arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung Exynos5433 TM2 board device tree source
   4  *
   5  * Copyright (c) 2016 Samsung Electronics Co., Ltd.
   6  *
   7  * Common device tree source file for Samsung's TM2 and TM2E boards
   8  * which are based on Samsung Exynos5433 SoC.
   9  */
  10
  11 /dts-v1/;
  12 #include "exynos5433.dtsi"
  13 #include <dt-bindings/clock/samsung,s2mps11.h>
  14 #include <dt-bindings/gpio/gpio.h>
  15 #include <dt-bindings/input/input.h>
  16 #include <dt-bindings/interrupt-controller/irq.h>
  17 #include <dt-bindings/sound/samsung-i2s.h>
  18
  19 / {
  20         aliases {
  21                 gsc0 = &gsc_0;
  22                 gsc1 = &gsc_1;
  23                 gsc2 = &gsc_2;
  24                 pinctrl0 = &pinctrl_alive;
  25                 pinctrl1 = &pinctrl_aud;
  26                 pinctrl2 = &pinctrl_cpif;
  27                 pinctrl3 = &pinctrl_ese;
  28                 pinctrl4 = &pinctrl_finger;
  29                 pinctrl5 = &pinctrl_fsys;
  30                 pinctrl6 = &pinctrl_imem;
  31                 pinctrl7 = &pinctrl_nfc;
  32                 pinctrl8 = &pinctrl_peric;
  33                 pinctrl9 = &pinctrl_touch;
  34                 serial0 = &serial_0;
  35                 serial1 = &serial_1;
  36                 serial2 = &serial_2;
  37                 serial3 = &serial_3;
  38                 spi0 = &spi_0;
  39                 spi1 = &spi_1;
  40                 spi2 = &spi_2;
  41                 spi3 = &spi_3;
  42                 spi4 = &spi_4;
  43                 mshc0 = &mshc_0;
  44                 mshc2 = &mshc_2;
  45         };
  46
  47         chosen {
  48                 stdout-path = &serial_1;
  49         };
  50
  51         memory@20000000 {
  52                 device_type = "memory";
  53                 reg = <0x0 0x20000000 0x0 0xc0000000>;
  54         };
  55
  56         gpio-keys {
  57                 compatible = "gpio-keys";
  58
  59                 power-key {
  60                         gpios = <&gpa2 7 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_POWER>;
  62                         label = "power key";
  63                         debounce-interval = <10>;
  64                 };
  65
  66                 volume-up-key {
  67                         gpios = <&gpa2 0 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_VOLUMEUP>;
  69                         label = "volume-up key";
  70                         debounce-interval = <10>;
  71                 };
  72
  73                 volume-down-key {
  74                         gpios = <&gpa2 1 GPIO_ACTIVE_LOW>;
  75                         linux,code = <KEY_VOLUMEDOWN>;
  76                         label = "volume-down key";
  77                         debounce-interval = <10>;
  78                 };
  79
  80                 homepage-key {
  81                         gpios = <&gpa0 3 GPIO_ACTIVE_LOW>;
  82                         linux,code = <KEY_MENU>;
  83                         label = "homepage key";
  84                         debounce-interval = <10>;
  85                 };
  86         };
  87
  88         i2c_max98504: i2c-gpio-0 {
  89                 compatible = "i2c-gpio";
  90                 sda-gpios = <&gpd0 1 GPIO_ACTIVE_HIGH>;
  91                 scl-gpios = <&gpd0 0 GPIO_ACTIVE_HIGH>;
  92                 i2c-gpio,delay-us = <2>;
  93                 #address-cells = <1>;
  94                 #size-cells = <0>;
  95
  96                 max98504: amplifier@31 {
  97                         compatible = "maxim,max98504";
  98                         reg = <0x31>;
  99                         maxim,rx-path = <1>;
 100                         maxim,tx-path = <1>;
 101                         maxim,tx-channel-mask = <3>;
 102                         maxim,tx-channel-source = <2>;
 103                 };
 104         };
 105
 106         irda_regulator: irda-regulator {
 107                 compatible = "regulator-fixed";
 108                 enable-active-high;
 109                 gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
 110                 regulator-name = "irda_regulator";
 111         };
 112
 113         sound {
 114                 compatible = "samsung,tm2-audio";
 115                 audio-codec = <&wm5110>, <&hdmi>;
 116                 i2s-controller = <&i2s0 0>, <&i2s1 0>;
 117                 audio-amplifier = <&max98504>;
 118                 mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>;
 119                 model = "wm5110";
 120                 samsung,audio-routing =
 121                         /* Headphone */
 122                         "HP", "HPOUT1L",
 123                         "HP", "HPOUT1R",
 124
 125                         /* Speaker */
 126                         "SPK", "SPKOUT",
 127                         "SPKOUT", "HPOUT2L",
 128                         "SPKOUT", "HPOUT2R",
 129
 130                         /* Receiver */
 131                         "RCV", "HPOUT3L",
 132                         "RCV", "HPOUT3R";
 133                 status = "okay";
 134         };
 135 };
 136
 137 &adc {
 138         vdd-supply = <&ldo3_reg>;
 139         status = "okay";
 140
 141         thermistor-ap {
 142                 compatible = "murata,ncp03wf104";
 143                 pullup-uv = <1800000>;
 144                 pullup-ohm = <100000>;
 145                 pulldown-ohm = <0>;
 146                 io-channels = <&adc 0>;
 147         };
 148
 149         thermistor-battery {
 150                 compatible = "murata,ncp03wf104";
 151                 pullup-uv = <1800000>;
 152                 pullup-ohm = <100000>;
 153                 pulldown-ohm = <0>;
 154                 io-channels = <&adc 1>;
 155                 #thermal-sensor-cells = <0>;
 156         };
 157
 158         thermistor-charger {
 159                 compatible = "murata,ncp03wf104";
 160                 pullup-uv = <1800000>;
 161                 pullup-ohm = <100000>;
 162                 pulldown-ohm = <0>;
 163                 io-channels = <&adc 2>;
 164         };
 165 };
 166
 167 &bus_g2d_400 {
 168         devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>;
 169         vdd-supply = <&buck4_reg>;
 170         exynos,saturation-ratio = <10>;
 171         status = "okay";
 172 };
 173
 174 &bus_g2d_266 {
 175         devfreq = <&bus_g2d_400>;
 176         status = "okay";
 177 };
 178
 179 &bus_gscl {
 180         devfreq = <&bus_g2d_400>;
 181         status = "okay";
 182 };
 183
 184 &bus_hevc {
 185         devfreq = <&bus_g2d_400>;
 186         status = "okay";
 187 };
 188
 189 &bus_jpeg {
 190         devfreq = <&bus_g2d_400>;
 191         status = "okay";
 192 };
 193
 194 &bus_mfc {
 195         devfreq = <&bus_g2d_400>;
 196         status = "okay";
 197 };
 198
 199 &bus_mscl {
 200         devfreq = <&bus_g2d_400>;
 201         status = "okay";
 202 };
 203
 204 &bus_noc0 {
 205         devfreq = <&bus_g2d_400>;
 206         status = "okay";
 207 };
 208
 209 &bus_noc1 {
 210         devfreq = <&bus_g2d_400>;
 211         status = "okay";
 212 };
 213
 214 &bus_noc2 {
 215         devfreq = <&bus_g2d_400>;
 216         status = "okay";
 217 };
 218
 219 &cmu_aud {
 220         assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 221                 <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>,
 222                 <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>,
 223                 <&cmu_top CLK_MOUT_AUD_PLL>,
 224                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 225                 <&cmu_top CLK_MOUT_SCLK_AUDIO0>,
 226                 <&cmu_top CLK_MOUT_SCLK_AUDIO1>,
 227                 <&cmu_top CLK_MOUT_SCLK_SPDIF>,
 228
 229                 <&cmu_aud CLK_DIV_AUD_CA5>,
 230                 <&cmu_aud CLK_DIV_ACLK_AUD>,
 231                 <&cmu_aud CLK_DIV_PCLK_DBG_AUD>,
 232                 <&cmu_aud CLK_DIV_SCLK_AUD_I2S>,
 233                 <&cmu_aud CLK_DIV_SCLK_AUD_PCM>,
 234                 <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>,
 235                 <&cmu_aud CLK_DIV_SCLK_AUD_UART>,
 236                 <&cmu_top CLK_DIV_SCLK_AUDIO0>,
 237                 <&cmu_top CLK_DIV_SCLK_AUDIO1>,
 238                 <&cmu_top CLK_DIV_SCLK_PCM1>,
 239                 <&cmu_top CLK_DIV_SCLK_I2S1>;
 240
 241         assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>,
 242                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 243                 <&cmu_aud CLK_MOUT_AUD_PLL_USER>,
 244                 <&cmu_top CLK_FOUT_AUD_PLL>,
 245                 <&cmu_top CLK_MOUT_AUD_PLL>,
 246                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 247                 <&cmu_top CLK_MOUT_AUD_PLL_USER_T>,
 248                 <&cmu_top CLK_SCLK_AUDIO0>;
 249
 250         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 251                 <196608001>, <65536001>, <32768001>, <49152001>,
 252                 <2048001>, <24576001>, <196608001>,
 253                 <24576001>, <98304001>, <2048001>, <49152001>;
 254 };
 255
 256 &cmu_fsys {
 257         assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 258                 <&cmu_top CLK_MOUT_SCLK_USBHOST30>,
 259                 <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>,
 260                 <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>,
 261                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>,
 262                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>,
 263                 <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>,
 264                 <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>,
 265                 <&cmu_top CLK_DIV_SCLK_USBDRD30>,
 266                 <&cmu_top CLK_DIV_SCLK_USBHOST30>;
 267         assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 268                 <&cmu_top CLK_MOUT_BUS_PLL_USER>,
 269                 <&cmu_top CLK_SCLK_USBDRD30_FSYS>,
 270                 <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
 271                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>,
 272                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>,
 273                 <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>,
 274                 <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>;
 275         assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>,
 276                                <66700000>, <66700000>;
 277 };
 278
 279 &cmu_gscl {
 280         assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>,
 281                           <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>;
 282         assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>,
 283                                  <&cmu_top CLK_ACLK_GSCL_333>;
 284 };
 285
 286 &cmu_mfc {
 287         assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>;
 288         assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>;
 289 };
 290
 291 &cmu_mif {
 292         assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DSD_A>, <&cmu_mif CLK_DIV_SCLK_DSD>;
 293         assigned-clock-parents = <&cmu_mif CLK_MOUT_MFC_PLL_DIV2>;
 294         assigned-clock-rates = <0>, <333000000>;
 295 };
 296
 297 &cmu_mscl {
 298         assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>,
 299                           <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 300                           <&cmu_mscl CLK_MOUT_SCLK_JPEG>,
 301                           <&cmu_top CLK_MOUT_SCLK_JPEG_A>;
 302         assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>,
 303                                  <&cmu_top CLK_SCLK_JPEG_MSCL>,
 304                                  <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>,
 305                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 306 };
 307
 308 &cmu_top {
 309         assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>;
 310         assigned-clock-rates = <196608001>;
 311 };
 312
 313 &cpu0 {
 314         cpu-supply = <&buck3_reg>;
 315 };
 316
 317 &cpu4 {
 318         cpu-supply = <&buck2_reg>;
 319 };
 320
 321 &decon {
 322         status = "okay";
 323 };
 324
 325 &decon_tv {
 326         status = "okay";
 327
 328         ports {
 329                 #address-cells = <1>;
 330                 #size-cells = <0>;
 331
 332                 port@0 {
 333                         reg = <0>;
 334                         tv_to_hdmi: endpoint {
 335                                 remote-endpoint = <&hdmi_to_tv>;
 336                         };
 337                 };
 338         };
 339 };
 340
 341 &dsi {
 342         status = "okay";
 343         vddcore-supply = <&ldo6_reg>;
 344         vddio-supply = <&ldo7_reg>;
 345         samsung,burst-clock-frequency = <512000000>;
 346         samsung,esc-clock-frequency = <16000000>;
 347         samsung,pll-clock-frequency = <24000000>;
 348         pinctrl-names = "default";
 349         pinctrl-0 = <&te_irq>;
 350 };
 351
 352 &gpu {
 353         mali-supply = <&buck6_reg>;
 354         status = "okay";
 355 };
 356
 357 &hdmi {
 358         hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
 359         status = "okay";
 360         vdd-supply = <&ldo6_reg>;
 361         vdd_osc-supply = <&ldo7_reg>;
 362         vdd_pll-supply = <&ldo6_reg>;
 363
 364         ports {
 365                 #address-cells = <1>;
 366                 #size-cells = <0>;
 367
 368                 port@0 {
 369                         reg = <0>;
 370                         hdmi_to_tv: endpoint {
 371                                 remote-endpoint = <&tv_to_hdmi>;
 372                         };
 373                 };
 374
 375                 port@1 {
 376                         reg = <1>;
 377                         hdmi_to_mhl: endpoint {
 378                                 remote-endpoint = <&mhl_to_hdmi>;
 379                         };
 380                 };
 381         };
 382 };
 383
 384 &hsi2c_0 {
 385         status = "okay";
 386         clock-frequency = <2500000>;
 387
 388         pmic@66 {
 389                 compatible = "samsung,s2mps13-pmic";
 390                 interrupt-parent = <&gpa0>;
 391                 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 392                 reg = <0x66>;
 393                 samsung,s2mps11-wrstbi-ground;
 394
 395                 s2mps13_osc: clocks {
 396                         compatible = "samsung,s2mps13-clk";
 397                         #clock-cells = <1>;
 398                         clock-output-names = "s2mps13_ap", "s2mps13_cp",
 399                                 "s2mps13_bt";
 400                 };
 401
 402                 regulators {
 403                         ldo1_reg: LDO1 {
 404                                 regulator-name = "VDD_ALIVE_0.9V_AP";
 405                                 regulator-min-microvolt = <900000>;
 406                                 regulator-max-microvolt = <900000>;
 407                                 regulator-always-on;
 408                         };
 409
 410                         ldo2_reg: LDO2 {
 411                                 regulator-name = "VDDQ_MMC2_2.8V_AP";
 412                                 regulator-min-microvolt = <2800000>;
 413                                 regulator-max-microvolt = <2800000>;
 414                                 regulator-always-on;
 415                                 regulator-state-mem {
 416                                         regulator-off-in-suspend;
 417                                 };
 418                         };
 419
 420                         ldo3_reg: LDO3 {
 421                                 regulator-name = "VDD1_E_1.8V_AP";
 422                                 regulator-min-microvolt = <1800000>;
 423                                 regulator-max-microvolt = <1800000>;
 424                                 regulator-always-on;
 425                         };
 426
 427                         ldo4_reg: LDO4 {
 428                                 regulator-name = "VDD10_MIF_PLL_1.0V_AP";
 429                                 regulator-min-microvolt = <1300000>;
 430                                 regulator-max-microvolt = <1300000>;
 431                                 regulator-always-on;
 432                                 regulator-state-mem {
 433                                         regulator-off-in-suspend;
 434                                 };
 435                         };
 436
 437                         ldo5_reg: LDO5 {
 438                                 regulator-name = "VDD10_DPLL_1.0V_AP";
 439                                 regulator-min-microvolt = <1000000>;
 440                                 regulator-max-microvolt = <1000000>;
 441                                 regulator-always-on;
 442                                 regulator-state-mem {
 443                                         regulator-off-in-suspend;
 444                                 };
 445                         };
 446
 447                         ldo6_reg: LDO6 {
 448                                 regulator-name = "VDD10_MIPI2L_1.0V_AP";
 449                                 regulator-min-microvolt = <1000000>;
 450                                 regulator-max-microvolt = <1000000>;
 451                                 regulator-state-mem {
 452                                         regulator-off-in-suspend;
 453                                 };
 454                         };
 455
 456                         ldo7_reg: LDO7 {
 457                                 regulator-name = "VDD18_MIPI2L_1.8V_AP";
 458                                 regulator-min-microvolt = <1800000>;
 459                                 regulator-max-microvolt = <1800000>;
 460                                 regulator-always-on;
 461                                 regulator-state-mem {
 462                                         regulator-off-in-suspend;
 463                                 };
 464                         };
 465
 466                         ldo8_reg: LDO8 {
 467                                 regulator-name = "VDD18_LLI_1.8V_AP";
 468                                 regulator-min-microvolt = <1800000>;
 469                                 regulator-max-microvolt = <1800000>;
 470                                 regulator-always-on;
 471                                 regulator-state-mem {
 472                                         regulator-off-in-suspend;
 473                                 };
 474                         };
 475
 476                         ldo9_reg: LDO9 {
 477                                 regulator-name = "VDD18_ABB_ETC_1.8V_AP";
 478                                 regulator-min-microvolt = <1800000>;
 479                                 regulator-max-microvolt = <1800000>;
 480                                 regulator-always-on;
 481                                 regulator-state-mem {
 482                                         regulator-off-in-suspend;
 483                                 };
 484                         };
 485
 486                         ldo10_reg: LDO10 {
 487                                 regulator-name = "VDD33_USB30_3.0V_AP";
 488                                 regulator-min-microvolt = <3000000>;
 489                                 regulator-max-microvolt = <3000000>;
 490                                 regulator-state-mem {
 491                                         regulator-off-in-suspend;
 492                                 };
 493                         };
 494
 495                         ldo11_reg: LDO11 {
 496                                 regulator-name = "VDD_INT_M_1.0V_AP";
 497                                 regulator-min-microvolt = <1000000>;
 498                                 regulator-max-microvolt = <1000000>;
 499                                 regulator-always-on;
 500                                 regulator-state-mem {
 501                                         regulator-off-in-suspend;
 502                                 };
 503                         };
 504
 505                         ldo12_reg: LDO12 {
 506                                 regulator-name = "VDD_KFC_M_1.1V_AP";
 507                                 regulator-min-microvolt = <800000>;
 508                                 regulator-max-microvolt = <1350000>;
 509                                 regulator-always-on;
 510                         };
 511
 512                         ldo13_reg: LDO13 {
 513                                 regulator-name = "VDD_G3D_M_0.95V_AP";
 514                                 regulator-min-microvolt = <950000>;
 515                                 regulator-max-microvolt = <950000>;
 516                                 regulator-always-on;
 517                                 regulator-state-mem {
 518                                         regulator-off-in-suspend;
 519                                 };
 520                         };
 521
 522                         ldo14_reg: LDO14 {
 523                                 regulator-name = "VDDQ_M1_LDO_1.2V_AP";
 524                                 regulator-min-microvolt = <1200000>;
 525                                 regulator-max-microvolt = <1200000>;
 526                                 regulator-always-on;
 527                                 regulator-state-mem {
 528                                         regulator-off-in-suspend;
 529                                 };
 530                         };
 531
 532                         ldo15_reg: LDO15 {
 533                                 regulator-name = "VDDQ_M2_LDO_1.2V_AP";
 534                                 regulator-min-microvolt = <1200000>;
 535                                 regulator-max-microvolt = <1200000>;
 536                                 regulator-always-on;
 537                                 regulator-state-mem {
 538                                         regulator-off-in-suspend;
 539                                 };
 540                         };
 541
 542                         ldo16_reg: LDO16 {
 543                                 regulator-name = "VDDQ_EFUSE";
 544                                 regulator-min-microvolt = <1400000>;
 545                                 regulator-max-microvolt = <3400000>;
 546                                 regulator-always-on;
 547                         };
 548
 549                         ldo17_reg: LDO17 {
 550                                 regulator-name = "V_TFLASH_2.8V_AP";
 551                                 regulator-min-microvolt = <2800000>;
 552                                 regulator-max-microvolt = <2800000>;
 553                         };
 554
 555                         ldo18_reg: LDO18 {
 556                                 regulator-name = "V_CODEC_1.8V_AP";
 557                                 regulator-min-microvolt = <1800000>;
 558                                 regulator-max-microvolt = <1800000>;
 559                         };
 560
 561                         ldo19_reg: LDO19 {
 562                                 regulator-name = "VDDA_1.8V_COMP";
 563                                 regulator-min-microvolt = <1800000>;
 564                                 regulator-max-microvolt = <1800000>;
 565                                 regulator-always-on;
 566                         };
 567
 568                         ldo20_reg: LDO20 {
 569                                 regulator-name = "VCC_2.8V_AP";
 570                                 regulator-min-microvolt = <2800000>;
 571                                 regulator-max-microvolt = <2800000>;
 572                                 regulator-always-on;
 573                         };
 574
 575                         ldo21_reg: LDO21 {
 576                                 regulator-name = "VT_CAM_1.8V";
 577                                 regulator-min-microvolt = <1800000>;
 578                                 regulator-max-microvolt = <1800000>;
 579                         };
 580
 581                         ldo22_reg: LDO22 {
 582                                 regulator-name = "CAM_IO_1.8V_AP";
 583                                 regulator-min-microvolt = <1800000>;
 584                                 regulator-max-microvolt = <1800000>;
 585                         };
 586
 587                         ldo23_reg: LDO23 {
 588                                 regulator-name = "CAM_SEN_CORE_1.05V_AP";
 589                                 regulator-min-microvolt = <1050000>;
 590                                 regulator-max-microvolt = <1050000>;
 591                         };
 592
 593                         ldo24_reg: LDO24 {
 594                                 regulator-name = "VT_CAM_1.2V";
 595                                 regulator-min-microvolt = <1200000>;
 596                                 regulator-max-microvolt = <1200000>;
 597                         };
 598
 599                         ldo25_reg: LDO25 {
 600                                 regulator-name = "UNUSED_LDO25";
 601                                 regulator-min-microvolt = <2800000>;
 602                                 regulator-max-microvolt = <2800000>;
 603                         };
 604
 605                         ldo26_reg: LDO26 {
 606                                 regulator-name = "CAM_AF_2.8V_AP";
 607                                 regulator-min-microvolt = <2800000>;
 608                                 regulator-max-microvolt = <2800000>;
 609                         };
 610
 611                         ldo27_reg: LDO27 {
 612                                 regulator-name = "VCC_3.0V_LCD_AP";
 613                                 regulator-min-microvolt = <3000000>;
 614                                 regulator-max-microvolt = <3000000>;
 615                         };
 616
 617                         ldo28_reg: LDO28 {
 618                                 regulator-name = "VCC_1.8V_LCD_AP";
 619                                 regulator-min-microvolt = <1800000>;
 620                                 regulator-max-microvolt = <1800000>;
 621                         };
 622
 623                         ldo29_reg: LDO29 {
 624                                 regulator-name = "VT_CAM_2.8V";
 625                                 regulator-min-microvolt = <3000000>;
 626                                 regulator-max-microvolt = <3000000>;
 627                         };
 628
 629                         ldo30_reg: LDO30 {
 630                                 regulator-name = "TSP_AVDD_3.3V_AP";
 631                                 regulator-min-microvolt = <3300000>;
 632                                 regulator-max-microvolt = <3300000>;
 633                         };
 634
 635                         ldo31_reg: LDO31 {
 636                                 /*
 637                                  * LDO31 differs from target to target,
 638                                  * its definition is in the .dts
 639                                  */
 640                         };
 641
 642                         ldo32_reg: LDO32 {
 643                                 regulator-name = "VTOUCH_1.8V_AP";
 644                                 regulator-min-microvolt = <1800000>;
 645                                 regulator-max-microvolt = <1800000>;
 646                         };
 647
 648                         ldo33_reg: LDO33 {
 649                                 regulator-name = "VTOUCH_LED_3.3V";
 650                                 regulator-min-microvolt = <2500000>;
 651                                 regulator-max-microvolt = <3300000>;
 652                                 regulator-ramp-delay = <12500>;
 653                         };
 654
 655                         ldo34_reg: LDO34 {
 656                                 regulator-name = "VCC_1.8V_MHL_AP";
 657                                 regulator-min-microvolt = <1000000>;
 658                                 regulator-max-microvolt = <2100000>;
 659                         };
 660
 661                         ldo35_reg: LDO35 {
 662                                 regulator-name = "OIS_VM_2.8V";
 663                                 regulator-min-microvolt = <1800000>;
 664                                 regulator-max-microvolt = <2800000>;
 665                         };
 666
 667                         ldo36_reg: LDO36 {
 668                                 regulator-name = "VSIL_1.0V";
 669                                 regulator-min-microvolt = <1000000>;
 670                                 regulator-max-microvolt = <1000000>;
 671                         };
 672
 673                         ldo37_reg: LDO37 {
 674                                 regulator-name = "VF_1.8V";
 675                                 regulator-min-microvolt = <1800000>;
 676                                 regulator-max-microvolt = <1800000>;
 677                         };
 678
 679                         ldo38_reg: LDO38 {
 680                                 /*
 681                                  * LDO38 differs from target to target,
 682                                  * its definition is in the .dts
 683                                  */
 684                         };
 685
 686                         ldo39_reg: LDO39 {
 687                                 regulator-name = "V_HRM_1.8V";
 688                                 regulator-min-microvolt = <1800000>;
 689                                 regulator-max-microvolt = <1800000>;
 690                         };
 691
 692                         ldo40_reg: LDO40 {
 693                                 regulator-name = "V_HRM_3.3V";
 694                                 regulator-min-microvolt = <3300000>;
 695                                 regulator-max-microvolt = <3300000>;
 696                         };
 697
 698                         buck1_reg: BUCK1 {
 699                                 regulator-name = "VDD_MIF_0.9V_AP";
 700                                 regulator-min-microvolt = <600000>;
 701                                 regulator-max-microvolt = <1500000>;
 702                                 regulator-always-on;
 703                                 regulator-state-mem {
 704                                         regulator-off-in-suspend;
 705                                 };
 706                         };
 707
 708                         buck2_reg: BUCK2 {
 709                                 regulator-name = "VDD_EGL_1.0V_AP";
 710                                 regulator-min-microvolt = <900000>;
 711                                 regulator-max-microvolt = <1300000>;
 712                                 regulator-always-on;
 713                                 regulator-state-mem {
 714                                         regulator-off-in-suspend;
 715                                 };
 716                         };
 717
 718                         buck3_reg: BUCK3 {
 719                                 regulator-name = "VDD_KFC_1.0V_AP";
 720                                 regulator-min-microvolt = <800000>;
 721                                 regulator-max-microvolt = <1200000>;
 722                                 regulator-always-on;
 723                                 regulator-state-mem {
 724                                         regulator-off-in-suspend;
 725                                 };
 726                         };
 727
 728                         buck4_reg: BUCK4 {
 729                                 regulator-name = "VDD_INT_0.95V_AP";
 730                                 regulator-min-microvolt = <600000>;
 731                                 regulator-max-microvolt = <1500000>;
 732                                 regulator-always-on;
 733                                 regulator-state-mem {
 734                                         regulator-off-in-suspend;
 735                                 };
 736                         };
 737
 738                         buck5_reg: BUCK5 {
 739                                 regulator-name = "VDD_DISP_CAM0_0.9V_AP";
 740                                 regulator-min-microvolt = <600000>;
 741                                 regulator-max-microvolt = <1500000>;
 742                                 regulator-always-on;
 743                                 regulator-state-mem {
 744                                         regulator-off-in-suspend;
 745                                 };
 746                         };
 747
 748                         buck6_reg: BUCK6 {
 749                                 regulator-name = "VDD_G3D_0.9V_AP";
 750                                 regulator-min-microvolt = <600000>;
 751                                 regulator-max-microvolt = <1500000>;
 752                                 regulator-always-on;
 753                                 regulator-state-mem {
 754                                         regulator-off-in-suspend;
 755                                 };
 756                         };
 757
 758                         buck7_reg: BUCK7 {
 759                                 regulator-name = "VDD_MEM1_1.2V_AP";
 760                                 regulator-min-microvolt = <1200000>;
 761                                 regulator-max-microvolt = <1200000>;
 762                                 regulator-always-on;
 763                         };
 764
 765                         buck8_reg: BUCK8 {
 766                                 regulator-name = "VDD_LLDO_1.35V_AP";
 767                                 regulator-min-microvolt = <1350000>;
 768                                 regulator-max-microvolt = <3300000>;
 769                                 regulator-always-on;
 770                         };
 771
 772                         buck9_reg: BUCK9 {
 773                                 regulator-name = "VDD_MLDO_2.0V_AP";
 774                                 regulator-min-microvolt = <1350000>;
 775                                 regulator-max-microvolt = <3300000>;
 776                                 regulator-always-on;
 777                         };
 778
 779                         buck10_reg: BUCK10 {
 780                                 regulator-name = "vdd_mem2";
 781                                 regulator-min-microvolt = <550000>;
 782                                 regulator-max-microvolt = <1500000>;
 783                                 regulator-always-on;
 784                         };
 785                 };
 786         };
 787 };
 788
 789 &hsi2c_4 {
 790         status = "okay";
 791
 792         s3fwrn5: nfc@27 {
 793                 compatible = "samsung,s3fwrn5-i2c";
 794                 reg = <0x27>;
 795                 interrupt-parent = <&gpa1>;
 796                 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 797                 en-gpios = <&gpf1 4 GPIO_ACTIVE_HIGH>;
 798                 wake-gpios = <&gpj0 2 GPIO_ACTIVE_HIGH>;
 799         };
 800 };
 801
 802 &hsi2c_5 {
 803         status = "okay";
 804
 805         stmfts: touchscreen@49 {
 806                 compatible = "st,stmfts";
 807                 reg = <0x49>;
 808                 interrupt-parent = <&gpa1>;
 809                 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 810                 avdd-supply = <&ldo30_reg>;
 811                 vdd-supply = <&ldo31_reg>;
 812         };
 813 };
 814
 815 &hsi2c_7 {
 816         status = "okay";
 817         clock-frequency = <1000000>;
 818
 819         bridge@39 {
 820                 reg = <0x39>;
 821                 compatible = "sil,sii8620";
 822                 cvcc10-supply = <&ldo36_reg>;
 823                 iovcc18-supply = <&ldo34_reg>;
 824                 interrupt-parent = <&gpf0>;
 825                 interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
 826                 reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
 827                 clocks = <&pmu_system_controller 0>;
 828                 clock-names = "xtal";
 829
 830                 ports {
 831                         #address-cells = <1>;
 832                         #size-cells = <0>;
 833
 834                         port@0 {
 835                                 reg = <0>;
 836                                 mhl_to_hdmi: endpoint {
 837                                         remote-endpoint = <&hdmi_to_mhl>;
 838                                 };
 839                         };
 840
 841                         port@1 {
 842                                 reg = <1>;
 843                                 mhl_to_musb_con: endpoint {
 844                                         remote-endpoint = <&musb_con_to_mhl>;
 845                                 };
 846                         };
 847                 };
 848         };
 849 };
 850
 851 &hsi2c_8 {
 852         status = "okay";
 853
 854         pmic@66 {
 855                 compatible = "maxim,max77843";
 856                 interrupt-parent = <&gpa1>;
 857                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 858                 reg = <0x66>;
 859
 860                 muic: max77843-muic {
 861                         compatible = "maxim,max77843-muic";
 862
 863                         musb_con: musb-connector {
 864                                 compatible = "samsung,usb-connector-11pin",
 865                                              "usb-b-connector";
 866                                 label = "micro-USB";
 867                                 type = "micro";
 868
 869                                 ports {
 870                                         #address-cells = <1>;
 871                                         #size-cells = <0>;
 872
 873                                         port@3 {
 874                                                 reg = <3>;
 875                                                 musb_con_to_mhl: endpoint {
 876                                                         remote-endpoint = <&mhl_to_musb_con>;
 877                                                 };
 878                                         };
 879                                 };
 880                         };
 881
 882                         ports {
 883                                 port {
 884                                         muic_to_usb: endpoint {
 885                                                 remote-endpoint = <&usb_to_muic>;
 886                                         };
 887                                 };
 888                         };
 889                 };
 890
 891                 regulators {
 892                         compatible = "maxim,max77843-regulator";
 893                         safeout1_reg: SAFEOUT1 {
 894                                 regulator-name = "SAFEOUT1";
 895                                 regulator-min-microvolt = <3300000>;
 896                                 regulator-max-microvolt = <4950000>;
 897                         };
 898
 899                         safeout2_reg: SAFEOUT2 {
 900                                 regulator-name = "SAFEOUT2";
 901                                 regulator-min-microvolt = <3300000>;
 902                                 regulator-max-microvolt = <4950000>;
 903                         };
 904
 905                         charger_reg: CHARGER {
 906                                 regulator-name = "CHARGER";
 907                                 regulator-min-microamp = <100000>;
 908                                 regulator-max-microamp = <3150000>;
 909                         };
 910                 };
 911
 912                 haptic: max77843-haptic {
 913                         compatible = "maxim,max77843-haptic";
 914                         haptic-supply = <&ldo38_reg>;
 915                         pwms = <&pwm 0 33670 0>;
 916                         pwm-names = "haptic";
 917                 };
 918         };
 919 };
 920
 921 &hsi2c_11 {
 922         status = "okay";
 923 };
 924
 925 &i2s0 {
 926         status = "okay";
 927 };
 928
 929 &i2s1 {
 930         assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>;
 931         assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>;
 932         status = "okay";
 933 };
 934
 935 &mshc_0 {
 936         status = "okay";
 937         mmc-hs200-1_8v;
 938         mmc-hs400-1_8v;
 939         cap-mmc-highspeed;
 940         non-removable;
 941         card-detect-delay = <200>;
 942         samsung,dw-mshc-ciu-div = <3>;
 943         samsung,dw-mshc-sdr-timing = <0 4>;
 944         samsung,dw-mshc-ddr-timing = <0 2>;
 945         samsung,dw-mshc-hs400-timing = <0 3>;
 946         samsung,read-strobe-delay = <90>;
 947         fifo-depth = <0x80>;
 948         pinctrl-names = "default";
 949         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4
 950                         &sd0_bus8 &sd0_rdqs>;
 951         bus-width = <8>;
 952         assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>;
 953         assigned-clock-rates = <800000000>;
 954 };
 955
 956 &mshc_2 {
 957         status = "okay";
 958         cap-sd-highspeed;
 959         disable-wp;
 960         cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
 961         card-detect-delay = <200>;
 962         samsung,dw-mshc-ciu-div = <3>;
 963         samsung,dw-mshc-sdr-timing = <0 4>;
 964         samsung,dw-mshc-ddr-timing = <0 2>;
 965         fifo-depth = <0x80>;
 966         pinctrl-names = "default";
 967         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>;
 968         bus-width = <4>;
 969 };
 970
 971 &pcie {
 972         status = "okay";
 973         pinctrl-names = "default";
 974         pinctrl-0 = <&pcie_bus &pcie_wlanen>;
 975         vdd10-supply = <&ldo6_reg>;
 976         vdd18-supply = <&ldo7_reg>;
 977         assigned-clocks = <&cmu_fsys CLK_MOUT_SCLK_PCIE_100_USER>,
 978                           <&cmu_top CLK_MOUT_SCLK_PCIE_100>;
 979         assigned-clock-parents = <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
 980                                  <&cmu_top CLK_MOUT_BUS_PLL_USER>;
 981         assigned-clock-rates = <0>, <100000000>;
 982         interrupt-map-mask = <0 0 0 0>;
 983         interrupt-map = <0 0 0 0 &gic GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
 984 };
 985
 986 &pcie_phy {
 987         status = "okay";
 988 };
 989
 990 &ppmu_d0_general {
 991         status = "okay";
 992         events {
 993                 ppmu_event0_d0_general: ppmu-event0-d0-general {
 994                         event-name = "ppmu-event0-d0-general";
 995                 };
 996         };
 997 };
 998
 999 &ppmu_d1_general {
1000         status = "okay";
1001         events {
1002                 ppmu_event0_d1_general: ppmu-event0-d1-general {
1003                        event-name = "ppmu-event0-d1-general";
1004                };
1005         };
1006 };
1007
1008 &pinctrl_alive {
1009         pinctrl-names = "default";
1010         pinctrl-0 = <&initial_alive>;
1011
1012         initial_alive: initial-state {
1013                 PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
1014                 PIN(INPUT, gpa0-1, NONE, FAST_SR1);
1015                 PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
1016                 PIN(INPUT, gpa0-3, NONE, FAST_SR1);
1017                 PIN(INPUT, gpa0-4, NONE, FAST_SR1);
1018                 PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
1019                 PIN(INPUT, gpa0-6, NONE, FAST_SR1);
1020                 PIN(INPUT, gpa0-7, NONE, FAST_SR1);
1021
1022                 PIN(INPUT, gpa1-0, UP, FAST_SR1);
1023                 PIN(INPUT, gpa1-1, UP, FAST_SR1);
1024                 PIN(INPUT, gpa1-2, NONE, FAST_SR1);
1025                 PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
1026                 PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
1027                 PIN(INPUT, gpa1-5, NONE, FAST_SR1);
1028                 PIN(INPUT, gpa1-6, NONE, FAST_SR1);
1029                 PIN(INPUT, gpa1-7, NONE, FAST_SR1);
1030
1031                 PIN(INPUT, gpa2-0, NONE, FAST_SR1);
1032                 PIN(INPUT, gpa2-1, NONE, FAST_SR1);
1033                 PIN(INPUT, gpa2-2, NONE, FAST_SR1);
1034                 PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
1035                 PIN(INPUT, gpa2-4, NONE, FAST_SR1);
1036                 PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
1037                 PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
1038                 PIN(INPUT, gpa2-7, NONE, FAST_SR1);
1039
1040                 PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
1041                 PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
1042                 PIN(INPUT, gpa3-2, NONE, FAST_SR1);
1043                 PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
1044                 PIN(INPUT, gpa3-4, NONE, FAST_SR1);
1045                 PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
1046                 PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
1047                 PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
1048
1049                 PIN(INPUT, gpf1-0, NONE, FAST_SR1);
1050                 PIN(INPUT, gpf1-1, NONE, FAST_SR1);
1051                 PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
1052                 PIN(INPUT, gpf1-4, UP, FAST_SR1);
1053                 PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
1054                 PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
1055                 PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
1056
1057                 PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
1058                 PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
1059                 PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
1060                 PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
1061
1062                 PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
1063                 PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
1064                 PIN(INPUT, gpf3-2, NONE, FAST_SR1);
1065                 PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
1066
1067                 PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
1068                 PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
1069                 PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
1070                 PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
1071                 PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
1072                 PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
1073                 PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
1074                 PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
1075
1076                 PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
1077                 PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
1078                 PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
1079                 PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
1080                 PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
1081                 PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
1082                 PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
1083                 PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
1084         };
1085
1086         te_irq: te-irq {
1087                 samsung,pins = "gpf1-3";
1088                 samsung,pin-function = <0xf>;
1089         };
1090 };
1091
1092 &pinctrl_cpif {
1093         pinctrl-names = "default";
1094         pinctrl-0 = <&initial_cpif>;
1095
1096         initial_cpif: initial-state {
1097                 PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
1098                 PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
1099         };
1100 };
1101
1102 &pinctrl_ese {
1103         pinctrl-names = "default";
1104         pinctrl-0 = <&initial_ese>;
1105
1106         pcie_wlanen: pcie-wlanen {
1107                 PIN(INPUT, gpj2-0, UP, FAST_SR4);
1108         };
1109
1110         initial_ese: initial-state {
1111                 PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
1112                 PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
1113         };
1114 };
1115
1116 &pinctrl_fsys {
1117         pinctrl-names = "default";
1118         pinctrl-0 = <&initial_fsys>;
1119
1120         initial_fsys: initial-state {
1121                 PIN(INPUT, gpr3-0, NONE, FAST_SR1);
1122                 PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
1123                 PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
1124                 PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
1125                 PIN(INPUT, gpr3-7, NONE, FAST_SR1);
1126         };
1127 };
1128
1129 &pinctrl_imem {
1130         pinctrl-names = "default";
1131         pinctrl-0 = <&initial_imem>;
1132
1133         initial_imem: initial-state {
1134                 PIN(INPUT, gpf0-0, UP, FAST_SR1);
1135                 PIN(INPUT, gpf0-1, UP, FAST_SR1);
1136                 PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
1137                 PIN(INPUT, gpf0-3, UP, FAST_SR1);
1138                 PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
1139                 PIN(INPUT, gpf0-5, NONE, FAST_SR1);
1140                 PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
1141                 PIN(INPUT, gpf0-7, UP, FAST_SR1);
1142         };
1143 };
1144
1145 &pinctrl_nfc {
1146         pinctrl-names = "default";
1147         pinctrl-0 = <&initial_nfc>;
1148
1149         initial_nfc: initial-state {
1150                 PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
1151         };
1152 };
1153
1154 &pinctrl_peric {
1155         pinctrl-names = "default";
1156         pinctrl-0 = <&initial_peric>;
1157
1158         initial_peric: initial-state {
1159                 PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
1160                 PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
1161                 PIN(INPUT, gpv7-2, NONE, FAST_SR1);
1162                 PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
1163                 PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
1164                 PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
1165
1166                 PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
1167
1168                 PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
1169                 PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
1170                 PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
1171
1172                 PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
1173
1174                 PIN(INPUT, gpc3-4, NONE, FAST_SR1);
1175                 PIN(INPUT, gpc3-5, NONE, FAST_SR1);
1176                 PIN(INPUT, gpc3-6, NONE, FAST_SR1);
1177                 PIN(INPUT, gpc3-7, NONE, FAST_SR1);
1178
1179                 PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
1180                 PIN(2, gpg0-1, DOWN, FAST_SR1);
1181
1182                 PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
1183
1184                 PIN(INPUT, gpd4-0, NONE, FAST_SR1);
1185                 PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
1186                 PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
1187                 PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
1188                 PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
1189
1190                 PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
1191
1192                 PIN(INPUT, gpd8-1, UP, FAST_SR1);
1193
1194                 PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
1195                 PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
1196                 PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
1197                 PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
1198                 PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
1199
1200                 PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
1201                 PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
1202
1203                 PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
1204                 PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
1205                 PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
1206         };
1207 };
1208
1209 &pinctrl_touch {
1210         pinctrl-names = "default";
1211         pinctrl-0 = <&initial_touch>;
1212
1213         initial_touch: initial-state {
1214                 PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
1215         };
1216 };
1217
1218 &pwm {
1219         pinctrl-0 = <&pwm0_out>;
1220         pinctrl-names = "default";
1221         status = "okay";
1222 };
1223
1224 &mic {
1225         status = "okay";
1226 };
1227
1228 &pmu_system_controller {
1229         assigned-clocks = <&pmu_system_controller 0>;
1230         assigned-clock-parents = <&xxti>;
1231 };
1232
1233 &serial_1 {
1234         status = "okay";
1235 };
1236
1237 &serial_3 {
1238         status = "okay";
1239
1240         bluetooth {
1241                 compatible = "brcm,bcm43438-bt";
1242                 max-speed = <3000000>;
1243                 shutdown-gpios = <&gpd4 0 GPIO_ACTIVE_HIGH>;
1244                 device-wakeup-gpios = <&gpr3 7 GPIO_ACTIVE_HIGH>;
1245                 host-wakeup-gpios = <&gpa2 2 GPIO_ACTIVE_HIGH>;
1246                 clocks = <&s2mps13_osc S2MPS11_CLK_BT>;
1247                 clock-names = "extclk";
1248         };
1249 };
1250
1251 &spi_1 {
1252         cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>;
1253         status = "okay";
1254
1255         wm5110: audio-codec@0 {
1256                 compatible = "wlf,wm5110";
1257                 reg = <0x0>;
1258                 spi-max-frequency = <20000000>;
1259                 interrupt-parent = <&gpa0>;
1260                 interrupts = <4 IRQ_TYPE_NONE>;
1261                 clocks = <&pmu_system_controller 0>,
1262                         <&s2mps13_osc S2MPS11_CLK_BT>;
1263                 clock-names = "mclk1", "mclk2";
1264
1265                 gpio-controller;
1266                 #gpio-cells = <2>;
1267
1268                 wlf,micd-detect-debounce = <300>;
1269                 wlf,micd-bias-start-time = <0x1>;
1270                 wlf,micd-rate = <0x7>;
1271                 wlf,micd-dbtime = <0x1>;
1272                 wlf,micd-force-micbias;
1273                 wlf,micd-configs = <0x0 1 0>;
1274                 wlf,hpdet-channel = <1>;
1275                 wlf,gpsw = <0x1>;
1276                 wlf,inmode = <2 0 2 0>;
1277
1278                 wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>;
1279                 wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>;
1280
1281                 /* core supplies */
1282                 AVDD-supply = <&ldo18_reg>;
1283                 DBVDD1-supply = <&ldo18_reg>;
1284                 CPVDD-supply = <&ldo18_reg>;
1285                 DBVDD2-supply = <&ldo18_reg>;
1286                 DBVDD3-supply = <&ldo18_reg>;
1287
1288                 controller-data {
1289                         samsung,spi-feedback-delay = <0>;
1290                 };
1291         };
1292 };
1293
1294 &spi_3 {
1295         status = "okay";
1296         no-cs-readback;
1297
1298         irled@0 {
1299                 compatible = "ir-spi-led";
1300                 reg = <0x0>;
1301                 spi-max-frequency = <5000000>;
1302                 power-supply = <&irda_regulator>;
1303                 duty-cycle = <60>;
1304                 led-active-low;
1305
1306                 controller-data {
1307                         samsung,spi-feedback-delay = <0>;
1308                 };
1309         };
1310 };
1311
1312 &timer {
1313         clock-frequency = <24000000>;
1314 };
1315
1316 &tmu_atlas0 {
1317         vtmu-supply = <&ldo3_reg>;
1318         status = "okay";
1319 };
1320
1321 &tmu_apollo {
1322         vtmu-supply = <&ldo3_reg>;
1323         status = "okay";
1324 };
1325
1326 &tmu_g3d {
1327         vtmu-supply = <&ldo3_reg>;
1328         status = "okay";
1329 };
1330
1331 &usbdrd30 {
1332         vdd33-supply = <&ldo10_reg>;
1333         vdd10-supply = <&ldo6_reg>;
1334         status = "okay";
1335 };
1336
1337 &usbdrd_dwc3 {
1338         dr_mode = "otg";
1339 };
1340
1341 &usbdrd30_phy {
1342         vbus-supply = <&safeout1_reg>;
1343         status = "okay";
1344
1345         port {
1346                 usb_to_muic: endpoint {
1347                         remote-endpoint = <&muic_to_usb>;
1348                 };
1349         };
1350 };
1351
1352 &xxti {
1353         clock-frequency = <24000000>;
1354 };