 112                 regulator-min-microvolt = <5000000>;
 113                 regulator-max-microvolt = <5000000>;
 114                 vin-supply = <&dc_12v>;
 115         };
 116
 117         vcc5v0_otg: vcc5v0-otg-regulator {
 118                 compatible = "regulator-fixed";
 119                 enable-active-high;
 120                 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 121                 pinctrl-names = "default";
 122                 pinctrl-0 = <&otg_vbus_drv>;
 123                 regulator-name = "vcc5v0_otg";
 124                 regulator-always-on;
 125         };
 126
 127         vdda_codec: vdda-codec {
 128                 compatible = "regulator-fixed";
 129                 regulator-name = "vdda_codec";
 130                 regulator-boot-on;
 131                 regulator-min-microvolt = <3300000>;
 132                 regulator-max-microvolt = <3300000>;
 133                 vin-supply = <&vcc5v0_baseboard>;
 134         };
 135
 136         vddd_codec: vddd-codec {
 137                 compatible = "regulator-fixed";
 138                 regulator-name = "vddd_codec";
 139                 regulator-boot-on;
 140                 regulator-min-microvolt = <1600000>;
 141                 regulator-max-microvolt = <1600000>;
 142                 vin-supply = <&vcc5v0_baseboard>;
 143         };
 144 };
 145
 146 &hdmi {
 147         ddc-i2c-bus = <&i2c3>;
 148         status = "okay";
 149 };
 150
 151 &i2c1 {
 152         status = "okay";
 153         clock-frequency = <400000>;
 154 };
 155
 156 &i2c2 {
 157         status = "okay";
 158         clock-frequency = <400000>;
 159 };
 160
 161 &i2c3 {
 162         i2c-scl-rising-time-ns = <450>;
 163         i2c-scl-falling-time-ns = <15>;
 164         status = "okay";
 165 };
 166
 167 &i2c4 {
 168         status = "okay";
 169         clock-frequency = <400000>;
 170
 171         sgtl5000: codec@a {
 172                 compatible = "fsl,sgtl5000";
 173                 reg = <0x0a>;
 174                 clocks = <&sgtl5000_clk>;
 175                 #sound-dai-cells = <0>;
 176                 VDDA-supply = <&vdda_codec>;
 177                 VDDIO-supply = <&vdda_codec>;
 178                 VDDD-supply = <&vddd_codec>;
 179                 status = "okay";
 180         };
 181 };
 182
 183 &i2c6 {
 184         status = "okay";
 185         clock-frequency = <400000>;
 186 };
 187
 188 &pcie_phy {
 189         status = "okay";
 190 };
 191
 192 &pcie0 {
 193         ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 194         num-lanes = <4>;
 195         pinctrl-names = "default";
 196         pinctrl-0 = <&pcie_clkreqn_cpm>;
 197         status = "okay";
 198 };
 199
 200 &pinctrl {
 201         buttons {
 202                 haikou_keys_pin: haikou-keys-pin {
 203                         rockchip,pins =
 204                           /* LID_BTN */
 205                           <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
 206                           /* BATLOW# */
 207                           <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
 208                           /* SLP_BTN# */
 209                           <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
 210                           /* WAKE# */
 211                           <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
 212                 };
 213         };
 214
 215         leds {
 216                 sd_card_led_pin: sd-card-led-pin {
 217                         rockchip,pins =
 218                           <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 219                 };
 220         };
 221
 222         usb2 {
 223                 otg_vbus_drv: otg-vbus-drv {
 224                         rockchip,pins =
 225                           <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 226                 };
 227         };
 228 };
 229
 230 &pwm0 {
 231         status = "okay";
 232 };
 233
 234 &sdmmc {
 235         bus-width = <4>;
 236         cap-mmc-highspeed;
 237         cap-sd-highspeed;
 238         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 239         disable-wp;
 240         max-frequency = <40000000>;
 241         pinctrl-names = "default";
 242         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 243         vmmc-supply = <&vcc3v3_baseboard>;
 244         status = "okay";
 245 };
 246
 247 &spi5 {
 248         status = "okay";
 249 };
 250
 251 &tcphy0 {
 252         status = "okay";
 253 };
 254
 255 &u2phy0 {
 256         status = "okay";
 257 };
 258
 259 &usbdrd3_0 {
 260         status = "okay";
 261 };
 262
 263 &usbdrd_dwc3_0 {
 264         dr_mode = "otg";
 265         extcon = <&extcon_usb3>;
 266         status = "okay";
 267 };
 268
 269 &u2phy0_host {
 270         phy-supply = <&vcc5v0_otg>;
 271         status = "okay";
 272 };
 273
 274 &uart0 {
 275         pinctrl-names = "default";
 276         pinctrl-0 = <&uart0_xfer>;
 277         status = "okay";
 278 };
 279
 280 &uart2 {
 281         rts-gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
 282         status = "okay";
 283 };
 284
 285 &usb_host0_ehci {
 286         status = "okay";
 287 };
 288
 289 &usb_host0_ohci {
 290         status = "okay";
 291 };
 292
 293 &vopb {
 294         status = "okay";
 295 };
 296
 297 &vopb_mmu {
 298         status = "okay";
 299 };
 300
 301 &vopl {
 302         status = "okay";
 303 };
 304
 305 &vopl_mmu {
 306         status = "okay";
 307 };