arch/arm/boot/dts/s5pv210-aries.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Samsung's S5PV210 based Galaxy Aries board device tree source
   4  */
   5
   6 /dts-v1/;
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include "s5pv210.dtsi"
  10
  11 / {
  12         compatible = "samsung,aries", "samsung,s5pv210";
  13
  14         aliases: aliases {
  15                 i2c4 = &i2c_sound;
  16                 i2c5 = &i2c_accel;
  17                 i2c6 = &i2c_pmic;
  18                 i2c7 = &i2c_musb;
  19                 i2c9 = &i2c_fuel;
  20                 i2c10 = &i2c_touchkey;
  21                 i2c11 = &i2c_prox;
  22                 i2c12 = &i2c_magnetometer;
  23         };
  24
  25         memory@30000000 {
  26                 device_type = "memory";
  27                 reg = <0x30000000 0x05000000
  28                         0x40000000 0x10000000
  29                         0x50000000 0x08000000>;
  30         };
  31
  32         reserved-memory {
  33                 #address-cells = <1>;
  34                 #size-cells = <1>;
  35                 ranges;
  36
  37                 mfc_left: region@43000000 {
  38                         compatible = "shared-dma-pool";
  39                         no-map;
  40                         reg = <0x43000000 0x2000000>;
  41                 };
  42
  43                 mfc_right: region@51000000 {
  44                         compatible = "shared-dma-pool";
  45                         no-map;
  46                         reg = <0x51000000 0x2000000>;
  47                 };
  48         };
  49
  50         vibrator_pwr: regulator-fixed-0 {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "vibrator-en";
  53                 enable-active-high;
  54                 gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
  55
  56                 pinctrl-names = "default";
  57                 pinctr-0 = <&vibrator_ena>;
  58         };
  59
  60         touchkey_vdd: regulator-fixed-1 {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "VTOUCH_3.3V";
  63                 regulator-min-microvolt = <3300000>;
  64                 regulator-max-microvolt = <3300000>;
  65                 enable-active-high;
  66                 gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
  67
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&touchkey_vdd_ena>;
  70         };
  71
  72         gp2a_vled: regulator-fixed-2 {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "VLED";
  75                 enable-active-high;
  76                 gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
  77                 regulator-min-microvolt = <2800000>;
  78                 regulator-max-microvolt = <2800000>;
  79
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&gp2a_power>;
  82         };
  83
  84         wifi_pwrseq: wifi-pwrseq {
  85                 compatible = "mmc-pwrseq-simple";
  86                 reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
  87                 pinctrl-names = "default";
  88                 pinctrl-0 = <&wlan_gpio_rst>;
  89                 post-power-on-delay-ms = <500>;
  90                 power-off-delay-us = <500>;
  91         };
  92
  93         i2c_sound: i2c-gpio-0 {
  94                 compatible = "i2c-gpio";
  95                 sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  96                 scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  97                 i2c-gpio,delay-us = <2>;
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&sound_i2c_pins>;
 103
 104                 wm8994: wm8994@1a {
 105                         compatible = "wlf,wm8994";
 106                         reg = <0x1a>;
 107
 108                         #sound-dai-cells = <0>;
 109
 110                         gpio-controller;
 111                         #gpio-cells = <2>;
 112
 113                         clocks = <&clocks MOUT_CLKOUT>;
 114                         clock-names = "MCLK1";
 115
 116                         AVDD2-supply = <&buck3_reg>;
 117                         DBVDD-supply = <&buck3_reg>;
 118                         CPVDD-supply = <&buck3_reg>;
 119                         SPKVDD1-supply = <&buck3_reg>;
 120                         SPKVDD2-supply = <&buck3_reg>;
 121
 122                         wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
 123                                         0xa101 0x0100 0x8100 0x0100 0x0100
 124                                         0x0100>;
 125
 126                         wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 127                         wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
 128
 129                         wlf,lineout1-se;
 130                         wlf,lineout2-se;
 131
 132                         assigned-clocks = <&clocks MOUT_CLKOUT>;
 133                         assigned-clock-rates = <0>;
 134                         assigned-clock-parents = <&xusbxti>;
 135
 136                         pinctrl-names = "default";
 137                         pinctrl-0 = <&codec_ldo>;
 138                 };
 139         };
 140
 141         i2c_accel: i2c-gpio-1 {
 142                 compatible = "i2c-gpio";
 143                 sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 144                 scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 145                 i2c-gpio,delay-us = <2>;
 146                 #address-cells = <1>;
 147                 #size-cells = <0>;
 148
 149                 pinctrl-names = "default";
 150                 pinctrl-0 = <&accel_i2c_pins>;
 151
 152                 accelerometer@38 {
 153                         compatible = "bosch,bma023";
 154                         reg = <0x38>;
 155
 156                         vdd-supply = <&ldo9_reg>;
 157                         vddio-supply = <&ldo9_reg>;
 158                 };
 159         };
 160
 161         i2c_pmic: i2c-gpio-2 {
 162                 compatible = "i2c-gpio";
 163                 sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 164                 scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 165                 i2c-gpio,delay-us = <2>;
 166                 #address-cells = <1>;
 167                 #size-cells = <0>;
 168
 169                 pinctrl-names = "default";
 170                 pinctrl-0 = <&pmic_i2c_pins>;
 171
 172                 pmic@66 {
 173                         compatible = "maxim,max8998";
 174                         reg = <0x66>;
 175                         interrupt-parent = <&gph0>;
 176                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 177
 178                         max8998,pmic-buck1-default-dvs-idx = <1>;
 179                         max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
 180                                                         <&gph0 4 GPIO_ACTIVE_HIGH>;
 181                         max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
 182                                                         <1050000>, <950000>;
 183
 184                         max8998,pmic-buck2-default-dvs-idx = <0>;
 185                         max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
 186                         max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
 187
 188                         pinctrl-names = "default";
 189                         pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
 190
 191                         regulators {
 192                                 ldo2_reg: LDO2 {
 193                                         regulator-name = "VALIVE_1.2V";
 194                                         regulator-min-microvolt = <1200000>;
 195                                         regulator-max-microvolt = <1200000>;
 196                                         regulator-always-on;
 197
 198                                         regulator-state-mem {
 199                                                 regulator-on-in-suspend;
 200                                         };
 201                                 };
 202
 203                                 ldo3_reg: LDO3 {
 204                                         regulator-name = "VUSB_1.1V";
 205                                         regulator-min-microvolt = <1100000>;
 206                                         regulator-max-microvolt = <1100000>;
 207
 208                                         regulator-state-mem {
 209                                                 regulator-off-in-suspend;
 210                                         };
 211                                 };
 212
 213                                 ldo4_reg: LDO4 {
 214                                         regulator-name = "VADC_3.3V";
 215                                         regulator-min-microvolt = <3300000>;
 216                                         regulator-max-microvolt = <3300000>;
 217
 218                                         regulator-state-mem {
 219                                                 regulator-off-in-suspend;
 220                                         };
 221                                 };
 222
 223                                 ldo5_reg: LDO5 {
 224                                         regulator-name = "VTF_2.8V";
 225                                         regulator-min-microvolt = <2800000>;
 226                                         regulator-max-microvolt = <2800000>;
 227
 228                                         regulator-state-mem {
 229                                                 regulator-off-in-suspend;
 230                                         };
 231                                 };
 232
 233                                 ldo6_reg: LDO6 {
 234                                         regulator-name = "LDO6";
 235                                         regulator-min-microvolt = <1600000>;
 236                                         regulator-max-microvolt = <3600000>;
 237                                 };
 238
 239                                 ldo7_reg: LDO7 {
 240                                         regulator-name = "VLCD_1.8V";
 241                                         regulator-min-microvolt = <1800000>;
 242                                         regulator-max-microvolt = <1800000>;
 243
 244                                         regulator-state-mem {
 245                                                 regulator-off-in-suspend;
 246                                         };
 247                                 };
 248
 249                                 ldo8_reg: LDO8 {
 250                                         regulator-name = "VUSB_3.3V";
 251                                         regulator-min-microvolt = <3300000>;
 252                                         regulator-max-microvolt = <3300000>;
 253
 254                                         regulator-state-mem {
 255                                                 regulator-off-in-suspend;
 256                                         };
 257                                 };
 258
 259                                 ldo9_reg: LDO9 {
 260                                         regulator-name = "VCC_2.8V_PDA";
 261                                         regulator-min-microvolt = <2800000>;
 262                                         regulator-max-microvolt = <2800000>;
 263                                         regulator-always-on;
 264                                 };
 265
 266                                 ldo10_reg: LDO10 {
 267                                         regulator-name = "VPLL_1.2V";
 268                                         regulator-min-microvolt = <1200000>;
 269                                         regulator-max-microvolt = <1200000>;
 270                                         regulator-always-on;
 271
 272                                         regulator-state-mem {
 273                                                 regulator-on-in-suspend;
 274                                         };
 275                                 };
 276
 277                                 ldo11_reg: LDO11 {
 278                                         regulator-name = "CAM_AF_3.0V";
 279                                         regulator-min-microvolt = <3000000>;
 280                                         regulator-max-microvolt = <3000000>;
 281
 282                                         regulator-state-mem {
 283                                                 regulator-off-in-suspend;
 284                                         };
 285                                 };
 286
 287                                 ldo12_reg: LDO12 {
 288                                         regulator-name = "CAM_SENSOR_CORE_1.2V";
 289                                         regulator-min-microvolt = <1200000>;
 290                                         regulator-max-microvolt = <1200000>;
 291
 292                                         regulator-state-mem {
 293                                                 regulator-off-in-suspend;
 294                                         };
 295                                 };
 296
 297                                 ldo13_reg: LDO13 {
 298                                         regulator-name = "VGA_VDDIO_2.8V";
 299                                         regulator-min-microvolt = <2800000>;
 300                                         regulator-max-microvolt = <2800000>;
 301
 302                                         regulator-state-mem {
 303                                                 regulator-off-in-suspend;
 304                                         };
 305                                 };
 306
 307                                 ldo14_reg: LDO14 {
 308                                         regulator-name = "VGA_DVDD_1.8V";
 309                                         regulator-min-microvolt = <1800000>;
 310                                         regulator-max-microvolt = <1800000>;
 311
 312                                         regulator-state-mem {
 313                                                 regulator-off-in-suspend;
 314                                         };
 315                                 };
 316
 317                                 ldo15_reg: LDO15 {
 318                                         regulator-name = "CAM_ISP_HOST_2.8V";
 319                                         regulator-min-microvolt = <2800000>;
 320                                         regulator-max-microvolt = <2800000>;
 321
 322                                         regulator-state-mem {
 323                                                 regulator-off-in-suspend;
 324                                         };
 325                                 };
 326
 327                                 ldo16_reg: LDO16 {
 328                                         regulator-name = "VGA_AVDD_2.8V";
 329                                         regulator-min-microvolt = <2800000>;
 330                                         regulator-max-microvolt = <2800000>;
 331
 332                                         regulator-state-mem {
 333                                                 regulator-off-in-suspend;
 334                                         };
 335                                 };
 336
 337                                 ldo17_reg: LDO17 {
 338                                         regulator-name = "VCC_3.0V_LCD";
 339                                         regulator-min-microvolt = <3000000>;
 340                                         regulator-max-microvolt = <3000000>;
 341
 342                                         regulator-state-mem {
 343                                                 regulator-off-in-suspend;
 344                                         };
 345                                 };
 346
 347                                 buck1_reg: BUCK1 {
 348                                         regulator-name = "vddarm";
 349                                         regulator-min-microvolt = <750000>;
 350                                         regulator-max-microvolt = <1500000>;
 351
 352                                         regulator-state-mem {
 353                                                 regulator-off-in-suspend;
 354                                                 regulator-suspend-microvolt = <1250000>;
 355                                         };
 356                                 };
 357
 358                                 buck2_reg: BUCK2 {
 359                                         regulator-name = "vddint";
 360                                         regulator-min-microvolt = <750000>;
 361                                         regulator-max-microvolt = <1500000>;
 362
 363                                         regulator-state-mem {
 364                                                 regulator-off-in-suspend;
 365                                                 regulator-suspend-microvolt = <1100000>;
 366                                         };
 367                                 };
 368
 369                                 buck3_reg: BUCK3 {
 370                                         regulator-name = "VCC_1.8V";
 371                                         regulator-min-microvolt = <1800000>;
 372                                         regulator-max-microvolt = <1800000>;
 373                                         regulator-always-on;
 374                                 };
 375
 376                                 buck4_reg: BUCK4 {
 377                                         regulator-name = "CAM_ISP_CORE_1.2V";
 378                                         regulator-min-microvolt = <1200000>;
 379                                         regulator-max-microvolt = <1200000>;
 380
 381                                         regulator-state-mem {
 382                                                 regulator-off-in-suspend;
 383                                         };
 384                                 };
 385
 386                                 ap32khz_reg: EN32KHz-AP {
 387                                         regulator-name = "32KHz AP";
 388                                         regulator-always-on;
 389                                 };
 390
 391                                 cp32khz_reg: EN32KHz-CP {
 392                                         regulator-name = "32KHz CP";
 393                                 };
 394
 395                                 vichg_reg: ENVICHG {
 396                                         regulator-name = "VICHG";
 397                                         regulator-always-on;
 398                                 };
 399
 400                                 safe1_sreg: ESAFEOUT1 {
 401                                         regulator-name = "SAFEOUT1";
 402                                 };
 403
 404                                 safe2_sreg: ESAFEOUT2 {
 405                                         regulator-name = "SAFEOUT2";
 406                                 };
 407                         };
 408                 };
 409         };
 410
 411         i2c_musb: i2c-gpio-3 {
 412                 compatible = "i2c-gpio";
 413                 sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 414                 scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 415                 i2c-gpio,delay-us = <2>;
 416                 #address-cells = <1>;
 417                 #size-cells = <0>;
 418
 419                 pinctrl-names = "default";
 420                 pinctrl-0 = <&musb_i2c_pins>;
 421
 422                 fsa9480: musb@25 {
 423                         compatible = "fcs,fsa9480";
 424                         reg = <0x25>;
 425                         interrupt-parent = <&gph2>;
 426                         interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 427
 428                         pinctrl-names = "default";
 429                         pinctrl-0 = <&musb_irq>;
 430                 };
 431         };
 432
 433         i2c_fuel: i2c-gpio-4 {
 434                 compatible = "i2c-gpio";
 435                 sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 436                 scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 437                 i2c-gpio,delay-us = <2>;
 438                 #address-cells = <1>;
 439                 #size-cells = <0>;
 440
 441                 pinctrl-names = "default";
 442                 pinctrl-0 = <&fg_i2c_pins>;
 443
 444                 fg: fuelgauge@36 {
 445                         compatible = "maxim,max17040";
 446                         reg = <0x36>;
 447                 };
 448         };
 449
 450         i2c_touchkey: i2c-gpio-5 {
 451                 compatible = "i2c-gpio";
 452                 sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 453                 scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 454                 i2c-gpio,delay-us = <2>;
 455                 #address-cells = <1>;
 456                 #size-cells = <0>;
 457
 458                 pinctrl-names = "default";
 459                 pinctrl-0 = <&touchkey_i2c_pins>;
 460
 461                 touchkey@20 {
 462                         compatible = "cypress,aries-touchkey";
 463                         reg = <0x20>;
 464                         vdd-supply = <&touchkey_vdd>;
 465                         vcc-supply = <&buck3_reg>;
 466                         linux,keycodes = <KEY_MENU KEY_BACK
 467                                           KEY_HOMEPAGE KEY_SEARCH>;
 468                         interrupt-parent = <&gpj4>;
 469                         interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 470
 471                         pinctrl-names = "default";
 472                         pinctrl-0 = <&touchkey_irq>;
 473                 };
 474         };
 475
 476         i2c_prox: i2c-gpio-6 {
 477                 compatible = "i2c-gpio";
 478                 sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 479                 scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 480                 i2c-gpio,delay-us = <2>;
 481                 #address-cells = <1>;
 482                 #size-cells = <0>;
 483
 484                 pinctrl-names = "default";
 485                 pinctrl-0 = <&prox_i2c_pins>;
 486
 487                 light-sensor@44 {
 488                         compatible = "sharp,gp2ap002a00f";
 489                         reg = <0x44>;
 490                         interrupt-parent = <&gph0>;
 491                         interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
 492                         vdd-supply = <&gp2a_vled>;
 493                         vio-supply = <&gp2a_vled>;
 494                         io-channels = <&gp2a_shunt>;
 495                         io-channel-names = "alsout";
 496                         sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
 497                         sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
 498
 499                         pinctrl-names = "default";
 500                         pinctrl-0 = <&gp2a_irq>;
 501                 };
 502         };
 503
 504         i2c_magnetometer: i2c-gpio-7 {
 505                 compatible = "i2c-gpio";
 506                 sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 507                 scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 508                 i2c-gpio,delay-us = <2>;
 509                 #address-cells = <1>;
 510                 #size-cells = <0>;
 511
 512                 pinctrl-names = "default";
 513                 pinctrl-0 = <&magnetometer_i2c_pins>;
 514
 515                 status = "disabled";
 516
 517                 /* Yamaha yas529 magnetometer, no mainline binding */
 518         };
 519
 520         vibrator: pwm-vibrator {
 521                 compatible = "pwm-vibrator";
 522                 pwms = <&pwm 1 44642 0>;
 523                 pwm-names = "enable";
 524                 vcc-supply = <&vibrator_pwr>;
 525                 pinctrl-names = "default";
 526                 pinctrl-0 = <&pwm1_out>;
 527         };
 528
 529         poweroff: syscon-poweroff {
 530                 compatible = "syscon-poweroff";
 531                 regmap = <&pmu_syscon>;
 532                 offset = <0x681c>; /* PS_HOLD_CONTROL */
 533                 value = <0x5200>;
 534         };
 535
 536         spi_lcd: spi-gpio-0 {
 537                 compatible = "spi-gpio";
 538                 #address-cells = <1>;
 539                 #size-cells = <0>;
 540
 541                 sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
 542                 mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
 543                 cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
 544                 num-chipselects = <1>;
 545
 546                 pinctrl-names = "default";
 547                 pinctrl-0 = <&lcd_spi_pins>;
 548
 549                 panel@0 {
 550                         compatible = "samsung,s6e63m0";
 551                         reg = <0>;
 552                         reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
 553                         vdd3-supply = <&ldo7_reg>;
 554                         vci-supply = <&ldo17_reg>;
 555                         spi-cs-high;
 556                         spi-max-frequency = <1200000>;
 557
 558                         pinctrl-names = "default";
 559                         pinctrl-0 = <&panel_rst>;
 560
 561                         port {
 562                                 lcd_ep: endpoint {
 563                                         remote-endpoint = <&fimd_ep>;
 564                                 };
 565                         };
 566                 };
 567         };
 568 };
 569
 570 &adc {
 571         vdd-supply = <&ldo4_reg>;
 572
 573         status = "okay";
 574
 575         gp2a_shunt: current-sense-shunt {
 576                 compatible = "current-sense-shunt";
 577                 io-channels = <&adc 9>;
 578                 shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
 579                 #io-channel-cells = <0>;
 580                 io-channel-ranges;
 581         };
 582 };
 583
 584 &fimd {
 585         pinctrl-names = "default";
 586         pinctrl-0 = <&lcd_clk &lcd_data24>;
 587         status = "okay";
 588
 589         samsung,invert-vden;
 590         samsung,invert-vclk;
 591
 592         #address-cells = <1>;
 593         #size-cells = <0>;
 594
 595         port@3 {
 596                 reg = <3>;
 597                 fimd_ep: endpoint {
 598                         remote-endpoint = <&lcd_ep>;
 599                 };
 600         };
 601 };
 602
 603 &hsotg {
 604         vusb_a-supply = <&ldo8_reg>;
 605         vusb_d-supply = <&ldo3_reg>;
 606         dr_mode = "peripheral";
 607         status = "okay";
 608 };
 609
 610 &i2c2 {
 611         samsung,i2c-sda-delay = <100>;
 612         samsung,i2c-max-bus-freq = <400000>;
 613         samsung,i2c-slave-addr = <0x10>;
 614         status = "okay";
 615
 616         touchscreen@4a {
 617                 compatible = "atmel,maxtouch";
 618                 reg = <0x4a>;
 619                 interrupt-parent = <&gpj0>;
 620                 interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 621                 pinctrl-names = "default";
 622                 pinctrl-0 = <&ts_irq>;
 623                 reset-gpios = <&gpj1 3 GPIO_ACTIVE_HIGH>;
 624         };
 625 };
 626
 627 &mfc {
 628         memory-region = <&mfc_left>, <&mfc_right>;
 629 };
 630
 631 &pinctrl0 {
 632         bt_reset: bt-reset {
 633                 samsung,pins = "gpb-3";
 634                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 635                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 636                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 637         };
 638
 639         wlan_bt_en: wlan-bt-en {
 640                 samsung,pins = "gpb-5";
 641                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 642                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 643                 samsung,pin-val = <1>;
 644         };
 645
 646         codec_ldo: codec-ldo {
 647                 samsung,pins = "gpf3-4";
 648                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 649                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 650         };
 651
 652         prox_i2c_pins: gp2a-i2c-pins {
 653                 samsung,pins = "gpg0-2", "gpg2-2";
 654                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 655                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 656         };
 657
 658         wlan_gpio_rst: wlan-gpio-rst {
 659                 samsung,pins = "gpg1-2";
 660                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 661                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 662         };
 663
 664         bt_wake: bt-wake {
 665                 samsung,pins = "gpg3-4";
 666                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 667                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 668         };
 669
 670         gp2a_irq: gp2a-irq {
 671                 samsung,pins = "gph0-2";
 672                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 673                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 674                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 675         };
 676
 677         pmic_dvs_pins: pmic-dvs-pins {
 678                 samsung,pins = "gph0-3", "gph0-4", "gph0-5";
 679                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 680                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 681                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 682                 samsung,pin-val = <0>;
 683         };
 684
 685         pmic_irq: pmic-irq {
 686                 samsung,pins = "gph0-7";
 687                 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 688                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 689                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 690         };
 691
 692         wifi_host_wake: wifi-host-wake {
 693                 samsung,pins = "gph2-4";
 694                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 695                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 696                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 697         };
 698
 699         bt_host_wake: bt-host-wake {
 700                 samsung,pins = "gph2-5";
 701                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 702                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 703                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 704         };
 705
 706         musb_irq: musq-irq {
 707                 samsung,pins = "gph2-7";
 708                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 709                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 710                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 711         };
 712
 713         tf_detect: tf-detect {
 714                 samsung,pins = "gph3-4";
 715                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 716                 samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 717                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 718         };
 719
 720         wifi_wake: wifi-wake {
 721                 samsung,pins = "gph3-5";
 722                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 723                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 724         };
 725
 726         magnetometer_i2c_pins: yas529-i2c-pins {
 727                 samsung,pins = "gpj0-0", "gpj0-1";
 728                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 729                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 730         };
 731
 732         ts_irq: ts-irq {
 733                 samsung,pins = "gpj0-5";
 734                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 735                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 736                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 737         };
 738
 739         vibrator_ena: vibrator-ena {
 740                 samsung,pins = "gpj1-1";
 741                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 742                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 743         };
 744
 745         gp2a_power: gp2a-power {
 746                 samsung,pins = "gpj1-4";
 747                 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 748                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 749                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 750         };
 751
 752         touchkey_i2c_pins: touchkey-i2c-pins {
 753                 samsung,pins = "gpj3-0", "gpj3-1";
 754                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 755                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 756         };
 757
 758         touchkey_vdd_ena: touchkey-vdd-ena {
 759                 samsung,pins = "gpj3-2";
 760                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 761                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 762         };
 763
 764         musb_i2c_pins: musb-i2c-pins {
 765                 samsung,pins = "gpj3-4", "gpj3-5";
 766                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 767                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 768         };
 769
 770         accel_i2c_pins: accel-i2c-pins {
 771                 samsung,pins = "gpj3-6", "gpj3-7";
 772                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 773                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 774         };
 775
 776         pmic_i2c_pins: pmic-i2c-pins {
 777                 samsung,pins = "gpj4-0", "gpj4-3";
 778                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 779                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 780         };
 781
 782         touchkey_irq: touchkey-irq {
 783                 samsung,pins = "gpj4-1";
 784                 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 785                 samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 786                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 787         };
 788
 789         lcd_spi_pins: spi-lcd-pins {
 790                 samsung,pins = "mp01-1", "mp04-1", "mp04-3";
 791                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 792                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 793         };
 794
 795         fg_i2c_pins: fg-i2c-pins {
 796                 samsung,pins = "mp05-0", "mp05-1";
 797                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 798                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 799         };
 800
 801         sound_i2c_pins: sound-i2c-pins {
 802                 samsung,pins = "mp05-2", "mp05-3";
 803                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 804                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 805         };
 806
 807         panel_rst: panel-rst {
 808                 samsung,pins = "mp05-5";
 809                 samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 810                 samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 811         };
 812 };
 813
 814 &pwm {
 815         samsung,pwm-outputs = <1>;
 816 };
 817
 818 &sdhci1 {
 819         #address-cells = <1>;
 820         #size-cells = <0>;
 821
 822         bus-width = <4>;
 823         max-frequency = <38400000>;
 824         pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
 825         pinctrl-names = "default";
 826         cap-sd-highspeed;
 827         cap-mmc-highspeed;
 828         keep-power-in-suspend;
 829
 830         mmc-pwrseq = <&wifi_pwrseq>;
 831         non-removable;
 832         status = "okay";
 833
 834         assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
 835         assigned-clock-rates = <0>, <50000000>;
 836         assigned-clock-parents = <&clocks MOUT_MPLL>;
 837
 838         wlan@1 {
 839                 reg = <1>;
 840                 compatible = "brcm,bcm4329-fmac";
 841                 interrupt-parent = <&gph2>;
 842                 interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
 843                 interrupt-names = "host-wake";
 844         };
 845 };
 846
 847 &sdhci2 {
 848         bus-width = <4>;
 849         cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
 850         vmmc-supply = <&ldo5_reg>;
 851         pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
 852         pinctrl-names = "default";
 853         status = "okay";
 854
 855         assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
 856         assigned-clock-rates = <0>, <50000000>;
 857         assigned-clock-parents = <&clocks MOUT_MPLL>;
 858 };
 859
 860 &uart0 {
 861         assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
 862         assigned-clock-rates = <0>, <111166667>;
 863         assigned-clock-parents = <&clocks MOUT_MPLL>;
 864
 865         status = "okay";
 866
 867         bluetooth {
 868                 compatible = "brcm,bcm4329-bt";
 869                 max-speed = <3000000>;
 870                 pinctrl-names = "default";
 871                 pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
 872                              &bt_reset &bt_wake>;
 873                 shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
 874                 device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
 875                 interrupt-parent = <&gph2>;
 876                 interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
 877                 interrupt-names = "host-wake";
 878         };
 879 };
 880
 881 &uart1 {
 882         status = "okay";
 883 };
 884
 885 &uart2 {
 886         status = "okay";
 887 };
 888
 889 &usbphy {
 890         status = "okay";
 891         vbus-supply = <&safe1_sreg>;
 892 };
 893
 894 &xusbxti {
 895         clock-frequency = <24000000>;
 896 };