arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-pm8916.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   8
   9 / {
  10         aliases {
  11                 serial0 = &blsp1_uart2;
  12         };
  13
  14         chosen {
  15                 stdout-path = "serial0";
  16         };
  17
  18         reserved-memory {
  19                 /* Additional memory used by Samsung firmware modifications */
  20                 tz-apps@85500000 {
  21                         reg = <0x0 0x85500000 0x0 0xb00000>;
  22                         no-map;
  23                 };
  24         };
  25
  26         gpio-keys {
  27                 compatible = "gpio-keys";
  28
  29                 pinctrl-names = "default";
  30                 pinctrl-0 = <&gpio_keys_default>;
  31
  32                 label = "GPIO Buttons";
  33
  34                 volume-up {
  35                         label = "Volume Up";
  36                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_VOLUMEUP>;
  38                 };
  39
  40                 home {
  41                         label = "Home";
  42                         gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
  43                         linux,code = <KEY_HOMEPAGE>;
  44                 };
  45         };
  46
  47         gpio-hall-sensor {
  48                 compatible = "gpio-keys";
  49
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&gpio_hall_sensor_default>;
  52
  53                 label = "GPIO Hall Effect Sensor";
  54
  55                 hall-sensor {
  56                         label = "Hall Effect Sensor";
  57                         gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
  58                         linux,input-type = <EV_SW>;
  59                         linux,code = <SW_LID>;
  60                         linux,can-disable;
  61                 };
  62         };
  63
  64         reg_vdd_tsp: regulator-vdd-tsp {
  65                 compatible = "regulator-fixed";
  66                 regulator-name = "vdd_tsp";
  67                 regulator-min-microvolt = <3300000>;
  68                 regulator-max-microvolt = <3300000>;
  69
  70                 gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
  71                 enable-active-high;
  72
  73                 pinctrl-names = "default";
  74                 pinctrl-0 = <&tsp_en_default>;
  75         };
  76
  77         i2c-muic {
  78                 compatible = "i2c-gpio";
  79                 sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  80                 scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
  81
  82                 pinctrl-names = "default";
  83                 pinctrl-0 = <&muic_i2c_default>;
  84
  85                 #address-cells = <1>;
  86                 #size-cells = <0>;
  87
  88                 muic: extcon@25 {
  89                         compatible = "siliconmitus,sm5502-muic";
  90
  91                         reg = <0x25>;
  92                         interrupt-parent = <&msmgpio>;
  93                         interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
  94
  95                         pinctrl-names = "default";
  96                         pinctrl-0 = <&muic_int_default>;
  97                 };
  98         };
  99
 100         i2c-tkey {
 101                 compatible = "i2c-gpio";
 102                 sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 103                 scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 104
 105                 pinctrl-names = "default";
 106                 pinctrl-0 = <&tkey_i2c_default>;
 107
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110
 111                 touchkey: touchkey@20 {
 112                         /* Note: Actually an ABOV MCU that implements same interface */
 113                         compatible = "coreriver,tc360-touchkey";
 114                         reg = <0x20>;
 115
 116                         interrupt-parent = <&msmgpio>;
 117                         interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
 118
 119                         /* vcc/vdd-supply are board-specific */
 120                         vddio-supply = <&pm8916_l6>;
 121
 122                         linux,keycodes = <KEY_APPSELECT KEY_BACK>;
 123
 124                         pinctrl-names = "default";
 125                         pinctrl-0 = <&tkey_default>;
 126                 };
 127         };
 128
 129         i2c-nfc {
 130                 compatible = "i2c-gpio";
 131                 sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 132                 scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 133
 134                 pinctrl-names = "default";
 135                 pinctrl-0 = <&nfc_i2c_default>;
 136
 137                 #address-cells = <1>;
 138                 #size-cells = <0>;
 139
 140                 nfc@27 {
 141                         compatible = "samsung,s3fwrn5-i2c";
 142                         reg = <0x27>;
 143
 144                         interrupt-parent = <&msmgpio>;
 145                         interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 146
 147                         en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
 148                         wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
 149
 150                         clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
 151
 152                         pinctrl-names = "default";
 153                         pinctrl-0 = <&nfc_default &nfc_clk_req>;
 154                 };
 155         };
 156 };
 157
 158 &blsp_i2c2 {
 159         status = "okay";
 160
 161         accelerometer: accelerometer@10 {
 162                 compatible = "bosch,bmc150_accel";
 163                 reg = <0x10>;
 164                 interrupt-parent = <&msmgpio>;
 165                 interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 166
 167                 vdd-supply = <&pm8916_l17>;
 168                 vddio-supply = <&pm8916_l5>;
 169
 170                 pinctrl-names = "default";
 171                 pinctrl-0 = <&accel_int_default>;
 172         };
 173
 174         magnetometer@12 {
 175                 compatible = "bosch,bmc150_magn";
 176                 reg = <0x12>;
 177
 178                 vdd-supply = <&pm8916_l17>;
 179                 vddio-supply = <&pm8916_l5>;
 180         };
 181 };
 182
 183 &blsp_i2c4 {
 184         status = "okay";
 185
 186         battery@35 {
 187                 compatible = "richtek,rt5033-battery";
 188                 reg = <0x35>;
 189                 interrupt-parent = <&msmgpio>;
 190                 interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
 191
 192                 pinctrl-names = "default";
 193                 pinctrl-0 = <&fg_alert_default>;
 194         };
 195 };
 196
 197 &blsp1_uart2 {
 198         status = "okay";
 199 };
 200
 201 &dsi0 {
 202         pinctrl-names = "default", "sleep";
 203         pinctrl-0 = <&mdss_default>;
 204         pinctrl-1 = <&mdss_sleep>;
 205 };
 206
 207 &mdss {
 208         status = "okay";
 209 };
 210
 211 &pm8916_resin {
 212         status = "okay";
 213         linux,code = <KEY_VOLUMEDOWN>;
 214 };
 215
 216 &pronto {
 217         status = "okay";
 218 };
 219
 220 &sdhc_1 {
 221         status = "okay";
 222
 223         pinctrl-names = "default", "sleep";
 224         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 225         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 226 };
 227
 228 &sdhc_2 {
 229         status = "okay";
 230
 231         pinctrl-names = "default", "sleep";
 232         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 233         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 234
 235         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 236 };
 237
 238 &usb {
 239         status = "okay";
 240         extcon = <&muic>, <&muic>;
 241 };
 242
 243 &usb_hs_phy {
 244         extcon = <&muic>;
 245 };
 246
 247 &smd_rpm_regulators {
 248         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 249         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 250         vdd_l7-supply = <&pm8916_s4>;
 251
 252         s3 {
 253                 regulator-min-microvolt = <1200000>;
 254                 regulator-max-microvolt = <1300000>;
 255         };
 256
 257         s4 {
 258                 regulator-min-microvolt = <1800000>;
 259                 regulator-max-microvolt = <2100000>;
 260         };
 261
 262         l1 {
 263                 regulator-min-microvolt = <1225000>;
 264                 regulator-max-microvolt = <1225000>;
 265         };
 266
 267         l2 {
 268                 regulator-min-microvolt = <1200000>;
 269                 regulator-max-microvolt = <1200000>;
 270         };
 271
 272         l4 {
 273                 regulator-min-microvolt = <2050000>;
 274                 regulator-max-microvolt = <2050000>;
 275         };
 276
 277         l5 {
 278                 regulator-min-microvolt = <1800000>;
 279                 regulator-max-microvolt = <1800000>;
 280         };
 281
 282         l6 {
 283                 regulator-min-microvolt = <1800000>;
 284                 regulator-max-microvolt = <1800000>;
 285         };
 286
 287         l7 {
 288                 regulator-min-microvolt = <1800000>;
 289                 regulator-max-microvolt = <1800000>;
 290         };
 291
 292         l8 {
 293                 regulator-min-microvolt = <2850000>;
 294                 regulator-max-microvolt = <2900000>;
 295         };
 296
 297         l9 {
 298                 regulator-min-microvolt = <3300000>;
 299                 regulator-max-microvolt = <3300000>;
 300         };
 301
 302         l10 {
 303                 regulator-min-microvolt = <2700000>;
 304                 regulator-max-microvolt = <2800000>;
 305         };
 306
 307         l11 {
 308                 regulator-min-microvolt = <1800000>;
 309                 regulator-max-microvolt = <2950000>;
 310                 regulator-allow-set-load;
 311                 regulator-system-load = <200000>;
 312         };
 313
 314         l12 {
 315                 regulator-min-microvolt = <1800000>;
 316                 regulator-max-microvolt = <2950000>;
 317         };
 318
 319         l13 {
 320                 regulator-min-microvolt = <3075000>;
 321                 regulator-max-microvolt = <3075000>;
 322         };
 323
 324         l14 {
 325                 regulator-min-microvolt = <1800000>;
 326                 regulator-max-microvolt = <3300000>;
 327         };
 328
 329         l15 {
 330                 regulator-min-microvolt = <1800000>;
 331                 regulator-max-microvolt = <3300000>;
 332         };
 333
 334         l16 {
 335                 regulator-min-microvolt = <1800000>;
 336                 regulator-max-microvolt = <3300000>;
 337         };
 338
 339         l17 {
 340                 regulator-min-microvolt = <2850000>;
 341                 regulator-max-microvolt = <2850000>;
 342         };
 343
 344         l18 {
 345                 regulator-min-microvolt = <2700000>;
 346                 regulator-max-microvolt = <2700000>;
 347         };
 348 };
 349
 350 &msmgpio {
 351         accel_int_default: accel-int-default {
 352                 pins = "gpio115";
 353                 function = "gpio";
 354
 355                 drive-strength = <2>;
 356                 bias-disable;
 357         };
 358
 359         fg_alert_default: fg-alert-default {
 360                 pins = "gpio121";
 361                 function = "gpio";
 362
 363                 drive-strength = <2>;
 364                 bias-disable;
 365         };
 366
 367         gpio_keys_default: gpio-keys-default {
 368                 pins = "gpio107", "gpio109";
 369                 function = "gpio";
 370
 371                 drive-strength = <2>;
 372                 bias-pull-up;
 373         };
 374
 375         gpio_hall_sensor_default: gpio-hall-sensor-default {
 376                 pins = "gpio52";
 377                 function = "gpio";
 378
 379                 drive-strength = <2>;
 380                 bias-disable;
 381         };
 382
 383         mdss {
 384                 mdss_default: mdss-default {
 385                         pins = "gpio25";
 386                         function = "gpio";
 387
 388                         drive-strength = <8>;
 389                         bias-disable;
 390                 };
 391                 mdss_sleep: mdss-sleep {
 392                         pins = "gpio25";
 393                         function = "gpio";
 394
 395                         drive-strength = <2>;
 396                         bias-pull-down;
 397                 };
 398         };
 399
 400         muic_i2c_default: muic-i2c-default {
 401                 pins = "gpio105", "gpio106";
 402                 function = "gpio";
 403
 404                 drive-strength = <2>;
 405                 bias-disable;
 406         };
 407
 408         muic_int_default: muic-int-default {
 409                 pins = "gpio12";
 410                 function = "gpio";
 411
 412                 drive-strength = <2>;
 413                 bias-disable;
 414         };
 415
 416         nfc_default: nfc-default {
 417                 pins = "gpio20", "gpio49";
 418                 function = "gpio";
 419
 420                 drive-strength = <2>;
 421                 bias-disable;
 422
 423                 irq {
 424                         pins = "gpio21";
 425                         function = "gpio";
 426
 427                         drive-strength = <2>;
 428                         bias-pull-down;
 429                 };
 430         };
 431
 432         nfc_i2c_default: nfc-i2c-default {
 433                 pins = "gpio0", "gpio1";
 434                 function = "gpio";
 435
 436                 drive-strength = <2>;
 437                 bias-disable;
 438         };
 439
 440         tkey_default: tkey-default {
 441                 pins = "gpio98";
 442                 function = "gpio";
 443
 444                 drive-strength = <2>;
 445                 bias-disable;
 446         };
 447
 448         tkey_i2c_default: tkey-i2c-default {
 449                 pins = "gpio16", "gpio17";
 450                 function = "gpio";
 451
 452                 drive-strength = <2>;
 453                 bias-disable;
 454         };
 455
 456         tsp_en_default: tsp-en-default {
 457                 pins = "gpio73";
 458                 function = "gpio";
 459
 460                 drive-strength = <2>;
 461                 bias-disable;
 462         };
 463 };
 464
 465 &pm8916_gpios {
 466         nfc_clk_req: nfc-clk-req {
 467                 pins = "gpio2";
 468                 function = "func1";
 469
 470                 input-enable;
 471                 bias-disable;
 472                 power-source = <PM8916_GPIO_L2>;
 473         };
 474 };