arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, Linaro Ltd.
   4  */
   5
   6 /dts-v1/;
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  10 #include <dt-bindings/sound/qcom,q6afe.h>
  11 #include <dt-bindings/sound/qcom,q6asm.h>
  12 #include "sm8250.dtsi"
  13 #include "pm8150.dtsi"
  14 #include "pm8150b.dtsi"
  15 #include "pm8150l.dtsi"
  16
  17 / {
  18         model = "Qualcomm Technologies, Inc. Robotics RB5";
  19         compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
  20
  21         aliases {
  22                 serial0 = &uart12;
  23                 sdhc2 = &sdhc_2;
  24         };
  25
  26         chosen {
  27                 stdout-path = "serial0:115200n8";
  28         };
  29
  30         /* Fixed crystal oscillator dedicated to MCP2518FD */
  31         clk40M: can_clock {
  32                 compatible = "fixed-clock";
  33                 #clock-cells = <0>;
  34                 clock-frequency = <40000000>;
  35         };
  36
  37         dc12v: dc12v-regulator {
  38                 compatible = "regulator-fixed";
  39                 regulator-name = "DC12V";
  40                 regulator-min-microvolt = <12000000>;
  41                 regulator-max-microvolt = <12000000>;
  42                 regulator-always-on;
  43         };
  44
  45         hdmi-out {
  46                 compatible = "hdmi-connector";
  47                 type = "a";
  48
  49                 port {
  50                         hdmi_con: endpoint {
  51                                 remote-endpoint = <&lt9611_out>;
  52                         };
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58
  59                 user4 {
  60                         label = "green:user4";
  61                         gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>;
  62                         linux,default-trigger = "panic-indicator";
  63                         default-state = "off";
  64                 };
  65
  66                 wlan {
  67                         label = "yellow:wlan";
  68                         gpios = <&pm8150_gpios 9 GPIO_ACTIVE_HIGH>;
  69                         linux,default-trigger = "phy0tx";
  70                         default-state = "off";
  71                 };
  72
  73                 bt {
  74                         label = "blue:bt";
  75                         gpios = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>;
  76                         linux,default-trigger = "bluetooth-power";
  77                         default-state = "off";
  78                 };
  79
  80         };
  81
  82         lt9611_1v2: lt9611-vdd12-regulator {
  83                 compatible = "regulator-fixed";
  84                 regulator-name = "LT9611_1V2";
  85
  86                 vin-supply = <&vdc_3v3>;
  87                 regulator-min-microvolt = <1200000>;
  88                 regulator-max-microvolt = <1200000>;
  89         };
  90
  91         lt9611_3v3: lt9611-3v3 {
  92                 compatible = "regulator-fixed";
  93                 regulator-name = "LT9611_3V3";
  94
  95                 vin-supply = <&vdc_3v3>;
  96                 regulator-min-microvolt = <3300000>;
  97                 regulator-max-microvolt = <3300000>;
  98                 regulator-boot-on;
  99                 regulator-always-on;
 100         };
 101
 102         thermal-zones {
 103                 conn-thermal {
 104                         polling-delay-passive = <0>;
 105                         polling-delay = <0>;
 106                         thermal-sensors = <&pm8150b_adc_tm 0>;
 107
 108                         trips {
 109                                 active-config0 {
 110                                         temperature = <125000>;
 111                                         hysteresis = <1000>;
 112                                         type = "critical";
 113                                 };
 114                         };
 115                 };
 116
 117                 pm8150l-thermal {
 118                         polling-delay-passive = <0>;
 119                         polling-delay = <0>;
 120                         thermal-sensors = <&pm8150l_adc_tm 1>;
 121
 122                         trips {
 123                                 active-config0 {
 124                                         temperature = <50000>;
 125                                         hysteresis = <4000>;
 126                                         type = "passive";
 127                                 };
 128                         };
 129                 };
 130
 131                 skin-msm-thermal {
 132                         polling-delay-passive = <0>;
 133                         polling-delay = <0>;
 134                         thermal-sensors = <&pm8150l_adc_tm 0>;
 135
 136                         trips {
 137                                 active-config0 {
 138                                         temperature = <50000>;
 139                                         hysteresis = <4000>;
 140                                         type = "passive";
 141                                 };
 142                         };
 143                 };
 144
 145                 wifi-thermal {
 146                         polling-delay-passive = <0>;
 147                         polling-delay = <0>;
 148                         thermal-sensors = <&pm8150_adc_tm 1>;
 149
 150                         trips {
 151                                 active-config0 {
 152                                         temperature = <52000>;
 153                                         hysteresis = <4000>;
 154                                         type = "passive";
 155                                 };
 156                         };
 157                 };
 158
 159                 xo-thermal {
 160                         polling-delay-passive = <0>;
 161                         polling-delay = <0>;
 162                         thermal-sensors = <&pm8150_adc_tm 0>;
 163
 164                         trips {
 165                                 active-config0 {
 166                                         temperature = <50000>;
 167                                         hysteresis = <4000>;
 168                                         type = "passive";
 169                                 };
 170                         };
 171                 };
 172         };
 173
 174         vbat: vbat-regulator {
 175                 compatible = "regulator-fixed";
 176                 regulator-name = "VBAT";
 177                 vin-supply = <&vreg_l11c_3p3>;
 178                 regulator-min-microvolt = <4200000>;
 179                 regulator-max-microvolt = <4200000>;
 180                 regulator-always-on;
 181         };
 182
 183         vbat_som: vbat-som-regulator {
 184                 compatible = "regulator-fixed";
 185                 regulator-name = "VBAT_SOM";
 186                 vin-supply = <&dc12v>;
 187                 regulator-min-microvolt = <4200000>;
 188                 regulator-max-microvolt = <4200000>;
 189                 regulator-always-on;
 190         };
 191
 192         vdc_3v3: vdc-3v3-regulator {
 193                 compatible = "regulator-fixed";
 194                 regulator-name = "VDC_3V3";
 195                 vin-supply = <&vreg_l11c_3p3>;
 196                 regulator-min-microvolt = <3300000>;
 197                 regulator-max-microvolt = <3300000>;
 198                 regulator-always-on;
 199         };
 200
 201         vdc_5v: vdc-5v-regulator {
 202                 compatible = "regulator-fixed";
 203                 regulator-name = "VDC_5V";
 204
 205                 regulator-min-microvolt = <5000000>;
 206                 regulator-max-microvolt = <5000000>;
 207                 regulator-always-on;
 208                 vin-supply = <&vreg_l11c_3p3>;
 209         };
 210
 211         vph_pwr: vph-pwr-regulator {
 212                 compatible = "regulator-fixed";
 213                 regulator-name = "vph_pwr";
 214                 regulator-min-microvolt = <3700000>;
 215                 regulator-max-microvolt = <3700000>;
 216                 regulator-always-on;
 217         };
 218
 219         vreg_s4a_1p8: vreg-s4a-1p8 {
 220                 compatible = "regulator-fixed";
 221                 regulator-name = "vreg_s4a_1p8";
 222                 regulator-min-microvolt = <1800000>;
 223                 regulator-max-microvolt = <1800000>;
 224                 regulator-always-on;
 225         };
 226 };
 227
 228 &adsp {
 229         status = "okay";
 230         firmware-name = "qcom/sm8250/adsp.mbn";
 231 };
 232
 233 &apps_rsc {
 234         pm8009-rpmh-regulators {
 235                 compatible = "qcom,pm8009-1-rpmh-regulators";
 236                 qcom,pmic-id = "f";
 237
 238                 vdd-s1-supply = <&vph_pwr>;
 239                 vdd-s2-supply = <&vph_pwr>;
 240                 vdd-l2-supply = <&vreg_s8c_1p3>;
 241                 vdd-l5-l6-supply = <&vreg_bob>;
 242                 vdd-l7-supply = <&vreg_s4a_1p8>;
 243
 244                 vreg_s2f_0p95: smps2 {
 245                         regulator-name = "vreg_s2f_0p95";
 246                         regulator-min-microvolt = <900000>;
 247                         regulator-max-microvolt = <952000>;
 248                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 249                 };
 250
 251                 vreg_l1f_1p1: ldo1 {
 252                         regulator-name = "vreg_l1f_1p1";
 253                         regulator-min-microvolt = <1104000>;
 254                         regulator-max-microvolt = <1104000>;
 255                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 256                 };
 257
 258                 vreg_l2f_1p2: ldo2 {
 259                         regulator-name = "vreg_l2f_1p2";
 260                         regulator-min-microvolt = <1200000>;
 261                         regulator-max-microvolt = <1200000>;
 262                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 263                 };
 264
 265                 vreg_l6f_2p8: ldo6 {
 266                         regulator-name = "vreg_l6f_2p8";
 267                         regulator-min-microvolt = <2800000>;
 268                         regulator-max-microvolt = <2800000>;
 269                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 270                 };
 271
 272                 vreg_l7f_1p8: ldo7 {
 273                         regulator-name = "vreg_l7f_1p8";
 274                         regulator-min-microvolt = <1800000>;
 275                         regulator-max-microvolt = <1800000>;
 276                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 277                 };
 278         };
 279
 280         pm8150-rpmh-regulators {
 281                 compatible = "qcom,pm8150-rpmh-regulators";
 282                 qcom,pmic-id = "a";
 283
 284                 vdd-s1-supply = <&vph_pwr>;
 285                 vdd-s2-supply = <&vph_pwr>;
 286                 vdd-s3-supply = <&vph_pwr>;
 287                 vdd-s4-supply = <&vph_pwr>;
 288                 vdd-s5-supply = <&vph_pwr>;
 289                 vdd-s6-supply = <&vph_pwr>;
 290                 vdd-s7-supply = <&vph_pwr>;
 291                 vdd-s8-supply = <&vph_pwr>;
 292                 vdd-s9-supply = <&vph_pwr>;
 293                 vdd-s10-supply = <&vph_pwr>;
 294                 vdd-l2-l10-supply = <&vreg_bob>;
 295                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 296                 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
 297                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 298                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 299
 300                 vreg_l2a_3p1: ldo2 {
 301                         regulator-name = "vreg_l2a_3p1";
 302                         regulator-min-microvolt = <3072000>;
 303                         regulator-max-microvolt = <3072000>;
 304                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 305                 };
 306
 307                 vreg_l3a_0p9: ldo3 {
 308                         regulator-name = "vreg_l3a_0p9";
 309                         regulator-min-microvolt = <928000>;
 310                         regulator-max-microvolt = <932000>;
 311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 312                 };
 313
 314                 vreg_l5a_0p88: ldo5 {
 315                         regulator-name = "vreg_l5a_0p88";
 316                         regulator-min-microvolt = <880000>;
 317                         regulator-max-microvolt = <880000>;
 318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 319                 };
 320
 321                 vreg_l6a_1p2: ldo6 {
 322                         regulator-name = "vreg_l6a_1p2";
 323                         regulator-min-microvolt = <1200000>;
 324                         regulator-max-microvolt = <1200000>;
 325                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 326                 };
 327
 328                 vreg_l7a_1p7: ldo7 {
 329                         regulator-name = "vreg_l7a_1p7";
 330                         regulator-min-microvolt = <1704000>;
 331                         regulator-max-microvolt = <1800000>;
 332                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 333                 };
 334
 335                 vreg_l9a_1p2: ldo9 {
 336                         regulator-name = "vreg_l9a_1p2";
 337                         regulator-min-microvolt = <1200000>;
 338                         regulator-max-microvolt = <1200000>;
 339                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 340                 };
 341
 342                 vreg_l10a_1p8: ldo10 {
 343                         regulator-name = "vreg_l10a_1p8";
 344                         regulator-min-microvolt = <1800000>;
 345                         regulator-max-microvolt = <1800000>;
 346                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 347                 };
 348
 349                 vreg_l12a_1p8: ldo12 {
 350                         regulator-name = "vreg_l12a_1p8";
 351                         regulator-min-microvolt = <1800000>;
 352                         regulator-max-microvolt = <1800000>;
 353                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 354                 };
 355
 356                 vreg_l13a_ts_3p0: ldo13 {
 357                         regulator-name = "vreg_l13a_ts_3p0";
 358                         regulator-min-microvolt = <3008000>;
 359                         regulator-max-microvolt = <3008000>;
 360                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 361                 };
 362
 363                 vreg_l14a_1p8: ldo14 {
 364                         regulator-name = "vreg_l14a_1p8";
 365                         regulator-min-microvolt = <1800000>;
 366                         regulator-max-microvolt = <1880000>;
 367                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 368                 };
 369
 370                 vreg_l15a_1p8: ldo15 {
 371                         regulator-name = "vreg_l15a_1p8";
 372                         regulator-min-microvolt = <1800000>;
 373                         regulator-max-microvolt = <1800000>;
 374                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 375                 };
 376
 377                 vreg_l16a_2p7: ldo16 {
 378                         regulator-name = "vreg_l16a_2p7";
 379                         regulator-min-microvolt = <2704000>;
 380                         regulator-max-microvolt = <2960000>;
 381                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 382                 };
 383
 384                 vreg_l17a_3p0: ldo17 {
 385                         regulator-name = "vreg_l17a_3p0";
 386                         regulator-min-microvolt = <2856000>;
 387                         regulator-max-microvolt = <3008000>;
 388                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 389                 };
 390
 391                 vreg_l18a_0p92: ldo18 {
 392                         regulator-name = "vreg_l18a_0p92";
 393                         regulator-min-microvolt = <800000>;
 394                         regulator-max-microvolt = <912000>;
 395                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 396                 };
 397
 398                 vreg_s5a_1p9: smps5 {
 399                         regulator-name = "vreg_s5a_1p9";
 400                         regulator-min-microvolt = <1904000>;
 401                         regulator-max-microvolt = <2000000>;
 402                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 403                 };
 404
 405                 vreg_s6a_0p95: smps6 {
 406                         regulator-name = "vreg_s6a_0p95";
 407                         regulator-min-microvolt = <920000>;
 408                         regulator-max-microvolt = <1128000>;
 409                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 410                 };
 411         };
 412
 413         pm8150l-rpmh-regulators {
 414                 compatible = "qcom,pm8150l-rpmh-regulators";
 415                 qcom,pmic-id = "c";
 416
 417                 vdd-s1-supply = <&vph_pwr>;
 418                 vdd-s2-supply = <&vph_pwr>;
 419                 vdd-s3-supply = <&vph_pwr>;
 420                 vdd-s4-supply = <&vph_pwr>;
 421                 vdd-s5-supply = <&vph_pwr>;
 422                 vdd-s6-supply = <&vph_pwr>;
 423                 vdd-s7-supply = <&vph_pwr>;
 424                 vdd-s8-supply = <&vph_pwr>;
 425                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 426                 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
 427                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 428                 vdd-l7-l11-supply = <&vreg_bob>;
 429                 vdd-l9-l10-supply = <&vreg_bob>;
 430                 vdd-bob-supply = <&vph_pwr>;
 431
 432                 vreg_bob: bob {
 433                         regulator-name = "vreg_bob";
 434                         regulator-min-microvolt = <3008000>;
 435                         regulator-max-microvolt = <4000000>;
 436                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 437                 };
 438
 439                 vreg_l1c_1p8: ldo1 {
 440                         regulator-name = "vreg_l1c_1p8";
 441                         regulator-min-microvolt = <1800000>;
 442                         regulator-max-microvolt = <1800000>;
 443                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 444                 };
 445
 446                 vreg_l2c_1p2: ldo2 {
 447                         regulator-name = "vreg_l2c_1p2";
 448                         regulator-min-microvolt = <1200000>;
 449                         regulator-max-microvolt = <1200000>;
 450                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 451                 };
 452
 453                 vreg_l3c_0p8: ldo3 {
 454                         regulator-name = "vreg_l3c_0p8";
 455                         regulator-min-microvolt = <800000>;
 456                         regulator-max-microvolt = <800000>;
 457                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 458                 };
 459
 460                 vreg_l4c_1p7: ldo4 {
 461                         regulator-name = "vreg_l4c_1p7";
 462                         regulator-min-microvolt = <1704000>;
 463                         regulator-max-microvolt = <2928000>;
 464                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 465                 };
 466
 467                 vreg_l5c_1p8: ldo5 {
 468                         regulator-name = "vreg_l5c_1p8";
 469                         regulator-min-microvolt = <1800000>;
 470                         regulator-max-microvolt = <2928000>;
 471                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 472                 };
 473
 474                 vreg_l6c_2p96: ldo6 {
 475                         regulator-name = "vreg_l6c_2p96";
 476                         regulator-min-microvolt = <1800000>;
 477                         regulator-max-microvolt = <2960000>;
 478                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 479                 };
 480
 481                 vreg_l7c_cam_vcm0_2p85: ldo7 {
 482                         regulator-name = "vreg_l7c_cam_vcm0_2p85";
 483                         regulator-min-microvolt = <2856000>;
 484                         regulator-max-microvolt = <3104000>;
 485                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 486                 };
 487
 488                 vreg_l8c_1p8: ldo8 {
 489                         regulator-name = "vreg_l8c_1p8";
 490                         regulator-min-microvolt = <1800000>;
 491                         regulator-max-microvolt = <1800000>;
 492                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 493                 };
 494
 495                 vreg_l9c_2p96: ldo9 {
 496                         regulator-name = "vreg_l9c_2p96";
 497                         regulator-min-microvolt = <2704000>;
 498                         regulator-max-microvolt = <2960000>;
 499                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 500                 };
 501
 502                 vreg_l10c_3p0: ldo10 {
 503                         regulator-name = "vreg_l10c_3p0";
 504                         regulator-min-microvolt = <3000000>;
 505                         regulator-max-microvolt = <3000000>;
 506                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 507                 };
 508
 509                 vreg_l11c_3p3: ldo11 {
 510                         regulator-name = "vreg_l11c_3p3";
 511                         regulator-min-microvolt = <3296000>;
 512                         regulator-max-microvolt = <3296000>;
 513                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 514                         regulator-always-on;
 515                 };
 516
 517                 vreg_s8c_1p3: smps8 {
 518                         regulator-name = "vreg_s8c_1p3";
 519                         regulator-min-microvolt = <1352000>;
 520                         regulator-max-microvolt = <1352000>;
 521                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 522                 };
 523         };
 524 };
 525
 526 &cdsp {
 527         status = "okay";
 528         firmware-name = "qcom/sm8250/cdsp.mbn";
 529 };
 530
 531 &dsi0 {
 532         status = "okay";
 533         vdda-supply = <&vreg_l9a_1p2>;
 534
 535 #if 0
 536         qcom,dual-dsi-mode;
 537         qcom,master-dsi;
 538 #endif
 539
 540         ports {
 541                 port@1 {
 542                         endpoint {
 543                                 remote-endpoint = <&lt9611_a>;
 544                                 data-lanes = <0 1 2 3>;
 545                         };
 546                 };
 547         };
 548 };
 549
 550 &dsi0_phy {
 551         status = "okay";
 552         vdds-supply = <&vreg_l5a_0p88>;
 553 };
 554
 555 &gpu {
 556         zap-shader {
 557                 memory-region = <&gpu_mem>;
 558                 firmware-name = "qcom/sm8250/a650_zap.mbn";
 559         };
 560 };
 561
 562 /* LS-I2C0 */
 563 &i2c4 {
 564         status = "okay";
 565 };
 566
 567 &i2c5 {
 568         status = "okay";
 569         clock-frequency = <400000>;
 570
 571         lt9611_codec: hdmi-bridge@2b {
 572                 compatible = "lontium,lt9611uxc";
 573                 reg = <0x2b>;
 574                 #sound-dai-cells = <1>;
 575
 576                 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
 577
 578                 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
 579
 580                 vdd-supply = <&lt9611_1v2>;
 581                 vcc-supply = <&lt9611_3v3>;
 582
 583                 pinctrl-names = "default";
 584                 pinctrl-0 = <&lt9611_irq_pin &lt9611_rst_pin>;
 585
 586                 ports {
 587                         #address-cells = <1>;
 588                         #size-cells = <0>;
 589
 590                         port@0 {
 591                                 reg = <0>;
 592
 593                                 lt9611_a: endpoint {
 594                                         remote-endpoint = <&dsi0_out>;
 595                                 };
 596                         };
 597
 598 #if 0
 599                         port@1 {
 600                                 reg = <1>;
 601
 602                                 lt9611_b: endpoint {
 603                                         remote-endpoint = <&dsi1_out>;
 604                                 };
 605                         };
 606 #endif
 607
 608                         port@2 {
 609                                 reg = <2>;
 610
 611                                 lt9611_out: endpoint {
 612                                         remote-endpoint = <&hdmi_con>;
 613                                 };
 614                         };
 615
 616                 };
 617         };
 618 };
 619
 620 /* LS-I2C1 */
 621 &i2c15 {
 622         status = "okay";
 623 };
 624
 625 &mdss {
 626         status = "okay";
 627 };
 628
 629 &mdss_mdp {
 630         status = "okay";
 631 };
 632
 633 &pm8150_adc {
 634         xo-therm@4c {
 635                 reg = <ADC5_XO_THERM_100K_PU>;
 636                 qcom,ratiometric;
 637                 qcom,hw-settle-time = <200>;
 638         };
 639
 640         wifi-therm@4e {
 641                 reg = <ADC5_AMUX_THM2_100K_PU>;
 642                 qcom,ratiometric;
 643                 qcom,hw-settle-time = <200>;
 644         };
 645 };
 646
 647 &pm8150_adc_tm {
 648         status = "okay";
 649
 650         xo-therm@0 {
 651                 reg = <0>;
 652                 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
 653                 qcom,ratiometric;
 654                 qcom,hw-settle-time-us = <200>;
 655         };
 656
 657         wifi-therm@1 {
 658                 reg = <1>;
 659                 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
 660                 qcom,ratiometric;
 661                 qcom,hw-settle-time-us = <200>;
 662         };
 663 };
 664
 665 &pcie0 {
 666         status = "okay";
 667         perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
 668         wake-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 669         pinctrl-names = "default";
 670         pinctrl-0 = <&pcie0_default_state>;
 671 };
 672
 673 &pcie0_phy {
 674         status = "okay";
 675         vdda-phy-supply = <&vreg_l5a_0p88>;
 676         vdda-pll-supply = <&vreg_l9a_1p2>;
 677 };
 678
 679 &pcie1 {
 680         status = "okay";
 681         perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
 682         wake-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
 683         pinctrl-names = "default";
 684         pinctrl-0 = <&pcie1_default_state>;
 685 };
 686
 687 &pcie1_phy {
 688         status = "okay";
 689         vdda-phy-supply = <&vreg_l5a_0p88>;
 690         vdda-pll-supply = <&vreg_l9a_1p2>;
 691 };
 692
 693 &pcie2 {
 694         status = "okay";
 695         perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
 696         wake-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
 697         pinctrl-names = "default";
 698         pinctrl-0 = <&pcie2_default_state>;
 699 };
 700
 701 &pcie2_phy {
 702         status = "okay";
 703         vdda-phy-supply = <&vreg_l5a_0p88>;
 704         vdda-pll-supply = <&vreg_l9a_1p2>;
 705 };
 706
 707 &pm8150_gpios {
 708         gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
 709         gpio-line-names =
 710                 "NC",
 711                 "OPTION2",
 712                 "PM_GPIO-F",
 713                 "PM_SLP_CLK_IN",
 714                 "OPTION1",
 715                 "VOL_UP_N",
 716                 "PM8250_GPIO7", /* Blue LED */
 717                 "SP_ARI_PWR_ALARM",
 718                 "GPIO_9_P", /* Yellow LED */
 719                 "GPIO_10_P"; /* Green LED */
 720 };
 721
 722 &pm8150b_adc {
 723         conn-therm@4f {
 724                 reg = <ADC5_AMUX_THM3_100K_PU>;
 725                 qcom,ratiometric;
 726                 qcom,hw-settle-time = <200>;
 727         };
 728 };
 729
 730 &pm8150b_adc_tm {
 731         status = "okay";
 732
 733         conn-therm@0 {
 734                 reg = <0>;
 735                 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
 736                 qcom,ratiometric;
 737                 qcom,hw-settle-time-us = <200>;
 738         };
 739 };
 740
 741 &pm8150b_gpios {
 742         gpio-line-names =
 743                 "NC",
 744                 "NC",
 745                 "NC",
 746                 "NC",
 747                 "HAP_BOOST_EN", /* SOM */
 748                 "SMB_STAT", /* SOM */
 749                 "NC",
 750                 "NC",
 751                 "SDM_FORCE_USB_BOOT",
 752                 "NC",
 753                 "NC",
 754                 "NC";
 755 };
 756
 757 &pm8150l_adc {
 758         skin-msm-therm@4e {
 759                 reg = <ADC5_AMUX_THM2_100K_PU>;
 760                 qcom,ratiometric;
 761                 qcom,hw-settle-time = <200>;
 762         };
 763
 764         pm8150l-therm@4f {
 765                 reg = <ADC5_AMUX_THM3_100K_PU>;
 766                 qcom,ratiometric;
 767                 qcom,hw-settle-time = <200>;
 768         };
 769 };
 770
 771 &pm8150l_adc_tm {
 772         status = "okay";
 773
 774         skin-msm-therm@0 {
 775                 reg = <0>;
 776                 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
 777                 qcom,ratiometric;
 778                 qcom,hw-settle-time-us = <200>;
 779         };
 780
 781         pm8150l-therm@1 {
 782                 reg = <1>;
 783                 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
 784                 qcom,ratiometric;
 785                 qcom,hw-settle-time-us = <200>;
 786         };
 787 };
 788
 789 &pm8150l_gpios {
 790         gpio-line-names =
 791                 "NC",
 792                 "PM3003A_EN",
 793                 "NC",
 794                 "NC",
 795                 "PM_GPIO5", /* HDMI RST_N */
 796                 "PM_GPIO-A", /* PWM */
 797                 "PM_GPIO7",
 798                 "NC",
 799                 "NC",
 800                 "PM_GPIO-B",
 801                 "NC",
 802                 "PM3003A_MODE";
 803
 804         lt9611_rst_pin: lt9611-rst-pin {
 805                 pins = "gpio5";
 806                 function = "normal";
 807
 808                 output-high;
 809                 input-disable;
 810                 power-source = <0>;
 811         };
 812 };
 813
 814 &qupv3_id_0 {
 815         status = "okay";
 816 };
 817
 818 &qupv3_id_1 {
 819         status = "okay";
 820 };
 821
 822 &qupv3_id_2 {
 823         status = "okay";
 824 };
 825
 826 &q6afedai {
 827         qi2s@16 {
 828                 reg = <16>;
 829                 qcom,sd-lines = <0 1 2 3>;
 830         };
 831 };
 832
 833 /* TERT I2S Uses 1 I2S SD Lines for audio on LT9611 HDMI Bridge */
 834 &q6afedai {
 835         qi2s@20 {
 836                 reg = <20>;
 837                 qcom,sd-lines = <0>;
 838         };
 839 };
 840
 841 &q6asmdai {
 842         dai@0 {
 843                 reg = <0>;
 844         };
 845
 846         dai@1 {
 847                 reg = <1>;
 848         };
 849
 850         dai@2 {
 851                 reg = <2>;
 852         };
 853 };
 854
 855 &sdhc_2 {
 856         status = "okay";
 857         pinctrl-names = "default";
 858         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 859         vmmc-supply = <&vreg_l9c_2p96>;
 860         vqmmc-supply = <&vreg_l6c_2p96>;
 861         cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 862         bus-width = <4>;
 863         no-sdio;
 864         no-emmc;
 865 };
 866
 867 &sound {
 868         compatible = "qcom,qrb5165-rb5-sndcard";
 869         pinctrl-0 = <&tert_mi2s_active>;
 870         pinctrl-names = "default";
 871         model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
 872         audio-routing =
 873                 "SpkrLeft IN", "WSA_SPK1 OUT",
 874                 "SpkrRight IN", "WSA_SPK2 OUT",
 875                 "VA DMIC0", "vdd-micb",
 876                 "VA DMIC1", "vdd-micb",
 877                 "MM_DL1",  "MultiMedia1 Playback",
 878                 "MM_DL2",  "MultiMedia2 Playback",
 879                 "MultiMedia3 Capture", "MM_UL3";
 880
 881         mm1-dai-link {
 882                 link-name = "MultiMedia1";
 883                 cpu {
 884                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
 885                 };
 886         };
 887
 888         mm2-dai-link {
 889                 link-name = "MultiMedia2";
 890                 cpu {
 891                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
 892                 };
 893         };
 894
 895         mm3-dai-link {
 896                 link-name = "MultiMedia3";
 897                 cpu {
 898                         sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
 899                 };
 900         };
 901
 902         hdmi-dai-link {
 903                 link-name = "HDMI Playback";
 904                 cpu {
 905                         sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
 906                 };
 907
 908                 platform {
 909                         sound-dai = <&q6routing>;
 910                 };
 911
 912                 codec {
 913                         sound-dai =  <&lt9611_codec 0>;
 914                 };
 915         };
 916
 917         dma-dai-link {
 918                 link-name = "WSA Playback";
 919                 cpu {
 920                         sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
 921                 };
 922
 923                 platform {
 924                         sound-dai = <&q6routing>;
 925                 };
 926
 927                 codec {
 928                         sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
 929                 };
 930         };
 931
 932         va-dai-link {
 933                 link-name = "VA Capture";
 934                 cpu {
 935                         sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
 936                 };
 937
 938                 platform {
 939                         sound-dai = <&q6routing>;
 940                 };
 941
 942                 codec {
 943                         sound-dai = <&vamacro 0>;
 944                 };
 945         };
 946 };
 947
 948 /* CAN */
 949 &spi0 {
 950         status = "okay";
 951         pinctrl-names = "default";
 952         pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
 953         cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
 954
 955         can@0 {
 956                 compatible = "microchip,mcp2518fd";
 957                 reg = <0>;
 958                 clocks = <&clk40M>;
 959                 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
 960                 spi-max-frequency = <10000000>;
 961                 vdd-supply = <&vdc_5v>;
 962                 xceiver-supply = <&vdc_5v>;
 963         };
 964 };
 965
 966 &swr0 {
 967         left_spkr: wsa8810-left{
 968                 compatible = "sdw10217211000";
 969                 reg = <0 3>;
 970                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 971                 #thermal-sensor-cells = <0>;
 972                 sound-name-prefix = "SpkrLeft";
 973                 #sound-dai-cells = <0>;
 974         };
 975
 976         right_spkr: wsa8810-right{
 977                 compatible = "sdw10217211000";
 978                 reg = <0 4>;
 979                 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
 980                 #thermal-sensor-cells = <0>;
 981                 sound-name-prefix = "SpkrRight";
 982                 #sound-dai-cells = <0>;
 983         };
 984 };
 985
 986 &tlmm {
 987         gpio-reserved-ranges = <40 4>;
 988         gpio-line-names =
 989                 "GPIO-MM",
 990                 "GPIO-NN",
 991                 "GPIO-OO",
 992                 "GPIO-PP",
 993                 "GPIO-A",
 994                 "GPIO-C",
 995                 "GPIO-E",
 996                 "GPIO-D",
 997                 "I2C0-SDA",
 998                 "I2C0-SCL",
 999                 "GPIO-TT", /* GPIO_10 */
1000                 "NC",
1001                 "GPIO_12_I2C_SDA",
1002                 "GPIO_13_I2C_SCL",
1003                 "GPIO-X",
1004                 "GPIO_15_RGMII_INT",
1005                 "HST_BT_UART_CTS",
1006                 "HST_BT_UART_RFR",
1007                 "HST_BT_UART_TX",
1008                 "HST_BT_UART_RX",
1009                 "HST_WLAN_EN", /* GPIO_20 */
1010                 "HST_BT_EN",
1011                 "GPIO-AAA",
1012                 "GPIO-BBB",
1013                 "GPIO-CCC",
1014                 "GPIO-Z",
1015                 "GPIO-DDD",
1016                 "GPIO-BB",
1017                 "GPIO_28_CAN_SPI_MISO",
1018                 "GPIO_29_CAN_SPI_MOSI",
1019                 "GPIO_30_CAN_SPI_CLK", /* GPIO_30 */
1020                 "GPIO_31_CAN_SPI_CS",
1021                 "GPIO-UU",
1022                 "NC",
1023                 "UART1_TXD_SOM",
1024                 "UART1_RXD_SOM",
1025                 "UART0_CTS",
1026                 "UART0_RTS",
1027                 "UART0_TXD",
1028                 "UART0_RXD",
1029                 "SPI1_MISO", /* GPIO_40 */
1030                 "SPI1_MOSI",
1031                 "SPI1_CLK",
1032                 "SPI1_CS",
1033                 "I2C1_SDA",
1034                 "I2C1_SCL",
1035                 "GPIO-F",
1036                 "GPIO-JJ",
1037                 "Board_ID1",
1038                 "Board_ID2",
1039                 "NC", /* GPIO_50 */
1040                 "NC",
1041                 "SPI0_MISO",
1042                 "SPI0_MOSI",
1043                 "SPI0_SCLK",
1044                 "SPI0_CS",
1045                 "GPIO-QQ",
1046                 "GPIO-RR",
1047                 "USB2LAN_RESET",
1048                 "USB2LAN_EXTWAKE",
1049                 "NC", /* GPIO_60 */
1050                 "NC",
1051                 "NC",
1052                 "LT9611_INT",
1053                 "GPIO-AA",
1054                 "USB_CC_DIR",
1055                 "GPIO-G",
1056                 "GPIO-LL",
1057                 "USB_DP_HPD_1P8",
1058                 "NC",
1059                 "NC", /* GPIO_70 */
1060                 "SD_CMD",
1061                 "SD_DAT3",
1062                 "SD_SCLK",
1063                 "SD_DAT2",
1064                 "SD_DAT1",
1065                 "SD_DAT0", /* BOOT_CFG3 */
1066                 "SD_UFS_CARD_DET_N",
1067                 "GPIO-II",
1068                 "PCIE0_RST_N",
1069                 "PCIE0_CLK_REQ_N", /* GPIO_80 */
1070                 "PCIE0_WAKE_N",
1071                 "GPIO-CC",
1072                 "GPIO-DD",
1073                 "GPIO-EE",
1074                 "GPIO-FF",
1075                 "GPIO-GG",
1076                 "GPIO-HH",
1077                 "GPIO-VV",
1078                 "GPIO-WW",
1079                 "NC", /* GPIO_90 */
1080                 "NC",
1081                 "GPIO-K",
1082                 "GPIO-I",
1083                 "CSI0_MCLK",
1084                 "CSI1_MCLK",
1085                 "CSI2_MCLK",
1086                 "CSI3_MCLK",
1087                 "GPIO-AA", /* CSI4_MCLK */
1088                 "GPIO-BB", /* CSI5_MCLK */
1089                 "GPIO-KK", /* GPIO_100 */
1090                 "CCI_I2C_SDA0",
1091                 "CCI_I2C_SCL0",
1092                 "CCI_I2C_SDA1",
1093                 "CCI_I2C_SCL1",
1094                 "CCI_I2C_SDA2",
1095                 "CCI_I2C_SCL2",
1096                 "CCI_I2C_SDA3",
1097                 "CCI_I2C_SCL3",
1098                 "GPIO-L",
1099                 "NC", /* GPIO_110 */
1100                 "NC",
1101                 "ACCEL_INT",
1102                 "GYRO_INT",
1103                 "GPIO-J",
1104                 "GPIO-YY",
1105                 "GPIO-H",
1106                 "GPIO-ZZ",
1107                 "NC",
1108                 "NC",
1109                 "NC", /* GPIO_120 */
1110                 "NC",
1111                 "MAG_INT",
1112                 "MAG_DRDY_INT",
1113                 "HST_SW_CTRL",
1114                 "GPIO-M",
1115                 "GPIO-N",
1116                 "GPIO-O",
1117                 "GPIO-P",
1118                 "PS_INT",
1119                 "WSA1_EN", /* GPIO_130 */
1120                 "USB_HUB_RESET",
1121                 "SDM_FORCE_USB_BOOT",
1122                 "I2S1_CLK_HDMI",
1123                 "I2S1_DATA0_HDMI",
1124                 "I2S1_WS_HDMI",
1125                 "GPIO-B",
1126                 "GPIO_137", /* To LT9611_I2S_MCLK_3V3 */
1127                 "PCM_CLK",
1128                 "PCM_DI",
1129                 "PCM_DO", /* GPIO_140 */
1130                 "PCM_FS",
1131                 "HST_SLIM_CLK",
1132                 "HST_SLIM_DATA",
1133                 "GPIO-U",
1134                 "GPIO-Y",
1135                 "GPIO-R",
1136                 "GPIO-Q",
1137                 "GPIO-S",
1138                 "GPIO-T",
1139                 "GPIO-V", /* GPIO_150 */
1140                 "GPIO-W",
1141                 "DMIC_CLK1",
1142                 "DMIC_DATA1",
1143                 "DMIC_CLK2",
1144                 "DMIC_DATA2",
1145                 "WSA_SWR_CLK",
1146                 "WSA_SWR_DATA",
1147                 "DMIC_CLK3",
1148                 "DMIC_DATA3",
1149                 "I2C4_SDA", /* GPIO_160 */
1150                 "I2C4_SCL",
1151                 "SPI3_CS1",
1152                 "SPI3_CS2",
1153                 "SPI2_MISO_LS3",
1154                 "SPI2_MOSI_LS3",
1155                 "SPI2_CLK_LS3",
1156                 "SPI2_ACCEL_CS_LS3",
1157                 "SPI2_CS1",
1158                 "NC",
1159                 "GPIO-SS", /* GPIO_170 */
1160                 "GPIO-XX",
1161                 "SPI3_MISO",
1162                 "SPI3_MOSI",
1163                 "SPI3_CLK",
1164                 "SPI3_CS",
1165                 "HST_BLE_SNS_UART_TX",
1166                 "HST_BLE_SNS_UART_RX",
1167                 "HST_WLAN_UART_TX",
1168                 "HST_WLAN_UART_RX";
1169
1170         lt9611_irq_pin: lt9611-irq {
1171                 pins = "gpio63";
1172                 function = "gpio";
1173                 bias-disable;
1174         };
1175
1176         pcie0_default_state: pcie0-default {
1177                 clkreq {
1178                         pins = "gpio80";
1179                         function = "pci_e0";
1180                         bias-pull-up;
1181                 };
1182
1183                 reset-n {
1184                         pins = "gpio79";
1185                         function = "gpio";
1186
1187                         drive-strength = <2>;
1188                         output-low;
1189                         bias-pull-down;
1190                 };
1191
1192                 wake-n {
1193                         pins = "gpio81";
1194                         function = "gpio";
1195
1196                         drive-strength = <2>;
1197                         bias-pull-up;
1198                 };
1199         };
1200
1201         pcie1_default_state: pcie1-default {
1202                 clkreq {
1203                         pins = "gpio83";
1204                         function = "pci_e1";
1205                         bias-pull-up;
1206                 };
1207
1208                 reset-n {
1209                         pins = "gpio82";
1210                         function = "gpio";
1211
1212                         drive-strength = <2>;
1213                         output-low;
1214                         bias-pull-down;
1215                 };
1216
1217                 wake-n {
1218                         pins = "gpio84";
1219                         function = "gpio";
1220
1221                         drive-strength = <2>;
1222                         bias-pull-up;
1223                 };
1224         };
1225
1226         pcie2_default_state: pcie2-default {
1227                 clkreq {
1228                         pins = "gpio86";
1229                         function = "pci_e2";
1230                         bias-pull-up;
1231                 };
1232
1233                 reset-n {
1234                         pins = "gpio85";
1235                         function = "gpio";
1236
1237                         drive-strength = <2>;
1238                         output-low;
1239                         bias-pull-down;
1240                 };
1241
1242                 wake-n {
1243                         pins = "gpio87";
1244                         function = "gpio";
1245
1246                         drive-strength = <2>;
1247                         bias-pull-up;
1248                 };
1249         };
1250
1251         sdc2_default_state: sdc2-default {
1252                 clk {
1253                         pins = "sdc2_clk";
1254                         bias-disable;
1255                         drive-strength = <16>;
1256                 };
1257
1258                 cmd {
1259                         pins = "sdc2_cmd";
1260                         bias-pull-up;
1261                         drive-strength = <10>;
1262                 };
1263
1264                 data {
1265                         pins = "sdc2_data";
1266                         bias-pull-up;
1267                         drive-strength = <10>;
1268                 };
1269         };
1270
1271         sdc2_card_det_n: sd-card-det-n {
1272                 pins = "gpio77";
1273                 function = "gpio";
1274                 bias-pull-up;
1275         };
1276 };
1277
1278 &uart12 {
1279         status = "okay";
1280 };
1281
1282 &ufs_mem_hc {
1283         status = "okay";
1284
1285         vcc-supply = <&vreg_l17a_3p0>;
1286         vcc-max-microamp = <800000>;
1287         vccq-supply = <&vreg_l6a_1p2>;
1288         vccq-max-microamp = <800000>;
1289         vccq2-supply = <&vreg_s4a_1p8>;
1290         vccq2-max-microamp = <800000>;
1291 };
1292
1293 &ufs_mem_phy {
1294         status = "okay";
1295
1296         vdda-phy-supply = <&vreg_l5a_0p88>;
1297         vdda-max-microamp = <89900>;
1298         vdda-pll-supply = <&vreg_l9a_1p2>;
1299         vdda-pll-max-microamp = <18800>;
1300 };
1301
1302 &usb_1 {
1303         status = "okay";
1304 };
1305
1306 &usb_1_dwc3 {
1307         dr_mode = "peripheral";
1308 };
1309
1310 &usb_1_hsphy {
1311         status = "okay";
1312
1313         vdda-pll-supply = <&vreg_l5a_0p88>;
1314         vdda33-supply = <&vreg_l2a_3p1>;
1315         vdda18-supply = <&vreg_l12a_1p8>;
1316 };
1317
1318 &usb_1_qmpphy {
1319         status = "okay";
1320
1321         vdda-phy-supply = <&vreg_l9a_1p2>;
1322         vdda-pll-supply = <&vreg_l18a_0p92>;
1323 };
1324
1325 &usb_2 {
1326         status = "okay";
1327 };
1328
1329 &usb_2_dwc3 {
1330         dr_mode = "host";
1331 };
1332
1333 &usb_2_hsphy {
1334         status = "okay";
1335
1336         vdda-pll-supply = <&vreg_l5a_0p88>;
1337         vdda33-supply = <&vreg_l2a_3p1>;
1338         vdda18-supply = <&vreg_l12a_1p8>;
1339 };
1340
1341 &usb_2_qmpphy {
1342         status = "okay";
1343
1344         vdda-phy-supply = <&vreg_l9a_1p2>;
1345         vdda-pll-supply = <&vreg_l18a_0p92>;
1346 };
1347
1348 &vamacro {
1349         pinctrl-0 = <&dmic01_active>;
1350         pinctrl-names = "default";
1351         vdd-micb-supply = <&vreg_s4a_1p8>;
1352         qcom,dmic-sample-rate = <600000>;
1353 };
1354
1355 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1356 &qup_spi0_cs_gpio {
1357         drive-strength = <6>;
1358         bias-disable;
1359 };
1360
1361 &qup_spi0_data_clk {
1362         drive-strength = <6>;
1363         bias-disable;
1364 };