arch/arm64/boot/dts/renesas/salvator-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for common parts of Salvator-X board variants
   4  *
   5  * Copyright (C) 2015-2016 Renesas Electronics Corp.
   6  */
   7
   8 /*
   9  * SSI-AK4613
  10  *
  11  * This command is required when Playback/Capture
  12  *
  13  *      amixer set "DVC Out" 100%
  14  *      amixer set "DVC In" 100%
  15  *
  16  * You can use Mute
  17  *
  18  *      amixer set "DVC Out Mute" on
  19  *      amixer set "DVC In Mute" on
  20  *
  21  * You can use Volume Ramp
  22  *
  23  *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
  24  *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
  25  *      amixer set "DVC Out Ramp" on
  26  *      aplay xxx.wav &
  27  *      amixer set "DVC Out"  80%  // Volume Down
  28  *      amixer set "DVC Out" 100%  // Volume Up
  29  */
  30
  31 #include <dt-bindings/gpio/gpio.h>
  32 #include <dt-bindings/input/input.h>
  33
  34 / {
  35         aliases {
  36                 serial0 = &scif2;
  37                 serial1 = &hscif1;
  38                 ethernet0 = &avb;
  39                 mmc0 = &sdhi2;
  40                 mmc1 = &sdhi0;
  41                 mmc2 = &sdhi3;
  42         };
  43
  44         chosen {
  45                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  46                 stdout-path = "serial0:115200n8";
  47         };
  48
  49         audio_clkout: audio-clkout {
  50                 /*
  51                  * This is same as <&rcar_sound 0>
  52                  * but needed to avoid cs2000/rcar_sound probe dead-lock
  53                  */
  54                 compatible = "fixed-clock";
  55                 #clock-cells = <0>;
  56                 clock-frequency = <12288000>;
  57         };
  58
  59         backlight: backlight {
  60                 compatible = "pwm-backlight";
  61                 pwms = <&pwm1 0 50000>;
  62
  63                 brightness-levels = <256 128 64 16 8 4 0>;
  64                 default-brightness-level = <6>;
  65
  66                 power-supply = <&reg_12v>;
  67                 enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
  68         };
  69
  70         cvbs-in {
  71                 compatible = "composite-video-connector";
  72                 label = "CVBS IN";
  73
  74                 port {
  75                         cvbs_con: endpoint {
  76                                 remote-endpoint = <&adv7482_ain7>;
  77                         };
  78                 };
  79         };
  80
  81         hdmi-in {
  82                 compatible = "hdmi-connector";
  83                 label = "HDMI IN";
  84                 type = "a";
  85
  86                 port {
  87                         hdmi_in_con: endpoint {
  88                                 remote-endpoint = <&adv7482_hdmi>;
  89                         };
  90                 };
  91         };
  92
  93         hdmi0-out {
  94                 compatible = "hdmi-connector";
  95                 label = "HDMI0 OUT";
  96                 type = "a";
  97
  98                 port {
  99                         hdmi0_con: endpoint {
 100                         };
 101                 };
 102         };
 103
 104         hdmi1-out {
 105                 compatible = "hdmi-connector";
 106                 label = "HDMI1 OUT";
 107                 type = "a";
 108
 109                 port {
 110                         hdmi1_con: endpoint {
 111                         };
 112                 };
 113         };
 114
 115         keys {
 116                 compatible = "gpio-keys";
 117
 118                 pinctrl-0 = <&keys_pins>;
 119                 pinctrl-names = "default";
 120
 121                 key-1 {
 122                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 123                         linux,code = <KEY_1>;
 124                         label = "SW4-1";
 125                         wakeup-source;
 126                         debounce-interval = <20>;
 127                 };
 128                 key-2 {
 129                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
 130                         linux,code = <KEY_2>;
 131                         label = "SW4-2";
 132                         wakeup-source;
 133                         debounce-interval = <20>;
 134                 };
 135                 key-3 {
 136                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 137                         linux,code = <KEY_3>;
 138                         label = "SW4-3";
 139                         wakeup-source;
 140                         debounce-interval = <20>;
 141                 };
 142                 key-4 {
 143                         gpios = <&gpio5 23 GPIO_ACTIVE_LOW>;
 144                         linux,code = <KEY_4>;
 145                         label = "SW4-4";
 146                         wakeup-source;
 147                         debounce-interval = <20>;
 148                 };
 149                 key-a {
 150                         gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 151                         linux,code = <KEY_A>;
 152                         label = "TSW0";
 153                         wakeup-source;
 154                         debounce-interval = <20>;
 155                 };
 156                 key-b {
 157                         gpios = <&gpio6 12 GPIO_ACTIVE_LOW>;
 158                         linux,code = <KEY_B>;
 159                         label = "TSW1";
 160                         wakeup-source;
 161                         debounce-interval = <20>;
 162                 };
 163                 key-c {
 164                         gpios = <&gpio6 13 GPIO_ACTIVE_LOW>;
 165                         linux,code = <KEY_C>;
 166                         label = "TSW2";
 167                         wakeup-source;
 168                         debounce-interval = <20>;
 169                 };
 170         };
 171
 172         reg_1p8v: regulator0 {
 173                 compatible = "regulator-fixed";
 174                 regulator-name = "fixed-1.8V";
 175                 regulator-min-microvolt = <1800000>;
 176                 regulator-max-microvolt = <1800000>;
 177                 regulator-boot-on;
 178                 regulator-always-on;
 179         };
 180
 181         reg_3p3v: regulator1 {
 182                 compatible = "regulator-fixed";
 183                 regulator-name = "fixed-3.3V";
 184                 regulator-min-microvolt = <3300000>;
 185                 regulator-max-microvolt = <3300000>;
 186                 regulator-boot-on;
 187                 regulator-always-on;
 188         };
 189
 190         reg_12v: regulator2 {
 191                 compatible = "regulator-fixed";
 192                 regulator-name = "fixed-12V";
 193                 regulator-min-microvolt = <12000000>;
 194                 regulator-max-microvolt = <12000000>;
 195                 regulator-boot-on;
 196                 regulator-always-on;
 197         };
 198
 199         sound_card: sound {
 200                 compatible = "audio-graph-card";
 201
 202                 label = "rcar-sound";
 203
 204                 dais = <&rsnd_port0     /* ak4613 */
 205                         &rsnd_port1>;   /* HDMI0  */
 206         };
 207
 208         vbus0_usb2: regulator-vbus0-usb2 {
 209                 compatible = "regulator-fixed";
 210
 211                 regulator-name = "USB20_VBUS0";
 212                 regulator-min-microvolt = <5000000>;
 213                 regulator-max-microvolt = <5000000>;
 214
 215                 gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
 216                 enable-active-high;
 217         };
 218
 219         vcc_sdhi0: regulator-vcc-sdhi0 {
 220                 compatible = "regulator-fixed";
 221
 222                 regulator-name = "SDHI0 Vcc";
 223                 regulator-min-microvolt = <3300000>;
 224                 regulator-max-microvolt = <3300000>;
 225
 226                 gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 227                 enable-active-high;
 228         };
 229
 230         vccq_sdhi0: regulator-vccq-sdhi0 {
 231                 compatible = "regulator-gpio";
 232
 233                 regulator-name = "SDHI0 VccQ";
 234                 regulator-min-microvolt = <1800000>;
 235                 regulator-max-microvolt = <3300000>;
 236
 237                 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 238                 gpios-states = <1>;
 239                 states = <3300000 1>, <1800000 0>;
 240         };
 241
 242         vcc_sdhi3: regulator-vcc-sdhi3 {
 243                 compatible = "regulator-fixed";
 244
 245                 regulator-name = "SDHI3 Vcc";
 246                 regulator-min-microvolt = <3300000>;
 247                 regulator-max-microvolt = <3300000>;
 248
 249                 gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
 250                 enable-active-high;
 251         };
 252
 253         vccq_sdhi3: regulator-vccq-sdhi3 {
 254                 compatible = "regulator-gpio";
 255
 256                 regulator-name = "SDHI3 VccQ";
 257                 regulator-min-microvolt = <1800000>;
 258                 regulator-max-microvolt = <3300000>;
 259
 260                 gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
 261                 gpios-states = <1>;
 262                 states = <3300000 1>, <1800000 0>;
 263         };
 264
 265         vga {
 266                 compatible = "vga-connector";
 267
 268                 port {
 269                         vga_in: endpoint {
 270                                 remote-endpoint = <&adv7123_out>;
 271                         };
 272                 };
 273         };
 274
 275         vga-encoder {
 276                 compatible = "adi,adv7123";
 277
 278                 ports {
 279                         #address-cells = <1>;
 280                         #size-cells = <0>;
 281
 282                         port@0 {
 283                                 reg = <0>;
 284                                 adv7123_in: endpoint {
 285                                         remote-endpoint = <&du_out_rgb>;
 286                                 };
 287                         };
 288                         port@1 {
 289                                 reg = <1>;
 290                                 adv7123_out: endpoint {
 291                                         remote-endpoint = <&vga_in>;
 292                                 };
 293                         };
 294                 };
 295         };
 296
 297         x12_clk: x12 {
 298                 compatible = "fixed-clock";
 299                 #clock-cells = <0>;
 300                 clock-frequency = <24576000>;
 301         };
 302
 303         /* External DU dot clocks */
 304         x21_clk: x21-clock {
 305                 compatible = "fixed-clock";
 306                 #clock-cells = <0>;
 307                 clock-frequency = <33000000>;
 308         };
 309
 310         x22_clk: x22-clock {
 311                 compatible = "fixed-clock";
 312                 #clock-cells = <0>;
 313                 clock-frequency = <33000000>;
 314         };
 315
 316         x23_clk: x23-clock {
 317                 compatible = "fixed-clock";
 318                 #clock-cells = <0>;
 319                 clock-frequency = <25000000>;
 320         };
 321 };
 322
 323 &a57_0 {
 324         cpu-supply = <&dvfs>;
 325 };
 326
 327 &audio_clk_a {
 328         clock-frequency = <22579200>;
 329 };
 330
 331 &avb {
 332         pinctrl-0 = <&avb_pins>;
 333         pinctrl-names = "default";
 334         phy-handle = <&phy0>;
 335         tx-internal-delay-ps = <2000>;
 336         status = "okay";
 337
 338         phy0: ethernet-phy@0 {
 339                 rxc-skew-ps = <1500>;
 340                 reg = <0>;
 341                 interrupt-parent = <&gpio2>;
 342                 interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 343                 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
 344         };
 345 };
 346
 347 &csi20 {
 348         status = "okay";
 349
 350         ports {
 351                 port@0 {
 352                         csi20_in: endpoint {
 353                                 clock-lanes = <0>;
 354                                 data-lanes = <1>;
 355                                 remote-endpoint = <&adv7482_txb>;
 356                         };
 357                 };
 358         };
 359 };
 360
 361 &csi40 {
 362         status = "okay";
 363
 364         ports {
 365                 port@0 {
 366                         csi40_in: endpoint {
 367                                 clock-lanes = <0>;
 368                                 data-lanes = <1 2 3 4>;
 369                                 remote-endpoint = <&adv7482_txa>;
 370                         };
 371                 };
 372         };
 373 };
 374
 375 &du {
 376         pinctrl-0 = <&du_pins>;
 377         pinctrl-names = "default";
 378         status = "okay";
 379
 380         ports {
 381                 port@0 {
 382                         endpoint {
 383                                 remote-endpoint = <&adv7123_in>;
 384                         };
 385                 };
 386         };
 387 };
 388
 389 &ehci0 {
 390         dr_mode = "otg";
 391         status = "okay";
 392 };
 393
 394 &ehci1 {
 395         status = "okay";
 396 };
 397
 398 &extalr_clk {
 399         clock-frequency = <32768>;
 400 };
 401
 402 &hdmi0 {
 403         status = "okay";
 404
 405         ports {
 406                 port@1 {
 407                         reg = <1>;
 408                         rcar_dw_hdmi0_out: endpoint {
 409                                 remote-endpoint = <&hdmi0_con>;
 410                         };
 411                 };
 412                 port@2 {
 413                         reg = <2>;
 414                         dw_hdmi0_snd_in: endpoint {
 415                                 remote-endpoint = <&rsnd_endpoint1>;
 416                         };
 417                 };
 418         };
 419 };
 420
 421 &hdmi0_con {
 422         remote-endpoint = <&rcar_dw_hdmi0_out>;
 423 };
 424
 425 &hscif1 {
 426         pinctrl-0 = <&hscif1_pins>;
 427         pinctrl-names = "default";
 428
 429         uart-has-rtscts;
 430         /* Please only enable hscif1 or scif1 */
 431         status = "okay";
 432 };
 433
 434 &hsusb {
 435         dr_mode = "otg";
 436         status = "okay";
 437 };
 438
 439 &i2c2 {
 440         pinctrl-0 = <&i2c2_pins>;
 441         pinctrl-names = "default";
 442
 443         status = "okay";
 444
 445         clock-frequency = <100000>;
 446
 447         ak4613: codec@10 {
 448                 compatible = "asahi-kasei,ak4613";
 449                 #sound-dai-cells = <0>;
 450                 reg = <0x10>;
 451                 clocks = <&rcar_sound 3>;
 452
 453                 asahi-kasei,in1-single-end;
 454                 asahi-kasei,in2-single-end;
 455                 asahi-kasei,out1-single-end;
 456                 asahi-kasei,out2-single-end;
 457                 asahi-kasei,out3-single-end;
 458                 asahi-kasei,out4-single-end;
 459                 asahi-kasei,out5-single-end;
 460                 asahi-kasei,out6-single-end;
 461
 462                 port {
 463                         ak4613_endpoint: endpoint {
 464                                 remote-endpoint = <&rsnd_endpoint0>;
 465                         };
 466                 };
 467         };
 468
 469         cs2000: clk_multiplier@4f {
 470                 #clock-cells = <0>;
 471                 compatible = "cirrus,cs2000-cp";
 472                 reg = <0x4f>;
 473                 clocks = <&audio_clkout>, <&x12_clk>;
 474                 clock-names = "clk_in", "ref_clk";
 475
 476                 assigned-clocks = <&cs2000>;
 477                 assigned-clock-rates = <24576000>; /* 1/1 divide */
 478         };
 479 };
 480
 481 &i2c4 {
 482         status = "okay";
 483
 484         pca9654: gpio@20 {
 485                 compatible = "onnn,pca9654";
 486                 reg = <0x20>;
 487                 gpio-controller;
 488                 #gpio-cells = <2>;
 489         };
 490
 491         video-receiver@70 {
 492                 compatible = "adi,adv7482";
 493                 reg = <0x70 0x71 0x72 0x73 0x74 0x75
 494                        0x60 0x61 0x62 0x63 0x64 0x65>;
 495                 reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
 496                             "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
 497
 498                 #address-cells = <1>;
 499                 #size-cells = <0>;
 500
 501                 interrupt-parent = <&gpio6>;
 502                 interrupt-names = "intrq1", "intrq2";
 503                 interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
 504                              <31 IRQ_TYPE_LEVEL_LOW>;
 505
 506                 port@7 {
 507                         reg = <7>;
 508
 509                         adv7482_ain7: endpoint {
 510                                 remote-endpoint = <&cvbs_con>;
 511                         };
 512                 };
 513
 514                 port@8 {
 515                         reg = <8>;
 516
 517                         adv7482_hdmi: endpoint {
 518                                 remote-endpoint = <&hdmi_in_con>;
 519                         };
 520                 };
 521
 522                 port@a {
 523                         reg = <10>;
 524
 525                         adv7482_txa: endpoint {
 526                                 clock-lanes = <0>;
 527                                 data-lanes = <1 2 3 4>;
 528                                 remote-endpoint = <&csi40_in>;
 529                         };
 530                 };
 531
 532                 port@b {
 533                         reg = <11>;
 534
 535                         adv7482_txb: endpoint {
 536                                 clock-lanes = <0>;
 537                                 data-lanes = <1>;
 538                                 remote-endpoint = <&csi20_in>;
 539                         };
 540                 };
 541         };
 542
 543         csa_vdd: adc@7c {
 544                 compatible = "maxim,max9611";
 545                 reg = <0x7c>;
 546
 547                 shunt-resistor-micro-ohms = <5000>;
 548         };
 549
 550         csa_dvfs: adc@7f {
 551                 compatible = "maxim,max9611";
 552                 reg = <0x7f>;
 553
 554                 shunt-resistor-micro-ohms = <5000>;
 555         };
 556 };
 557
 558 &i2c_dvfs {
 559         status = "okay";
 560
 561         clock-frequency = <400000>;
 562
 563         pmic: pmic@30 {
 564                 pinctrl-0 = <&irq0_pins>;
 565                 pinctrl-names = "default";
 566
 567                 compatible = "rohm,bd9571mwv";
 568                 reg = <0x30>;
 569                 interrupt-parent = <&intc_ex>;
 570                 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 571                 interrupt-controller;
 572                 #interrupt-cells = <2>;
 573                 gpio-controller;
 574                 #gpio-cells = <2>;
 575                 rohm,ddr-backup-power = <0xf>;
 576                 rohm,rstbmode-level;
 577
 578                 regulators {
 579                         dvfs: dvfs {
 580                                 regulator-name = "dvfs";
 581                                 regulator-min-microvolt = <750000>;
 582                                 regulator-max-microvolt = <1030000>;
 583                                 regulator-boot-on;
 584                                 regulator-always-on;
 585                         };
 586                 };
 587         };
 588
 589         eeprom@50 {
 590                 compatible = "rohm,br24t01", "atmel,24c01";
 591                 reg = <0x50>;
 592                 pagesize = <8>;
 593         };
 594 };
 595
 596 &ohci0 {
 597         dr_mode = "otg";
 598         status = "okay";
 599 };
 600
 601 &ohci1 {
 602         status = "okay";
 603 };
 604
 605 &pcie_bus_clk {
 606         clock-frequency = <100000000>;
 607 };
 608
 609 &pciec0 {
 610         status = "okay";
 611 };
 612
 613 &pciec1 {
 614         status = "okay";
 615 };
 616
 617 &pfc {
 618         pinctrl-0 = <&scif_clk_pins>;
 619         pinctrl-names = "default";
 620
 621         avb_pins: avb {
 622                 mux {
 623                         groups = "avb_link", "avb_mdio", "avb_mii";
 624                         function = "avb";
 625                 };
 626
 627                 pins_mdio {
 628                         groups = "avb_mdio";
 629                         drive-strength = <24>;
 630                 };
 631
 632                 pins_mii_tx {
 633                         pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
 634                                "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
 635                         drive-strength = <12>;
 636                 };
 637         };
 638
 639         du_pins: du {
 640                 groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
 641                 function = "du";
 642         };
 643
 644         hscif1_pins: hscif1 {
 645                 groups = "hscif1_data_a", "hscif1_ctrl_a";
 646                 function = "hscif1";
 647         };
 648
 649         i2c2_pins: i2c2 {
 650                 groups = "i2c2_a";
 651                 function = "i2c2";
 652         };
 653
 654         irq0_pins: irq0 {
 655                 groups = "intc_ex_irq0";
 656                 function = "intc_ex";
 657         };
 658
 659         keys_pins: keys {
 660                 pins = "GP_5_17", "GP_5_20", "GP_5_22";
 661                 bias-pull-up;
 662         };
 663
 664         pwm1_pins: pwm1 {
 665                 groups = "pwm1_a";
 666                 function = "pwm1";
 667         };
 668
 669         scif1_pins: scif1 {
 670                 groups = "scif1_data_a", "scif1_ctrl";
 671                 function = "scif1";
 672         };
 673
 674         scif2_pins: scif2 {
 675                 groups = "scif2_data_a";
 676                 function = "scif2";
 677         };
 678
 679         scif_clk_pins: scif_clk {
 680                 groups = "scif_clk_a";
 681                 function = "scif_clk";
 682         };
 683
 684         sdhi0_pins: sd0 {
 685                 groups = "sdhi0_data4", "sdhi0_ctrl";
 686                 function = "sdhi0";
 687                 power-source = <3300>;
 688         };
 689
 690         sdhi0_pins_uhs: sd0_uhs {
 691                 groups = "sdhi0_data4", "sdhi0_ctrl";
 692                 function = "sdhi0";
 693                 power-source = <1800>;
 694         };
 695
 696         sdhi2_pins: sd2 {
 697                 groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
 698                 function = "sdhi2";
 699                 power-source = <1800>;
 700         };
 701
 702         sdhi3_pins: sd3 {
 703                 groups = "sdhi3_data4", "sdhi3_ctrl";
 704                 function = "sdhi3";
 705                 power-source = <3300>;
 706         };
 707
 708         sdhi3_pins_uhs: sd3_uhs {
 709                 groups = "sdhi3_data4", "sdhi3_ctrl";
 710                 function = "sdhi3";
 711                 power-source = <1800>;
 712         };
 713
 714         sound_pins: sound {
 715                 groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 716                 function = "ssi";
 717         };
 718
 719         sound_clk_pins: sound_clk {
 720                 groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
 721                          "audio_clkout_a", "audio_clkout3_a";
 722                 function = "audio_clk";
 723         };
 724
 725         usb0_pins: usb0 {
 726                 groups = "usb0";
 727                 function = "usb0";
 728         };
 729
 730         usb1_pins: usb1 {
 731                 mux {
 732                         groups = "usb1";
 733                         function = "usb1";
 734                 };
 735
 736                 ovc {
 737                         pins = "GP_6_27";
 738                         bias-pull-up;
 739                 };
 740
 741                 pwen {
 742                         pins = "GP_6_26";
 743                         bias-pull-down;
 744                 };
 745         };
 746
 747         usb30_pins: usb30 {
 748                 groups = "usb30";
 749                 function = "usb30";
 750         };
 751 };
 752
 753 &pwm1 {
 754         pinctrl-0 = <&pwm1_pins>;
 755         pinctrl-names = "default";
 756
 757         status = "okay";
 758 };
 759
 760 &rcar_sound {
 761         pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
 762         pinctrl-names = "default";
 763
 764         /* Single DAI */
 765         #sound-dai-cells = <0>;
 766
 767         /* audio_clkout0/1/2/3 */
 768         #clock-cells = <1>;
 769         clock-frequency = <12288000 11289600>;
 770
 771         status = "okay";
 772
 773         /* update <audio_clk_b> to <cs2000> */
 774         clocks = <&cpg CPG_MOD 1005>,
 775                  <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
 776                  <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
 777                  <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
 778                  <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
 779                  <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
 780                  <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
 781                  <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
 782                  <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
 783                  <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
 784                  <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
 785                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 786                  <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 787                  <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 788                  <&audio_clk_a>, <&cs2000>,
 789                  <&audio_clk_c>,
 790                  <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
 791
 792         ports {
 793                 #address-cells = <1>;
 794                 #size-cells = <0>;
 795                 rsnd_port0: port@0 {
 796                         reg = <0>;
 797                         rsnd_endpoint0: endpoint {
 798                                 remote-endpoint = <&ak4613_endpoint>;
 799
 800                                 dai-format = "left_j";
 801                                 bitclock-master = <&rsnd_endpoint0>;
 802                                 frame-master = <&rsnd_endpoint0>;
 803
 804                                 playback = <&ssi0>, <&src0>, <&dvc0>;
 805                                 capture  = <&ssi1>, <&src1>, <&dvc1>;
 806                         };
 807                 };
 808
 809                 rsnd_port1: port@1 {
 810                         reg = <1>;
 811                         rsnd_endpoint1: endpoint {
 812                                 remote-endpoint = <&dw_hdmi0_snd_in>;
 813
 814                                 dai-format = "i2s";
 815                                 bitclock-master = <&rsnd_endpoint1>;
 816                                 frame-master = <&rsnd_endpoint1>;
 817
 818                                 playback = <&ssi2>;
 819                         };
 820                 };
 821         };
 822 };
 823
 824 &rwdt {
 825         timeout-sec = <60>;
 826         status = "okay";
 827 };
 828
 829 &scif1 {
 830         pinctrl-0 = <&scif1_pins>;
 831         pinctrl-names = "default";
 832
 833         uart-has-rtscts;
 834         /* Please only enable hscif1 or scif1 */
 835         /* status = "okay"; */
 836 };
 837
 838 &scif2 {
 839         pinctrl-0 = <&scif2_pins>;
 840         pinctrl-names = "default";
 841
 842         status = "okay";
 843 };
 844
 845 &scif_clk {
 846         clock-frequency = <14745600>;
 847 };
 848
 849 &sdhi0 {
 850         pinctrl-0 = <&sdhi0_pins>;
 851         pinctrl-1 = <&sdhi0_pins_uhs>;
 852         pinctrl-names = "default", "state_uhs";
 853
 854         vmmc-supply = <&vcc_sdhi0>;
 855         vqmmc-supply = <&vccq_sdhi0>;
 856         cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 857         wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 858         bus-width = <4>;
 859         sd-uhs-sdr50;
 860         sd-uhs-sdr104;
 861         status = "okay";
 862 };
 863
 864 &sdhi2 {
 865         /* used for on-board 8bit eMMC */
 866         pinctrl-0 = <&sdhi2_pins>;
 867         pinctrl-1 = <&sdhi2_pins>;
 868         pinctrl-names = "default", "state_uhs";
 869
 870         vmmc-supply = <&reg_3p3v>;
 871         vqmmc-supply = <&reg_1p8v>;
 872         bus-width = <8>;
 873         mmc-hs200-1_8v;
 874         mmc-hs400-1_8v;
 875         no-sd;
 876         no-sdio;
 877         non-removable;
 878         fixed-emmc-driver-type = <1>;
 879         full-pwr-cycle-in-suspend;
 880         status = "okay";
 881 };
 882
 883 &sdhi3 {
 884         pinctrl-0 = <&sdhi3_pins>;
 885         pinctrl-1 = <&sdhi3_pins_uhs>;
 886         pinctrl-names = "default", "state_uhs";
 887
 888         vmmc-supply = <&vcc_sdhi3>;
 889         vqmmc-supply = <&vccq_sdhi3>;
 890         cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 891         wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 892         bus-width = <4>;
 893         sd-uhs-sdr50;
 894         sd-uhs-sdr104;
 895         status = "okay";
 896 };
 897
 898 &ssi1 {
 899         shared-pin;
 900 };
 901
 902 &usb_extal_clk {
 903         clock-frequency = <50000000>;
 904 };
 905
 906 &usb2_phy0 {
 907         pinctrl-0 = <&usb0_pins>;
 908         pinctrl-names = "default";
 909
 910         vbus-supply = <&vbus0_usb2>;
 911         status = "okay";
 912 };
 913
 914 &usb2_phy1 {
 915         pinctrl-0 = <&usb1_pins>;
 916         pinctrl-names = "default";
 917
 918         status = "okay";
 919 };
 920
 921 &usb3_peri0 {
 922         phys = <&usb3_phy0>;
 923         phy-names = "usb";
 924
 925         companion = <&xhci0>;
 926
 927         status = "okay";
 928 };
 929
 930 &usb3_phy0 {
 931         status = "okay";
 932 };
 933
 934 &usb3s0_clk {
 935         clock-frequency = <100000000>;
 936 };
 937
 938 &vin0 {
 939         status = "okay";
 940 };
 941
 942 &vin1 {
 943         status = "okay";
 944 };
 945
 946 &vin2 {
 947         status = "okay";
 948 };
 949
 950 &vin3 {
 951         status = "okay";
 952 };
 953
 954 &vin4 {
 955         status = "okay";
 956 };
 957
 958 &vin5 {
 959         status = "okay";
 960 };
 961
 962 &vin6 {
 963         status = "okay";
 964 };
 965
 966 &vin7 {
 967         status = "okay";
 968 };
 969
 970 &xhci0 {
 971         pinctrl-0 = <&usb30_pins>;
 972         pinctrl-names = "default";
 973
 974         status = "okay";
 975 };