arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts

   1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
   2 //
   3 // Device Tree file for LX2160ARDB
   4 //
   5 // Copyright 2018-2020 NXP
   6
   7 /dts-v1/;
   8
   9 #include "fsl-lx2160a.dtsi"
  10
  11 / {
  12         model = "NXP Layerscape LX2160ARDB";
  13         compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
  14
  15         aliases {
  16                 crypto = &crypto;
  17                 mmc0 = &esdhc0;
  18                 mmc1 = &esdhc1;
  19                 serial0 = &uart0;
  20         };
  21
  22         chosen {
  23                 stdout-path = "serial0:115200n8";
  24         };
  25
  26         sb_3v3: regulator-sb3v3 {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "MC34717-3.3VSB";
  29                 regulator-min-microvolt = <3300000>;
  30                 regulator-max-microvolt = <3300000>;
  31                 regulator-boot-on;
  32                 regulator-always-on;
  33         };
  34 };
  35
  36 &crypto {
  37         status = "okay";
  38 };
  39
  40 &dpmac3 {
  41         phy-handle = <&aquantia_phy1>;
  42         phy-connection-type = "usxgmii";
  43         managed = "in-band-status";
  44 };
  45
  46 &dpmac4 {
  47         phy-handle = <&aquantia_phy2>;
  48         phy-connection-type = "usxgmii";
  49         managed = "in-band-status";
  50 };
  51
  52 &dpmac17 {
  53         phy-handle = <&rgmii_phy1>;
  54         phy-connection-type = "rgmii-id";
  55 };
  56
  57 &dpmac18 {
  58         phy-handle = <&rgmii_phy2>;
  59         phy-connection-type = "rgmii-id";
  60 };
  61
  62 &emdio1 {
  63         status = "okay";
  64
  65         rgmii_phy1: ethernet-phy@1 {
  66                 /* AR8035 PHY */
  67                 compatible = "ethernet-phy-id004d.d072";
  68                 reg = <0x1>;
  69                 eee-broken-1000t;
  70         };
  71
  72         rgmii_phy2: ethernet-phy@2 {
  73                 /* AR8035 PHY */
  74                 compatible = "ethernet-phy-id004d.d072";
  75                 reg = <0x2>;
  76                 eee-broken-1000t;
  77         };
  78
  79         aquantia_phy1: ethernet-phy@4 {
  80                 /* AQR107 PHY */
  81                 compatible = "ethernet-phy-ieee802.3-c45";
  82                 reg = <0x4>;
  83         };
  84
  85         aquantia_phy2: ethernet-phy@5 {
  86                 /* AQR107 PHY */
  87                 compatible = "ethernet-phy-ieee802.3-c45";
  88                 reg = <0x5>;
  89         };
  90 };
  91
  92 &can0 {
  93         status = "okay";
  94
  95         can-transceiver {
  96                 max-bitrate = <5000000>;
  97         };
  98 };
  99
 100 &can1 {
 101         status = "okay";
 102
 103         can-transceiver {
 104                 max-bitrate = <5000000>;
 105         };
 106 };
 107
 108 &esdhc0 {
 109         sd-uhs-sdr104;
 110         sd-uhs-sdr50;
 111         sd-uhs-sdr25;
 112         sd-uhs-sdr12;
 113         status = "okay";
 114 };
 115
 116 &esdhc1 {
 117         mmc-hs200-1_8v;
 118         mmc-hs400-1_8v;
 119         bus-width = <8>;
 120         status = "okay";
 121 };
 122
 123 &fspi {
 124         status = "okay";
 125
 126         mt35xu512aba0: flash@0 {
 127                 #address-cells = <1>;
 128                 #size-cells = <1>;
 129                 compatible = "jedec,spi-nor";
 130                 m25p,fast-read;
 131                 spi-max-frequency = <50000000>;
 132                 reg = <0>;
 133                 spi-rx-bus-width = <8>;
 134                 spi-tx-bus-width = <8>;
 135         };
 136
 137         mt35xu512aba1: flash@1 {
 138                 #address-cells = <1>;
 139                 #size-cells = <1>;
 140                 compatible = "jedec,spi-nor";
 141                 m25p,fast-read;
 142                 spi-max-frequency = <50000000>;
 143                 reg = <1>;
 144                 spi-rx-bus-width = <8>;
 145                 spi-tx-bus-width = <8>;
 146         };
 147 };
 148
 149 &i2c0 {
 150         status = "okay";
 151
 152         i2c-mux@77 {
 153                 compatible = "nxp,pca9547";
 154                 reg = <0x77>;
 155                 #address-cells = <1>;
 156                 #size-cells = <0>;
 157
 158                 i2c@2 {
 159                         #address-cells = <1>;
 160                         #size-cells = <0>;
 161                         reg = <0x2>;
 162
 163                         power-monitor@40 {
 164                                 compatible = "ti,ina220";
 165                                 reg = <0x40>;
 166                                 shunt-resistor = <500>;
 167                         };
 168                 };
 169
 170                 i2c@3 {
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173                         reg = <0x3>;
 174
 175                         temperature-sensor@4c {
 176                                 compatible = "nxp,sa56004";
 177                                 reg = <0x4c>;
 178                                 vcc-supply = <&sb_3v3>;
 179                         };
 180
 181                         temperature-sensor@4d {
 182                                 compatible = "nxp,sa56004";
 183                                 reg = <0x4d>;
 184                                 vcc-supply = <&sb_3v3>;
 185                         };
 186                 };
 187         };
 188 };
 189
 190 &i2c4 {
 191         status = "okay";
 192
 193         rtc@51 {
 194                 compatible = "nxp,pcf2129";
 195                 reg = <0x51>;
 196                 /* IRQ_RTC_B -> IRQ08, active low */
 197                 interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;
 198         };
 199 };
 200
 201 &pcs_mdio3 {
 202         status = "okay";
 203 };
 204
 205 &pcs_mdio4 {
 206         status = "okay";
 207 };
 208
 209 &sata0 {
 210         status = "okay";
 211 };
 212
 213 &sata1 {
 214         status = "okay";
 215 };
 216
 217 &sata2 {
 218         status = "okay";
 219 };
 220
 221 &sata3 {
 222         status = "okay";
 223 };
 224
 225 &uart0 {
 226         status = "okay";
 227 };
 228
 229 &uart1 {
 230         status = "okay";
 231 };
 232
 233 &usb0 {
 234         status = "okay";
 235 };
 236
 237 &usb1 {
 238         status = "okay";
 239 };