1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 // Device Tree file for LX2160ARDB
5 // Copyright 2018-2020 NXP
9 #include "fsl-lx2160a.dtsi"
12 model = "NXP Layerscape LX2160ARDB";
13 compatible = "fsl,lx2160a-rdb", "fsl,lx2160a";
23 stdout-path = "serial0:115200n8";
26 sb_3v3: regulator-sb3v3 {
27 compatible = "regulator-fixed";
28 regulator-name = "MC34717-3.3VSB";
29 regulator-min-microvolt = <3300000>;
30 regulator-max-microvolt = <3300000>;
41 phy-handle = <&aquantia_phy1>;
42 phy-connection-type = "usxgmii";
43 managed = "in-band-status";
47 phy-handle = <&aquantia_phy2>;
48 phy-connection-type = "usxgmii";
49 managed = "in-band-status";
53 phy-handle = <&rgmii_phy1>;
54 phy-connection-type = "rgmii-id";
58 phy-handle = <&rgmii_phy2>;
59 phy-connection-type = "rgmii-id";
65 rgmii_phy1: ethernet-phy@1 {
67 compatible = "ethernet-phy-id004d.d072";
68 interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>;
73 rgmii_phy2: ethernet-phy@2 {
75 compatible = "ethernet-phy-id004d.d072";
76 interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>;
81 aquantia_phy1: ethernet-phy@4 {
83 compatible = "ethernet-phy-ieee802.3-c45";
84 interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>;
88 aquantia_phy2: ethernet-phy@5 {
90 compatible = "ethernet-phy-ieee802.3-c45";
91 interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>;
100 max-bitrate = <5000000>;
108 max-bitrate = <5000000>;
130 mt35xu512aba0: flash@0 {
131 #address-cells = <1>;
133 compatible = "jedec,spi-nor";
135 spi-max-frequency = <50000000>;
137 spi-rx-bus-width = <8>;
138 spi-tx-bus-width = <8>;
141 mt35xu512aba1: flash@1 {
142 #address-cells = <1>;
144 compatible = "jedec,spi-nor";
146 spi-max-frequency = <50000000>;
148 spi-rx-bus-width = <8>;
149 spi-tx-bus-width = <8>;
157 compatible = "nxp,pca9547";
159 #address-cells = <1>;
163 #address-cells = <1>;
168 compatible = "ti,ina220";
170 shunt-resistor = <500>;
175 #address-cells = <1>;
179 temperature-sensor@4c {
180 compatible = "nxp,sa56004";
182 vcc-supply = <&sb_3v3>;
185 temperature-sensor@4d {
186 compatible = "nxp,sa56004";
188 vcc-supply = <&sb_3v3>;
198 compatible = "nxp,pcf2129";
200 /* IRQ_RTC_B -> IRQ08, active low */
201 interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>;