arch/arm/boot/dts/stih407-family.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (C) 2014 STMicroelectronics Limited.
   4  * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   5  */
   6 #include "stih407-pinctrl.dtsi"
   7 #include <dt-bindings/mfd/st-lpc.h>
   8 #include <dt-bindings/phy/phy.h>
   9 #include <dt-bindings/reset/stih407-resets.h>
  10 #include <dt-bindings/interrupt-controller/irq-st.h>
  11 / {
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14
  15         reserved-memory {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 ranges;
  19
  20                 gp0_reserved: rproc@45000000 {
  21                         compatible = "shared-dma-pool";
  22                         reg = <0x45000000 0x00400000>;
  23                         no-map;
  24                 };
  25
  26                 delta_reserved: rproc@44000000 {
  27                         compatible = "shared-dma-pool";
  28                         reg = <0x44000000 0x01000000>;
  29                         no-map;
  30                 };
  31         };
  32
  33         cpus {
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 cpu@0 {
  37                         device_type = "cpu";
  38                         compatible = "arm,cortex-a9";
  39                         reg = <0>;
  40
  41                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  42                         cpu-release-addr = <0x94100A4>;
  43
  44                                          /* kHz     uV   */
  45                         operating-points = <1500000 0
  46                                             1200000 0
  47                                             800000  0
  48                                             500000  0>;
  49
  50                         clocks = <&clk_m_a9>;
  51                         clock-names = "cpu";
  52                         clock-latency = <100000>;
  53                         cpu0-supply = <&pwm_regulator>;
  54                         st,syscfg = <&syscfg_core 0x8e0>;
  55                 };
  56                 cpu@1 {
  57                         device_type = "cpu";
  58                         compatible = "arm,cortex-a9";
  59                         reg = <1>;
  60
  61                         /* u-boot puts hpen in SBC dmem at 0xa4 offset */
  62                         cpu-release-addr = <0x94100A4>;
  63
  64                                          /* kHz     uV   */
  65                         operating-points = <1500000 0
  66                                             1200000 0
  67                                             800000  0
  68                                             500000  0>;
  69                 };
  70         };
  71
  72         intc: interrupt-controller@8761000 {
  73                 compatible = "arm,cortex-a9-gic";
  74                 #interrupt-cells = <3>;
  75                 interrupt-controller;
  76                 reg = <0x08761000 0x1000>, <0x08760100 0x100>;
  77         };
  78
  79         scu@8760000 {
  80                 compatible = "arm,cortex-a9-scu";
  81                 reg = <0x08760000 0x1000>;
  82         };
  83
  84         timer@8760200 {
  85                 interrupt-parent = <&intc>;
  86                 compatible = "arm,cortex-a9-global-timer";
  87                 reg = <0x08760200 0x100>;
  88                 interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
  89                 clocks = <&arm_periph_clk>;
  90         };
  91
  92         l2: cache-controller@8762000 {
  93                 compatible = "arm,pl310-cache";
  94                 reg = <0x08762000 0x1000>;
  95                 arm,data-latency = <3 3 3>;
  96                 arm,tag-latency = <2 2 2>;
  97                 cache-unified;
  98                 cache-level = <2>;
  99         };
 100
 101         arm-pmu {
 102                 interrupt-parent = <&intc>;
 103                 compatible = "arm,cortex-a9-pmu";
 104                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 105         };
 106
 107         pwm_regulator: pwm-regulator {
 108                 compatible = "pwm-regulator";
 109                 pwms = <&pwm1 3 8448>;
 110                 regulator-name = "CPU_1V0_AVS";
 111                 regulator-min-microvolt = <784000>;
 112                 regulator-max-microvolt = <1299000>;
 113                 regulator-always-on;
 114                 max-duty-cycle = <255>;
 115                 status = "okay";
 116         };
 117
 118         soc {
 119                 #address-cells = <1>;
 120                 #size-cells = <1>;
 121                 interrupt-parent = <&intc>;
 122                 ranges;
 123                 compatible = "simple-bus";
 124
 125                 restart: restart-controller@0 {
 126                         compatible = "st,stih407-restart";
 127                         reg = <0 0>;
 128                         st,syscfg = <&syscfg_sbc_reg>;
 129                         status = "okay";
 130                 };
 131
 132                 powerdown: powerdown-controller@0 {
 133                         compatible = "st,stih407-powerdown";
 134                         reg = <0 0>;
 135                         #reset-cells = <1>;
 136                 };
 137
 138                 softreset: softreset-controller@0 {
 139                         compatible = "st,stih407-softreset";
 140                         reg = <0 0>;
 141                         #reset-cells = <1>;
 142                 };
 143
 144                 picophyreset: picophyreset-controller@0 {
 145                         compatible = "st,stih407-picophyreset";
 146                         reg = <0 0>;
 147                         #reset-cells = <1>;
 148                 };
 149
 150                 syscfg_sbc: sbc-syscfg@9620000 {
 151                         compatible = "st,stih407-sbc-syscfg", "syscon";
 152                         reg = <0x9620000 0x1000>;
 153                 };
 154
 155                 syscfg_front: front-syscfg@9280000 {
 156                         compatible = "st,stih407-front-syscfg", "syscon";
 157                         reg = <0x9280000 0x1000>;
 158                 };
 159
 160                 syscfg_rear: rear-syscfg@9290000 {
 161                         compatible = "st,stih407-rear-syscfg", "syscon";
 162                         reg = <0x9290000 0x1000>;
 163                 };
 164
 165                 syscfg_flash: flash-syscfg@92a0000 {
 166                         compatible = "st,stih407-flash-syscfg", "syscon";
 167                         reg = <0x92a0000 0x1000>;
 168                 };
 169
 170                 syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
 171                         compatible = "st,stih407-sbc-reg-syscfg", "syscon";
 172                         reg = <0x9600000 0x1000>;
 173                 };
 174
 175                 syscfg_core: core-syscfg@92b0000 {
 176                         compatible = "st,stih407-core-syscfg", "syscon";
 177                         reg = <0x92b0000 0x1000>;
 178
 179                         sti_sasg_codec: sti-sasg-codec {
 180                                 compatible = "st,stih407-sas-codec";
 181                                 #sound-dai-cells = <1>;
 182                                 status = "disabled";
 183                                 st,syscfg = <&syscfg_core>;
 184                         };
 185                 };
 186
 187                 syscfg_lpm: lpm-syscfg@94b5100 {
 188                         compatible = "st,stih407-lpm-syscfg", "syscon";
 189                         reg = <0x94b5100 0x1000>;
 190                 };
 191
 192                 irq-syscfg@0 {
 193                         compatible    = "st,stih407-irq-syscfg";
 194                         reg = <0 0>;
 195                         st,syscfg     = <&syscfg_core>;
 196                         st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
 197                                         <ST_IRQ_SYSCFG_PMU_1>;
 198                         st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
 199                                         <ST_IRQ_SYSCFG_DISABLED>;
 200                 };
 201
 202                 /* Display */
 203                 vtg_main: sti-vtg-main@8d02800 {
 204                         compatible = "st,vtg";
 205                         reg = <0x8d02800 0x200>;
 206                         interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 207                 };
 208
 209                 vtg_aux: sti-vtg-aux@8d00200 {
 210                         compatible = "st,vtg";
 211                         reg = <0x8d00200 0x100>;
 212                         interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 213                 };
 214
 215                 serial@9830000 {
 216                         compatible = "st,asc";
 217                         reg = <0x9830000 0x2c>;
 218                         interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 219                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 220                         /* Pinctrl moved out to a per-board configuration */
 221
 222                         status = "disabled";
 223                 };
 224
 225                 serial@9831000 {
 226                         compatible = "st,asc";
 227                         reg = <0x9831000 0x2c>;
 228                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 229                         pinctrl-names = "default";
 230                         pinctrl-0 = <&pinctrl_serial1>;
 231                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 232
 233                         status = "disabled";
 234                 };
 235
 236                 serial@9832000 {
 237                         compatible = "st,asc";
 238                         reg = <0x9832000 0x2c>;
 239                         interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 240                         pinctrl-names = "default";
 241                         pinctrl-0 = <&pinctrl_serial2>;
 242                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 243
 244                         status = "disabled";
 245                 };
 246
 247                 /* SBC_ASC0 - UART10 */
 248                 sbc_serial0: serial@9530000 {
 249                         compatible = "st,asc";
 250                         reg = <0x9530000 0x2c>;
 251                         interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 252                         pinctrl-names = "default";
 253                         pinctrl-0 = <&pinctrl_sbc_serial0>;
 254                         clocks = <&clk_sysin>;
 255
 256                         status = "disabled";
 257                 };
 258
 259                 serial@9531000 {
 260                         compatible = "st,asc";
 261                         reg = <0x9531000 0x2c>;
 262                         interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 263                         pinctrl-names = "default";
 264                         pinctrl-0 = <&pinctrl_sbc_serial1>;
 265                         clocks = <&clk_sysin>;
 266
 267                         status = "disabled";
 268                 };
 269
 270                 i2c@9840000 {
 271                         compatible = "st,comms-ssc4-i2c";
 272                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 273                         reg = <0x9840000 0x110>;
 274                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 275                         clock-names = "ssc";
 276                         clock-frequency = <400000>;
 277                         pinctrl-names = "default";
 278                         pinctrl-0 = <&pinctrl_i2c0_default>;
 279                         #address-cells = <1>;
 280                         #size-cells = <0>;
 281
 282                         status = "disabled";
 283                 };
 284
 285                 i2c@9841000 {
 286                         compatible = "st,comms-ssc4-i2c";
 287                         reg = <0x9841000 0x110>;
 288                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 289                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 290                         clock-names = "ssc";
 291                         clock-frequency = <400000>;
 292                         pinctrl-names = "default";
 293                         pinctrl-0 = <&pinctrl_i2c1_default>;
 294                         #address-cells = <1>;
 295                         #size-cells = <0>;
 296
 297                         status = "disabled";
 298                 };
 299
 300                 i2c@9842000 {
 301                         compatible = "st,comms-ssc4-i2c";
 302                         reg = <0x9842000 0x110>;
 303                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 304                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 305                         clock-names = "ssc";
 306                         clock-frequency = <400000>;
 307                         pinctrl-names = "default";
 308                         pinctrl-0 = <&pinctrl_i2c2_default>;
 309                         #address-cells = <1>;
 310                         #size-cells = <0>;
 311
 312                         status = "disabled";
 313                 };
 314
 315                 i2c@9843000 {
 316                         compatible = "st,comms-ssc4-i2c";
 317                         reg = <0x9843000 0x110>;
 318                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 319                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 320                         clock-names = "ssc";
 321                         clock-frequency = <400000>;
 322                         pinctrl-names = "default";
 323                         pinctrl-0 = <&pinctrl_i2c3_default>;
 324                         #address-cells = <1>;
 325                         #size-cells = <0>;
 326
 327                         status = "disabled";
 328                 };
 329
 330                 i2c@9844000 {
 331                         compatible = "st,comms-ssc4-i2c";
 332                         reg = <0x9844000 0x110>;
 333                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 334                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 335                         clock-names = "ssc";
 336                         clock-frequency = <400000>;
 337                         pinctrl-names = "default";
 338                         pinctrl-0 = <&pinctrl_i2c4_default>;
 339                         #address-cells = <1>;
 340                         #size-cells = <0>;
 341
 342                         status = "disabled";
 343                 };
 344
 345                 i2c@9845000 {
 346                         compatible = "st,comms-ssc4-i2c";
 347                         reg = <0x9845000 0x110>;
 348                         interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 349                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 350                         clock-names = "ssc";
 351                         clock-frequency = <400000>;
 352                         pinctrl-names = "default";
 353                         pinctrl-0 = <&pinctrl_i2c5_default>;
 354                         #address-cells = <1>;
 355                         #size-cells = <0>;
 356
 357                         status = "disabled";
 358                 };
 359
 360
 361                 /* SSCs on SBC */
 362                 i2c@9540000 {
 363                         compatible = "st,comms-ssc4-i2c";
 364                         reg = <0x9540000 0x110>;
 365                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 366                         clocks = <&clk_sysin>;
 367                         clock-names = "ssc";
 368                         clock-frequency = <400000>;
 369                         pinctrl-names = "default";
 370                         pinctrl-0 = <&pinctrl_i2c10_default>;
 371                         #address-cells = <1>;
 372                         #size-cells = <0>;
 373
 374                         status = "disabled";
 375                 };
 376
 377                 i2c@9541000 {
 378                         compatible = "st,comms-ssc4-i2c";
 379                         reg = <0x9541000 0x110>;
 380                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 381                         clocks = <&clk_sysin>;
 382                         clock-names = "ssc";
 383                         clock-frequency = <400000>;
 384                         pinctrl-names = "default";
 385                         pinctrl-0 = <&pinctrl_i2c11_default>;
 386                         #address-cells = <1>;
 387                         #size-cells = <0>;
 388
 389                         status = "disabled";
 390                 };
 391
 392                 usb2_picophy0: phy1@0 {
 393                         compatible = "st,stih407-usb2-phy";
 394                         reg = <0 0>;
 395                         #phy-cells = <0>;
 396                         st,syscfg = <&syscfg_core 0x100 0xf4>;
 397                         resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
 398                                  <&picophyreset STIH407_PICOPHY2_RESET>;
 399                         reset-names = "global", "port";
 400                 };
 401
 402                 miphy28lp_phy: miphy28lp@0 {
 403                         compatible = "st,miphy28lp-phy";
 404                         st,syscfg = <&syscfg_core>;
 405                         #address-cells  = <1>;
 406                         #size-cells     = <1>;
 407                         ranges;
 408                         reg = <0 0>;
 409
 410                         phy_port0: port@9b22000 {
 411                                 reg = <0x9b22000 0xff>,
 412                                       <0x9b09000 0xff>,
 413                                       <0x9b04000 0xff>;
 414                                 reg-names = "sata-up",
 415                                             "pcie-up",
 416                                             "pipew";
 417
 418                                 st,syscfg = <0x114 0x818 0xe0 0xec>;
 419                                 #phy-cells = <1>;
 420
 421                                 reset-names = "miphy-sw-rst";
 422                                 resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 423                         };
 424
 425                         phy_port1: port@9b2a000 {
 426                                 reg = <0x9b2a000 0xff>,
 427                                       <0x9b19000 0xff>,
 428                                       <0x9b14000 0xff>;
 429                                 reg-names = "sata-up",
 430                                             "pcie-up",
 431                                             "pipew";
 432
 433                                 st,syscfg = <0x118 0x81c 0xe4 0xf0>;
 434
 435                                 #phy-cells = <1>;
 436
 437                                 reset-names = "miphy-sw-rst";
 438                                 resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 439                         };
 440
 441                         phy_port2: port@8f95000 {
 442                                 reg = <0x8f95000 0xff>,
 443                                       <0x8f90000 0xff>;
 444                                 reg-names = "pipew",
 445                                             "usb3-up";
 446
 447                                 st,syscfg = <0x11c 0x820>;
 448
 449                                 #phy-cells = <1>;
 450
 451                                 reset-names = "miphy-sw-rst";
 452                                 resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 453                         };
 454                 };
 455
 456                 spi@9840000 {
 457                         compatible = "st,comms-ssc4-spi";
 458                         reg = <0x9840000 0x110>;
 459                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 460                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 461                         clock-names = "ssc";
 462                         pinctrl-0 = <&pinctrl_spi0_default>;
 463                         pinctrl-names = "default";
 464                         #address-cells = <1>;
 465                         #size-cells = <0>;
 466
 467                         status = "disabled";
 468                 };
 469
 470                 spi@9841000 {
 471                         compatible = "st,comms-ssc4-spi";
 472                         reg = <0x9841000 0x110>;
 473                         interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 474                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 475                         clock-names = "ssc";
 476                         pinctrl-names = "default";
 477                         pinctrl-0 = <&pinctrl_spi1_default>;
 478                         #address-cells = <1>;
 479                         #size-cells = <0>;
 480
 481                         status = "disabled";
 482                 };
 483
 484                 spi@9842000 {
 485                         compatible = "st,comms-ssc4-spi";
 486                         reg = <0x9842000 0x110>;
 487                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 488                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 489                         clock-names = "ssc";
 490                         pinctrl-names = "default";
 491                         pinctrl-0 = <&pinctrl_spi2_default>;
 492                         #address-cells = <1>;
 493                         #size-cells = <0>;
 494
 495                         status = "disabled";
 496                 };
 497
 498                 spi@9843000 {
 499                         compatible = "st,comms-ssc4-spi";
 500                         reg = <0x9843000 0x110>;
 501                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 502                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 503                         clock-names = "ssc";
 504                         pinctrl-names = "default";
 505                         pinctrl-0 = <&pinctrl_spi3_default>;
 506                         #address-cells = <1>;
 507                         #size-cells = <0>;
 508
 509                         status = "disabled";
 510                 };
 511
 512                 spi@9844000 {
 513                         compatible = "st,comms-ssc4-spi";
 514                         reg = <0x9844000 0x110>;
 515                         interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 516                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 517                         clock-names = "ssc";
 518                         pinctrl-names = "default";
 519                         pinctrl-0 = <&pinctrl_spi4_default>;
 520                         #address-cells = <1>;
 521                         #size-cells = <0>;
 522
 523                         status = "disabled";
 524                 };
 525
 526                 /* SBC SSC */
 527                 spi@9540000 {
 528                         compatible = "st,comms-ssc4-spi";
 529                         reg = <0x9540000 0x110>;
 530                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 531                         clocks = <&clk_sysin>;
 532                         clock-names = "ssc";
 533                         pinctrl-names = "default";
 534                         pinctrl-0 = <&pinctrl_spi10_default>;
 535                         #address-cells = <1>;
 536                         #size-cells = <0>;
 537
 538                         status = "disabled";
 539                 };
 540
 541                 spi@9541000 {
 542                         compatible = "st,comms-ssc4-spi";
 543                         reg = <0x9541000 0x110>;
 544                         interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 545                         clocks = <&clk_sysin>;
 546                         clock-names = "ssc";
 547                         pinctrl-names = "default";
 548                         pinctrl-0 = <&pinctrl_spi11_default>;
 549                         #address-cells = <1>;
 550                         #size-cells = <0>;
 551
 552                         status = "disabled";
 553                 };
 554
 555                 spi@9542000 {
 556                         compatible = "st,comms-ssc4-spi";
 557                         reg = <0x9542000 0x110>;
 558                         interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 559                         clocks = <&clk_sysin>;
 560                         clock-names = "ssc";
 561                         pinctrl-names = "default";
 562                         pinctrl-0 = <&pinctrl_spi12_default>;
 563                         #address-cells = <1>;
 564                         #size-cells = <0>;
 565
 566                         status = "disabled";
 567                 };
 568
 569                 mmc0: sdhci@9060000 {
 570                         compatible = "st,sdhci-stih407", "st,sdhci";
 571                         status = "disabled";
 572                         reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
 573                         reg-names = "mmc", "top-mmc-delay";
 574                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 575                         interrupt-names = "mmcirq";
 576                         pinctrl-names = "default";
 577                         pinctrl-0 = <&pinctrl_mmc0>;
 578                         clock-names = "mmc", "icn";
 579                         clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
 580                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 581                         bus-width = <8>;
 582                 };
 583
 584                 mmc1: sdhci@9080000 {
 585                         compatible = "st,sdhci-stih407", "st,sdhci";
 586                         status = "disabled";
 587                         reg = <0x09080000 0x7ff>;
 588                         reg-names = "mmc";
 589                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 590                         interrupt-names = "mmcirq";
 591                         pinctrl-names = "default";
 592                         pinctrl-0 = <&pinctrl_sd1>;
 593                         clock-names = "mmc", "icn";
 594                         clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
 595                                  <&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
 596                         resets = <&softreset STIH407_MMC1_SOFTRESET>;
 597                         bus-width = <4>;
 598                 };
 599
 600                 /* Watchdog and Real-Time Clock */
 601                 lpc@8787000 {
 602                         compatible = "st,stih407-lpc";
 603                         reg = <0x8787000 0x1000>;
 604                         interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
 605                         clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
 606                         timeout-sec = <120>;
 607                         st,syscfg = <&syscfg_core>;
 608                         st,lpc-mode = <ST_LPC_MODE_WDT>;
 609                 };
 610
 611                 lpc@8788000 {
 612                         compatible = "st,stih407-lpc";
 613                         reg = <0x8788000 0x1000>;
 614                         interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
 615                         clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
 616                         st,lpc-mode = <ST_LPC_MODE_CLKSRC>;
 617                 };
 618
 619                 sata0: sata@9b20000 {
 620                         compatible = "st,ahci";
 621                         reg = <0x9b20000 0x1000>;
 622
 623                         interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 624                         interrupt-names = "hostc";
 625
 626                         phys = <&phy_port0 PHY_TYPE_SATA>;
 627                         phy-names = "ahci_phy";
 628
 629                         resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 630                                  <&softreset STIH407_SATA0_SOFTRESET>,
 631                                  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
 632                         reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
 633
 634                         clock-names = "ahci_clk";
 635                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 636
 637                         ports-implemented = <0x1>;
 638
 639                         status = "disabled";
 640                 };
 641
 642                 sata1: sata@9b28000 {
 643                         compatible = "st,ahci";
 644                         reg = <0x9b28000 0x1000>;
 645
 646                         interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
 647                         interrupt-names = "hostc";
 648
 649                         phys = <&phy_port1 PHY_TYPE_SATA>;
 650                         phy-names = "ahci_phy";
 651
 652                         resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 653                                  <&softreset STIH407_SATA1_SOFTRESET>,
 654                                  <&softreset STIH407_SATA1_PWR_SOFTRESET>;
 655                         reset-names = "pwr-dwn",
 656                                       "sw-rst",
 657                                       "pwr-rst";
 658
 659                         clock-names = "ahci_clk";
 660                         clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
 661
 662                         ports-implemented = <0x1>;
 663
 664                         status = "disabled";
 665                 };
 666
 667
 668                 st_dwc3: dwc3@8f94000 {
 669                         compatible      = "st,stih407-dwc3";
 670                         reg             = <0x08f94000 0x1000>, <0x110 0x4>;
 671                         reg-names       = "reg-glue", "syscfg-reg";
 672                         st,syscfg       = <&syscfg_core>;
 673                         resets          = <&powerdown STIH407_USB3_POWERDOWN>,
 674                                           <&softreset STIH407_MIPHY2_SOFTRESET>;
 675                         reset-names     = "powerdown", "softreset";
 676                         #address-cells  = <1>;
 677                         #size-cells     = <1>;
 678                         pinctrl-names   = "default";
 679                         pinctrl-0       = <&pinctrl_usb3>;
 680                         ranges;
 681
 682                         status = "disabled";
 683
 684                         dwc3: dwc3@9900000 {
 685                                 compatible      = "snps,dwc3";
 686                                 reg             = <0x09900000 0x100000>;
 687                                 interrupts      = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 688                                 dr_mode         = "host";
 689                                 phy-names       = "usb2-phy", "usb3-phy";
 690                                 phys            = <&usb2_picophy0>,
 691                                                   <&phy_port2 PHY_TYPE_USB3>;
 692                                 snps,dis_u3_susphy_quirk;
 693                         };
 694                 };
 695
 696                 /* COMMS PWM Module */
 697                 pwm0: pwm@9810000 {
 698                         compatible      = "st,sti-pwm";
 699                         #pwm-cells      = <2>;
 700                         reg             = <0x9810000 0x68>;
 701                         interrupts      = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 702                         pinctrl-names   = "default";
 703                         pinctrl-0       = <&pinctrl_pwm0_chan0_default>;
 704                         clock-names     = "pwm";
 705                         clocks          = <&clk_sysin>;
 706                         st,pwm-num-chan = <1>;
 707
 708                         status          = "disabled";
 709                 };
 710
 711                 /* SBC PWM Module */
 712                 pwm1: pwm@9510000 {
 713                         compatible      = "st,sti-pwm";
 714                         #pwm-cells      = <2>;
 715                         reg             = <0x9510000 0x68>;
 716                         interrupts      = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 717                         pinctrl-names   = "default";
 718                         pinctrl-0       = <&pinctrl_pwm1_chan0_default
 719                                         &pinctrl_pwm1_chan1_default
 720                                         &pinctrl_pwm1_chan2_default
 721                                         &pinctrl_pwm1_chan3_default>;
 722                         clock-names     = "pwm";
 723                         clocks          = <&clk_sysin>;
 724                         st,pwm-num-chan = <4>;
 725
 726                         status          = "disabled";
 727                 };
 728
 729                 rng10: rng@8a89000 {
 730                         compatible      = "st,rng";
 731                         reg             = <0x08a89000 0x1000>;
 732                         clocks          = <&clk_sysin>;
 733                         status          = "okay";
 734                 };
 735
 736                 rng11: rng@8a8a000 {
 737                         compatible      = "st,rng";
 738                         reg             = <0x08a8a000 0x1000>;
 739                         clocks          = <&clk_sysin>;
 740                         status          = "okay";
 741                 };
 742
 743                 ethernet0: dwmac@9630000 {
 744                         device_type = "network";
 745                         status = "disabled";
 746                         compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
 747                         reg = <0x9630000 0x8000>, <0x80 0x4>;
 748                         reg-names = "stmmaceth", "sti-ethconf";
 749
 750                         st,syscon = <&syscfg_sbc_reg 0x80>;
 751                         st,gmac_en;
 752                         resets = <&softreset STIH407_ETH1_SOFTRESET>;
 753                         reset-names = "stmmaceth";
 754
 755                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
 756                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 757                         interrupt-names = "macirq", "eth_wake_irq";
 758
 759                         /* DMA Bus Mode */
 760                         snps,pbl = <8>;
 761
 762                         pinctrl-names = "default";
 763                         pinctrl-0 = <&pinctrl_rgmii1>;
 764
 765                         clock-names = "stmmaceth", "sti-ethclk";
 766                         clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 767                                  <&clk_s_c0_flexgen CLK_ETH_PHY>;
 768                 };
 769
 770                 mailbox0: mailbox@8f00000  {
 771                         compatible      = "st,stih407-mailbox";
 772                         reg             = <0x8f00000 0x1000>;
 773                         interrupts      = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 774                         #mbox-cells     = <2>;
 775                         mbox-name       = "a9";
 776                         status          = "okay";
 777                 };
 778
 779                 mailbox1: mailbox@8f01000 {
 780                         compatible      = "st,stih407-mailbox";
 781                         reg             = <0x8f01000 0x1000>;
 782                         #mbox-cells     = <2>;
 783                         mbox-name       = "st231_gp_1";
 784                         status          = "okay";
 785                 };
 786
 787                 mailbox2: mailbox@8f02000 {
 788                         compatible      = "st,stih407-mailbox";
 789                         reg             = <0x8f02000 0x1000>;
 790                         #mbox-cells     = <2>;
 791                         mbox-name       = "st231_gp_0";
 792                         status          = "okay";
 793                 };
 794
 795                 mailbox3: mailbox@8f03000 {
 796                         compatible      = "st,stih407-mailbox";
 797                         reg             = <0x8f03000 0x1000>;
 798                         #mbox-cells     = <2>;
 799                         mbox-name       = "st231_audio_video";
 800                         status          = "okay";
 801                 };
 802
 803                 st231_gp0: st231-gp0@0 {
 804                         compatible      = "st,st231-rproc";
 805                         reg             = <0 0>;
 806                         memory-region   = <&gp0_reserved>;
 807                         resets          = <&softreset STIH407_ST231_GP0_SOFTRESET>;
 808                         reset-names     = "sw_reset";
 809                         clocks          = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
 810                         clock-frequency = <600000000>;
 811                         st,syscfg       = <&syscfg_core 0x22c>;
 812                         #mbox-cells = <1>;
 813                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 814                         mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
 815                 };
 816
 817                 st231_delta: st231-delta@0 {
 818                         compatible      = "st,st231-rproc";
 819                         reg             = <0 0>;
 820                         memory-region   = <&delta_reserved>;
 821                         resets          = <&softreset STIH407_ST231_DMU_SOFTRESET>;
 822                         reset-names     = "sw_reset";
 823                         clocks          = <&clk_s_c0_flexgen CLK_ST231_DMU>;
 824                         clock-frequency = <600000000>;
 825                         st,syscfg       = <&syscfg_core 0x224>;
 826                         #mbox-cells = <1>;
 827                         mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
 828                         mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
 829                 };
 830
 831                 /* fdma audio */
 832                 fdma0: dma-controller@8e20000 {
 833                         compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
 834                         reg = <0x8e20000 0x8000>,
 835                               <0x8e30000 0x3000>,
 836                               <0x8e37000 0x1000>,
 837                               <0x8e38000 0x8000>;
 838                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 839                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 840                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 841                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 842                                  <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 843                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 844                         dma-channels = <16>;
 845                         #dma-cells = <3>;
 846                 };
 847
 848                 /* fdma app */
 849                 fdma1: dma-controller@8e40000 {
 850                         compatible = "st,stih407-fdma-mpe31-12", "st,slim-rproc";
 851                         reg = <0x8e40000 0x8000>,
 852                               <0x8e50000 0x3000>,
 853                               <0x8e57000 0x1000>,
 854                               <0x8e58000 0x8000>;
 855                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 856                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 857                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 858                                 <&clk_s_c0_flexgen CLK_TX_ICN_DMU>,
 859                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 860
 861                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 862                         dma-channels = <16>;
 863                         #dma-cells = <3>;
 864
 865                         status = "disabled";
 866                 };
 867
 868                 /* fdma free running */
 869                 fdma2: dma-controller@8e60000 {
 870                         compatible = "st,stih407-fdma-mpe31-13", "st,slim-rproc";
 871                         reg = <0x8e60000 0x8000>,
 872                               <0x8e70000 0x3000>,
 873                               <0x8e77000 0x1000>,
 874                               <0x8e78000 0x8000>;
 875                         reg-names = "slimcore", "dmem", "peripherals", "imem";
 876                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 877                         dma-channels = <16>;
 878                         #dma-cells = <3>;
 879                         clocks = <&clk_s_c0_flexgen CLK_FDMA>,
 880                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>,
 881                                 <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
 882                                 <&clk_s_c0_flexgen CLK_EXT2F_A9>;
 883
 884                         status = "disabled";
 885                 };
 886
 887                 sti_uni_player0: sti-uni-player@8d80000 {
 888                         compatible = "st,stih407-uni-player-hdmi";
 889                         #sound-dai-cells = <0>;
 890                         st,syscfg = <&syscfg_core>;
 891                         clocks = <&clk_s_d0_flexgen CLK_PCM_0>;
 892                         assigned-clocks = <&clk_s_d0_quadfs 0>, <&clk_s_d0_flexgen CLK_PCM_0>;
 893                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 0>;
 894                         assigned-clock-rates = <50000000>;
 895                         reg = <0x8d80000 0x158>;
 896                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 897                         dmas = <&fdma0 2 0 1>;
 898                         dma-names = "tx";
 899
 900                         status          = "disabled";
 901                 };
 902
 903                 sti_uni_player1: sti-uni-player@8d81000 {
 904                         compatible = "st,stih407-uni-player-pcm-out";
 905                         #sound-dai-cells = <0>;
 906                         st,syscfg = <&syscfg_core>;
 907                         clocks = <&clk_s_d0_flexgen CLK_PCM_1>;
 908                         assigned-clocks = <&clk_s_d0_quadfs 1>, <&clk_s_d0_flexgen CLK_PCM_1>;
 909                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 1>;
 910                         assigned-clock-rates = <50000000>;
 911                         reg = <0x8d81000 0x158>;
 912                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 913                         dmas = <&fdma0 3 0 1>;
 914                         dma-names = "tx";
 915
 916                         status = "disabled";
 917                 };
 918
 919                 sti_uni_player2: sti-uni-player@8d82000 {
 920                         compatible = "st,stih407-uni-player-dac";
 921                         #sound-dai-cells = <0>;
 922                         st,syscfg = <&syscfg_core>;
 923                         clocks = <&clk_s_d0_flexgen CLK_PCM_2>;
 924                         assigned-clocks = <&clk_s_d0_quadfs 2>, <&clk_s_d0_flexgen CLK_PCM_2>;
 925                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 2>;
 926                         assigned-clock-rates = <50000000>;
 927                         reg = <0x8d82000 0x158>;
 928                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 929                         dmas = <&fdma0 4 0 1>;
 930                         dma-names = "tx";
 931
 932                         status = "disabled";
 933                 };
 934
 935                 sti_uni_player3: sti-uni-player@8d85000 {
 936                         compatible = "st,stih407-uni-player-spdif";
 937                         #sound-dai-cells = <0>;
 938                         st,syscfg = <&syscfg_core>;
 939                         clocks = <&clk_s_d0_flexgen CLK_SPDIFF>;
 940                         assigned-clocks = <&clk_s_d0_quadfs 3>, <&clk_s_d0_flexgen CLK_SPDIFF>;
 941                         assigned-clock-parents = <0>, <&clk_s_d0_quadfs 3>;
 942                         assigned-clock-rates = <50000000>;
 943                         reg = <0x8d85000 0x158>;
 944                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 945                         dmas = <&fdma0 7 0 1>;
 946                         dma-names = "tx";
 947
 948                         status = "disabled";
 949                 };
 950
 951                 sti_uni_reader0: sti-uni-reader@8d83000 {
 952                         compatible = "st,stih407-uni-reader-pcm_in";
 953                         #sound-dai-cells = <0>;
 954                         st,syscfg = <&syscfg_core>;
 955                         reg = <0x8d83000 0x158>;
 956                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 957                         dmas = <&fdma0 5 0 1>;
 958                         dma-names = "rx";
 959
 960                         status = "disabled";
 961                 };
 962
 963                 sti_uni_reader1: sti-uni-reader@8d84000 {
 964                         compatible = "st,stih407-uni-reader-hdmi";
 965                         #sound-dai-cells = <0>;
 966                         st,syscfg = <&syscfg_core>;
 967                         reg = <0x8d84000 0x158>;
 968                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 969                         dmas = <&fdma0 6 0 1>;
 970                         dma-names = "rx";
 971
 972                         status = "disabled";
 973                 };
 974
 975                 delta0@0 {
 976                         compatible = "st,st-delta";
 977                         reg = <0 0>;
 978                         clock-names = "delta",
 979                                       "delta-st231",
 980                                       "delta-flash-promip";
 981                         clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
 982                                  <&clk_s_c0_flexgen CLK_ST231_DMU>,
 983                                  <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
 984                 };
 985         };
 986 };