arch/arm64/boot/dts/qcom/sdm845-mtp.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SDM845 MTP board device tree source
   4  *
   5  * Copyright (c) 2018, The Linux Foundation. All rights reserved.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  11 #include "sdm845.dtsi"
  12 #include "pm8998.dtsi"
  13 #include "pmi8998.dtsi"
  14
  15 / {
  16         model = "Qualcomm Technologies, Inc. SDM845 MTP";
  17         compatible = "qcom,sdm845-mtp", "qcom,sdm845";
  18         chassis-type = "handset";
  19
  20         aliases {
  21                 serial0 = &uart9;
  22         };
  23
  24         chosen {
  25                 stdout-path = "serial0:115200n8";
  26         };
  27
  28         vph_pwr: vph-pwr-regulator {
  29                 compatible = "regulator-fixed";
  30                 regulator-name = "vph_pwr";
  31                 regulator-min-microvolt = <3700000>;
  32                 regulator-max-microvolt = <3700000>;
  33         };
  34
  35         /*
  36          * Apparently RPMh does not provide support for PM8998 S4 because it
  37          * is always-on; model it as a fixed regulator.
  38          */
  39         vreg_s4a_1p8: pm8998-smps4 {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vreg_s4a_1p8";
  42
  43                 regulator-min-microvolt = <1800000>;
  44                 regulator-max-microvolt = <1800000>;
  45
  46                 regulator-always-on;
  47                 regulator-boot-on;
  48
  49                 vin-supply = <&vph_pwr>;
  50         };
  51
  52         thermal-zones {
  53                 xo_thermal: xo-thermal {
  54                         polling-delay-passive = <0>;
  55                         polling-delay = <0>;
  56
  57                         thermal-sensors = <&pm8998_adc_tm 1>;
  58
  59                         trips {
  60                                 trip-point {
  61                                         temperature = <125000>;
  62                                         hysteresis = <10000>;
  63                                         type = "passive";
  64                                 };
  65                         };
  66                 };
  67
  68                 msm_thermal: msm-thermal {
  69                         polling-delay-passive = <0>;
  70                         polling-delay = <0>;
  71
  72                         thermal-sensors = <&pm8998_adc_tm 2>;
  73
  74                         trips {
  75                                 trip-point {
  76                                         temperature = <125000>;
  77                                         hysteresis = <10000>;
  78                                         type = "passive";
  79                                 };
  80                         };
  81                 };
  82
  83                 pa_thermal: pa-thermal {
  84                         polling-delay-passive = <0>;
  85                         polling-delay = <0>;
  86
  87                         thermal-sensors = <&pm8998_adc_tm 3>;
  88
  89                         trips {
  90                                 trip-point {
  91                                         temperature = <125000>;
  92                                         hysteresis = <10000>;
  93                                         type = "passive";
  94                                 };
  95                         };
  96                 };
  97
  98                 quiet_thermal: quiet-thermal {
  99                         polling-delay-passive = <0>;
 100                         polling-delay = <0>;
 101
 102                         thermal-sensors = <&pm8998_adc_tm 4>;
 103
 104                         trips {
 105                                 trip-point {
 106                                         temperature = <125000>;
 107                                         hysteresis = <10000>;
 108                                         type = "passive";
 109                                 };
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &adsp_pas {
 116         status = "okay";
 117         firmware-name = "qcom/sdm845/adsp.mbn";
 118 };
 119
 120 &apps_rsc {
 121         regulators-0 {
 122                 compatible = "qcom,pm8998-rpmh-regulators";
 123                 qcom,pmic-id = "a";
 124
 125                 vdd-s1-supply = <&vph_pwr>;
 126                 vdd-s2-supply = <&vph_pwr>;
 127                 vdd-s3-supply = <&vph_pwr>;
 128                 vdd-s4-supply = <&vph_pwr>;
 129                 vdd-s5-supply = <&vph_pwr>;
 130                 vdd-s6-supply = <&vph_pwr>;
 131                 vdd-s7-supply = <&vph_pwr>;
 132                 vdd-s8-supply = <&vph_pwr>;
 133                 vdd-s9-supply = <&vph_pwr>;
 134                 vdd-s10-supply = <&vph_pwr>;
 135                 vdd-s11-supply = <&vph_pwr>;
 136                 vdd-s12-supply = <&vph_pwr>;
 137                 vdd-s13-supply = <&vph_pwr>;
 138                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
 139                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 140                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
 141                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
 142                 vdd-l6-supply = <&vph_pwr>;
 143                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 144                 vdd-l9-supply = <&vreg_bob>;
 145                 vdd-l10-l23-l25-supply = <&vreg_bob>;
 146                 vdd-l13-l19-l21-supply = <&vreg_bob>;
 147                 vdd-l16-l28-supply = <&vreg_bob>;
 148                 vdd-l18-l22-supply = <&vreg_bob>;
 149                 vdd-l20-l24-supply = <&vreg_bob>;
 150                 vdd-l26-supply = <&vreg_s3a_1p35>;
 151                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 152
 153                 vreg_s2a_1p125: smps2 {
 154                         regulator-min-microvolt = <1100000>;
 155                         regulator-max-microvolt = <1100000>;
 156                 };
 157
 158                 vreg_s3a_1p35: smps3 {
 159                         regulator-min-microvolt = <1352000>;
 160                         regulator-max-microvolt = <1352000>;
 161                 };
 162
 163                 vreg_s5a_2p04: smps5 {
 164                         regulator-min-microvolt = <1904000>;
 165                         regulator-max-microvolt = <2040000>;
 166                 };
 167
 168                 vreg_s7a_1p025: smps7 {
 169                         regulator-min-microvolt = <900000>;
 170                         regulator-max-microvolt = <1028000>;
 171                 };
 172
 173                 vdd_qusb_hs0:
 174                 vdda_hp_pcie_core:
 175                 vdda_mipi_csi0_0p9:
 176                 vdda_mipi_csi1_0p9:
 177                 vdda_mipi_csi2_0p9:
 178                 vdda_mipi_dsi0_pll:
 179                 vdda_mipi_dsi1_pll:
 180                 vdda_qlink_lv:
 181                 vdda_qlink_lv_ck:
 182                 vdda_qrefs_0p875:
 183                 vdda_pcie_core:
 184                 vdda_pll_cc_ebi01:
 185                 vdda_pll_cc_ebi23:
 186                 vdda_sp_sensor:
 187                 vdda_ufs1_core:
 188                 vdda_ufs2_core:
 189                 vdda_usb1_ss_core:
 190                 vdda_usb2_ss_core:
 191                 vreg_l1a_0p875: ldo1 {
 192                         regulator-min-microvolt = <880000>;
 193                         regulator-max-microvolt = <880000>;
 194                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 195                 };
 196
 197                 vddpx_10:
 198                 vreg_l2a_1p2: ldo2 {
 199                         regulator-min-microvolt = <1200000>;
 200                         regulator-max-microvolt = <1200000>;
 201                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 202                         regulator-always-on;
 203                 };
 204
 205                 vreg_l3a_1p0: ldo3 {
 206                         regulator-min-microvolt = <1000000>;
 207                         regulator-max-microvolt = <1000000>;
 208                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 209                 };
 210
 211                 vdd_wcss_cx:
 212                 vdd_wcss_mx:
 213                 vdda_wcss_pll:
 214                 vreg_l5a_0p8: ldo5 {
 215                         regulator-min-microvolt = <800000>;
 216                         regulator-max-microvolt = <800000>;
 217                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 218                 };
 219
 220                 vddpx_13:
 221                 vreg_l6a_1p8: ldo6 {
 222                         regulator-min-microvolt = <1856000>;
 223                         regulator-max-microvolt = <1856000>;
 224                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 225                 };
 226
 227                 vreg_l7a_1p8: ldo7 {
 228                         regulator-min-microvolt = <1800000>;
 229                         regulator-max-microvolt = <1800000>;
 230                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 231                 };
 232
 233                 vreg_l8a_1p2: ldo8 {
 234                         regulator-min-microvolt = <1200000>;
 235                         regulator-max-microvolt = <1248000>;
 236                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 237                 };
 238
 239                 vreg_l9a_1p8: ldo9 {
 240                         regulator-min-microvolt = <1704000>;
 241                         regulator-max-microvolt = <2928000>;
 242                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 243                 };
 244
 245                 vreg_l10a_1p8: ldo10 {
 246                         regulator-min-microvolt = <1704000>;
 247                         regulator-max-microvolt = <2928000>;
 248                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 249                 };
 250
 251                 vreg_l11a_1p0: ldo11 {
 252                         regulator-min-microvolt = <1000000>;
 253                         regulator-max-microvolt = <1048000>;
 254                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 255                 };
 256
 257                 vdd_qfprom:
 258                 vdd_qfprom_sp:
 259                 vdda_apc1_cs_1p8:
 260                 vdda_gfx_cs_1p8:
 261                 vdda_qrefs_1p8:
 262                 vdda_qusb_hs0_1p8:
 263                 vddpx_11:
 264                 vreg_l12a_1p8: ldo12 {
 265                         regulator-min-microvolt = <1800000>;
 266                         regulator-max-microvolt = <1800000>;
 267                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 268                 };
 269
 270                 vddpx_2:
 271                 vreg_l13a_2p95: ldo13 {
 272                         regulator-min-microvolt = <1800000>;
 273                         regulator-max-microvolt = <2960000>;
 274                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 275                 };
 276
 277                 vreg_l14a_1p88: ldo14 {
 278                         regulator-min-microvolt = <1800000>;
 279                         regulator-max-microvolt = <1800000>;
 280                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 281                 };
 282
 283                 vreg_l15a_1p8: ldo15 {
 284                         regulator-min-microvolt = <1800000>;
 285                         regulator-max-microvolt = <1800000>;
 286                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 287                 };
 288
 289                 vreg_l16a_2p7: ldo16 {
 290                         regulator-min-microvolt = <2704000>;
 291                         regulator-max-microvolt = <2704000>;
 292                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 293                 };
 294
 295                 vreg_l17a_1p3: ldo17 {
 296                         regulator-min-microvolt = <1304000>;
 297                         regulator-max-microvolt = <1304000>;
 298                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 299                 };
 300
 301                 vreg_l18a_2p7: ldo18 {
 302                         regulator-min-microvolt = <2704000>;
 303                         regulator-max-microvolt = <2960000>;
 304                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 305                 };
 306
 307                 vreg_l19a_3p0: ldo19 {
 308                         regulator-min-microvolt = <2856000>;
 309                         regulator-max-microvolt = <3104000>;
 310                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 311                 };
 312
 313                 vreg_l20a_2p95: ldo20 {
 314                         regulator-min-microvolt = <2704000>;
 315                         regulator-max-microvolt = <2960000>;
 316                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 317                 };
 318
 319                 vreg_l21a_2p95: ldo21 {
 320                         regulator-min-microvolt = <2704000>;
 321                         regulator-max-microvolt = <2960000>;
 322                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 323                 };
 324
 325                 vreg_l22a_2p85: ldo22 {
 326                         regulator-min-microvolt = <2864000>;
 327                         regulator-max-microvolt = <3312000>;
 328                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 329                 };
 330
 331                 vreg_l23a_3p3: ldo23 {
 332                         regulator-min-microvolt = <3000000>;
 333                         regulator-max-microvolt = <3312000>;
 334                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 335                 };
 336
 337                 vdda_qusb_hs0_3p1:
 338                 vreg_l24a_3p075: ldo24 {
 339                         regulator-min-microvolt = <3088000>;
 340                         regulator-max-microvolt = <3088000>;
 341                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 342                 };
 343
 344                 vreg_l25a_3p3: ldo25 {
 345                         regulator-min-microvolt = <3300000>;
 346                         regulator-max-microvolt = <3312000>;
 347                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 348                 };
 349
 350                 vdda_hp_pcie_1p2:
 351                 vdda_hv_ebi0:
 352                 vdda_hv_ebi1:
 353                 vdda_hv_ebi2:
 354                 vdda_hv_ebi3:
 355                 vdda_mipi_csi_1p25:
 356                 vdda_mipi_dsi0_1p2:
 357                 vdda_mipi_dsi1_1p2:
 358                 vdda_pcie_1p2:
 359                 vdda_ufs1_1p2:
 360                 vdda_ufs2_1p2:
 361                 vdda_usb1_ss_1p2:
 362                 vdda_usb2_ss_1p2:
 363                 vreg_l26a_1p2: ldo26 {
 364                         regulator-min-microvolt = <1200000>;
 365                         regulator-max-microvolt = <1200000>;
 366                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 367                 };
 368
 369                 vreg_l28a_3p0: ldo28 {
 370                         regulator-min-microvolt = <2856000>;
 371                         regulator-max-microvolt = <3008000>;
 372                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 373                 };
 374
 375                 vreg_lvs1a_1p8: lvs1 {
 376                         regulator-min-microvolt = <1800000>;
 377                         regulator-max-microvolt = <1800000>;
 378                 };
 379
 380                 vreg_lvs2a_1p8: lvs2 {
 381                         regulator-min-microvolt = <1800000>;
 382                         regulator-max-microvolt = <1800000>;
 383                 };
 384         };
 385
 386         regulators-1 {
 387                 compatible = "qcom,pmi8998-rpmh-regulators";
 388                 qcom,pmic-id = "b";
 389
 390                 vdd-bob-supply = <&vph_pwr>;
 391
 392                 vreg_bob: bob {
 393                         regulator-min-microvolt = <3312000>;
 394                         regulator-max-microvolt = <3600000>;
 395                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 396                         regulator-allow-bypass;
 397                 };
 398         };
 399
 400         regulators-2 {
 401                 compatible = "qcom,pm8005-rpmh-regulators";
 402                 qcom,pmic-id = "c";
 403
 404                 vdd-s1-supply = <&vph_pwr>;
 405                 vdd-s2-supply = <&vph_pwr>;
 406                 vdd-s3-supply = <&vph_pwr>;
 407                 vdd-s4-supply = <&vph_pwr>;
 408
 409                 vreg_s3c_0p6: smps3 {
 410                         regulator-min-microvolt = <600000>;
 411                         regulator-max-microvolt = <600000>;
 412                 };
 413         };
 414 };
 415
 416 &cdsp_pas {
 417         status = "okay";
 418         firmware-name = "qcom/sdm845/cdsp.mbn";
 419 };
 420
 421 &gcc {
 422         protected-clocks = <GCC_QSPI_CORE_CLK>,
 423                            <GCC_QSPI_CORE_CLK_SRC>,
 424                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 425                            <GCC_LPASS_Q6_AXI_CLK>,
 426                            <GCC_LPASS_SWAY_CLK>;
 427 };
 428
 429 &gmu {
 430         status = "okay";
 431 };
 432
 433 &gpu {
 434         status = "okay";
 435
 436         zap-shader {
 437                 memory-region = <&gpu_mem>;
 438                 firmware-name = "qcom/sdm845/a630_zap.mbn";
 439         };
 440 };
 441
 442 &i2c10 {
 443         status = "okay";
 444         clock-frequency = <400000>;
 445 };
 446
 447 &ipa {
 448         qcom,gsi-loader = "self";
 449         memory-region = <&ipa_fw_mem>;
 450         status = "okay";
 451 };
 452
 453 &mdss {
 454         status = "okay";
 455 };
 456
 457 &mdss_dsi0 {
 458         status = "okay";
 459         vdda-supply = <&vdda_mipi_dsi0_1p2>;
 460
 461         qcom,dual-dsi-mode;
 462         qcom,master-dsi;
 463
 464         ports {
 465                 port@1 {
 466                         endpoint {
 467                                 remote-endpoint = <&truly_in_0>;
 468                                 data-lanes = <0 1 2 3>;
 469                         };
 470                 };
 471         };
 472
 473         panel@0 {
 474                 compatible = "truly,nt35597-2K-display";
 475                 reg = <0>;
 476                 vdda-supply = <&vreg_l14a_1p88>;
 477
 478                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 479                 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
 480
 481                 ports {
 482                         #address-cells = <1>;
 483                         #size-cells = <0>;
 484
 485                         port@0 {
 486                                 reg = <0>;
 487                                 truly_in_0: endpoint {
 488                                         remote-endpoint = <&mdss_dsi0_out>;
 489                                 };
 490                         };
 491
 492                         port@1 {
 493                                 reg = <1>;
 494                                 truly_in_1: endpoint {
 495                                         remote-endpoint = <&mdss_dsi1_out>;
 496                                 };
 497                         };
 498                 };
 499         };
 500 };
 501
 502 &mdss_dsi0_phy {
 503         status = "okay";
 504         vdds-supply = <&vdda_mipi_dsi0_pll>;
 505 };
 506
 507 &mdss_dsi1 {
 508         status = "okay";
 509         vdda-supply = <&vdda_mipi_dsi1_1p2>;
 510
 511         qcom,dual-dsi-mode;
 512
 513         /* DSI1 is slave, so use DSI0 clocks */
 514         assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 515
 516         ports {
 517                 port@1 {
 518                         endpoint {
 519                                 remote-endpoint = <&truly_in_1>;
 520                                 data-lanes = <0 1 2 3>;
 521                         };
 522                 };
 523         };
 524 };
 525
 526 &mdss_dsi1_phy {
 527         status = "okay";
 528         vdds-supply = <&vdda_mipi_dsi1_pll>;
 529 };
 530
 531 &mss_pil {
 532         status = "okay";
 533         firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
 534 };
 535
 536 &pcie0 {
 537         perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
 538
 539         pinctrl-0 = <&pcie0_default_state>;
 540         pinctrl-names = "default";
 541
 542         status = "okay";
 543 };
 544
 545 &pcie0_phy {
 546         vdda-phy-supply = <&vreg_l1a_0p875>;
 547         vdda-pll-supply = <&vreg_l26a_1p2>;
 548
 549         status = "okay";
 550 };
 551
 552 &pcie1 {
 553         perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
 554
 555         pinctrl-names = "default";
 556         pinctrl-0 = <&pcie1_default_state>;
 557
 558         status = "okay";
 559 };
 560
 561 &pcie1_phy {
 562         status = "okay";
 563
 564         vdda-phy-supply = <&vreg_l1a_0p875>;
 565         vdda-pll-supply = <&vreg_l26a_1p2>;
 566 };
 567
 568 &pm8998_adc {
 569         channel@4c {
 570                 reg = <ADC5_XO_THERM_100K_PU>;
 571                 label = "xo_therm";
 572                 qcom,ratiometric;
 573                 qcom,hw-settle-time = <200>;
 574         };
 575
 576         channel@4d {
 577                 reg = <ADC5_AMUX_THM1_100K_PU>;
 578                 label = "msm_therm";
 579                 qcom,ratiometric;
 580                 qcom,hw-settle-time = <200>;
 581         };
 582
 583         channel@4f {
 584                 reg = <ADC5_AMUX_THM3_100K_PU>;
 585                 label = "pa_therm1";
 586                 qcom,ratiometric;
 587                 qcom,hw-settle-time = <200>;
 588         };
 589
 590         channel@51 {
 591                 reg = <ADC5_AMUX_THM5_100K_PU>;
 592                 label = "quiet_therm";
 593                 qcom,ratiometric;
 594                 qcom,hw-settle-time = <200>;
 595         };
 596
 597         channel@83 {
 598                 reg = <ADC5_VPH_PWR>;
 599                 label = "vph_pwr";
 600                 qcom,ratiometric;
 601                 qcom,hw-settle-time = <200>;
 602         };
 603
 604         channel@85 {
 605                 reg = <ADC5_VCOIN>;
 606                 label = "vcoin";
 607                 qcom,ratiometric;
 608                 qcom,hw-settle-time = <200>;
 609         };
 610 };
 611
 612 &pm8998_adc_tm {
 613         status = "okay";
 614
 615         xo-thermistor@1 {
 616                 reg = <1>;
 617                 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
 618                 qcom,ratiometric;
 619                 qcom,hw-settle-time-us = <200>;
 620         };
 621
 622         msm-thermistor@2 {
 623                 reg = <2>;
 624                 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
 625                 qcom,ratiometric;
 626                 qcom,hw-settle-time-us = <200>;
 627         };
 628
 629         pa-thermistor@3 {
 630                 reg = <3>;
 631                 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
 632                 qcom,ratiometric;
 633                 qcom,hw-settle-time-us = <200>;
 634         };
 635
 636         quiet-thermistor@4 {
 637                 reg = <4>;
 638                 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
 639                 qcom,ratiometric;
 640                 qcom,hw-settle-time-us = <200>;
 641         };
 642 };
 643
 644 &pm8998_resin {
 645         linux,code = <KEY_VOLUMEDOWN>;
 646         status = "okay";
 647 };
 648
 649 &qupv3_id_1 {
 650         status = "okay";
 651 };
 652
 653 &sdhc_2 {
 654         status = "okay";
 655
 656         pinctrl-names = "default";
 657         pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
 658
 659         vmmc-supply = <&vreg_l21a_2p95>;
 660         vqmmc-supply = <&vddpx_2>;
 661
 662         cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 663 };
 664
 665 &tlmm {
 666         pcie0_default_state: pcie0-default-state {
 667                 clkreq-pins {
 668                         pins = "gpio36";
 669                         function = "pci_e0";
 670                         bias-pull-up;
 671                 };
 672
 673                 perst-n-pins {
 674                         pins = "gpio35";
 675                         function = "gpio";
 676                         drive-strength = <2>;
 677                         bias-pull-down;
 678                 };
 679
 680                 wake-n-pins {
 681                         pins = "gpio37";
 682                         function = "gpio";
 683                         drive-strength = <2>;
 684                         bias-pull-up;
 685                 };
 686         };
 687
 688         pcie1_default_state: pcie1-default-state {
 689                 clkreq-pins {
 690                         pins = "gpio103";
 691                         function = "pci_e1";
 692                         bias-pull-up;
 693                 };
 694
 695                 perst-n-pins {
 696                         pins = "gpio102";
 697                         function = "gpio";
 698                         drive-strength = <16>;
 699                         bias-pull-down;
 700                 };
 701
 702                 wake-n-pins {
 703                         pins = "gpio104";
 704                         function = "gpio";
 705                         drive-strength = <2>;
 706                         bias-pull-up;
 707                 };
 708         };
 709 };
 710
 711 &uart9 {
 712         status = "okay";
 713 };
 714
 715 &ufs_mem_hc {
 716         status = "okay";
 717
 718         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 719
 720         vcc-supply = <&vreg_l20a_2p95>;
 721         vcc-max-microamp = <600000>;
 722 };
 723
 724 &ufs_mem_phy {
 725         status = "okay";
 726
 727         vdda-phy-supply = <&vdda_ufs1_core>;
 728         vdda-pll-supply = <&vdda_ufs1_1p2>;
 729 };
 730
 731 &usb_1 {
 732         status = "okay";
 733 };
 734
 735 &usb_1_dwc3 {
 736         /* Until we have Type C hooked up we'll force this as peripheral. */
 737         dr_mode = "peripheral";
 738 };
 739
 740 &usb_1_hsphy {
 741         status = "okay";
 742
 743         vdd-supply = <&vdda_usb1_ss_core>;
 744         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 745         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 746
 747         qcom,imp-res-offset-value = <8>;
 748         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 749         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 750         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 751 };
 752
 753 &usb_1_qmpphy {
 754         status = "okay";
 755
 756         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 757         vdda-pll-supply = <&vdda_usb1_ss_core>;
 758 };
 759
 760 &usb_2 {
 761         status = "okay";
 762 };
 763
 764 &usb_2_dwc3 {
 765         /*
 766          * Though the USB block on SDM845 can support host, there's no vbus
 767          * signal for this port on MTP.  Thus (unless you have a non-compliant
 768          * hub that works without vbus) the only sensible thing is to force
 769          * peripheral mode.
 770          */
 771         dr_mode = "peripheral";
 772 };
 773
 774 &usb_2_hsphy {
 775         status = "okay";
 776
 777         vdd-supply = <&vdda_usb2_ss_core>;
 778         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 779         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 780
 781         qcom,imp-res-offset-value = <8>;
 782         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
 783 };
 784
 785 &usb_2_qmpphy {
 786         status = "okay";
 787
 788         vdda-phy-supply = <&vdda_usb2_ss_1p2>;
 789         vdda-pll-supply = <&vdda_usb2_ss_core>;
 790 };
 791
 792 &venus {
 793         status = "okay";
 794 };
 795
 796 &wifi {
 797         status = "okay";
 798         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 799         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 800         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 801         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 802
 803         qcom,snoc-host-cap-8bit-quirk;
 804         qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
 805 };
 806
 807 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 808
 809 &qup_i2c10_default {
 810         drive-strength = <2>;
 811         bias-disable;
 812 };
 813
 814 &qup_uart9_rx {
 815         drive-strength = <2>;
 816         bias-pull-up;
 817 };
 818
 819 &qup_uart9_tx {
 820         drive-strength = <2>;
 821         bias-disable;
 822 };
 823
 824 &tlmm {
 825         gpio-reserved-ranges = <0 4>, <81 4>;
 826
 827         sdc2_clk: sdc2-clk-state {
 828                 pins = "sdc2_clk";
 829                 bias-disable;
 830
 831                 /*
 832                  * It seems that mmc_test reports errors if drive
 833                  * strength is not 16 on clk, cmd, and data pins.
 834                  */
 835                 drive-strength = <16>;
 836         };
 837
 838         sdc2_cmd: sdc2-cmd-state {
 839                 pins = "sdc2_cmd";
 840                 bias-pull-up;
 841                 drive-strength = <16>;
 842         };
 843
 844         sdc2_data: sdc2-data-state {
 845                 pins = "sdc2_data";
 846                 bias-pull-up;
 847                 drive-strength = <16>;
 848         };
 849
 850         sd_card_det_n: sd-card-det-n-state {
 851                 pins = "gpio126";
 852                 function = "gpio";
 853                 bias-pull-up;
 854         };
 855 };