Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
[linux-2.6-microblaze.git] / arch / arm / mach-pxa / lubbock.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  linux/arch/arm/mach-pxa/lubbock.c
4  *
5  *  Support for the Intel DBPXA250 Development Platform.
6  *
7  *  Author:     Nicolas Pitre
8  *  Created:    Jun 15, 2001
9  *  Copyright:  MontaVista Software Inc.
10  */
11 #include <linux/clkdev.h>
12 #include <linux/gpio.h>
13 #include <linux/gpio/gpio-reg.h>
14 #include <linux/gpio/machine.h>
15 #include <linux/module.h>
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/io.h>
19 #include <linux/platform_device.h>
20 #include <linux/syscore_ops.h>
21 #include <linux/major.h>
22 #include <linux/fb.h>
23 #include <linux/interrupt.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26 #include <linux/smc91x.h>
27 #include <linux/slab.h>
28 #include <linux/leds.h>
29
30 #include <linux/spi/spi.h>
31 #include <linux/spi/ads7846.h>
32 #include <linux/spi/pxa2xx_spi.h>
33
34 #include <asm/setup.h>
35 #include <asm/memory.h>
36 #include <asm/mach-types.h>
37 #include <mach/hardware.h>
38 #include <asm/irq.h>
39 #include <linux/sizes.h>
40
41 #include <asm/mach/arch.h>
42 #include <asm/mach/map.h>
43 #include <asm/mach/irq.h>
44 #include <asm/mach/flash.h>
45
46 #include <asm/hardware/sa1111.h>
47
48 #include "pxa25x.h"
49 #include <mach/audio.h>
50 #include <mach/lubbock.h>
51 #include "udc.h"
52 #include <linux/platform_data/irda-pxaficp.h>
53 #include <linux/platform_data/video-pxafb.h>
54 #include <linux/platform_data/mmc-pxamci.h>
55 #include "pm.h"
56 #include <mach/smemc.h>
57
58 #include "generic.h"
59 #include "devices.h"
60
61 static unsigned long lubbock_pin_config[] __initdata = {
62         GPIO15_nCS_1,   /* CS1 - Flash */
63         GPIO78_nCS_2,   /* CS2 - Baseboard FGPA */
64         GPIO79_nCS_3,   /* CS3 - SMC ethernet */
65         GPIO80_nCS_4,   /* CS4 - SA1111 */
66
67         /* SSP data pins */
68         GPIO23_SSP1_SCLK,
69         GPIO25_SSP1_TXD,
70         GPIO26_SSP1_RXD,
71
72         /* AC97 */
73         GPIO28_AC97_BITCLK,
74         GPIO29_AC97_SDATA_IN_0,
75         GPIO30_AC97_SDATA_OUT,
76         GPIO31_AC97_SYNC,
77
78         /* LCD - 16bpp DSTN */
79         GPIOxx_LCD_DSTN_16BPP,
80
81         /* BTUART */
82         GPIO42_BTUART_RXD,
83         GPIO43_BTUART_TXD,
84         GPIO44_BTUART_CTS,
85         GPIO45_BTUART_RTS,
86
87         /* PC Card */
88         GPIO48_nPOE,
89         GPIO49_nPWE,
90         GPIO50_nPIOR,
91         GPIO51_nPIOW,
92         GPIO52_nPCE_1,
93         GPIO53_nPCE_2,
94         GPIO54_nPSKTSEL,
95         GPIO55_nPREG,
96         GPIO56_nPWAIT,
97         GPIO57_nIOIS16,
98
99         /* MMC */
100         GPIO6_MMC_CLK,
101         GPIO8_MMC_CS0,
102
103         /* SA1111 chip */
104         GPIO11_3_6MHz,
105
106         /* wakeup */
107         GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
108 };
109
110 #define LUB_HEXLED              __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
111
112 void lubbock_set_hexled(uint32_t value)
113 {
114         LUB_HEXLED = value;
115 }
116
117 static struct gpio_chip *lubbock_misc_wr_gc;
118
119 static void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
120 {
121         unsigned long m = mask, v = set;
122         lubbock_misc_wr_gc->set_multiple(lubbock_misc_wr_gc, &m, &v);
123 }
124
125 static int lubbock_udc_is_connected(void)
126 {
127         return (LUB_MISC_RD & (1 << 9)) == 0;
128 }
129
130 static struct pxa2xx_udc_mach_info udc_info __initdata = {
131         .udc_is_connected       = lubbock_udc_is_connected,
132         // no D+ pullup; lubbock can't connect/disconnect in software
133 };
134
135 /* GPIOs for SA1111 PCMCIA */
136 static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = {
137         .dev_id = "1800",
138         .table = {
139                 { "sa1111", 0, "a0vpp", GPIO_ACTIVE_HIGH },
140                 { "sa1111", 1, "a1vpp", GPIO_ACTIVE_HIGH },
141                 { "sa1111", 2, "a0vcc", GPIO_ACTIVE_HIGH },
142                 { "sa1111", 3, "a1vcc", GPIO_ACTIVE_HIGH },
143                 { "lubbock", 14, "b0vcc", GPIO_ACTIVE_HIGH },
144                 { "lubbock", 15, "b1vcc", GPIO_ACTIVE_HIGH },
145                 { },
146         },
147 };
148
149 static void lubbock_init_pcmcia(void)
150 {
151         struct clk *clk;
152
153         gpiod_add_lookup_table(&sa1111_pcmcia_gpio_table);
154
155         /* Add an alias for the SA1111 PCMCIA clock */
156         clk = clk_get_sys("pxa2xx-pcmcia", NULL);
157         if (!IS_ERR(clk)) {
158                 clkdev_create(clk, NULL, "1800");
159                 clk_put(clk);
160         }
161 }
162
163 static struct resource sa1111_resources[] = {
164         [0] = {
165                 .start  = 0x10000000,
166                 .end    = 0x10001fff,
167                 .flags  = IORESOURCE_MEM,
168         },
169         [1] = {
170                 .start  = LUBBOCK_SA1111_IRQ,
171                 .end    = LUBBOCK_SA1111_IRQ,
172                 .flags  = IORESOURCE_IRQ,
173         },
174 };
175
176 static struct sa1111_platform_data sa1111_info = {
177         .irq_base       = LUBBOCK_SA1111_IRQ_BASE,
178         .disable_devs   = SA1111_DEVID_SAC,
179 };
180
181 static struct platform_device sa1111_device = {
182         .name           = "sa1111",
183         .id             = -1,
184         .num_resources  = ARRAY_SIZE(sa1111_resources),
185         .resource       = sa1111_resources,
186         .dev            = {
187                 .platform_data  = &sa1111_info,
188         },
189 };
190
191 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
192  * you can select it to replace the ucb1400 by switching the touchscreen cable
193  * (to J5) and poking board registers (as done below).  Else it's only useful
194  * for the temperature sensors.
195  */
196 static struct pxa2xx_spi_controller pxa_ssp_master_info = {
197         .num_chipselect = 1,
198 };
199
200 static int lubbock_ads7846_pendown_state(void)
201 {
202         /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
203         return 0;
204 }
205
206 static struct ads7846_platform_data ads_info = {
207         .model                  = 7846,
208         .vref_delay_usecs       = 100,          /* internal, no cap */
209         .get_pendown_state      = lubbock_ads7846_pendown_state,
210         // .x_plate_ohms                = 500,  /* GUESS! */
211         // .y_plate_ohms                = 500,  /* GUESS! */
212 };
213
214 static void ads7846_cs(u32 command)
215 {
216         static const unsigned   TS_nCS = 1 << 11;
217         lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
218 }
219
220 static struct pxa2xx_spi_chip ads_hw = {
221         .tx_threshold           = 1,
222         .rx_threshold           = 2,
223         .cs_control             = ads7846_cs,
224 };
225
226 static struct spi_board_info spi_board_info[] __initdata = { {
227         .modalias       = "ads7846",
228         .platform_data  = &ads_info,
229         .controller_data = &ads_hw,
230         .irq            = LUBBOCK_BB_IRQ,
231         .max_speed_hz   = 120000 /* max sample rate at 3V */
232                                 * 26 /* command + data + overhead */,
233         .bus_num        = 1,
234         .chip_select    = 0,
235 },
236 };
237
238 static struct resource smc91x_resources[] = {
239         [0] = {
240                 .name   = "smc91x-regs",
241                 .start  = 0x0c000c00,
242                 .end    = 0x0c0fffff,
243                 .flags  = IORESOURCE_MEM,
244         },
245         [1] = {
246                 .start  = LUBBOCK_ETH_IRQ,
247                 .end    = LUBBOCK_ETH_IRQ,
248                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
249         },
250         [2] = {
251                 .name   = "smc91x-attrib",
252                 .start  = 0x0e000000,
253                 .end    = 0x0e0fffff,
254                 .flags  = IORESOURCE_MEM,
255         },
256 };
257
258 static struct smc91x_platdata lubbock_smc91x_info = {
259         .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
260 };
261
262 static struct platform_device smc91x_device = {
263         .name           = "smc91x",
264         .id             = -1,
265         .num_resources  = ARRAY_SIZE(smc91x_resources),
266         .resource       = smc91x_resources,
267         .dev            = {
268                 .platform_data = &lubbock_smc91x_info,
269         },
270 };
271
272 static struct resource flash_resources[] = {
273         [0] = {
274                 .start  = 0x00000000,
275                 .end    = SZ_64M - 1,
276                 .flags  = IORESOURCE_MEM,
277         },
278         [1] = {
279                 .start  = 0x04000000,
280                 .end    = 0x04000000 + SZ_64M - 1,
281                 .flags  = IORESOURCE_MEM,
282         },
283 };
284
285 static struct mtd_partition lubbock_partitions[] = {
286         {
287                 .name =         "Bootloader",
288                 .size =         0x00040000,
289                 .offset =       0,
290                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
291         },{
292                 .name =         "Kernel",
293                 .size =         0x00100000,
294                 .offset =       0x00040000,
295         },{
296                 .name =         "Filesystem",
297                 .size =         MTDPART_SIZ_FULL,
298                 .offset =       0x00140000
299         }
300 };
301
302 static struct flash_platform_data lubbock_flash_data[2] = {
303         {
304                 .map_name       = "cfi_probe",
305                 .parts          = lubbock_partitions,
306                 .nr_parts       = ARRAY_SIZE(lubbock_partitions),
307         }, {
308                 .map_name       = "cfi_probe",
309                 .parts          = NULL,
310                 .nr_parts       = 0,
311         }
312 };
313
314 static struct platform_device lubbock_flash_device[2] = {
315         {
316                 .name           = "pxa2xx-flash",
317                 .id             = 0,
318                 .dev = {
319                         .platform_data = &lubbock_flash_data[0],
320                 },
321                 .resource = &flash_resources[0],
322                 .num_resources = 1,
323         },
324         {
325                 .name           = "pxa2xx-flash",
326                 .id             = 1,
327                 .dev = {
328                         .platform_data = &lubbock_flash_data[1],
329                 },
330                 .resource = &flash_resources[1],
331                 .num_resources = 1,
332         },
333 };
334
335 static struct resource lubbock_cplds_resources[] = {
336         [0] = {
337                 .start  = LUBBOCK_FPGA_PHYS + 0xc0,
338                 .end    = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
339                 .flags  = IORESOURCE_MEM,
340         },
341         [1] = {
342                 .start  = PXA_GPIO_TO_IRQ(0),
343                 .end    = PXA_GPIO_TO_IRQ(0),
344                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
345         },
346         [2] = {
347                 .start  = LUBBOCK_IRQ(0),
348                 .end    = LUBBOCK_IRQ(6),
349                 .flags  = IORESOURCE_IRQ,
350         },
351 };
352
353 static struct platform_device lubbock_cplds_device = {
354         .name           = "pxa_cplds_irqs",
355         .id             = -1,
356         .resource       = &lubbock_cplds_resources[0],
357         .num_resources  = 3,
358 };
359
360
361 static struct platform_device *devices[] __initdata = {
362         &sa1111_device,
363         &smc91x_device,
364         &lubbock_flash_device[0],
365         &lubbock_flash_device[1],
366         &lubbock_cplds_device,
367 };
368
369 static struct pxafb_mode_info sharp_lm8v31_mode = {
370         .pixclock       = 270000,
371         .xres           = 640,
372         .yres           = 480,
373         .bpp            = 16,
374         .hsync_len      = 1,
375         .left_margin    = 3,
376         .right_margin   = 3,
377         .vsync_len      = 1,
378         .upper_margin   = 0,
379         .lower_margin   = 0,
380         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
381         .cmap_greyscale = 0,
382 };
383
384 static struct pxafb_mach_info sharp_lm8v31 = {
385         .modes          = &sharp_lm8v31_mode,
386         .num_modes      = 1,
387         .cmap_inverse   = 0,
388         .cmap_static    = 0,
389         .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
390                           LCD_AC_BIAS_FREQ(255),
391 };
392
393 #define MMC_POLL_RATE           msecs_to_jiffies(1000)
394
395 static irq_handler_t mmc_detect_int;
396 static void *mmc_detect_int_data;
397 static struct timer_list mmc_timer;
398
399 static void lubbock_mmc_poll(struct timer_list *unused)
400 {
401         unsigned long flags;
402
403         /* clear any previous irq state, then ... */
404         local_irq_save(flags);
405         LUB_IRQ_SET_CLR &= ~(1 << 0);
406         local_irq_restore(flags);
407
408         /* poll until mmc/sd card is removed */
409         if (LUB_IRQ_SET_CLR & (1 << 0))
410                 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
411         else {
412                 (void) mmc_detect_int(LUBBOCK_SD_IRQ, mmc_detect_int_data);
413                 enable_irq(LUBBOCK_SD_IRQ);
414         }
415 }
416
417 static irqreturn_t lubbock_detect_int(int irq, void *data)
418 {
419         /* IRQ is level triggered; disable, and poll for removal */
420         disable_irq(irq);
421         mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
422
423         return mmc_detect_int(irq, data);
424 }
425
426 static int lubbock_mci_init(struct device *dev,
427                 irq_handler_t detect_int,
428                 void *data)
429 {
430         /* detect card insert/eject */
431         mmc_detect_int = detect_int;
432         mmc_detect_int_data = data;
433         timer_setup(&mmc_timer, lubbock_mmc_poll, 0);
434         return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
435                            0, "lubbock-sd-detect", data);
436 }
437
438 static int lubbock_mci_get_ro(struct device *dev)
439 {
440         return (LUB_MISC_RD & (1 << 2)) != 0;
441 }
442
443 static void lubbock_mci_exit(struct device *dev, void *data)
444 {
445         free_irq(LUBBOCK_SD_IRQ, data);
446         del_timer_sync(&mmc_timer);
447 }
448
449 static struct pxamci_platform_data lubbock_mci_platform_data = {
450         .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
451         .detect_delay_ms        = 10,
452         .init                   = lubbock_mci_init,
453         .get_ro                 = lubbock_mci_get_ro,
454         .exit                   = lubbock_mci_exit,
455 };
456
457 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
458 {
459         unsigned long flags;
460
461         local_irq_save(flags);
462         if (mode & IR_SIRMODE) {
463                 lubbock_set_misc_wr(BIT(4), 0);
464         } else if (mode & IR_FIRMODE) {
465                 lubbock_set_misc_wr(BIT(4), BIT(4));
466         }
467         pxa2xx_transceiver_mode(dev, mode);
468         local_irq_restore(flags);
469 }
470
471 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
472         .gpio_pwdown            = -1,
473         .transceiver_cap        = IR_SIRMODE | IR_FIRMODE,
474         .transceiver_mode       = lubbock_irda_transceiver_mode,
475 };
476
477 static void __init lubbock_init(void)
478 {
479         int flashboot = (LUB_CONF_SWITCHES & 1);
480
481         pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
482
483         lubbock_misc_wr_gc = gpio_reg_init(NULL, (void *)&LUB_MISC_WR,
484                                            -1, 16, "lubbock", 0, LUB_MISC_WR,
485                                            NULL, NULL, NULL);
486         if (IS_ERR(lubbock_misc_wr_gc)) {
487                 pr_err("Lubbock: unable to register lubbock GPIOs: %ld\n",
488                        PTR_ERR(lubbock_misc_wr_gc));
489                 lubbock_misc_wr_gc = NULL;
490         }
491
492         pxa_set_ffuart_info(NULL);
493         pxa_set_btuart_info(NULL);
494         pxa_set_stuart_info(NULL);
495
496         lubbock_init_pcmcia();
497
498         clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
499         pxa_set_udc_info(&udc_info);
500         pxa_set_fb_info(NULL, &sharp_lm8v31);
501         pxa_set_mci_info(&lubbock_mci_platform_data);
502         pxa_set_ficp_info(&lubbock_ficp_platform_data);
503         pxa_set_ac97_info(NULL);
504
505         lubbock_flash_data[0].width = lubbock_flash_data[1].width =
506                 (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
507         /* Compensate for the nROMBT switch which swaps the flash banks */
508         printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
509                flashboot?"Flash":"ROM", flashboot);
510
511         lubbock_flash_data[flashboot^1].name = "application-flash";
512         lubbock_flash_data[flashboot].name = "boot-rom";
513         (void) platform_add_devices(devices, ARRAY_SIZE(devices));
514
515         pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
516         spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
517 }
518
519 static struct map_desc lubbock_io_desc[] __initdata = {
520         {       /* CPLD */
521                 .virtual        =  LUBBOCK_FPGA_VIRT,
522                 .pfn            = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
523                 .length         = 0x00100000,
524                 .type           = MT_DEVICE
525         }
526 };
527
528 static void __init lubbock_map_io(void)
529 {
530         pxa25x_map_io();
531         iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
532
533         PCFR |= PCFR_OPDE;
534 }
535
536 /*
537  * Driver for the 8 discrete LEDs available for general use:
538  * Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
539  * so be sure to not monkey with them here.
540  */
541
542 #if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
543 struct lubbock_led {
544         struct led_classdev     cdev;
545         u8                      mask;
546 };
547
548 /*
549  * The triggers lines up below will only be used if the
550  * LED triggers are compiled in.
551  */
552 static const struct {
553         const char *name;
554         const char *trigger;
555 } lubbock_leds[] = {
556         { "lubbock:D28", "default-on", },
557         { "lubbock:D27", "cpu0", },
558         { "lubbock:D26", "heartbeat" },
559         { "lubbock:D25", },
560         { "lubbock:D24", },
561         { "lubbock:D23", },
562         { "lubbock:D22", },
563         { "lubbock:D21", },
564 };
565
566 static void lubbock_led_set(struct led_classdev *cdev,
567                               enum led_brightness b)
568 {
569         struct lubbock_led *led = container_of(cdev,
570                                          struct lubbock_led, cdev);
571         u32 reg = LUB_DISC_BLNK_LED;
572
573         if (b != LED_OFF)
574                 reg |= led->mask;
575         else
576                 reg &= ~led->mask;
577
578         LUB_DISC_BLNK_LED = reg;
579 }
580
581 static enum led_brightness lubbock_led_get(struct led_classdev *cdev)
582 {
583         struct lubbock_led *led = container_of(cdev,
584                                          struct lubbock_led, cdev);
585         u32 reg = LUB_DISC_BLNK_LED;
586
587         return (reg & led->mask) ? LED_FULL : LED_OFF;
588 }
589
590 static int __init lubbock_leds_init(void)
591 {
592         int i;
593
594         if (!machine_is_lubbock())
595                 return -ENODEV;
596
597         /* All ON */
598         LUB_DISC_BLNK_LED |= 0xff;
599         for (i = 0; i < ARRAY_SIZE(lubbock_leds); i++) {
600                 struct lubbock_led *led;
601
602                 led = kzalloc(sizeof(*led), GFP_KERNEL);
603                 if (!led)
604                         break;
605
606                 led->cdev.name = lubbock_leds[i].name;
607                 led->cdev.brightness_set = lubbock_led_set;
608                 led->cdev.brightness_get = lubbock_led_get;
609                 led->cdev.default_trigger = lubbock_leds[i].trigger;
610                 led->mask = BIT(i);
611
612                 if (led_classdev_register(NULL, &led->cdev) < 0) {
613                         kfree(led);
614                         break;
615                 }
616         }
617
618         return 0;
619 }
620
621 /*
622  * Since we may have triggers on any subsystem, defer registration
623  * until after subsystem_init.
624  */
625 fs_initcall(lubbock_leds_init);
626 #endif
627
628 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
629         /* Maintainer: MontaVista Software Inc. */
630         .map_io         = lubbock_map_io,
631         .nr_irqs        = LUBBOCK_NR_IRQS,
632         .init_irq       = pxa25x_init_irq,
633         .handle_irq     = pxa25x_handle_irq,
634         .init_time      = pxa_timer_init,
635         .init_machine   = lubbock_init,
636         .restart        = pxa_restart,
637 MACHINE_END