arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.xyz>
   3 // Based on sun50i-h5-orangepi-pc2.dts, which is:
   4 //   Copyright (C) 2016 ARM Ltd.
   5
   6 /dts-v1/;
   7 #include "sun50i-h5.dtsi"
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/input/input.h>
  11
  12 / {
  13         model = "Xunlong Orange Pi Prime";
  14         compatible = "xunlong,orangepi-prime", "allwinner,sun50i-h5";
  15
  16         aliases {
  17                 ethernet0 = &emac;
  18                 serial0 = &uart0;
  19         };
  20
  21         chosen {
  22                 stdout-path = "serial0:115200n8";
  23         };
  24
  25         connector {
  26                 compatible = "hdmi-connector";
  27                 type = "a";
  28
  29                 port {
  30                         hdmi_con_in: endpoint {
  31                                 remote-endpoint = <&hdmi_out_con>;
  32                         };
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led-0 {
  40                         label = "orangepi:green:pwr";
  41                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
  42                         default-state = "on";
  43                 };
  44
  45                 led-1 {
  46                         label = "orangepi:red:status";
  47                         gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
  48                 };
  49         };
  50
  51         r-gpio-keys {
  52                 compatible = "gpio-keys";
  53
  54                 sw4 {
  55                         label = "sw4";
  56                         linux,code = <BTN_0>;
  57                         gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         reg_gmac_3v3: gmac-3v3 {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "gmac-3v3";
  64                 regulator-min-microvolt = <3300000>;
  65                 regulator-max-microvolt = <3300000>;
  66                 startup-delay-us = <100000>;
  67                 enable-active-high;
  68                 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
  69         };
  70
  71         reg_vcc3v3: vcc3v3 {
  72                 compatible = "regulator-fixed";
  73                 regulator-name = "vcc3v3";
  74                 regulator-min-microvolt = <3300000>;
  75                 regulator-max-microvolt = <3300000>;
  76         };
  77
  78         reg_usb0_vbus: usb0-vbus {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "usb0-vbus";
  81                 regulator-min-microvolt = <5000000>;
  82                 regulator-max-microvolt = <5000000>;
  83                 enable-active-high;
  84                 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
  85                 status = "okay";
  86         };
  87
  88         wifi_pwrseq: wifi_pwrseq {
  89                 compatible = "mmc-pwrseq-simple";
  90                 reset-gpios = <&pio 2 14 GPIO_ACTIVE_LOW>; /* PC14 */
  91         };
  92 };
  93
  94 &codec {
  95         allwinner,audio-routing =
  96                 "Line Out", "LINEOUT",
  97                 "MIC1", "Mic",
  98                 "Mic",  "MBIAS";
  99         status = "okay";
 100 };
 101
 102 &de {
 103         status = "okay";
 104 };
 105
 106 &ehci0 {
 107         status = "okay";
 108 };
 109
 110 &ehci1 {
 111         status = "okay";
 112 };
 113
 114 &ehci2 {
 115         status = "okay";
 116 };
 117
 118 &ehci3 {
 119         status = "okay";
 120 };
 121
 122 &emac {
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&emac_rgmii_pins>;
 125         phy-supply = <&reg_gmac_3v3>;
 126         phy-handle = <&ext_rgmii_phy>;
 127         phy-mode = "rgmii-id";
 128         status = "okay";
 129 };
 130
 131 &external_mdio {
 132         ext_rgmii_phy: ethernet-phy@1 {
 133                 compatible = "ethernet-phy-ieee802.3-c22";
 134                 reg = <1>;
 135         };
 136 };
 137
 138 &hdmi {
 139         status = "okay";
 140 };
 141
 142 &hdmi_out {
 143         hdmi_out_con: endpoint {
 144                 remote-endpoint = <&hdmi_con_in>;
 145         };
 146 };
 147
 148 &ir {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&r_ir_rx_pin>;
 151         status = "okay";
 152 };
 153
 154 &mmc0 {
 155         vmmc-supply = <&reg_vcc3v3>;
 156         bus-width = <4>;
 157         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 158         status = "okay";
 159 };
 160
 161 &mmc1 {
 162         vmmc-supply = <&reg_vcc3v3>;
 163         mmc-pwrseq = <&wifi_pwrseq>;
 164         bus-width = <4>;
 165         non-removable;
 166         status = "okay";
 167 };
 168
 169 &ohci0 {
 170         status = "okay";
 171 };
 172
 173 &ohci1 {
 174         status = "okay";
 175 };
 176
 177 &ohci2 {
 178         status = "okay";
 179 };
 180
 181 &ohci3 {
 182         status = "okay";
 183 };
 184
 185 &uart0 {
 186         pinctrl-names = "default";
 187         pinctrl-0 = <&uart0_pa_pins>;
 188         status = "okay";
 189 };
 190
 191 &uart1 {
 192         pinctrl-names = "default";
 193         pinctrl-0 = <&uart1_pins>;
 194         status = "disabled";
 195 };
 196
 197 &uart2 {
 198         pinctrl-names = "default";
 199         pinctrl-0 = <&uart2_pins>;
 200         status = "disabled";
 201 };
 202
 203 &usb_otg {
 204         dr_mode = "otg";
 205         status = "okay";
 206 };
 207
 208 &usbphy {
 209         /* USB Type-A ports' VBUS is always on */
 210         usb0_id_det-gpios = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
 211         usb0_vbus-supply = <&reg_usb0_vbus>;
 212         status = "okay";
 213 };