char: ipmi: use DEVICE_ATTR helper macro
[linux-2.6-microblaze.git] / arch / arm / boot / dts / rv1108-elgin-r1.dts
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3 /*
4  * Copyright (C) 2018 O.S. Systems Software LTDA.
5  */
6
7 /dts-v1/;
8
9 #include "rv1108.dtsi"
10
11 / {
12         model = "Elgin RV1108 R1 board";
13         compatible = "elgin,rv1108-r1", "rockchip,rv1108";
14
15         aliases {
16                 mmc0 = &emmc;
17         };
18
19         memory@60000000 {
20                 device_type = "memory";
21                 reg = <0x60000000 0x08000000>;
22         };
23
24         chosen {
25                 stdout-path = "serial2:1500000n8";
26         };
27
28         vcc_sys: vsys-regulator {
29                 compatible = "regulator-fixed";
30                 regulator-name = "vsys";
31                 regulator-min-microvolt = <5000000>;
32                 regulator-max-microvolt = <5000000>;
33                 regulator-boot-on;
34         };
35 };
36
37 &cpu0 {
38         cpu-supply = <&vdd_core>;
39 };
40
41 &emmc {
42         bus-width = <8>;
43         cap-mmc-highspeed;
44         no-sd;
45         no-sdio;
46         non-removable;
47         mmc-ddr-1_8v;
48         mmc-hs200-1_8v;
49         pinctrl-names = "default";
50         pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
51         status = "okay";
52 };
53
54 &gmac {
55         clock_in_out = "output";
56         pinctrl-names = "default";
57         pinctrl-0 = <&rmii_pins>;
58         snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
59         snps,reset-active-low;
60         status = "okay";
61 };
62
63 &i2c0 {
64         clock-frequency = <400000>;
65         i2c-scl-rising-time-ns = <275>;
66         i2c-scl-falling-time-ns = <16>;
67         status = "okay";
68
69         rk805: pmic@18 {
70                 compatible = "rockchip,rk805";
71                 reg = <0x18>;
72                 interrupt-parent = <&gpio0>;
73                 interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
74                 rockchip,system-power-controller;
75
76                 vcc1-supply = <&vcc_sys>;
77                 vcc2-supply = <&vcc_sys>;
78                 vcc3-supply = <&vcc_sys>;
79                 vcc4-supply = <&vcc_sys>;
80                 vcc5-supply = <&vdd_buck2>;
81                 vcc6-supply = <&vdd_buck2>;
82
83                 regulators {
84                         vdd_core: DCDC_REG1 {
85                                 regulator-name= "vdd_core";
86                                 regulator-min-microvolt = <700000>;
87                                 regulator-max-microvolt = <1500000>;
88                                 regulator-always-on;
89                                 regulator-boot-on;
90                                 regulator-state-mem {
91                                         regulator-on-in-suspend;
92                                         regulator-suspend-microvolt = <900000>;
93                                 };
94                         };
95
96                         vdd_buck2: DCDC_REG2 {
97                                 regulator-name= "vdd_buck2";
98                                 regulator-min-microvolt = <2200000>;
99                                 regulator-max-microvolt = <2200000>;
100                                 regulator-always-on;
101                                 regulator-boot-on;
102                                 regulator-state-mem {
103                                         regulator-off-in-suspend;
104                                 };
105                         };
106
107                         vcc_ddr: DCDC_REG3 {
108                                 regulator-name= "vcc_ddr";
109                                 regulator-always-on;
110                                 regulator-boot-on;
111                                 regulator-state-mem {
112                                         regulator-on-in-suspend;
113                                 };
114                         };
115
116                         vcc_io: DCDC_REG4 {
117                                 regulator-name= "vcc_io";
118                                 regulator-min-microvolt = <3300000>;
119                                 regulator-max-microvolt = <3300000>;
120                                 regulator-always-on;
121                                 regulator-boot-on;
122                                 regulator-state-mem {
123                                         regulator-on-in-suspend;
124                                         regulator-suspend-microvolt = <3300000>;
125                                 };
126                         };
127
128                         vdd_10: LDO_REG1 {
129                                 regulator-name= "vdd_10";
130                                 regulator-min-microvolt = <1000000>;
131                                 regulator-max-microvolt = <1000000>;
132                                 regulator-always-on;
133                                 regulator-boot-on;
134                                 regulator-state-mem {
135                                         regulator-off-in-suspend;
136                                 };
137                         };
138
139                         vcc_18: LDO_REG2 {
140                                 regulator-name= "vcc_18";
141                                 regulator-min-microvolt = <1800000>;
142                                 regulator-max-microvolt = <1800000>;
143                                 regulator-always-on;
144                                 regulator-boot-on;
145                                 regulator-state-mem {
146                                         regulator-off-in-suspend;
147                                 };
148                         };
149
150                         vdd10_pmu: LDO_REG3 {
151                                 regulator-name= "vdd10_pmu";
152                                 regulator-min-microvolt = <1000000>;
153                                 regulator-max-microvolt = <1000000>;
154                                 regulator-always-on;
155                                 regulator-boot-on;
156                                 regulator-state-mem {
157                                         regulator-on-in-suspend;
158                                         regulator-suspend-microvolt = <1000000>;
159                                 };
160                         };
161                 };
162         };
163 };
164
165 &spi {
166         pinctrl-names = "default";
167         pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>;
168         status = "okay";
169
170         dh2228fv: dac@0 {
171                 compatible = "rohm,dh2228fv";
172                 reg = <0>;
173                 spi-max-frequency = <24000000>;
174                 spi-cpha;
175                 spi-cpol;
176         };
177 };
178
179 &u2phy {
180         status = "okay";
181
182         u2phy_host: host-port {
183                 status = "okay";
184         };
185
186         u2phy_otg: otg-port {
187                 status = "okay";
188         };
189 };
190
191 &uart0 {
192         pinctrl-names = "default";
193         pinctrl-0 = <&uart0_xfer>;
194         status = "okay";
195 };
196
197 &uart2 {
198         status = "okay";
199 };
200
201 &usb_host_ehci {
202         status = "okay";
203 };
204
205 &usb_host_ohci {
206         status = "okay";
207 };
208
209 &usb_otg {
210         status = "okay";
211 };