arch/arm64/boot/dts/qcom/sm8250-mtp.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   9 #include <dt-bindings/sound/qcom,q6afe.h>
  10 #include <dt-bindings/sound/qcom,q6asm.h>
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include "sm8250.dtsi"
  13 #include "pm8150.dtsi"
  14 #include "pm8150b.dtsi"
  15 #include "pm8150l.dtsi"
  16 #include "pm8009.dtsi"
  17
  18 / {
  19         model = "Qualcomm Technologies, Inc. SM8250 MTP";
  20         compatible = "qcom,sm8250-mtp", "qcom,sm8250";
  21         chassis-type = "handset";
  22
  23         aliases {
  24                 serial0 = &uart12;
  25         };
  26
  27         wcd938x: audio-codec {
  28                 compatible = "qcom,wcd9380-codec";
  29
  30                 reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
  31
  32                 vdd-buck-supply = <&vreg_s4a_1p8>;
  33                 vdd-rxtx-supply = <&vreg_s4a_1p8>;
  34                 vdd-io-supply = <&vreg_s4a_1p8>;
  35                 vdd-mic-bias-supply = <&vreg_bob>;
  36
  37                 qcom,micbias1-microvolt = <1800000>;
  38                 qcom,micbias2-microvolt = <1800000>;
  39                 qcom,micbias3-microvolt = <1800000>;
  40                 qcom,micbias4-microvolt = <1800000>;
  41                 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
  42                 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
  43                 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
  44                 qcom,rx-device = <&wcd_rx>;
  45                 qcom,tx-device = <&wcd_tx>;
  46
  47                 #sound-dai-cells = <1>;
  48         };
  49
  50         chosen {
  51                 stdout-path = "serial0:115200n8";
  52         };
  53
  54         thermal-zones {
  55                 camera-thermal {
  56                         polling-delay-passive = <0>;
  57                         polling-delay = <0>;
  58                         thermal-sensors = <&pm8150l_adc_tm 0>;
  59
  60                         trips {
  61                                 active-config0 {
  62                                         temperature = <125000>;
  63                                         hysteresis = <1000>;
  64                                         type = "passive";
  65                                 };
  66                         };
  67                 };
  68
  69                 conn-thermal {
  70                         polling-delay-passive = <0>;
  71                         polling-delay = <0>;
  72                         thermal-sensors = <&pm8150b_adc_tm 0>;
  73
  74                         trips {
  75                                 active-config0 {
  76                                         temperature = <125000>;
  77                                         hysteresis = <1000>;
  78                                         type = "passive";
  79                                 };
  80                         };
  81                 };
  82
  83                 mmw-pa1-thermal {
  84                         polling-delay-passive = <0>;
  85                         polling-delay = <0>;
  86                         thermal-sensors = <&pm8150_adc_tm 2>;
  87
  88                         trips {
  89                                 active-config0 {
  90                                         temperature = <125000>;
  91                                         hysteresis = <1000>;
  92                                         type = "passive";
  93                                 };
  94                         };
  95                 };
  96
  97                 mmw-pa2-thermal {
  98                         polling-delay-passive = <0>;
  99                         polling-delay = <0>;
 100                         thermal-sensors = <&pm8150l_adc_tm 2>;
 101
 102                         trips {
 103                                 active-config0 {
 104                                         temperature = <125000>;
 105                                         hysteresis = <1000>;
 106                                         type = "passive";
 107                                 };
 108                         };
 109                 };
 110
 111                 skin-msm-thermal {
 112                         polling-delay-passive = <0>;
 113                         polling-delay = <0>;
 114                         thermal-sensors = <&pm8150l_adc_tm 1>;
 115
 116                         trips {
 117                                 active-config0 {
 118                                         temperature = <125000>;
 119                                         hysteresis = <1000>;
 120                                         type = "passive";
 121                                 };
 122                         };
 123                 };
 124
 125                 skin-thermal {
 126                         polling-delay-passive = <0>;
 127                         polling-delay = <0>;
 128                         thermal-sensors = <&pm8150_adc_tm 1>;
 129
 130                         trips {
 131                                 active-config0 {
 132                                         temperature = <125000>;
 133                                         hysteresis = <1000>;
 134                                         type = "passive";
 135                                 };
 136                         };
 137                 };
 138
 139                 xo-thermal {
 140                         polling-delay-passive = <0>;
 141                         polling-delay = <0>;
 142                         thermal-sensors = <&pm8150_adc_tm 0>;
 143
 144                         trips {
 145                                 active-config0 {
 146                                         temperature = <125000>;
 147                                         hysteresis = <1000>;
 148                                         type = "passive";
 149                                 };
 150                         };
 151                 };
 152         };
 153
 154         vph_pwr: vph-pwr-regulator {
 155                 compatible = "regulator-fixed";
 156                 regulator-name = "vph_pwr";
 157                 regulator-min-microvolt = <3700000>;
 158                 regulator-max-microvolt = <3700000>;
 159         };
 160
 161         vreg_s4a_1p8: pm8150-s4 {
 162                 compatible = "regulator-fixed";
 163                 regulator-name = "vreg_s4a_1p8";
 164
 165                 regulator-min-microvolt = <1800000>;
 166                 regulator-max-microvolt = <1800000>;
 167
 168                 regulator-always-on;
 169                 regulator-boot-on;
 170
 171                 vin-supply = <&vph_pwr>;
 172         };
 173
 174         vreg_s6c_0p88: smpc6-regulator {
 175                 compatible = "regulator-fixed";
 176                 regulator-name = "vreg_s6c_0p88";
 177
 178                 regulator-min-microvolt = <880000>;
 179                 regulator-max-microvolt = <880000>;
 180                 regulator-always-on;
 181                 vin-supply = <&vph_pwr>;
 182         };
 183 };
 184
 185 &adsp {
 186         status = "okay";
 187         firmware-name = "qcom/sm8250/adsp.mbn";
 188 };
 189
 190 &apps_rsc {
 191         regulators-0 {
 192                 compatible = "qcom,pm8150-rpmh-regulators";
 193                 qcom,pmic-id = "a";
 194
 195                 vdd-s1-supply = <&vph_pwr>;
 196                 vdd-s2-supply = <&vph_pwr>;
 197                 vdd-s3-supply = <&vph_pwr>;
 198                 vdd-s4-supply = <&vph_pwr>;
 199                 vdd-s5-supply = <&vph_pwr>;
 200                 vdd-s6-supply = <&vph_pwr>;
 201                 vdd-s7-supply = <&vph_pwr>;
 202                 vdd-s8-supply = <&vph_pwr>;
 203                 vdd-s9-supply = <&vph_pwr>;
 204                 vdd-s10-supply = <&vph_pwr>;
 205                 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
 206                 vdd-l2-l10-supply = <&vreg_bob>;
 207                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 208                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 209                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 210                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 211
 212                 vreg_s5a_1p9: smps5 {
 213                         regulator-name = "vreg_s5a_1p9";
 214                         regulator-min-microvolt = <1904000>;
 215                         regulator-max-microvolt = <2000000>;
 216                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 217                 };
 218
 219                 vreg_s6a_0p95: smps6 {
 220                         regulator-name = "vreg_s6a_0p95";
 221                         regulator-min-microvolt = <920000>;
 222                         regulator-max-microvolt = <1128000>;
 223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 224                 };
 225
 226                 vreg_l2a_3p1: ldo2 {
 227                         regulator-name = "vreg_l2a_3p1";
 228                         regulator-min-microvolt = <3072000>;
 229                         regulator-max-microvolt = <3072000>;
 230                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 231                 };
 232
 233                 vreg_l3a_0p9: ldo3 {
 234                         regulator-name = "vreg_l3a_0p9";
 235                         regulator-min-microvolt = <928000>;
 236                         regulator-max-microvolt = <932000>;
 237                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 238                 };
 239
 240                 vreg_l5a_0p875: ldo5 {
 241                         regulator-name = "vreg_l5a_0p875";
 242                         regulator-min-microvolt = <880000>;
 243                         regulator-max-microvolt = <880000>;
 244                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 245                 };
 246
 247                 vreg_l6a_1p2: ldo6 {
 248                         regulator-name = "vreg_l6a_1p2";
 249                         regulator-min-microvolt = <1200000>;
 250                         regulator-max-microvolt = <1200000>;
 251                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 252                 };
 253
 254                 vreg_l7a_1p7: ldo7 {
 255                         regulator-name = "vreg_l7a_1p7";
 256                         regulator-min-microvolt = <1704000>;
 257                         regulator-max-microvolt = <1800000>;
 258                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 259                 };
 260
 261                 vreg_l9a_1p2: ldo9 {
 262                         regulator-name = "vreg_l9a_1p2";
 263                         regulator-min-microvolt = <1200000>;
 264                         regulator-max-microvolt = <1200000>;
 265                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 266                 };
 267
 268                 vreg_l10a_1p8: ldo10 {
 269                         regulator-name = "vreg_l10a_1p8";
 270                         regulator-min-microvolt = <1800000>;
 271                         regulator-max-microvolt = <1800000>;
 272                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 273                 };
 274
 275                 vreg_l12a_1p8: ldo12 {
 276                         regulator-name = "vreg_l12a_1p8";
 277                         regulator-min-microvolt = <1800000>;
 278                         regulator-max-microvolt = <1800000>;
 279                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 280                 };
 281
 282                 vreg_l13a_ts_3p0: ldo13 {
 283                         regulator-name = "vreg_l13a_ts_3p0";
 284                         regulator-min-microvolt = <3008000>;
 285                         regulator-max-microvolt = <3008000>;
 286                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 287                 };
 288
 289                 vreg_l14a_1p8: ldo14 {
 290                         regulator-name = "vreg_l14a_1p8";
 291                         regulator-min-microvolt = <1800000>;
 292                         regulator-max-microvolt = <1880000>;
 293                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 294                 };
 295
 296                 vreg_l15a_11ad_io_1p8: ldo15 {
 297                         regulator-name = "vreg_l15a_11ad_io_1p8";
 298                         regulator-min-microvolt = <1800000>;
 299                         regulator-max-microvolt = <1800000>;
 300                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 301                 };
 302
 303                 vreg_l16a_2p7: ldo16 {
 304                         regulator-name = "vreg_l16a_2p7";
 305                         regulator-min-microvolt = <2704000>;
 306                         regulator-max-microvolt = <2960000>;
 307                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 308                 };
 309
 310                 vreg_l17a_3p0: ldo17 {
 311                         regulator-name = "vreg_l17a_3p0";
 312                         regulator-min-microvolt = <2856000>;
 313                         regulator-max-microvolt = <3008000>;
 314                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 315                 };
 316
 317                 vreg_l18a_0p9: ldo18 {
 318                         regulator-name = "vreg_l18a_0p9";
 319                         regulator-min-microvolt = <912000>;
 320                         regulator-max-microvolt = <912000>;
 321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 322                 };
 323         };
 324
 325         regulators-1 {
 326                 compatible = "qcom,pm8150l-rpmh-regulators";
 327                 qcom,pmic-id = "c";
 328
 329                 vdd-s1-supply = <&vph_pwr>;
 330                 vdd-s2-supply = <&vph_pwr>;
 331                 vdd-s3-supply = <&vph_pwr>;
 332                 vdd-s4-supply = <&vph_pwr>;
 333                 vdd-s5-supply = <&vph_pwr>;
 334                 vdd-s6-supply = <&vph_pwr>;
 335                 vdd-s7-supply = <&vph_pwr>;
 336                 vdd-s8-supply = <&vph_pwr>;
 337                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 338                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 339                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 340                 vdd-l7-l11-supply = <&vreg_bob>;
 341                 vdd-l9-l10-supply = <&vreg_bob>;
 342                 vdd-bob-supply = <&vph_pwr>;
 343
 344                 vreg_bob: bob {
 345                         regulator-name = "vreg_bob";
 346                         regulator-min-microvolt = <3008000>;
 347                         regulator-max-microvolt = <4000000>;
 348                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 349                 };
 350
 351                 vreg_s8c_1p3: smps8 {
 352                         regulator-name = "vreg_s8c_1p3";
 353                         regulator-min-microvolt = <1352000>;
 354                         regulator-max-microvolt = <1352000>;
 355                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 356                 };
 357
 358                 vreg_l1c_1p8: ldo1 {
 359                         regulator-name = "vreg_l1c_1p8";
 360                         regulator-min-microvolt = <1800000>;
 361                         regulator-max-microvolt = <1800000>;
 362                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 363                 };
 364
 365                 vreg_l2c_1p2: ldo2 {
 366                         regulator-name = "vreg_l2c_1p2";
 367                         regulator-min-microvolt = <1200000>;
 368                         regulator-max-microvolt = <1200000>;
 369                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 370                 };
 371
 372                 vreg_l3c_0p92: ldo3 {
 373                         regulator-name = "vreg_l3c_0p92";
 374                         regulator-min-microvolt = <920000>;
 375                         regulator-max-microvolt = <920000>;
 376                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 377                 };
 378
 379                 vreg_l4c_1p7: ldo4 {
 380                         regulator-name = "vreg_l4c_1p7";
 381                         regulator-min-microvolt = <1704000>;
 382                         regulator-max-microvolt = <2928000>;
 383                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 384                 };
 385
 386                 vreg_l5c_1p8: ldo5 {
 387                         regulator-name = "vreg_l5c_1p8";
 388                         regulator-min-microvolt = <1800000>;
 389                         regulator-max-microvolt = <2928000>;
 390                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 391                 };
 392
 393                 vreg_l6c_2p9: ldo6 {
 394                         regulator-name = "vreg_l6c_2p9";
 395                         regulator-min-microvolt = <1800000>;
 396                         regulator-max-microvolt = <2960000>;
 397                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 398                 };
 399
 400                 vreg_l7c_cam_vcm0_2p85: ldo7 {
 401                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
 402                         regulator-min-microvolt = <2856000>;
 403                         regulator-max-microvolt = <3104000>;
 404                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 405                 };
 406
 407                 vreg_l8c_1p8: ldo8 {
 408                         regulator-name = "vreg_l8c_1p8";
 409                         regulator-min-microvolt = <1800000>;
 410                         regulator-max-microvolt = <1800000>;
 411                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 412                 };
 413
 414                 vreg_l9c_2p9: ldo9 {
 415                         regulator-name = "vreg_l9c_2p9";
 416                         regulator-min-microvolt = <2704000>;
 417                         regulator-max-microvolt = <2960000>;
 418                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 419                 };
 420
 421                 vreg_l10c_3p0: ldo10 {
 422                         regulator-name = "vreg_l10c_3p0";
 423                         regulator-min-microvolt = <3000000>;
 424                         regulator-max-microvolt = <3000000>;
 425                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 426                 };
 427
 428                 vreg_l11c_3p3: ldo11 {
 429                         regulator-name = "vreg_l11c_3p3";
 430                         regulator-min-microvolt = <3000000>;
 431                         regulator-max-microvolt = <3312000>;
 432                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 433                 };
 434         };
 435
 436         regulators-2 {
 437                 compatible = "qcom,pm8009-rpmh-regulators";
 438                 qcom,pmic-id = "f";
 439
 440                 vdd-s1-supply = <&vph_pwr>;
 441                 vdd-s2-supply = <&vreg_bob>;
 442                 vdd-l2-supply = <&vreg_s8c_1p3>;
 443                 vdd-l5-l6-supply = <&vreg_bob>;
 444                 vdd-l7-supply = <&vreg_s4a_1p8>;
 445
 446                 vreg_l1f_cam_dvdd1_1p1: ldo1 {
 447                         regulator-name = "vreg_l1f_cam_dvdd1_1p1";
 448                         regulator-min-microvolt = <1104000>;
 449                         regulator-max-microvolt = <1104000>;
 450                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 451                 };
 452
 453                 vreg_l2f_cam_dvdd0_1p2: ldo2 {
 454                         regulator-name = "vreg_l2f_cam_dvdd0_1p2";
 455                         regulator-min-microvolt = <1200000>;
 456                         regulator-max-microvolt = <1200000>;
 457                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 458                 };
 459
 460                 vreg_l3f_cam_dvdd2_1p05: ldo3 {
 461                         regulator-name = "vreg_l3f_cam_dvdd2_1p05";
 462                         regulator-min-microvolt = <1056000>;
 463                         regulator-max-microvolt = <1056000>;
 464                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 465                 };
 466
 467                 vreg_l5f_cam_avdd0_2p85: ldo5 {
 468                         regulator-name = "vreg_l5f_cam_avdd0_2p85";
 469                         regulator-min-microvolt = <2800000>;
 470                         regulator-max-microvolt = <2800000>;
 471                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 472                 };
 473
 474                 vreg_l6f_cam_avdd1_2p85: ldo6 {
 475                         regulator-name = "vreg_l6f_cam_avdd1_2p85";
 476                         regulator-min-microvolt = <2856000>;
 477                         regulator-max-microvolt = <2856000>;
 478                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 479                 };
 480
 481                 vreg_l7f_1p8: ldo7 {
 482                         regulator-name = "vreg_l7f_1p8";
 483                         regulator-min-microvolt = <1800000>;
 484                         regulator-max-microvolt = <1800000>;
 485                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 486                 };
 487         };
 488 };
 489
 490 &cdsp {
 491         status = "okay";
 492         firmware-name = "qcom/sm8250/cdsp.mbn";
 493 };
 494
 495 &gmu {
 496         status = "okay";
 497 };
 498
 499 &gpu {
 500         status = "okay";
 501
 502         zap-shader {
 503                 memory-region = <&gpu_mem>;
 504                 firmware-name = "qcom/sm8250/a650_zap.mbn";
 505         };
 506 };
 507
 508 &i2c1 {
 509         status = "okay";
 510         clock-frequency = <1000000>;
 511
 512         /* NQ NFC chip @28 */
 513 };
 514
 515 &i2c13 {
 516         status = "okay";
 517
 518         /* st,stmfts @ 49 */
 519 };
 520
 521 &i2c15 {
 522         status = "okay";
 523
 524         /* smb1390 @ 10 */
 525         /* rtc6226 @ 64 */
 526 };
 527
 528 &pm8150_adc {
 529         channel@4c {
 530                 reg = <ADC5_XO_THERM_100K_PU>;
 531                 qcom,ratiometric;
 532                 qcom,hw-settle-time = <200>;
 533                 label = "xo_therm";
 534         };
 535
 536         channel@4d {
 537                 reg = <ADC5_AMUX_THM1_100K_PU>;
 538                 qcom,ratiometric;
 539                 qcom,hw-settle-time = <200>;
 540                 label = "skin_therm";
 541         };
 542
 543         channel@4e {
 544                 reg = <ADC5_AMUX_THM2_100K_PU>;
 545                 qcom,ratiometric;
 546                 qcom,hw-settle-time = <200>;
 547                 label = "pa_therm1";
 548         };
 549 };
 550
 551 &pm8150_adc_tm {
 552         status = "okay";
 553
 554         xo-therm@0 {
 555                 reg = <0>;
 556                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
 557                 qcom,ratiometric;
 558                 qcom,hw-settle-time-us = <200>;
 559         };
 560
 561         skin-therm@1 {
 562                 reg = <1>;
 563                 io-channels = <&pm8150_adc ADC5_AMUX_THM1_100K_PU>;
 564                 qcom,ratiometric;
 565                 qcom,hw-settle-time-us = <200>;
 566         };
 567
 568         pa-therm1@2 {
 569                 reg = <2>;
 570                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
 571                 qcom,ratiometric;
 572                 qcom,hw-settle-time-us = <200>;
 573         };
 574 };
 575
 576 &pm8150b_adc {
 577         channel@4f {
 578                 reg = <ADC5_AMUX_THM3_100K_PU>;
 579                 qcom,ratiometric;
 580                 qcom,hw-settle-time = <200>;
 581                 label = "conn_therm";
 582         };
 583 };
 584
 585 &pm8150b_adc_tm {
 586         status = "okay";
 587
 588         conn-therm@0 {
 589                 reg = <0>;
 590                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
 591                 qcom,ratiometric;
 592                 qcom,hw-settle-time-us = <200>;
 593         };
 594 };
 595
 596 &pm8150l_adc_tm {
 597         status = "okay";
 598
 599         camera-flash-therm@0 {
 600                 reg = <0>;
 601                 io-channels = <&pm8150l_adc ADC5_AMUX_THM1_100K_PU>;
 602                 qcom,ratiometric;
 603                 qcom,hw-settle-time-us = <200>;
 604         };
 605
 606         skin-msm-therm@1 {
 607                 reg = <1>;
 608                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
 609                 qcom,ratiometric;
 610                 qcom,hw-settle-time-us = <200>;
 611         };
 612
 613         pa-therm2@2 {
 614                 reg = <2>;
 615                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
 616                 qcom,ratiometric;
 617                 qcom,hw-settle-time-us = <200>;
 618         };
 619 };
 620
 621 &pm8150l_adc {
 622         channel@4d {
 623                 reg = <ADC5_AMUX_THM1_100K_PU>;
 624                 qcom,ratiometric;
 625                 qcom,hw-settle-time = <200>;
 626                 label = "camera_flash_therm";
 627         };
 628
 629         channel@4e {
 630                 reg = <ADC5_AMUX_THM2_100K_PU>;
 631                 qcom,ratiometric;
 632                 qcom,hw-settle-time = <200>;
 633                 label = "skin_msm_therm";
 634         };
 635
 636         channel@4f {
 637                 reg = <ADC5_AMUX_THM3_100K_PU>;
 638                 qcom,ratiometric;
 639                 qcom,hw-settle-time = <200>;
 640                 label = "pa_therm2";
 641         };
 642 };
 643
 644 &qupv3_id_0 {
 645         status = "okay";
 646 };
 647
 648 &qupv3_id_1 {
 649         status = "okay";
 650 };
 651
 652 &qupv3_id_2 {
 653         status = "okay";
 654 };
 655
 656 &rxmacro {
 657         status = "okay";
 658 };
 659
 660 &slpi {
 661         status = "okay";
 662         firmware-name = "qcom/sm8250/slpi.mbn";
 663 };
 664
 665 &sound {
 666         compatible = "qcom,sm8250-sndcard";
 667         model = "SM8250-MTP-WCD9380-WSA8810-VA-DMIC";
 668         audio-routing =
 669                 "SpkrLeft IN", "WSA_SPK1 OUT",
 670                 "SpkrRight IN", "WSA_SPK2 OUT",
 671                 "IN1_HPHL", "HPHL_OUT",
 672                 "IN2_HPHR", "HPHR_OUT",
 673                 "AMIC1", "MIC BIAS1",
 674                 "AMIC2", "MIC BIAS2",
 675                 "AMIC3", "MIC BIAS3",
 676                 "AMIC4", "MIC BIAS3",
 677                 "AMIC5", "MIC BIAS4",
 678                 "TX SWR_ADC0", "ADC1_OUTPUT",
 679                 "TX SWR_ADC1", "ADC2_OUTPUT",
 680                 "TX SWR_ADC2", "ADC3_OUTPUT",
 681                 "TX SWR_ADC3", "ADC4_OUTPUT",
 682                 "TX SWR_DMIC0", "DMIC1_OUTPUT",
 683                 "TX SWR_DMIC1", "DMIC2_OUTPUT",
 684                 "TX SWR_DMIC2", "DMIC3_OUTPUT",
 685                 "TX SWR_DMIC3", "DMIC4_OUTPUT",
 686                 "TX SWR_DMIC4", "DMIC5_OUTPUT",
 687                 "TX SWR_DMIC5", "DMIC6_OUTPUT",
 688                 "TX SWR_DMIC6", "DMIC7_OUTPUT",
 689                 "TX SWR_DMIC7", "DMIC8_OUTPUT";
 690
 691         mm1-dai-link {
 692                 link-name = "MultiMedia1";
 693                 cpu {
 694                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 695                 };
 696         };
 697
 698         mm2-dai-link {
 699                 link-name = "MultiMedia2";
 700                 cpu {
 701                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 702                 };
 703         };
 704
 705         mm3-dai-link {
 706                 link-name = "MultiMedia3";
 707                 cpu {
 708                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
 709                 };
 710         };
 711
 712         wcd-playback-dai-link {
 713                 link-name = "WCD Playback";
 714                 cpu {
 715                         sound-dai = <&q6afedai RX_CODEC_DMA_RX_0>;
 716                 };
 717                 codec {
 718                         sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
 719                 };
 720                 platform {
 721                         sound-dai = <&q6routing>;
 722                 };
 723         };
 724
 725         wcd-capture-dai-link {
 726                 link-name = "WCD Capture";
 727                 cpu {
 728                         sound-dai = <&q6afedai TX_CODEC_DMA_TX_3>;
 729                 };
 730
 731                 codec {
 732                         sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
 733                 };
 734                 platform {
 735                         sound-dai = <&q6routing>;
 736                 };
 737         };
 738
 739         wsa-dai-link {
 740                 link-name = "WSA Playback";
 741                 cpu {
 742                         sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
 743                 };
 744
 745                 codec {
 746                         sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
 747                 };
 748                 platform {
 749                         sound-dai = <&q6routing>;
 750                 };
 751         };
 752
 753         va-dai-link {
 754                 link-name = "VA Capture";
 755                 cpu {
 756                         sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
 757                 };
 758
 759                 platform {
 760                         sound-dai = <&q6routing>;
 761                 };
 762
 763                 codec {
 764                         sound-dai = <&vamacro 0>;
 765                 };
 766         };
 767 };
 768
 769 &swr0 {
 770         status = "okay";
 771
 772         left_spkr: speaker@0,3 {
 773                 compatible = "sdw10217211000";
 774                 reg = <0 3>;
 775                 powerdown-gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
 776                 #thermal-sensor-cells = <0>;
 777                 sound-name-prefix = "SpkrLeft";
 778                 #sound-dai-cells = <0>;
 779         };
 780
 781         right_spkr: speaker@0,4 {
 782                 compatible = "sdw10217211000";
 783                 reg = <0 4>;
 784                 powerdown-gpios = <&tlmm 127 GPIO_ACTIVE_LOW>;
 785                 #thermal-sensor-cells = <0>;
 786                 sound-name-prefix = "SpkrRight";
 787                 #sound-dai-cells = <0>;
 788         };
 789 };
 790
 791 &swr1 {
 792         status = "okay";
 793
 794         wcd_rx: wcd9380-rx@0,4 {
 795                 compatible = "sdw20217010d00";
 796                 reg = <0 4>;
 797                 qcom,rx-port-mapping = <1 2 3 4 5>;
 798         };
 799 };
 800
 801 &swr2 {
 802         status = "okay";
 803
 804         wcd_tx: wcd9380-tx@0,3 {
 805                 compatible = "sdw20217010d00";
 806                 reg = <0 3>;
 807                 qcom,tx-port-mapping = <2 3 4 5>;
 808         };
 809 };
 810
 811 &tlmm {
 812         gpio-reserved-ranges = <28 4>, <40 4>;
 813
 814         wcd938x_reset_default: wcd938x-reset-default-state {
 815                 pins = "gpio32";
 816                 function = "gpio";
 817                 drive-strength = <16>;
 818                 output-high;
 819         };
 820
 821         wcd938x_reset_sleep: wcd938x-reset-sleep-state {
 822                 pins = "gpio32";
 823                 function = "gpio";
 824                 drive-strength = <16>;
 825                 bias-disable;
 826                 output-low;
 827         };
 828 };
 829
 830 &txmacro {
 831         status = "okay";
 832 };
 833
 834 &uart12 {
 835         status = "okay";
 836 };
 837
 838 &ufs_mem_hc {
 839         status = "okay";
 840
 841         vcc-supply = <&vreg_l17a_3p0>;
 842         vcc-max-microamp = <750000>;
 843         vccq-supply = <&vreg_l6a_1p2>;
 844         vccq-max-microamp = <700000>;
 845         vccq2-supply = <&vreg_s4a_1p8>;
 846         vccq2-max-microamp = <750000>;
 847 };
 848
 849 &ufs_mem_phy {
 850         status = "okay";
 851
 852         vdda-phy-supply = <&vreg_l5a_0p875>;
 853         vdda-pll-supply = <&vreg_l9a_1p2>;
 854 };
 855
 856 &usb_1 {
 857         status = "okay";
 858 };
 859
 860 &usb_1_dwc3 {
 861         dr_mode = "host";
 862 };
 863
 864 &usb_1_hsphy {
 865         status = "okay";
 866
 867         vdda-pll-supply = <&vreg_l5a_0p875>;
 868         vdda18-supply = <&vreg_l12a_1p8>;
 869         vdda33-supply = <&vreg_l2a_3p1>;
 870 };
 871
 872 &usb_1_qmpphy {
 873         status = "okay";
 874
 875         vdda-phy-supply = <&vreg_l9a_1p2>;
 876         vdda-pll-supply = <&vreg_l18a_0p9>;
 877 };
 878
 879 &usb_2 {
 880         status = "okay";
 881 };
 882
 883 &usb_2_dwc3 {
 884         dr_mode = "host";
 885 };
 886
 887 &usb_2_hsphy {
 888         status = "okay";
 889
 890         vdda-pll-supply = <&vreg_l5a_0p875>;
 891         vdda18-supply = <&vreg_l12a_1p8>;
 892         vdda33-supply = <&vreg_l2a_3p1>;
 893 };
 894
 895 &usb_2_qmpphy {
 896         status = "okay";
 897
 898         vdda-phy-supply = <&vreg_l9a_1p2>;
 899         vdda-pll-supply = <&vreg_l18a_0p9>;
 900 };
 901
 902 &venus {
 903         status = "okay";
 904 };
 905
 906 &wsamacro {
 907         status = "okay";
 908 };