arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * dts file for Hisilicon HiKey960 Development Board
   4  *
   5  * Copyright (C) 2016, HiSilicon Ltd.
   6  *
   7  */
   8
   9 /dts-v1/;
  10
  11 #include "hi3660.dtsi"
  12 #include "hikey960-pinctrl.dtsi"
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/input/input.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/usb/pd.h>
  17
  18 / {
  19         model = "HiKey960";
  20         compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
  21
  22         aliases {
  23                 mshc1 = &dwmmc1;
  24                 mshc2 = &dwmmc2;
  25                 serial0 = &uart0;
  26                 serial1 = &uart1;
  27                 serial2 = &uart2;
  28                 serial3 = &uart3;
  29                 serial4 = &uart4;
  30                 serial5 = &uart5;
  31                 serial6 = &uart6;
  32         };
  33
  34         chosen {
  35                 stdout-path = "serial6:115200n8";
  36         };
  37
  38         memory@0 {
  39                 device_type = "memory";
  40                 /* rewrite this at bootloader */
  41                 reg = <0x0 0x0 0x0 0x0>;
  42         };
  43
  44         reserved-memory {
  45                 #address-cells = <2>;
  46                 #size-cells = <2>;
  47                 ranges;
  48
  49                 ramoops@32000000 {
  50                         compatible = "ramoops";
  51                         reg = <0x0 0x32000000 0x0 0x00100000>;
  52                         record-size     = <0x00020000>;
  53                         console-size    = <0x00020000>;
  54                         ftrace-size     = <0x00020000>;
  55                 };
  56         };
  57
  58         reboot-mode-syscon@32100000 {
  59                 compatible = "syscon", "simple-mfd";
  60                 reg = <0x0 0x32100000 0x0 0x00001000>;
  61
  62                 reboot-mode {
  63                         compatible = "syscon-reboot-mode";
  64                         offset = <0x0>;
  65
  66                         mode-normal     = <0x77665501>;
  67                         mode-bootloader = <0x77665500>;
  68                         mode-recovery   = <0x77665502>;
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74                 pinctrl-names = "default";
  75                 pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
  76
  77                 power {
  78                         wakeup-source;
  79                         gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
  80                         label = "GPIO Power";
  81                         linux,code = <KEY_POWER>;
  82                 };
  83         };
  84
  85         leds {
  86                 compatible = "gpio-leds";
  87
  88                 user_led1 {
  89                         label = "green:user1";
  90                         /* gpio_150_user_led1 */
  91                         gpios = <&gpio18 6 0>;
  92                         linux,default-trigger = "heartbeat";
  93                 };
  94
  95                 user_led2 {
  96                         label = "green:user2";
  97                         /* gpio_151_user_led2 */
  98                         gpios = <&gpio18 7 0>;
  99                         linux,default-trigger = "none";
 100                 };
 101
 102                 user_led3 {
 103                         label = "green:user3";
 104                         /* gpio_189_user_led3 */
 105                         gpios = <&gpio23 5 0>;
 106                         linux,default-trigger = "mmc0";
 107                 };
 108
 109                 user_led4 {
 110                         label = "green:user4";
 111                         /* gpio_190_user_led4 */
 112                         gpios = <&gpio23 6 0>;
 113                         panic-indicator;
 114                         linux,default-trigger = "none";
 115                 };
 116
 117                 wlan_active_led {
 118                         label = "yellow:wlan";
 119                         /* gpio_205_wifi_active */
 120                         gpios = <&gpio25 5 0>;
 121                         linux,default-trigger = "phy0tx";
 122                         default-state = "off";
 123                 };
 124
 125                 bt_active_led {
 126                         label = "blue:bt";
 127                         gpios = <&gpio25 7 0>;
 128                         /* gpio_207_user_led1 */
 129                         linux,default-trigger = "hci0-power";
 130                         default-state = "off";
 131                 };
 132         };
 133
 134         pmic: pmic@fff34000 {
 135                 compatible = "hisilicon,hi6421v530-pmic";
 136                 reg = <0x0 0xfff34000 0x0 0x1000>;
 137                 interrupt-controller;
 138                 #interrupt-cells = <2>;
 139
 140                 regulators {
 141                         ldo3: LDO3 { /* HDMI */
 142                                 regulator-name = "VOUT3_1V85";
 143                                 regulator-min-microvolt = <1800000>;
 144                                 regulator-max-microvolt = <2200000>;
 145                                 regulator-enable-ramp-delay = <120>;
 146                         };
 147
 148                         ldo9: LDO9 { /* SDCARD I/O */
 149                                 regulator-name = "VOUT9_1V8_2V95";
 150                                 regulator-min-microvolt = <1750000>;
 151                                 regulator-max-microvolt = <3300000>;
 152                                 regulator-enable-ramp-delay = <240>;
 153                         };
 154
 155                         ldo11: LDO11 { /* Low Speed Connector */
 156                                 regulator-name = "VOUT11_1V8_2V95";
 157                                 regulator-min-microvolt = <1750000>;
 158                                 regulator-max-microvolt = <3300000>;
 159                                 regulator-enable-ramp-delay = <240>;
 160                         };
 161
 162                         ldo15: LDO15 { /* UFS VCC */
 163                                 regulator-name = "VOUT15_3V0";
 164                                 regulator-min-microvolt = <1750000>;
 165                                 regulator-max-microvolt = <3000000>;
 166                                 regulator-boot-on;
 167                                 regulator-always-on;
 168                                 regulator-enable-ramp-delay = <120>;
 169                         };
 170
 171                         ldo16: LDO16 { /* SD VDD */
 172                                 regulator-name = "VOUT16_2V95";
 173                                 regulator-min-microvolt = <1750000>;
 174                                 regulator-max-microvolt = <3000000>;
 175                                 regulator-enable-ramp-delay = <360>;
 176                         };
 177                 };
 178         };
 179
 180         wlan_en: wlan-en-1-8v {
 181                 compatible = "regulator-fixed";
 182                 regulator-name = "wlan-en-regulator";
 183                 regulator-min-microvolt = <1800000>;
 184                 regulator-max-microvolt = <1800000>;
 185
 186                 /* GPIO_051_WIFI_EN */
 187                 gpio = <&gpio6 3 0>;
 188
 189                 /* WLAN card specific delay */
 190                 startup-delay-us = <70000>;
 191                 enable-active-high;
 192         };
 193
 194         firmware {
 195                 optee {
 196                         compatible = "linaro,optee-tz";
 197                         method = "smc";
 198                 };
 199         };
 200 };
 201
 202 /*
 203  * Legend: proper name = the GPIO line is used as GPIO
 204  *         NC = not connected (pin out but not routed from the chip to
 205  *              anything the board)
 206  *         "[PER]" = pin is muxed for [peripheral] (not GPIO)
 207  *         "" = no idea, schematic doesn't say, could be
 208  *              unrouted (not connected to any external pin)
 209  *         LSEC = Low Speed External Connector
 210  *         HSEC = High Speed External Connector
 211  *
 212  * Line names are taken from "HiKey 960 Board ver A" schematics
 213  * from Huawei. The 40 pin low speed expansion connector is named
 214  * J2002 63453-140LF.
 215  *
 216  * For the lines routed to the external connectors the
 217  * lines are named after the 96Boards CE Specification 1.0,
 218  * Appendix "Expansion Connector Signal Description".
 219  *
 220  * When the 96Board naming of a line and the schematic name of
 221  * the same line are in conflict, the 96Board specification
 222  * takes precedence, which means that the external UART on the
 223  * LSEC is named UART0 while the schematic and SoC names this
 224  * UART3. This is only for the informational lines i.e. "[FOO]",
 225  * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
 226  * ones actually used for GPIO.
 227  */
 228 &gpio0 {
 229         /* GPIO_000-GPIO_007 */
 230         gpio-line-names =
 231                 "",
 232                 "TP901", /* TEST_MODE connected to TP901 */
 233                 "[PMU0_SSI]",
 234                 "[PMU1_SSI]",
 235                 "[PMU2_SSI]",
 236                 "[PMU0_CLKOUT]",
 237                 "[JTAG_TCK]",
 238                 "[JTAG_TMS]";
 239 };
 240
 241 &gpio1 {
 242         /* GPIO_008-GPIO_015 */
 243         gpio-line-names =
 244                 "[JTAG_TRST_N]",
 245                 "[JTAG_TDI]",
 246                 "[JTAG_TDO]",
 247                 "NC", "NC",
 248                 "[I2C3_SCL]",
 249                 "[I2C3_SDA]",
 250                 "NC";
 251 };
 252
 253 &gpio2 {
 254         /* GPIO_016-GPIO_023 */
 255         gpio-line-names =
 256                 "NC", "NC", "NC",
 257                 "GPIO-J", /* LSEC pin 32: GPIO_019 */
 258                 "GPIO_020_HDMI_SEL",
 259                 "GPIO-L", /* LSEC pin 34: GPIO_021 */
 260                 "GPIO_022_UFSBUCK_INT_N",
 261                 "GPIO-G"; /* LSEC pin 29: LCD_TE0 */
 262 };
 263
 264 &gpio3 {
 265         /* GPIO_024-GPIO_031 */
 266         /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
 267         gpio-line-names =
 268                 "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
 269                 "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
 270                 "NC",
 271                 "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
 272                 "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
 273                 "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
 274                 "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
 275                 "NC";
 276 };
 277
 278 &gpio4 {
 279         /* GPIO_032-GPIO_039 */
 280         gpio-line-names =
 281                 "NC", "NC",
 282                 "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
 283                 "GPIO_035_PMU2_EN",
 284                 "GPIO_036_USB_HUB_RESET",
 285                 "NC", "NC", "NC";
 286 };
 287
 288 &gpio5 {
 289         /* GPIO_040-GPIO_047 */
 290         gpio-line-names =
 291                 "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
 292                 "GPIO_041_HDMI_PD",
 293                 "TP904", /* Test point */
 294                 "TP905", /* Test point */
 295                 "NC", "NC",
 296                 "GPIO_046_HUB_VDD33_EN",
 297                 "GPIO_047_PMU1_EN";
 298 };
 299
 300 &gpio6 {
 301         /* GPIO_048-GPIO_055 */
 302         gpio-line-names =
 303                 "NC", "NC", "NC",
 304                 "GPIO_051_WIFI_EN",
 305                 "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
 306                 /*
 307                  * These two pins should be used for SD(IO) data according to the
 308                  * 96boards specification but seems to be repurposed for a IRDA UART.
 309                  * They are however named according to the spec.
 310                  */
 311                 "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
 312                 "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
 313                 "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
 314 };
 315
 316 &gpio7 {
 317         /* GPIO_056-GPIO_063 */
 318         gpio-line-names =
 319                 "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
 320                 "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
 321                 "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
 322                 "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
 323                 "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
 324                 "[SOC_BT_UART4_CTS_N]",
 325                 "[SOC_BT_UART4_RTS_N]",
 326                 "[SOC_BT_UART4_RXD]";
 327 };
 328
 329 &gpio8 {
 330         /* GPIO_064-GPIO_071 */
 331         gpio-line-names =
 332                 "[SOC_BT_UART4_TXD]",
 333                 "NC",
 334                 "[PMU_HKADC_SSI]",
 335                 "NC",
 336                 "GPIO_068_SEL",
 337                 "NC", "NC", "NC";
 338
 339 };
 340
 341 &gpio9 {
 342         /* GPIO_072-GPIO_079 */
 343         gpio-line-names =
 344                 "NC", "NC", "NC",
 345                 "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
 346                 "NC", "NC", "NC", "NC";
 347 };
 348
 349 &gpio10 {
 350         /* GPIO_080-GPIO_087 */
 351         gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
 352 };
 353
 354 &gpio11 {
 355         /* GPIO_088-GPIO_095 */
 356         gpio-line-names =
 357                 "NC",
 358                 "[PCIE_PERST_N]",
 359                 "NC", "NC", "NC", "NC", "NC", "NC";
 360 };
 361
 362 &gpio12 {
 363         /* GPIO_096-GPIO_103 */
 364         gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
 365 };
 366
 367 &gpio13 {
 368         /* GPIO_104-GPIO_111 */
 369         gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
 370 };
 371
 372 &gpio14 {
 373         /* GPIO_112-GPIO_119 */
 374         gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
 375 };
 376
 377 &gpio15 {
 378         /* GPIO_120-GPIO_127 */
 379         gpio-line-names =
 380                 "NC", "NC", "NC", "NC", "NC", "NC",
 381                 "GPIO_126_BT_EN",
 382                 "TP902"; /* GPIO_127_JTAG_SEL0 */
 383 };
 384
 385 &gpio16 {
 386         /* GPIO_128-GPIO_135 */
 387         gpio-line-names = "", "", "", "", "", "", "", "";
 388 };
 389
 390 &gpio17 {
 391         /* GPIO_136-GPIO_143 */
 392         gpio-line-names = "", "", "", "", "", "", "", "";
 393 };
 394
 395 &gpio18 {
 396         /* GPIO_144-GPIO_151 */
 397         gpio-line-names =
 398                 "[UFS_REF_CLK]",
 399                 "[UFS_RST_N]",
 400                 "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
 401                 "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
 402                 "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
 403                 "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
 404                 "GPIO_150_USER_LED1",
 405                 "GPIO_151_USER_LED2";
 406 };
 407
 408 &gpio19 {
 409         /* GPIO_152-GPIO_159 */
 410         gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
 411 };
 412
 413 &gpio20 {
 414         /* GPIO_160-GPIO_167 */
 415         gpio-line-names =
 416                 "[SD_CLK]",
 417                 "[SD_CMD]",
 418                 "[SD_DATA0]",
 419                 "[SD_DATA1]",
 420                 "[SD_DATA2]",
 421                 "[SD_DATA3]",
 422                 "", "";
 423 };
 424
 425 &gpio21 {
 426         /* GPIO_168-GPIO_175 */
 427         gpio-line-names =
 428                 "[WL_SDIO_CLK]",
 429                 "[WL_SDIO_CMD]",
 430                 "[WL_SDIO_DATA0]",
 431                 "[WL_SDIO_DATA1]",
 432                 "[WL_SDIO_DATA2]",
 433                 "[WL_SDIO_DATA3]",
 434                 "", "";
 435 };
 436
 437 &gpio22 {
 438         /* GPIO_176-GPIO_183 */
 439         gpio-line-names =
 440                 "[GPIO_176_PMU_PWR_HOLD]",
 441                 "NA",
 442                 "[SYSCLK_EN]",
 443                 "GPIO_179_WL_WAKEUP_AP",
 444                 "GPIO_180_HDMI_INT",
 445                 "NA",
 446                 "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
 447                 "[I2C0_SCL]"; /* LSEC pin 15 */
 448 };
 449
 450 &gpio23 {
 451         /* GPIO_184-GPIO_191 */
 452         gpio-line-names =
 453                 "[I2C0_SDA]", /* LSEC pin 17 */
 454                 "[I2C1_SCL]", /* Actual SoC I2C1 */
 455                 "[I2C1_SDA]", /* Actual SoC I2C1 */
 456                 "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
 457                 "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
 458                 "GPIO_189_USER_LED3",
 459                 "GPIO_190_USER_LED4",
 460                 "";
 461 };
 462
 463 &gpio24 {
 464         /* GPIO_192-GPIO_199 */
 465         gpio-line-names =
 466                 "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
 467                 "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
 468                 "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
 469                 "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
 470                 "[GPIO_196_I2S2_DI]",
 471                 "[GPIO_197_I2S2_DO]",
 472                 "[GPIO_198_I2S2_XCLK]",
 473                 "[GPIO_199_I2S2_XFS]";
 474 };
 475
 476 &gpio25 {
 477         /* GPIO_200-GPIO_207 */
 478         gpio-line-names =
 479                 "NC",
 480                 "NC",
 481                 "GPIO_202_VBUS_TYPEC",
 482                 "GPIO_203_SD_DET",
 483                 "GPIO_204_PMU12_IRQ_N",
 484                 "GPIO_205_WIFI_ACTIVE",
 485                 "GPIO_206_USBSW_SEL",
 486                 "GPIO_207_BT_ACTIVE";
 487 };
 488
 489 &gpio26 {
 490         /* GPIO_208-GPIO_215 */
 491         gpio-line-names =
 492                 "GPIO-A", /* LSEC pin 23: GPIO_208 */
 493                 "GPIO-B", /* LSEC pin 24: GPIO_209 */
 494                 "GPIO-C", /* LSEC pin 25: GPIO_210 */
 495                 "GPIO-D", /* LSEC pin 26: GPIO_211 */
 496                 "GPIO-E", /* LSEC pin 27: GPIO_212 */
 497                 "[PCIE_CLKREQ_N]",
 498                 "[PCIE_WAKE_N]",
 499                 "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
 500 };
 501
 502 &gpio27 {
 503         /* GPIO_216-GPIO_223 */
 504         gpio-line-names =
 505                 "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
 506                 "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
 507                 "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
 508                 "GPIO_219_CC_INT",
 509                 "NC",
 510                 "NC",
 511                 "[PMU_INT]",
 512                 "";
 513 };
 514
 515 &gpio28 {
 516         /* GPIO_224-GPIO_231 */
 517         gpio-line-names =
 518                 "", "", "", "", "", "", "", "";
 519 };
 520
 521 &i2c0 {
 522         /* On Low speed expansion */
 523         label = "LS-I2C0";
 524         status = "okay";
 525 };
 526
 527 &i2c1 {
 528         status = "okay";
 529
 530         rt1711h: rt1711h@4e {
 531                 compatible = "richtek,rt1711h";
 532                 reg = <0x4e>;
 533                 status = "okay";
 534                 interrupt-parent = <&gpio27>;
 535                 interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
 536                 pinctrl-names = "default";
 537                 pinctrl-0 = <&usb_cfg_func>;
 538
 539                 usb_con: connector {
 540                         compatible = "usb-c-connector";
 541                         label = "USB-C";
 542                         data-role = "dual";
 543                         power-role = "dual";
 544                         try-power-role = "sink";
 545                         source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
 546                         sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
 547                                 PDO_VAR(5000, 5000, 1000)>;
 548                         op-sink-microwatt = <10000000>;
 549
 550                         ports {
 551                                 #address-cells = <1>;
 552                                 #size-cells = <0>;
 553                                 port@1 {
 554                                         reg = <1>;
 555                                         usb_con_ss: endpoint {
 556                                                 remote-endpoint = <&dwc3_ss>;
 557                                         };
 558                                 };
 559                         };
 560                 };
 561                 port {
 562                         #address-cells = <1>;
 563                         #size-cells = <0>;
 564
 565                         rt1711h_ep: endpoint@0 {
 566                                 reg = <0>;
 567                                 remote-endpoint = <&dwc3_role_switch>;
 568                         };
 569                 };
 570         };
 571
 572         adv7533: adv7533@39 {
 573                 status = "okay";
 574                 compatible = "adi,adv7533";
 575                 reg = <0x39>;
 576                 adi,dsi-lanes = <4>;
 577                 ports {
 578                         #address-cells = <1>;
 579                         #size-cells = <0>;
 580                         port@0 {
 581                                 reg = <0>;
 582                         };
 583                         port@1 {
 584                                 reg = <1>;
 585                         };
 586                 };
 587         };
 588 };
 589
 590 &i2c7 {
 591         /* On Low speed expansion */
 592         label = "LS-I2C1";
 593         status = "okay";
 594 };
 595
 596 &uart3 {
 597         /* On Low speed expansion */
 598         label = "LS-UART0";
 599         status = "okay";
 600 };
 601
 602 &uart4 {
 603         status = "okay";
 604
 605         bluetooth {
 606                 compatible = "ti,wl1837-st";
 607                 enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
 608                 max-speed = <3000000>;
 609         };
 610 };
 611
 612 &uart6 {
 613         /* On Low speed expansion */
 614         label = "LS-UART1";
 615         status = "okay";
 616 };
 617
 618 &spi2 {
 619         /* On Low speed expansion */
 620         label = "LS-SPI0";
 621         status = "okay";
 622 };
 623
 624 &spi3 {
 625         /* On High speed expansion */
 626         label = "HS-SPI1";
 627         status = "okay";
 628 };
 629
 630 &dwmmc1 {
 631         bus-width = <0x4>;
 632         cap-sd-highspeed;
 633         sd-uhs-sdr12;
 634         sd-uhs-sdr25;
 635         sd-uhs-sdr50;
 636         sd-uhs-sdr104;
 637         disable-wp;
 638         cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
 639         pinctrl-names = "default";
 640         pinctrl-0 = <&sd_pmx_func
 641                      &sd_clk_cfg_func
 642                      &sd_cfg_func>;
 643         vmmc-supply = <&ldo16>;
 644         vqmmc-supply = <&ldo9>;
 645         status = "okay";
 646 };
 647
 648 &dwmmc2 { /* WIFI */
 649         bus-width = <0x4>;
 650         non-removable;
 651         broken-cd;
 652         cap-power-off-card;
 653         pinctrl-names = "default";
 654         pinctrl-0 = <&sdio_pmx_func
 655                      &sdio_clk_cfg_func
 656                      &sdio_cfg_func>;
 657         /* WL_EN */
 658         vmmc-supply = <&wlan_en>;
 659         status = "okay";
 660
 661         wlcore: wlcore@2 {
 662                 compatible = "ti,wl1837";
 663                 reg = <2>;      /* sdio func num */
 664                 /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
 665                 interrupt-parent = <&gpio22>;
 666                 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 667         };
 668 };
 669
 670 &dwc3 { /* USB */
 671         dr_mode = "otg";
 672         maximum-speed = "super-speed";
 673         phy_type = "utmi";
 674         snps,dis-del-phy-power-chg-quirk;
 675         snps,lfps_filter_quirk;
 676         snps,dis_u2_susphy_quirk;
 677         snps,dis_u3_susphy_quirk;
 678         snps,tx_de_emphasis_quirk;
 679         snps,tx_de_emphasis = <1>;
 680         snps,dis_enblslpm_quirk;
 681         snps,gctl-reset-quirk;
 682         usb-role-switch;
 683         role-switch-default-mode = "host";
 684         port {
 685                 #address-cells = <1>;
 686                 #size-cells = <0>;
 687                 dwc3_role_switch: endpoint@0 {
 688                         reg = <0>;
 689                         remote-endpoint = <&rt1711h_ep>;
 690                 };
 691
 692                 dwc3_ss: endpoint@1 {
 693                         reg = <1>;
 694                         remote-endpoint = <&usb_con_ss>;
 695                 };
 696         };
 697 };