arch/arm/mach-s3c/mach-bast.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 //
   3 // Copyright 2003-2008 Simtec Electronics
   4 //   Ben Dooks <ben@simtec.co.uk>
   5 //
   6 // http://www.simtec.co.uk/products/EB2410ITX/
   7
   8 #include <linux/kernel.h>
   9 #include <linux/types.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/list.h>
  12 #include <linux/timer.h>
  13 #include <linux/init.h>
  14 #include <linux/gpio.h>
  15 #include <linux/syscore_ops.h>
  16 #include <linux/serial_core.h>
  17 #include <linux/serial_s3c.h>
  18 #include <linux/platform_device.h>
  19 #include <linux/dm9000.h>
  20 #include <linux/ata_platform.h>
  21 #include <linux/i2c.h>
  22 #include <linux/io.h>
  23 #include <linux/serial_8250.h>
  24
  25 #include <linux/mtd/mtd.h>
  26 #include <linux/mtd/rawnand.h>
  27 #include <linux/mtd/nand-ecc-sw-hamming.h>
  28 #include <linux/mtd/partitions.h>
  29
  30 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
  31 #include <linux/platform_data/hwmon-s3c.h>
  32 #include <linux/platform_data/i2c-s3c2410.h>
  33 #include <linux/platform_data/mtd-nand-s3c2410.h>
  34
  35 #include <net/ax88796.h>
  36
  37 #include <asm/irq.h>
  38 #include <asm/mach/arch.h>
  39 #include <asm/mach/map.h>
  40 #include <asm/mach/irq.h>
  41 #include <asm/mach-types.h>
  42
  43 #include <linux/platform_data/fb-s3c2410.h>
  44 #include "regs-gpio.h"
  45 #include "gpio-samsung.h"
  46
  47 #include "cpu.h"
  48 #include <linux/soc/samsung/s3c-cpu-freq.h>
  49 #include "devs.h"
  50 #include "gpio-cfg.h"
  51
  52 #include "bast.h"
  53 #include "s3c24xx.h"
  54 #include "simtec.h"
  55
  56 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
  57
  58 /* macros for virtual address mods for the io space entries */
  59 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
  60 #define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
  61 #define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
  62 #define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)
  63
  64 /* macros to modify the physical addresses for io space */
  65
  66 #define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
  67 #define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
  68 #define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
  69 #define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))
  70
  71 static struct map_desc bast_iodesc[] __initdata = {
  72   /* ISA IO areas */
  73   {
  74           .virtual      = (u32)S3C24XX_VA_ISA_BYTE,
  75           .pfn          = PA_CS2(BAST_PA_ISAIO),
  76           .length       = SZ_16M,
  77           .type         = MT_DEVICE,
  78   }, {
  79           .virtual      = (u32)S3C24XX_VA_ISA_WORD,
  80           .pfn          = PA_CS3(BAST_PA_ISAIO),
  81           .length       = SZ_16M,
  82           .type         = MT_DEVICE,
  83   },
  84   /* bast CPLD control registers, and external interrupt controls */
  85   {
  86           .virtual      = (u32)BAST_VA_CTRL1,
  87           .pfn          = __phys_to_pfn(BAST_PA_CTRL1),
  88           .length       = SZ_1M,
  89           .type         = MT_DEVICE,
  90   }, {
  91           .virtual      = (u32)BAST_VA_CTRL2,
  92           .pfn          = __phys_to_pfn(BAST_PA_CTRL2),
  93           .length       = SZ_1M,
  94           .type         = MT_DEVICE,
  95   }, {
  96           .virtual      = (u32)BAST_VA_CTRL3,
  97           .pfn          = __phys_to_pfn(BAST_PA_CTRL3),
  98           .length       = SZ_1M,
  99           .type         = MT_DEVICE,
 100   }, {
 101           .virtual      = (u32)BAST_VA_CTRL4,
 102           .pfn          = __phys_to_pfn(BAST_PA_CTRL4),
 103           .length       = SZ_1M,
 104           .type         = MT_DEVICE,
 105   },
 106   /* PC104 IRQ mux */
 107   {
 108           .virtual      = (u32)BAST_VA_PC104_IRQREQ,
 109           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQREQ),
 110           .length       = SZ_1M,
 111           .type         = MT_DEVICE,
 112   }, {
 113           .virtual      = (u32)BAST_VA_PC104_IRQRAW,
 114           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQRAW),
 115           .length       = SZ_1M,
 116           .type         = MT_DEVICE,
 117   }, {
 118           .virtual      = (u32)BAST_VA_PC104_IRQMASK,
 119           .pfn          = __phys_to_pfn(BAST_PA_PC104_IRQMASK),
 120           .length       = SZ_1M,
 121           .type         = MT_DEVICE,
 122   },
 123
 124   /* peripheral space... one for each of fast/slow/byte/16bit */
 125   /* note, ide is only decoded in word space, even though some registers
 126    * are only 8bit */
 127
 128   /* slow, byte */
 129   { VA_C2(BAST_VA_ISAIO),   PA_CS2(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 130   { VA_C2(BAST_VA_ISAMEM),  PA_CS2(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 131   { VA_C2(BAST_VA_SUPERIO), PA_CS2(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 132
 133   /* slow, word */
 134   { VA_C3(BAST_VA_ISAIO),   PA_CS3(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 135   { VA_C3(BAST_VA_ISAMEM),  PA_CS3(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 136   { VA_C3(BAST_VA_SUPERIO), PA_CS3(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 137
 138   /* fast, byte */
 139   { VA_C4(BAST_VA_ISAIO),   PA_CS4(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 140   { VA_C4(BAST_VA_ISAMEM),  PA_CS4(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 141   { VA_C4(BAST_VA_SUPERIO), PA_CS4(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 142
 143   /* fast, word */
 144   { VA_C5(BAST_VA_ISAIO),   PA_CS5(BAST_PA_ISAIO),    SZ_16M, MT_DEVICE },
 145   { VA_C5(BAST_VA_ISAMEM),  PA_CS5(BAST_PA_ISAMEM),   SZ_16M, MT_DEVICE },
 146   { VA_C5(BAST_VA_SUPERIO), PA_CS5(BAST_PA_SUPERIO),  SZ_1M,  MT_DEVICE },
 147 };
 148
 149 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 150 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
 151 #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
 152
 153 static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 154         [0] = {
 155                 .hwport      = 0,
 156                 .flags       = 0,
 157                 .ucon        = UCON,
 158                 .ulcon       = ULCON,
 159                 .ufcon       = UFCON,
 160         },
 161         [1] = {
 162                 .hwport      = 1,
 163                 .flags       = 0,
 164                 .ucon        = UCON,
 165                 .ulcon       = ULCON,
 166                 .ufcon       = UFCON,
 167         },
 168         /* port 2 is not actually used */
 169         [2] = {
 170                 .hwport      = 2,
 171                 .flags       = 0,
 172                 .ucon        = UCON,
 173                 .ulcon       = ULCON,
 174                 .ufcon       = UFCON,
 175         }
 176 };
 177
 178 /* NAND Flash on BAST board */
 179
 180 #ifdef CONFIG_PM
 181 static int bast_pm_suspend(void)
 182 {
 183         /* ensure that an nRESET is not generated on resume. */
 184         gpio_direction_output(S3C2410_GPA(21), 1);
 185         return 0;
 186 }
 187
 188 static void bast_pm_resume(void)
 189 {
 190         s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 191 }
 192
 193 #else
 194 #define bast_pm_suspend NULL
 195 #define bast_pm_resume NULL
 196 #endif
 197
 198 static struct syscore_ops bast_pm_syscore_ops = {
 199         .suspend        = bast_pm_suspend,
 200         .resume         = bast_pm_resume,
 201 };
 202
 203 static int smartmedia_map[] = { 0 };
 204 static int chip0_map[] = { 1 };
 205 static int chip1_map[] = { 2 };
 206 static int chip2_map[] = { 3 };
 207
 208 static struct mtd_partition __initdata bast_default_nand_part[] = {
 209         [0] = {
 210                 .name   = "Boot Agent",
 211                 .size   = SZ_16K,
 212                 .offset = 0,
 213         },
 214         [1] = {
 215                 .name   = "/boot",
 216                 .size   = SZ_4M - SZ_16K,
 217                 .offset = SZ_16K,
 218         },
 219         [2] = {
 220                 .name   = "user",
 221                 .offset = SZ_4M,
 222                 .size   = MTDPART_SIZ_FULL,
 223         }
 224 };
 225
 226 /* the bast has 4 selectable slots for nand-flash, the three
 227  * on-board chip areas, as well as the external SmartMedia
 228  * slot.
 229  *
 230  * Note, there is no current hot-plug support for the SmartMedia
 231  * socket.
 232 */
 233
 234 static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 235         [0] = {
 236                 .name           = "SmartMedia",
 237                 .nr_chips       = 1,
 238                 .nr_map         = smartmedia_map,
 239                 .options        = NAND_SCAN_SILENT_NODEV,
 240                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 241                 .partitions     = bast_default_nand_part,
 242         },
 243         [1] = {
 244                 .name           = "chip0",
 245                 .nr_chips       = 1,
 246                 .nr_map         = chip0_map,
 247                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 248                 .partitions     = bast_default_nand_part,
 249         },
 250         [2] = {
 251                 .name           = "chip1",
 252                 .nr_chips       = 1,
 253                 .nr_map         = chip1_map,
 254                 .options        = NAND_SCAN_SILENT_NODEV,
 255                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 256                 .partitions     = bast_default_nand_part,
 257         },
 258         [3] = {
 259                 .name           = "chip2",
 260                 .nr_chips       = 1,
 261                 .nr_map         = chip2_map,
 262                 .options        = NAND_SCAN_SILENT_NODEV,
 263                 .nr_partitions  = ARRAY_SIZE(bast_default_nand_part),
 264                 .partitions     = bast_default_nand_part,
 265         }
 266 };
 267
 268 static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 269 {
 270         unsigned int tmp;
 271
 272         slot = set->nr_map[slot] & 3;
 273
 274         pr_debug("bast_nand: selecting slot %d (set %p,%p)\n",
 275                  slot, set, set->nr_map);
 276
 277         tmp = __raw_readb(BAST_VA_CTRL2);
 278         tmp &= BAST_CPLD_CTLR2_IDERST;
 279         tmp |= slot;
 280         tmp |= BAST_CPLD_CTRL2_WNAND;
 281
 282         pr_debug("bast_nand: ctrl2 now %02x\n", tmp);
 283
 284         __raw_writeb(tmp, BAST_VA_CTRL2);
 285 }
 286
 287 static struct s3c2410_platform_nand __initdata bast_nand_info = {
 288         .tacls          = 30,
 289         .twrph0         = 60,
 290         .twrph1         = 60,
 291         .nr_sets        = ARRAY_SIZE(bast_nand_sets),
 292         .sets           = bast_nand_sets,
 293         .select_chip    = bast_nand_select,
 294         .engine_type    = NAND_ECC_ENGINE_TYPE_SOFT,
 295 };
 296
 297 /* DM9000 */
 298
 299 static struct resource bast_dm9k_resource[] = {
 300         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
 301         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
 302         [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
 303                                         | IORESOURCE_IRQ_HIGHLEVEL),
 304 };
 305
 306 /* for the moment we limit ourselves to 16bit IO until some
 307  * better IO routines can be written and tested
 308 */
 309
 310 static struct dm9000_plat_data bast_dm9k_platdata = {
 311         .flags          = DM9000_PLATF_16BITONLY,
 312 };
 313
 314 static struct platform_device bast_device_dm9k = {
 315         .name           = "dm9000",
 316         .id             = 0,
 317         .num_resources  = ARRAY_SIZE(bast_dm9k_resource),
 318         .resource       = bast_dm9k_resource,
 319         .dev            = {
 320                 .platform_data = &bast_dm9k_platdata,
 321         }
 322 };
 323
 324 /* serial devices */
 325
 326 #define SERIAL_BASE  (S3C2410_CS2 + BAST_PA_SUPERIO)
 327 #define SERIAL_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SHARE_IRQ)
 328 #define SERIAL_CLK   (1843200)
 329
 330 static struct plat_serial8250_port bast_sio_data[] = {
 331         [0] = {
 332                 .mapbase        = SERIAL_BASE + 0x2f8,
 333                 .irq            = BAST_IRQ_PCSERIAL1,
 334                 .flags          = SERIAL_FLAGS,
 335                 .iotype         = UPIO_MEM,
 336                 .regshift       = 0,
 337                 .uartclk        = SERIAL_CLK,
 338         },
 339         [1] = {
 340                 .mapbase        = SERIAL_BASE + 0x3f8,
 341                 .irq            = BAST_IRQ_PCSERIAL2,
 342                 .flags          = SERIAL_FLAGS,
 343                 .iotype         = UPIO_MEM,
 344                 .regshift       = 0,
 345                 .uartclk        = SERIAL_CLK,
 346         },
 347         { }
 348 };
 349
 350 static struct platform_device bast_sio = {
 351         .name                   = "serial8250",
 352         .id                     = PLAT8250_DEV_PLATFORM,
 353         .dev                    = {
 354                 .platform_data  = &bast_sio_data,
 355         },
 356 };
 357
 358 /* we have devices on the bus which cannot work much over the
 359  * standard 100KHz i2c bus frequency
 360 */
 361
 362 static struct s3c2410_platform_i2c __initdata bast_i2c_info = {
 363         .flags          = 0,
 364         .slave_addr     = 0x10,
 365         .frequency      = 100*1000,
 366 };
 367
 368 /* Asix AX88796 10/100 ethernet controller */
 369
 370 static struct ax_plat_data bast_asix_platdata = {
 371         .flags          = AXFLG_MAC_FROMDEV,
 372         .wordlength     = 2,
 373         .dcr_val        = 0x48,
 374         .rcr_val        = 0x40,
 375 };
 376
 377 static struct resource bast_asix_resource[] = {
 378         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
 379         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
 380         [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
 381 };
 382
 383 static struct platform_device bast_device_asix = {
 384         .name           = "ax88796",
 385         .id             = 0,
 386         .num_resources  = ARRAY_SIZE(bast_asix_resource),
 387         .resource       = bast_asix_resource,
 388         .dev            = {
 389                 .platform_data = &bast_asix_platdata
 390         }
 391 };
 392
 393 /* Asix AX88796 10/100 ethernet controller parallel port */
 394
 395 static struct resource bast_asixpp_resource[] = {
 396         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x18 * 0x20), \
 397                                         0x30 * 0x20),
 398 };
 399
 400 static struct platform_device bast_device_axpp = {
 401         .name           = "ax88796-pp",
 402         .id             = 0,
 403         .num_resources  = ARRAY_SIZE(bast_asixpp_resource),
 404         .resource       = bast_asixpp_resource,
 405 };
 406
 407 /* LCD/VGA controller */
 408
 409 static struct s3c2410fb_display __initdata bast_lcd_info[] = {
 410         {
 411                 .type           = S3C2410_LCDCON1_TFT,
 412                 .width          = 640,
 413                 .height         = 480,
 414
 415                 .pixclock       = 33333,
 416                 .xres           = 640,
 417                 .yres           = 480,
 418                 .bpp            = 4,
 419                 .left_margin    = 40,
 420                 .right_margin   = 20,
 421                 .hsync_len      = 88,
 422                 .upper_margin   = 30,
 423                 .lower_margin   = 32,
 424                 .vsync_len      = 3,
 425
 426                 .lcdcon5        = 0x00014b02,
 427         },
 428         {
 429                 .type           = S3C2410_LCDCON1_TFT,
 430                 .width          = 640,
 431                 .height         = 480,
 432
 433                 .pixclock       = 33333,
 434                 .xres           = 640,
 435                 .yres           = 480,
 436                 .bpp            = 8,
 437                 .left_margin    = 40,
 438                 .right_margin   = 20,
 439                 .hsync_len      = 88,
 440                 .upper_margin   = 30,
 441                 .lower_margin   = 32,
 442                 .vsync_len      = 3,
 443
 444                 .lcdcon5        = 0x00014b02,
 445         },
 446         {
 447                 .type           = S3C2410_LCDCON1_TFT,
 448                 .width          = 640,
 449                 .height         = 480,
 450
 451                 .pixclock       = 33333,
 452                 .xres           = 640,
 453                 .yres           = 480,
 454                 .bpp            = 16,
 455                 .left_margin    = 40,
 456                 .right_margin   = 20,
 457                 .hsync_len      = 88,
 458                 .upper_margin   = 30,
 459                 .lower_margin   = 32,
 460                 .vsync_len      = 3,
 461
 462                 .lcdcon5        = 0x00014b02,
 463         },
 464 };
 465
 466 /* LCD/VGA controller */
 467
 468 static struct s3c2410fb_mach_info __initdata bast_fb_info = {
 469
 470         .displays = bast_lcd_info,
 471         .num_displays = ARRAY_SIZE(bast_lcd_info),
 472         .default_display = 1,
 473 };
 474
 475 /* I2C devices fitted. */
 476
 477 static struct i2c_board_info bast_i2c_devs[] __initdata = {
 478         {
 479                 I2C_BOARD_INFO("tlv320aic23", 0x1a),
 480         }, {
 481                 I2C_BOARD_INFO("simtec-pmu", 0x6b),
 482         }, {
 483                 I2C_BOARD_INFO("ch7013", 0x75),
 484         },
 485 };
 486
 487 static struct s3c_hwmon_pdata bast_hwmon_info = {
 488         /* LCD contrast (0-6.6V) */
 489         .in[0] = &(struct s3c_hwmon_chcfg) {
 490                 .name           = "lcd-contrast",
 491                 .mult           = 3300,
 492                 .div            = 512,
 493         },
 494         /* LED current feedback */
 495         .in[1] = &(struct s3c_hwmon_chcfg) {
 496                 .name           = "led-feedback",
 497                 .mult           = 3300,
 498                 .div            = 1024,
 499         },
 500         /* LCD feedback (0-6.6V) */
 501         .in[2] = &(struct s3c_hwmon_chcfg) {
 502                 .name           = "lcd-feedback",
 503                 .mult           = 3300,
 504                 .div            = 512,
 505         },
 506         /* Vcore (1.8-2.0V), Vref 3.3V  */
 507         .in[3] = &(struct s3c_hwmon_chcfg) {
 508                 .name           = "vcore",
 509                 .mult           = 3300,
 510                 .div            = 1024,
 511         },
 512 };
 513
 514 /* Standard BAST devices */
 515 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 516
 517 static struct platform_device *bast_devices[] __initdata = {
 518         &s3c2410_device_dclk,
 519         &s3c_device_ohci,
 520         &s3c_device_lcd,
 521         &s3c_device_wdt,
 522         &s3c_device_i2c0,
 523         &s3c_device_rtc,
 524         &s3c_device_nand,
 525         &s3c_device_adc,
 526         &s3c_device_hwmon,
 527         &bast_device_dm9k,
 528         &bast_device_asix,
 529         &bast_device_axpp,
 530         &bast_sio,
 531 };
 532
 533 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 534         .refresh        = 7800, /* 7.8usec */
 535         .auto_io        = 1,
 536         .need_io        = 1,
 537 };
 538
 539 static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 540         .have_mic       = 1,
 541         .have_lout      = 1,
 542 };
 543
 544 static void __init bast_map_io(void)
 545 {
 546         s3c_hwmon_set_platdata(&bast_hwmon_info);
 547
 548         s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 549         s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 550         s3c24xx_set_timer_source(S3C24XX_PWM3, S3C24XX_PWM4);
 551 }
 552
 553 static void __init bast_init_time(void)
 554 {
 555         s3c2410_init_clocks(12000000);
 556         s3c24xx_timer_init();
 557 }
 558
 559 static void __init bast_init(void)
 560 {
 561         register_syscore_ops(&bast_pm_syscore_ops);
 562
 563         s3c_i2c0_set_platdata(&bast_i2c_info);
 564         s3c_nand_set_platdata(&bast_nand_info);
 565         s3c24xx_fb_set_platdata(&bast_fb_info);
 566         platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 567
 568         i2c_register_board_info(0, bast_i2c_devs,
 569                                 ARRAY_SIZE(bast_i2c_devs));
 570
 571         usb_simtec_init();
 572         nor_simtec_init();
 573         simtec_audio_add(NULL, true, &bast_audio);
 574
 575         WARN_ON(gpio_request(S3C2410_GPA(21), "bast nreset"));
 576
 577         s3c_cpufreq_setboard(&bast_cpufreq);
 578 }
 579
 580 MACHINE_START(BAST, "Simtec-BAST")
 581         /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
 582         .atag_offset    = 0x100,
 583         .map_io         = bast_map_io,
 584         .init_irq       = s3c2410_init_irq,
 585         .init_machine   = bast_init,
 586         .init_time      = bast_init_time,
 587 MACHINE_END