arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
   3
   4 /dts-v1/;
   5
   6 #include "sun50i-h6.dtsi"
   7 #include "sun50i-h6-cpu-opp.dtsi"
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10
  11 / {
  12         model = "Tanix TX6";
  13         compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
  14
  15         aliases {
  16                 serial0 = &uart0;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         connector {
  24                 compatible = "hdmi-connector";
  25                 ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
  26                 type = "a";
  27
  28                 port {
  29                         hdmi_con_in: endpoint {
  30                                 remote-endpoint = <&hdmi_out_con>;
  31                         };
  32                 };
  33         };
  34
  35         reg_vcc3v3: vcc3v3 {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "vcc3v3";
  38                 regulator-min-microvolt = <3300000>;
  39                 regulator-max-microvolt = <3300000>;
  40         };
  41
  42         reg_vdd_cpu_gpu: vdd-cpu-gpu {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "vdd-cpu-gpu";
  45                 regulator-min-microvolt = <1135000>;
  46                 regulator-max-microvolt = <1135000>;
  47         };
  48 };
  49
  50 &cpu0 {
  51         cpu-supply = <&reg_vdd_cpu_gpu>;
  52 };
  53
  54 &de {
  55         status = "okay";
  56 };
  57
  58 &dwc3 {
  59         status = "okay";
  60 };
  61
  62 &ehci0 {
  63         status = "okay";
  64 };
  65
  66 &ehci3 {
  67         status = "okay";
  68 };
  69
  70 &gpu {
  71         mali-supply = <&reg_vdd_cpu_gpu>;
  72         status = "okay";
  73 };
  74
  75 &hdmi {
  76         status = "okay";
  77 };
  78
  79 &hdmi_out {
  80         hdmi_out_con: endpoint {
  81                 remote-endpoint = <&hdmi_con_in>;
  82         };
  83 };
  84
  85 &mmc0 {
  86         pinctrl-names = "default";
  87         pinctrl-0 = <&mmc0_pins>;
  88         vmmc-supply = <&reg_vcc3v3>;
  89         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
  90         bus-width = <4>;
  91         status = "okay";
  92 };
  93
  94 &ohci0 {
  95         status = "okay";
  96 };
  97
  98 &ohci3 {
  99         status = "okay";
 100 };
 101
 102 &r_ir {
 103         linux,rc-map-name = "rc-tanix-tx5max";
 104         status = "okay";
 105 };
 106
 107 &uart0 {
 108         pinctrl-names = "default";
 109         pinctrl-0 = <&uart0_ph_pins>;
 110         status = "okay";
 111 };
 112
 113 &usb2otg {
 114         dr_mode = "host";
 115         status = "okay";
 116 };
 117
 118 &usb2phy {
 119         status = "okay";
 120 };
 121
 122 &usb3phy {
 123         status = "okay";
 124 };