Merge branch 'printk-rework' into for-linus
[linux-2.6-microblaze.git] / arch / arm / boot / dts / rockchip-radxa-dalang-carrier.dtsi
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
4  * Copyright (c) 2019 Radxa Limited
5  * Copyright (c) 2019 Amarula Solutions(India)
6  */
7
8 #include <dt-bindings/pwm/pwm.h>
9
10 / {
11         clkin_gmac: external-gmac-clock {
12                 compatible = "fixed-clock";
13                 clock-frequency = <125000000>;
14                 clock-output-names = "clkin_gmac";
15                 #clock-cells = <0>;
16         };
17
18         vcc12v_dcin: vcc12v-dcin-regulator {
19                 compatible = "regulator-fixed";
20                 regulator-name = "vcc12v_dcin";
21                 regulator-always-on;
22                 regulator-boot-on;
23                 regulator-min-microvolt = <12000000>;
24                 regulator-max-microvolt = <12000000>;
25         };
26
27         vcc5v0_sys: vcc5v0-sys-regulator {
28                 compatible = "regulator-fixed";
29                 regulator-name = "vcc5v0_sys";
30                 regulator-always-on;
31                 regulator-boot-on;
32                 regulator-min-microvolt = <5000000>;
33                 regulator-max-microvolt = <5000000>;
34                 vin-supply = <&vcc12v_dcin>;
35         };
36
37         vbus_host: vbus-host {
38                 compatible = "regulator-fixed";
39                 pinctrl-names = "default";
40                 pinctrl-0 = <&usb1_en_oc>;
41                 regulator-name = "vbus_host"; /* HOST-5V */
42                 regulator-always-on;
43                 vin-supply = <&vcc5v0_sys>;
44         };
45
46         vbus_typec: vbus-typec {
47                 compatible = "regulator-fixed";
48                 pinctrl-names = "default";
49                 pinctrl-0 = <&usb0_en_oc>;
50                 regulator-name = "vbus_typec";
51                 regulator-always-on;
52                 vin-supply = <&vcc5v0_sys>;
53         };
54 };
55
56 &gmac {
57         assigned-clock-parents = <&clkin_gmac>;
58         clock_in_out = "input";
59         phy-mode = "rgmii";
60         pinctrl-names = "default";
61         pinctrl-0 = <&rgmii_pins>;
62         snps,reset-active-low;
63         snps,reset-delays-us = <0 10000 50000>;
64         tx_delay = <0x28>;
65         rx_delay = <0x11>;
66         status = "okay";
67 };
68
69 &hdmi {
70         status = "okay";
71 };
72
73 &pwm0 {
74         status = "okay";
75 };
76
77 &pwm2 {
78         status = "okay";
79 };
80
81 &sdmmc {
82         bus-width = <4>;
83         cap-mmc-highspeed;
84         cap-sd-highspeed;
85         disable-wp;
86         vqmmc-supply = <&vccio_sd>;
87         pinctrl-names = "default";
88         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
89         status = "okay";
90 };
91
92 &uart0 {
93         pinctrl-names = "default";
94         pinctrl-0 = <&uart0_xfer &uart0_cts>;
95         status = "okay";
96 };
97
98 &uart2 {
99         status = "okay";
100 };
101
102 &vopb {
103         status = "okay";
104 };
105
106 &vopb_mmu {
107         status = "okay";
108 };
109
110 &vopl {
111         status = "okay";
112 };
113
114 &vopl_mmu {
115         status = "okay";
116 };