arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * IPQ6018 CP01 board device tree source
   4  *
   5  * Copyright (c) 2019, The Linux Foundation. All rights reserved.
   6  */
   7
   8 /dts-v1/;
   9
  10 #include "ipq6018.dtsi"
  11
  12 / {
  13         model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1";
  14         compatible = "qcom,ipq6018-cp01", "qcom,ipq6018";
  15
  16         aliases {
  17                 serial0 = &blsp1_uart3;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22         };
  23 };
  24
  25 &blsp1_uart3 {
  26         pinctrl-0 = <&serial_3_pins>;
  27         pinctrl-names = "default";
  28         status = "okay";
  29 };
  30
  31 &blsp1_i2c3 {
  32         pinctrl-0 = <&i2c_1_pins>;
  33         pinctrl-names = "default";
  34         status = "okay";
  35 };
  36
  37 &blsp1_spi1 {
  38         pinctrl-0 = <&spi_0_pins>;
  39         pinctrl-names = "default";
  40         status = "okay";
  41
  42         flash@0 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 reg = <0>;
  46                 compatible = "micron,n25q128a11", "jedec,spi-nor";
  47                 spi-max-frequency = <50000000>;
  48         };
  49 };
  50
  51 &tlmm {
  52         i2c_1_pins: i2c-1-state {
  53                 pins = "gpio42", "gpio43";
  54                 function = "blsp2_i2c";
  55                 drive-strength = <8>;
  56         };
  57
  58         spi_0_pins: spi-0-state {
  59                 pins = "gpio38", "gpio39", "gpio40", "gpio41";
  60                 function = "blsp0_spi";
  61                 drive-strength = <8>;
  62                 bias-pull-down;
  63         };
  64 };
  65
  66 &qpic_bam {
  67         status = "okay";
  68 };
  69
  70 &qpic_nand {
  71         status = "okay";
  72
  73         nand@0 {
  74                 reg = <0>;
  75
  76                 nand-ecc-strength = <4>;
  77                 nand-ecc-step-size = <512>;
  78                 nand-bus-width = <8>;
  79         };
  80 };
  81
  82 &qusb_phy_1 {
  83         status = "okay";
  84 };
  85
  86 &usb2 {
  87         status = "okay";
  88 };