arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
   2 /*
   3  * Copyright 2019-2021 TQ-Systems GmbH
   4  */
   5
   6 #include "imx8mq.dtsi"
   7
   8 / {
   9         model = "TQ-Systems GmbH i.MX8MQ TQMa8MQ";
  10         compatible = "tq,imx8mq-tqma8mq", "fsl,imx8mq";
  11
  12         memory@40000000 {
  13                 device_type = "memory";
  14                 /*  our minimum RAM config will be 1024 MiB */
  15                 reg = <0x00000000 0x40000000 0 0x40000000>;
  16         };
  17
  18         /* e-MMC IO, needed for HS modes */
  19         reg_vcc1v8: regulator-vcc1v8 {
  20                 compatible = "regulator-fixed";
  21                 regulator-name = "TQMA8MX_VCC1V8";
  22                 regulator-min-microvolt = <1800000>;
  23                 regulator-max-microvolt = <1800000>;
  24         };
  25
  26         reg_vcc3v3: regulator-vcc3v3 {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "TQMA8MX_VCC3V3";
  29                 regulator-min-microvolt = <3300000>;
  30                 regulator-max-microvolt = <3300000>;
  31         };
  32
  33         reg_vdd_arm: regulator-vdd-arm {
  34                 compatible = "regulator-gpio";
  35                 pinctrl-names = "default";
  36                 pinctrl-0 = <&pinctrl_dvfs>;
  37                 regulator-min-microvolt = <900000>;
  38                 regulator-max-microvolt = <1000000>;
  39                 regulator-name = "TQMa8Mx_DVFS";
  40                 regulator-type = "voltage";
  41                 regulator-settling-time-us = <150000>;
  42                 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  43                 states = <900000 0x1 1000000 0x0>;
  44         };
  45
  46         reserved-memory {
  47                 #address-cells = <2>;
  48                 #size-cells = <2>;
  49                 ranges;
  50
  51                 /* global autoconfigured region for contiguous allocations */
  52                 linux,cma {
  53                         compatible = "shared-dma-pool";
  54                         reusable;
  55                         /* 640 MiB */
  56                         size = <0 0x28000000>;
  57                         /*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */
  58                         alloc-ranges = <0 0x40000000 0 0x78000000>;
  59                         linux,cma-default;
  60                 };
  61         };
  62 };
  63
  64 &A53_0 {
  65         cpu-supply = <&reg_vdd_arm>;
  66 };
  67
  68 &A53_1 {
  69         cpu-supply = <&reg_vdd_arm>;
  70 };
  71
  72 &A53_2 {
  73         cpu-supply = <&reg_vdd_arm>;
  74 };
  75
  76 &A53_3 {
  77         cpu-supply = <&reg_vdd_arm>;
  78 };
  79
  80 &gpu {
  81         status = "okay";
  82 };
  83
  84 &pgc_gpu {
  85         power-supply = <&sw1a_reg>;
  86 };
  87
  88 &pgc_vpu {
  89         power-supply = <&sw1c_reg>;
  90 };
  91
  92 &i2c1 {
  93         clock-frequency = <100000>;
  94         pinctrl-names = "default", "gpio";
  95         pinctrl-0 = <&pinctrl_i2c1>;
  96         pinctrl-1 = <&pinctrl_i2c1_gpio>;
  97         scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  98         sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  99         status = "okay";
 100
 101         pfuze100: pmic@8 {
 102                 compatible = "fsl,pfuze100";
 103                 fsl,pfuze-support-disable-sw;
 104                 reg = <0x8>;
 105
 106                 regulators {
 107                         /* VDD_GPU */
 108                         sw1a_reg: sw1ab {
 109                                 regulator-min-microvolt = <825000>;
 110                                 regulator-max-microvolt = <1100000>;
 111                         };
 112
 113                         /* VDD_VPU */
 114                         sw1c_reg: sw1c {
 115                                 regulator-min-microvolt = <825000>;
 116                                 regulator-max-microvolt = <1100000>;
 117                         };
 118
 119                         /* NVCC_DRAM */
 120                         sw2_reg: sw2 {
 121                                 regulator-min-microvolt = <1100000>;
 122                                 regulator-max-microvolt = <1100000>;
 123                                 regulator-always-on;
 124                         };
 125
 126                         /* VDD_DRAM */
 127                         sw3a_reg: sw3ab {
 128                                 regulator-min-microvolt = <825000>;
 129                                 regulator-max-microvolt = <1100000>;
 130                                 regulator-always-on;
 131                         };
 132
 133                         /* 1.8 V for QSPI NOR, e-MMC IO, must not be changed */
 134                         nvcc_1v8_reg: sw4 {
 135                                 regulator-min-microvolt = <1800000>;
 136                                 regulator-max-microvolt = <1800000>;
 137                                 regulator-always-on;
 138                         };
 139
 140                         swbst_reg: swbst {
 141                                 regulator-min-microvolt = <5000000>;
 142                                 regulator-max-microvolt = <5150000>;
 143                         };
 144
 145                         snvs_reg: vsnvs {
 146                                 regulator-min-microvolt = <1000000>;
 147                                 regulator-max-microvolt = <3000000>;
 148                                 regulator-always-on;
 149                         };
 150
 151                         vref_reg: vrefddr {
 152                                 regulator-always-on;
 153                         };
 154
 155                         /* not used */
 156                         vgen1_reg: vgen1 {
 157                                 regulator-min-microvolt = <800000>;
 158                                 regulator-max-microvolt = <1550000>;
 159                         };
 160
 161                         /* VDD_PHY_0V9 */
 162                         vgen2_reg: vgen2 {
 163                                 regulator-min-microvolt = <850000>;
 164                                 regulator-max-microvolt = <975000>;
 165                                 regulator-always-on;
 166                         };
 167
 168                         /* VDD_PHY_1V8 */
 169                         vgen3_reg: vgen3 {
 170                                 regulator-min-microvolt = <1675000>;
 171                                 regulator-max-microvolt = <1975000>;
 172                                 regulator-always-on;
 173                         };
 174
 175                         /* VDDA_1V8 */
 176                         vgen4_reg: vgen4 {
 177                                 regulator-min-microvolt = <1625000>;
 178                                 regulator-max-microvolt = <1875000>;
 179                                 regulator-always-on;
 180                         };
 181
 182                         /* VDD_PHY_3V3 */
 183                         vgen5_reg: vgen5 {
 184                                 regulator-min-microvolt = <3075000>;
 185                                 regulator-max-microvolt = <3625000>;
 186                                 regulator-always-on;
 187                         };
 188
 189                         /* not used */
 190                         vgen6_reg: vgen6 {
 191                                 regulator-min-microvolt = <1800000>;
 192                                 regulator-max-microvolt = <3300000>;
 193                         };
 194                 };
 195         };
 196
 197         sensor0: temperature-sensor-eeprom@1b {
 198                 compatible = "nxp,se97", "jedec,jc-42.4-temp";
 199                 reg = <0x1b>;
 200         };
 201
 202         pcf85063: rtc@51 {
 203                 compatible = "nxp,pcf85063a";
 204                 reg = <0x51>;
 205                 pinctrl-names = "default";
 206                 pinctrl-0 = <&pinctrl_rtc>;
 207                 interrupt-names = "irq";
 208                 interrupt-parent = <&gpio1>;
 209                 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 210                 quartz-load-femtofarads = <7000>;
 211
 212                 clock {
 213                         compatible = "fixed-clock";
 214                         #clock-cells = <0>;
 215                         clock-frequency = <32768>;
 216                 };
 217         };
 218
 219         eeprom1: eeprom@53 {
 220                 compatible = "nxp,se97b", "atmel,24c02";
 221                 reg = <0x53>;
 222                 pagesize = <16>;
 223                 read-only;
 224         };
 225
 226         eeprom0: eeprom@57 {
 227                 compatible = "atmel,24c64";
 228                 reg = <0x57>;
 229                 pagesize = <32>;
 230         };
 231 };
 232
 233 &pcie0 {
 234         /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
 235         vph-supply = <&vgen5_reg>;
 236 };
 237
 238 &pcie1 {
 239         /* 3.3V supply, only way to switch on internal 1.8V supply using GPR */
 240         vph-supply = <&vgen5_reg>;
 241 };
 242
 243 &qspi0 {
 244         pinctrl-names = "default";
 245         pinctrl-0 = <&pinctrl_qspi>;
 246         assigned-clocks = <&clk IMX8MQ_CLK_QSPI>;
 247         assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>;
 248         status = "okay";
 249
 250         flash0: flash@0 {
 251                 compatible = "jedec,spi-nor";
 252                 reg = <0>;
 253                 #address-cells = <1>;
 254                 #size-cells = <1>;
 255                 spi-max-frequency = <84000000>;
 256                 spi-tx-bus-width = <4>;
 257                 spi-rx-bus-width = <4>;
 258         };
 259 };
 260
 261 &usdhc1 {
 262         pinctrl-names = "default", "state_100mhz", "state_200mhz";
 263         pinctrl-0 = <&pinctrl_usdhc1>;
 264         pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 265         pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 266         bus-width = <8>;
 267         non-removable;
 268         no-sd;
 269         no-sdio;
 270         vmmc-supply = <&reg_vcc3v3>;
 271         vqmmc-supply = <&reg_vcc1v8>;
 272         status = "okay";
 273 };
 274
 275 /* Attention: wdog reset forcing POR needs baseboard support */
 276 &wdog1 {
 277         status = "okay";
 278 };
 279
 280 &iomuxc {
 281         pinctrl_dvfs: dvfsgrp {
 282                 fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6   0x16>;
 283         };
 284
 285         pinctrl_i2c1: i2c1grp {
 286                 fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL              0x4000007f>,
 287                            <MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA              0x4000007f>;
 288         };
 289
 290         pinctrl_i2c1_gpio: i2c1gpiogrp {
 291                 fsl,pins = <MX8MQ_IOMUXC_I2C1_SCL_GPIO5_IO14            0x40000074>,
 292                            <MX8MQ_IOMUXC_I2C1_SDA_GPIO5_IO15            0x40000074>;
 293         };
 294
 295         pinctrl_qspi: qspigrp {
 296                 fsl,pins = <MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK           0x97>,
 297                            <MX8MQ_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B        0x82>,
 298                            <MX8MQ_IOMUXC_NAND_DATA00_QSPI_A_DATA0       0x97>,
 299                            <MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1       0x97>,
 300                            <MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2       0x97>,
 301                            <MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3       0x97>;
 302         };
 303
 304         pinctrl_rtc: rtcgrp {
 305                 fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO01_GPIO1_IO1           0x41>;
 306         };
 307
 308         pinctrl_usdhc1: usdhc1grp {
 309                 fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK             0x83>,
 310                            <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD             0xc3>,
 311                            <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0         0xc3>,
 312                            <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1         0xc3>,
 313                            <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2         0xc3>,
 314                            <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3         0xc3>,
 315                            <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4         0xc3>,
 316                            <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5         0xc3>,
 317                            <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6         0xc3>,
 318                            <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7         0xc3>,
 319                            <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE       0x83>,
 320                            <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B     0xc1>;
 321         };
 322
 323         pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 324                 fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK             0x85>,
 325                            <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD             0xc5>,
 326                            <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0         0xc5>,
 327                            <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1         0xc5>,
 328                            <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2         0xc5>,
 329                            <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3         0xc5>,
 330                            <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4         0xc5>,
 331                            <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5         0xc5>,
 332                            <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6         0xc5>,
 333                            <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7         0xc5>,
 334                            <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE       0x85>,
 335                            <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B     0xc1>;
 336         };
 337
 338         pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
 339                 fsl,pins = <MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK             0x87>,
 340                            <MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD             0xc7>,
 341                            <MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0         0xc7>,
 342                            <MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1         0xc7>,
 343                            <MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2         0xc7>,
 344                            <MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3         0xc7>,
 345                            <MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4         0xc7>,
 346                            <MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5         0xc7>,
 347                            <MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6         0xc7>,
 348                            <MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7         0xc7>,
 349                            <MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE       0x87>,
 350                            <MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B     0xc1>;
 351         };
 352
 353         pinctrl_wdog: wdoggrp {
 354                 fsl,pins = <MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B        0xc6>;
 355         };
 356 };