Merge branch 'next' into for-linus
[linux-2.6-microblaze.git] / arch / arm64 / boot / dts / nvidia / tegra194-p3668.dtsi
1 // SPDX-License-Identifier: GPL-2.0
2 #include "tegra194.dtsi"
3
4 #include <dt-bindings/mfd/max77620.h>
5
6 / {
7         aliases {
8                 ethernet0 = "/bus@0/ethernet@2490000";
9                 i2c0 = "/bpmp/i2c";
10                 i2c1 = "/bus@0/i2c@3160000";
11                 i2c2 = "/bus@0/i2c@c240000";
12                 i2c3 = "/bus@0/i2c@3180000";
13                 i2c4 = "/bus@0/i2c@3190000";
14                 i2c5 = "/bus@0/i2c@31c0000";
15                 i2c6 = "/bus@0/i2c@c250000";
16                 i2c7 = "/bus@0/i2c@31e0000";
17                 mmc0 = "/bus@0/mmc@3460000";
18                 rtc0 = "/bpmp/i2c/pmic@3c";
19                 rtc1 = "/bus@0/rtc@c2a0000";
20                 serial0 = &tcu;
21         };
22
23         chosen {
24                 bootargs = "console=ttyS0,115200n8";
25                 stdout-path = "serial0:115200n8";
26         };
27
28         bus@0 {
29                 ethernet@2490000 {
30                         status = "okay";
31
32                         phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
33                         phy-handle = <&phy>;
34                         phy-mode = "rgmii-id";
35
36                         mdio {
37                                 #address-cells = <1>;
38                                 #size-cells = <0>;
39
40                                 phy: phy@0 {
41                                         compatible = "ethernet-phy-ieee802.3-c22";
42                                         reg = <0x0>;
43                                         interrupt-parent = <&gpio>;
44                                         interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
45                                         #phy-cells = <0>;
46                                 };
47                         };
48                 };
49
50                 memory-controller@2c00000 {
51                         status = "okay";
52                 };
53
54                 serial@3100000 {
55                         status = "okay";
56                 };
57
58                 i2c@3160000 {
59                         status = "okay";
60
61                         eeprom@50 {
62                                 compatible = "atmel,24c02";
63                                 reg = <0x50>;
64
65                                 label = "module";
66                                 vcc-supply = <&vdd_1v8ls>;
67                                 address-width = <8>;
68                                 pagesize = <8>;
69                                 size = <256>;
70                                 read-only;
71                         };
72                 };
73
74                 padctl@3520000 {
75                         avdd-usb-supply = <&vdd_usb_3v3>;
76                         vclamp-usb-supply = <&vdd_1v8ao>;
77
78                         ports {
79                                 usb2-1 {
80                                         vbus-supply = <&vdd_5v0_sys>;
81                                 };
82
83                                 usb2-3 {
84                                         vbus-supply = <&vdd_5v0_sys>;
85                                 };
86
87                                 usb3-0 {
88                                         vbus-supply = <&vdd_5v0_sys>;
89                                 };
90
91                                 usb3-3 {
92                                         vbus-supply = <&vdd_5v0_sys>;
93                                 };
94                         };
95                 };
96
97                 rtc@c2a0000 {
98                         status = "okay";
99                 };
100
101                 pmc@c360000 {
102                         nvidia,invert-interrupt;
103                 };
104         };
105
106         bpmp {
107                 i2c {
108                         status = "okay";
109
110                         pmic: pmic@3c {
111                                 compatible = "maxim,max20024";
112                                 reg = <0x3c>;
113
114                                 interrupt-parent = <&pmc>;
115                                 interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
116                                 #interrupt-cells = <2>;
117                                 interrupt-controller;
118
119                                 #gpio-cells = <2>;
120                                 gpio-controller;
121
122                                 pinctrl-names = "default";
123                                 pinctrl-0 = <&max20024_default>;
124
125                                 max20024_default: pinmux {
126                                         gpio0 {
127                                                 pins = "gpio0";
128                                                 function = "gpio";
129                                         };
130
131                                         gpio1 {
132                                                 pins = "gpio1";
133                                                 function = "fps-out";
134                                                 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
135                                         };
136
137                                         gpio2 {
138                                                 pins = "gpio2";
139                                                 function = "fps-out";
140                                                 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
141                                         };
142
143                                         gpio3 {
144                                                 pins = "gpio3";
145                                                 function = "fps-out";
146                                                 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
147                                         };
148
149                                         gpio4 {
150                                                 pins = "gpio4";
151                                                 function = "32k-out1";
152                                                 drive-push-pull = <1>;
153                                         };
154
155                                         gpio6 {
156                                                 pins = "gpio6";
157                                                 function = "gpio";
158                                                 drive-push-pull = <1>;
159                                         };
160
161                                         gpio7 {
162                                                 pins = "gpio7";
163                                                 function = "gpio";
164                                                 drive-push-pull = <0>;
165                                         };
166                                 };
167
168                                 fps {
169                                         fps0 {
170                                                 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
171                                                 maxim,shutdown-fps-time-period-us = <640>;
172                                         };
173
174                                         fps1 {
175                                                 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
176                                                 maxim,shutdown-fps-time-period-us = <640>;
177                                                 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
178                                         };
179
180                                         fps2 {
181                                                 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
182                                                 maxim,shutdown-fps-time-period-us = <640>;
183                                         };
184                                 };
185
186                                 regulators {
187                                         in-sd0-supply = <&vdd_5v0_sys>;
188                                         in-sd1-supply = <&vdd_5v0_sys>;
189                                         in-sd2-supply = <&vdd_5v0_sys>;
190                                         in-sd3-supply = <&vdd_5v0_sys>;
191                                         in-sd4-supply = <&vdd_5v0_sys>;
192
193                                         in-ldo0-1-supply = <&vdd_5v0_sys>;
194                                         in-ldo2-supply = <&vdd_5v0_sys>;
195                                         in-ldo3-5-supply = <&vdd_5v0_sys>;
196                                         in-ldo4-6-supply = <&vdd_5v0_sys>;
197                                         in-ldo7-8-supply = <&vdd_1v8ls>;
198
199                                         vdd_1v0: sd0 {
200                                                 regulator-name = "VDDIO_SYS_1V0";
201                                                 regulator-min-microvolt = <1000000>;
202                                                 regulator-max-microvolt = <1000000>;
203                                                 regulator-always-on;
204                                                 regulator-boot-on;
205                                         };
206
207                                         vdd_1v8hs: sd1 {
208                                                 regulator-name = "VDDIO_SYS_1V8HS";
209                                                 regulator-min-microvolt = <1800000>;
210                                                 regulator-max-microvolt = <1800000>;
211                                                 regulator-always-on;
212                                                 regulator-boot-on;
213                                         };
214
215                                         vdd_1v8ls: sd2 {
216                                                 regulator-name = "VDDIO_SYS_1V8LS";
217                                                 regulator-min-microvolt = <1800000>;
218                                                 regulator-max-microvolt = <1800000>;
219                                                 regulator-always-on;
220                                                 regulator-boot-on;
221                                         };
222
223                                         vdd_1v8ao: sd3 {
224                                                 regulator-name = "VDDIO_AO_1V8";
225                                                 regulator-min-microvolt = <1800000>;
226                                                 regulator-max-microvolt = <1800000>;
227                                                 regulator-always-on;
228                                                 regulator-boot-on;
229                                         };
230
231                                         sd4 {
232                                                 regulator-name = "VDD_DDR_1V1";
233                                                 regulator-min-microvolt = <1100000>;
234                                                 regulator-max-microvolt = <1100000>;
235                                                 regulator-always-on;
236                                                 regulator-boot-on;
237                                         };
238
239                                         ldo0 {
240                                                 regulator-name = "VDD_RTC";
241                                                 regulator-min-microvolt = <800000>;
242                                                 regulator-max-microvolt = <800000>;
243                                                 regulator-always-on;
244                                                 regulator-boot-on;
245                                         };
246
247                                         ldo2 {
248                                                 regulator-name = "VDDIO_AO_3V3";
249                                                 regulator-min-microvolt = <3300000>;
250                                                 regulator-max-microvolt = <3300000>;
251                                                 regulator-always-on;
252                                                 regulator-boot-on;
253                                         };
254
255                                         vdd_emmc_3v3: ldo3 {
256                                                 regulator-name = "VDD_EMMC_3V3";
257                                                 regulator-min-microvolt = <3300000>;
258                                                 regulator-max-microvolt = <3300000>;
259                                         };
260
261                                         vdd_usb_3v3: ldo5 {
262                                                 regulator-name = "VDD_USB_3V3";
263                                                 regulator-min-microvolt = <3300000>;
264                                                 regulator-max-microvolt = <3300000>;
265                                                 regulator-always-on;
266                                                 regulator-boot-on;
267                                         };
268
269                                         ldo6 {
270                                                 regulator-name = "VDD_SDIO_3V3";
271                                                 regulator-min-microvolt = <3300000>;
272                                                 regulator-max-microvolt = <3300000>;
273                                         };
274
275                                         ldo7 {
276                                                 regulator-name = "AVDD_CSI_1V2";
277                                                 regulator-min-microvolt = <1200000>;
278                                                 regulator-max-microvolt = <1200000>;
279                                         };
280                                 };
281                         };
282                 };
283         };
284 };