arch/arm64/boot/dts/amlogic/meson-gx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2016 Andreas Färber
   4  *
   5  * Copyright (c) 2016 BayLibre, SAS.
   6  * Author: Neil Armstrong <narmstrong@baylibre.com>
   7  *
   8  * Copyright (c) 2016 Endless Computers, Inc.
   9  * Author: Carlo Caione <carlo@endlessm.com>
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include <dt-bindings/interrupt-controller/irq.h>
  14 #include <dt-bindings/interrupt-controller/arm-gic.h>
  15 #include <dt-bindings/power/meson-gxbb-power.h>
  16 #include <dt-bindings/thermal/thermal.h>
  17
  18 / {
  19         interrupt-parent = <&gic>;
  20         #address-cells = <2>;
  21         #size-cells = <2>;
  22
  23         aliases {
  24                 mmc0 = &sd_emmc_b; /* SD card */
  25                 mmc1 = &sd_emmc_c; /* eMMC */
  26                 mmc2 = &sd_emmc_a; /* SDIO */
  27         };
  28
  29         reserved-memory {
  30                 #address-cells = <2>;
  31                 #size-cells = <2>;
  32                 ranges;
  33
  34                 /* 16 MiB reserved for Hardware ROM Firmware */
  35                 hwrom_reserved: hwrom@0 {
  36                         reg = <0x0 0x0 0x0 0x1000000>;
  37                         no-map;
  38                 };
  39
  40                 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
  41                 secmon_reserved: secmon@10000000 {
  42                         reg = <0x0 0x10000000 0x0 0x200000>;
  43                         no-map;
  44                 };
  45
  46                 /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
  47                 secmon_reserved_alt: secmon@5000000 {
  48                         reg = <0x0 0x05000000 0x0 0x300000>;
  49                         no-map;
  50                 };
  51
  52                 linux,cma {
  53                         compatible = "shared-dma-pool";
  54                         reusable;
  55                         size = <0x0 0x10000000>;
  56                         alignment = <0x0 0x400000>;
  57                         linux,cma-default;
  58                 };
  59         };
  60
  61         chosen {
  62                 #address-cells = <2>;
  63                 #size-cells = <2>;
  64                 ranges;
  65
  66                 simplefb_cvbs: framebuffer-cvbs {
  67                         compatible = "amlogic,simple-framebuffer",
  68                                      "simple-framebuffer";
  69                         amlogic,pipeline = "vpu-cvbs";
  70                         power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
  71                         status = "disabled";
  72                 };
  73
  74                 simplefb_hdmi: framebuffer-hdmi {
  75                         compatible = "amlogic,simple-framebuffer",
  76                                      "simple-framebuffer";
  77                         amlogic,pipeline = "vpu-hdmi";
  78                         power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
  79                         status = "disabled";
  80                 };
  81         };
  82
  83         cpus {
  84                 #address-cells = <0x2>;
  85                 #size-cells = <0x0>;
  86
  87                 cpu0: cpu@0 {
  88                         device_type = "cpu";
  89                         compatible = "arm,cortex-a53";
  90                         reg = <0x0 0x0>;
  91                         enable-method = "psci";
  92                         next-level-cache = <&l2>;
  93                         clocks = <&scpi_dvfs 0>;
  94                         #cooling-cells = <2>;
  95                 };
  96
  97                 cpu1: cpu@1 {
  98                         device_type = "cpu";
  99                         compatible = "arm,cortex-a53";
 100                         reg = <0x0 0x1>;
 101                         enable-method = "psci";
 102                         next-level-cache = <&l2>;
 103                         clocks = <&scpi_dvfs 0>;
 104                         #cooling-cells = <2>;
 105                 };
 106
 107                 cpu2: cpu@2 {
 108                         device_type = "cpu";
 109                         compatible = "arm,cortex-a53";
 110                         reg = <0x0 0x2>;
 111                         enable-method = "psci";
 112                         next-level-cache = <&l2>;
 113                         clocks = <&scpi_dvfs 0>;
 114                         #cooling-cells = <2>;
 115                 };
 116
 117                 cpu3: cpu@3 {
 118                         device_type = "cpu";
 119                         compatible = "arm,cortex-a53";
 120                         reg = <0x0 0x3>;
 121                         enable-method = "psci";
 122                         next-level-cache = <&l2>;
 123                         clocks = <&scpi_dvfs 0>;
 124                         #cooling-cells = <2>;
 125                 };
 126
 127                 l2: l2-cache0 {
 128                         compatible = "cache";
 129                 };
 130         };
 131
 132         thermal-zones {
 133                 cpu-thermal {
 134                         polling-delay-passive = <250>; /* milliseconds */
 135                         polling-delay = <1000>; /* milliseconds */
 136
 137                         thermal-sensors = <&scpi_sensors 0>;
 138
 139                         trips {
 140                                 cpu_passive: cpu-passive {
 141                                         temperature = <80000>; /* millicelsius */
 142                                         hysteresis = <2000>; /* millicelsius */
 143                                         type = "passive";
 144                                 };
 145
 146                                 cpu_hot: cpu-hot {
 147                                         temperature = <90000>; /* millicelsius */
 148                                         hysteresis = <2000>; /* millicelsius */
 149                                         type = "hot";
 150                                 };
 151
 152                                 cpu_critical: cpu-critical {
 153                                         temperature = <110000>; /* millicelsius */
 154                                         hysteresis = <2000>; /* millicelsius */
 155                                         type = "critical";
 156                                 };
 157                         };
 158
 159                         cpu_cooling_maps: cooling-maps {
 160                                 map0 {
 161                                         trip = <&cpu_passive>;
 162                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 163                                                          <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 164                                                          <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 165                                                          <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 166                                 };
 167
 168                                 map1 {
 169                                         trip = <&cpu_hot>;
 170                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 171                                                          <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 172                                                          <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 173                                                          <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 174                                 };
 175                         };
 176                 };
 177         };
 178
 179         arm-pmu {
 180                 compatible = "arm,cortex-a53-pmu";
 181                 interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 182                              <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 183                              <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 184                              <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 185                 interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 186         };
 187
 188         psci {
 189                 compatible = "arm,psci-0.2";
 190                 method = "smc";
 191         };
 192
 193         timer {
 194                 compatible = "arm,armv8-timer";
 195                 interrupts = <GIC_PPI 13
 196                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 197                              <GIC_PPI 14
 198                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 199                              <GIC_PPI 11
 200                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
 201                              <GIC_PPI 10
 202                         (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
 203         };
 204
 205         xtal: xtal-clk {
 206                 compatible = "fixed-clock";
 207                 clock-frequency = <24000000>;
 208                 clock-output-names = "xtal";
 209                 #clock-cells = <0>;
 210         };
 211
 212         firmware {
 213                 sm: secure-monitor {
 214                         compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
 215                 };
 216         };
 217
 218         efuse: efuse {
 219                 compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
 220                 #address-cells = <1>;
 221                 #size-cells = <1>;
 222                 read-only;
 223                 secure-monitor = <&sm>;
 224
 225                 sn: sn@14 {
 226                         reg = <0x14 0x10>;
 227                 };
 228
 229                 eth_mac: eth_mac@34 {
 230                         reg = <0x34 0x10>;
 231                 };
 232
 233                 bid: bid@46 {
 234                         reg = <0x46 0x30>;
 235                 };
 236         };
 237
 238         scpi {
 239                 compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
 240                 mboxes = <&mailbox 1 &mailbox 2>;
 241                 shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
 242
 243                 scpi_clocks: clocks {
 244                         compatible = "arm,scpi-clocks";
 245
 246                         scpi_dvfs: scpi_clocks@0 {
 247                                 compatible = "arm,scpi-dvfs-clocks";
 248                                 #clock-cells = <1>;
 249                                 clock-indices = <0>;
 250                                 clock-output-names = "vcpu";
 251                         };
 252                 };
 253
 254                 scpi_sensors: sensors {
 255                         compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 256                         #thermal-sensor-cells = <1>;
 257                 };
 258         };
 259
 260         soc {
 261                 compatible = "simple-bus";
 262                 #address-cells = <2>;
 263                 #size-cells = <2>;
 264                 ranges;
 265
 266                 cbus: bus@c1100000 {
 267                         compatible = "simple-bus";
 268                         reg = <0x0 0xc1100000 0x0 0x100000>;
 269                         #address-cells = <2>;
 270                         #size-cells = <2>;
 271                         ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 272
 273                         gpio_intc: interrupt-controller@9880 {
 274                                 compatible = "amlogic,meson-gpio-intc";
 275                                 reg = <0x0 0x9880 0x0 0x10>;
 276                                 interrupt-controller;
 277                                 #interrupt-cells = <2>;
 278                                 amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
 279                                 status = "disabled";
 280                         };
 281
 282                         reset: reset-controller@4404 {
 283                                 compatible = "amlogic,meson-gxbb-reset";
 284                                 reg = <0x0 0x04404 0x0 0x9c>;
 285                                 #reset-cells = <1>;
 286                         };
 287
 288                         aiu: audio-controller@5400 {
 289                                 compatible = "amlogic,aiu";
 290                                 #sound-dai-cells = <2>;
 291                                 sound-name-prefix = "AIU";
 292                                 reg = <0x0 0x5400 0x0 0x2ac>;
 293                                 interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>,
 294                                              <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
 295                                 interrupt-names = "i2s", "spdif";
 296                                 status = "disabled";
 297                         };
 298
 299                         uart_A: serial@84c0 {
 300                                 compatible = "amlogic,meson-gx-uart";
 301                                 reg = <0x0 0x84c0 0x0 0x18>;
 302                                 interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 303                                 status = "disabled";
 304                                 fifo-size = <128>;
 305                         };
 306
 307                         uart_B: serial@84dc {
 308                                 compatible = "amlogic,meson-gx-uart";
 309                                 reg = <0x0 0x84dc 0x0 0x18>;
 310                                 interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 311                                 status = "disabled";
 312                         };
 313
 314                         i2c_A: i2c@8500 {
 315                                 compatible = "amlogic,meson-gxbb-i2c";
 316                                 reg = <0x0 0x08500 0x0 0x20>;
 317                                 interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 318                                 #address-cells = <1>;
 319                                 #size-cells = <0>;
 320                                 status = "disabled";
 321                         };
 322
 323                         pwm_ab: pwm@8550 {
 324                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 325                                 reg = <0x0 0x08550 0x0 0x10>;
 326                                 #pwm-cells = <3>;
 327                                 status = "disabled";
 328                         };
 329
 330                         pwm_cd: pwm@8650 {
 331                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 332                                 reg = <0x0 0x08650 0x0 0x10>;
 333                                 #pwm-cells = <3>;
 334                                 status = "disabled";
 335                         };
 336
 337                         saradc: adc@8680 {
 338                                 compatible = "amlogic,meson-saradc";
 339                                 reg = <0x0 0x8680 0x0 0x34>;
 340                                 #io-channel-cells = <1>;
 341                                 interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 342                                 status = "disabled";
 343                         };
 344
 345                         pwm_ef: pwm@86c0 {
 346                                 compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 347                                 reg = <0x0 0x086c0 0x0 0x10>;
 348                                 #pwm-cells = <3>;
 349                                 status = "disabled";
 350                         };
 351
 352                         uart_C: serial@8700 {
 353                                 compatible = "amlogic,meson-gx-uart";
 354                                 reg = <0x0 0x8700 0x0 0x18>;
 355                                 interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 356                                 status = "disabled";
 357                         };
 358
 359                         clock-measure@8758 {
 360                                 compatible = "amlogic,meson-gx-clk-measure";
 361                                 reg = <0x0 0x8758 0x0 0x10>;
 362                         };
 363
 364                         i2c_B: i2c@87c0 {
 365                                 compatible = "amlogic,meson-gxbb-i2c";
 366                                 reg = <0x0 0x087c0 0x0 0x20>;
 367                                 interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
 368                                 #address-cells = <1>;
 369                                 #size-cells = <0>;
 370                                 status = "disabled";
 371                         };
 372
 373                         i2c_C: i2c@87e0 {
 374                                 compatible = "amlogic,meson-gxbb-i2c";
 375                                 reg = <0x0 0x087e0 0x0 0x20>;
 376                                 interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
 377                                 #address-cells = <1>;
 378                                 #size-cells = <0>;
 379                                 status = "disabled";
 380                         };
 381
 382                         spicc: spi@8d80 {
 383                                 compatible = "amlogic,meson-gx-spicc";
 384                                 reg = <0x0 0x08d80 0x0 0x80>;
 385                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 386                                 #address-cells = <1>;
 387                                 #size-cells = <0>;
 388                                 status = "disabled";
 389                         };
 390
 391                         spifc: spi@8c80 {
 392                                 compatible = "amlogic,meson-gxbb-spifc";
 393                                 reg = <0x0 0x08c80 0x0 0x80>;
 394                                 #address-cells = <1>;
 395                                 #size-cells = <0>;
 396                                 status = "disabled";
 397                         };
 398
 399                         watchdog@98d0 {
 400                                 compatible = "amlogic,meson-gxbb-wdt";
 401                                 reg = <0x0 0x098d0 0x0 0x10>;
 402                                 clocks = <&xtal>;
 403                         };
 404                 };
 405
 406                 gic: interrupt-controller@c4301000 {
 407                         compatible = "arm,gic-400";
 408                         reg = <0x0 0xc4301000 0 0x1000>,
 409                               <0x0 0xc4302000 0 0x2000>,
 410                               <0x0 0xc4304000 0 0x2000>,
 411                               <0x0 0xc4306000 0 0x2000>;
 412                         interrupt-controller;
 413                         interrupts = <GIC_PPI 9
 414                                 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
 415                         #interrupt-cells = <3>;
 416                         #address-cells = <0>;
 417                 };
 418
 419                 sram: sram@c8000000 {
 420                         compatible = "mmio-sram";
 421                         reg = <0x0 0xc8000000 0x0 0x14000>;
 422
 423                         #address-cells = <1>;
 424                         #size-cells = <1>;
 425                         ranges = <0 0x0 0xc8000000 0x14000>;
 426
 427                         cpu_scp_lpri: scp-sram@0 {
 428                                 compatible = "amlogic,meson-gxbb-scp-shmem";
 429                                 reg = <0x13000 0x400>;
 430                         };
 431
 432                         cpu_scp_hpri: scp-sram@200 {
 433                                 compatible = "amlogic,meson-gxbb-scp-shmem";
 434                                 reg = <0x13400 0x400>;
 435                         };
 436                 };
 437
 438                 aobus: bus@c8100000 {
 439                         compatible = "simple-bus";
 440                         reg = <0x0 0xc8100000 0x0 0x100000>;
 441                         #address-cells = <2>;
 442                         #size-cells = <2>;
 443                         ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
 444
 445                         sysctrl_AO: sys-ctrl@0 {
 446                                 compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 447                                 reg =  <0x0 0x0 0x0 0x100>;
 448
 449                                 clkc_AO: clock-controller {
 450                                         compatible = "amlogic,meson-gx-aoclkc";
 451                                         #clock-cells = <1>;
 452                                         #reset-cells = <1>;
 453                                 };
 454                         };
 455
 456                         cec_AO: cec@100 {
 457                                 compatible = "amlogic,meson-gx-ao-cec";
 458                                 reg = <0x0 0x00100 0x0 0x14>;
 459                                 interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
 460                                 status = "disabled";
 461                         };
 462
 463                         sec_AO: ao-secure@140 {
 464                                 compatible = "amlogic,meson-gx-ao-secure", "syscon";
 465                                 reg = <0x0 0x140 0x0 0x140>;
 466                                 amlogic,has-chip-id;
 467                         };
 468
 469                         uart_AO: serial@4c0 {
 470                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 471                                 reg = <0x0 0x004c0 0x0 0x18>;
 472                                 interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
 473                                 status = "disabled";
 474                         };
 475
 476                         uart_AO_B: serial@4e0 {
 477                                 compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
 478                                 reg = <0x0 0x004e0 0x0 0x18>;
 479                                 interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
 480                                 status = "disabled";
 481                         };
 482
 483                         i2c_AO: i2c@500 {
 484                                 compatible = "amlogic,meson-gxbb-i2c";
 485                                 reg = <0x0 0x500 0x0 0x20>;
 486                                 interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
 487                                 #address-cells = <1>;
 488                                 #size-cells = <0>;
 489                                 status = "disabled";
 490                         };
 491
 492                         pwm_AO_ab: pwm@550 {
 493                                 compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
 494                                 reg = <0x0 0x00550 0x0 0x10>;
 495                                 #pwm-cells = <3>;
 496                                 status = "disabled";
 497                         };
 498
 499                         ir: ir@580 {
 500                                 compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
 501                                 reg = <0x0 0x00580 0x0 0x40>;
 502                                 interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
 503                                 status = "disabled";
 504                         };
 505                 };
 506
 507                 vdec: video-codec@c8820000 {
 508                         compatible = "amlogic,gx-vdec";
 509                         reg = <0x0 0xc8820000 0x0 0x10000>,
 510                               <0x0 0xc110a580 0x0 0xe4>;
 511                         reg-names = "dos", "esparser";
 512
 513                         interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
 514                                      <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
 515                         interrupt-names = "vdec", "esparser";
 516
 517                         amlogic,ao-sysctrl = <&sysctrl_AO>;
 518                         amlogic,canvas = <&canvas>;
 519                 };
 520
 521                 periphs: bus@c8834000 {
 522                         compatible = "simple-bus";
 523                         reg = <0x0 0xc8834000 0x0 0x2000>;
 524                         #address-cells = <2>;
 525                         #size-cells = <2>;
 526                         ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
 527
 528                         hwrng: rng {
 529                                 compatible = "amlogic,meson-rng";
 530                                 reg = <0x0 0x0 0x0 0x4>;
 531                         };
 532                 };
 533
 534                 dmcbus: bus@c8838000 {
 535                         compatible = "simple-bus";
 536                         reg = <0x0 0xc8838000 0x0 0x400>;
 537                         #address-cells = <2>;
 538                         #size-cells = <2>;
 539                         ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
 540
 541                         canvas: video-lut@48 {
 542                                 compatible = "amlogic,canvas";
 543                                 reg = <0x0 0x48 0x0 0x14>;
 544                         };
 545                 };
 546
 547                 hiubus: bus@c883c000 {
 548                         compatible = "simple-bus";
 549                         reg = <0x0 0xc883c000 0x0 0x2000>;
 550                         #address-cells = <2>;
 551                         #size-cells = <2>;
 552                         ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
 553
 554                         sysctrl: system-controller@0 {
 555                                 compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 556                                 reg = <0 0 0 0x400>;
 557
 558                                 pwrc: power-controller {
 559                                         compatible = "amlogic,meson-gxbb-pwrc";
 560                                         #power-domain-cells = <1>;
 561                                         amlogic,ao-sysctrl = <&sysctrl_AO>;
 562                                 };
 563                         };
 564
 565                         mailbox: mailbox@404 {
 566                                 compatible = "amlogic,meson-gxbb-mhu";
 567                                 reg = <0 0x404 0 0x4c>;
 568                                 interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
 569                                              <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
 570                                              <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
 571                                 #mbox-cells = <1>;
 572                         };
 573                 };
 574
 575                 ethmac: ethernet@c9410000 {
 576                         compatible = "amlogic,meson-gxbb-dwmac",
 577                                      "snps,dwmac-3.70a",
 578                                      "snps,dwmac";
 579                         reg = <0x0 0xc9410000 0x0 0x10000>,
 580                               <0x0 0xc8834540 0x0 0x4>;
 581                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 582                         interrupt-names = "macirq";
 583                         rx-fifo-depth = <4096>;
 584                         tx-fifo-depth = <2048>;
 585                         power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 586                         status = "disabled";
 587                 };
 588
 589                 apb: apb@d0000000 {
 590                         compatible = "simple-bus";
 591                         reg = <0x0 0xd0000000 0x0 0x200000>;
 592                         #address-cells = <2>;
 593                         #size-cells = <2>;
 594                         ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
 595
 596                         sd_emmc_a: mmc@70000 {
 597                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 598                                 reg = <0x0 0x70000 0x0 0x800>;
 599                                 interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
 600                                 status = "disabled";
 601                         };
 602
 603                         sd_emmc_b: mmc@72000 {
 604                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 605                                 reg = <0x0 0x72000 0x0 0x800>;
 606                                 interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
 607                                 status = "disabled";
 608                         };
 609
 610                         sd_emmc_c: mmc@74000 {
 611                                 compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
 612                                 reg = <0x0 0x74000 0x0 0x800>;
 613                                 interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
 614                                 status = "disabled";
 615                         };
 616                 };
 617
 618                 vpu: vpu@d0100000 {
 619                         compatible = "amlogic,meson-gx-vpu";
 620                         reg = <0x0 0xd0100000 0x0 0x100000>,
 621                               <0x0 0xc883c000 0x0 0x1000>;
 622                         reg-names = "vpu", "hhi";
 623                         interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
 624                         #address-cells = <1>;
 625                         #size-cells = <0>;
 626                         amlogic,canvas = <&canvas>;
 627
 628                         /* CVBS VDAC output port */
 629                         cvbs_vdac_port: port@0 {
 630                                 reg = <0>;
 631                         };
 632
 633                         /* HDMI-TX output port */
 634                         hdmi_tx_port: port@1 {
 635                                 reg = <1>;
 636
 637                                 hdmi_tx_out: endpoint {
 638                                         remote-endpoint = <&hdmi_tx_in>;
 639                                 };
 640                         };
 641                 };
 642
 643                 hdmi_tx: hdmi-tx@c883a000 {
 644                         compatible = "amlogic,meson-gx-dw-hdmi";
 645                         reg = <0x0 0xc883a000 0x0 0x1c>;
 646                         interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
 647                         #address-cells = <1>;
 648                         #size-cells = <0>;
 649                         #sound-dai-cells = <0>;
 650                         sound-name-prefix = "HDMITX";
 651                         status = "disabled";
 652
 653                         /* VPU VENC Input */
 654                         hdmi_tx_venc_port: port@0 {
 655                                 reg = <0>;
 656
 657                                 hdmi_tx_in: endpoint {
 658                                         remote-endpoint = <&hdmi_tx_out>;
 659                                 };
 660                         };
 661
 662                         /* TMDS Output */
 663                         hdmi_tx_tmds_port: port@1 {
 664                                 reg = <1>;
 665                         };
 666                 };
 667         };
 668 };